AT & T Communication Manager

Similar Questions

• Error 'not a WIN32 application valid' when you install 7.2.610 Communication Manager

  Original title:

  I try to install 7.2.610 Communication Manager that I downloaded on my desktop of AT & Ts Web site.

  When I try to run the file, I get the message that it is not a valid WIN32 application.

  I am running Vista.

  Hello

  1. is specific to this particular application question?

  2 have you made any changes to the computer, before the show?

  This problem may be caused by one of the options below.

  I. file is corrupted, missing, or bad.

  II. file is not designed for your version of Windows.

  Incompatibility III. material.

  Method 1:

  Run this fixit and check.

  Solve problems with programs that cannot be installed or uninstalled

  Method 2:

  Download a different copy of AT & T Communication Manager 7.2.610 and check.

  http://www.Wireless.att.com/businesscenter/en_US/Download/ACM-7-02-610.exe

• communication manager fails after installing vista 64 sp1__

  communication manager fails after installing the vista 64 sp1. If I try to uninstall the sp that the entire system crashes

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Error 507 for blackBerry Smartphones and RIM Handheld Communications Manager

  I tried to download the latest version of the app world and bbm. But would not load. Received error message 507.

  Tried reloading software but would not let me connect because of RIM Handheld Communications Manager wouldn't let me...

  Any ideas how I can get my bb working again. Never go wrong with a cell phone before. Terrible service of bb.

  Nathan

  Error 507 means that the device doesn't detect any operating system installed on the device.

  See the link below to download it and follow these simple instructions.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

  VIA | JSanders

  http://supportforums.BlackBerry.com/T5/BlackBerry-device-software/error-507-reload-software/m-p/1477...

• QuickSet C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  All,

  I am trying to record a QuickSet C20 with the following scenario:

  Endpoint registration C20 (software: TC5.0.0.273156) in 8.6.2.20000 - 2 Communications Manager using the SIP protocol.

  My URI format is: [email protected] / * / (the IP address of the CUCM)

  I tried different settings in CUCM and QuickSet C20, but without success.

  Status in CUCM:

  Inscription: unknown
  IP address: unknown

  Status in C20 QuickSet:

  Failure / failed to save. Unprotected. Unverified.

  Note: The C20 QuickSet Gets the correct IP address.

  Can someone help me?

  Waiting,.

  Lucian Medeiros

  I would try to use the version of the following software:

  cmterm - s52000tc5_1_0_280662.cop.sgn

  Downloadable at:

  http://www.Cisco.com/Cisco/software/release.html?&mdfid=283613658&CATID=280789323&softwareid=280886992&release=TC5.1.0-CUCM&rellifecycle=&relind=available&RelType=all

  Not to mention that I would look at:

  http://www.Cisco.com/en/us/products/ps11424/prod_maintenance_guides_list.html

  In particular:

     http://www.Cisco.com/en/us/docs/Telepresence/endpoint/codec-c-series/TC5/administration_guide/cts_endpoint_administration_ucm86_quick_start_guide_tc51.PDF

• Adding a Cisco SX20 to Communications Manager version 10.5

  Hi all!

  Can someone help me, I try to save my end SX20 CUCM version 10.5 point.

  Do you have a procedure that can show me how to do this configuration?

  TKS,

  CB

  Try this:

  http://www.Cisco.com/c/dam/en/us/TD/docs/Telepresence/endpoint/codec-c-s...

  Sound for the most part similar to CUCM 10.5. A parameter is activated early to offer on the SIP profile, make sure that you select best effort.

• Error 1316: a network error has occurred trying to read the C:/windows/installer/Setup.msi__trying file for uninstall Manager communication at & t

  uninstallation of at & t communication manager

  https://www.wireless.att.com/support_static_files/KB/KB79807.html

  http://www.wireless.att.com/answer-Center/solutionDisplay.jsp?SolutionID=KB79807

  Read the above.

  See you soon.

  Mick Murphy - Microsoft partner

• Manager of Communications cell phones blackBerry Smartphones RIM has stopped working

  Hello

  Today, I found my trackpad on my BB9900 had ceased to work for any scrolling. I could still use it as a button to select something, but not to move. So after the reboot to check that I had installed any new software or applications during the last month or so and even pulling the battery... I know that I know that it still did not work.

  I then plugged on my laptop to try reloading software. When I did he wanted to update BB Desktop Manager. So of course I did. (BTW the BB connected at this stage) After the update when you try to connect the BB all I get is this error "RIM Handheld Communications Manager has stopped working". I restarted the laptop and the BB just to be sure, but nothing. Now, I have a BB that doesn't scroll and BBDTM which does not connect. Advice?

  

  Either by the way, I also tried changing trackpad sensitivity and turning on an audible scroll but it did not a difference, nor I heard no sound scroll.

  Thanks in advance!

  BB9900

  s/w bundle 7.1 device 2108

  DTM v7.1.041 bundle 42

  remove the current desktopmaneger

  Delet motion of c program files/commonfiles/reserch /.

  and re install the latest Desktop Manager is 100% solved enjoy ping

• HP Compac 8200 Elite: Lack of communication Simple PCI driver Code 28

  Problem is I reinstalled Win 7 Pro 64-bit and that you have installed the most all the drivers and it seems to work well, with the exception of the Windows and update in device under the other controller of communication manager simple PCI devices miss a Code 28 driver, I read that I have perhaps need the hardware ID to get a driver so here it's PCI VEN_8086 & DEV_1C3A & SUBSYS_1495103C & REV_04

  PCI\VEN_8086 & DEV_1C3A & SUBSYS_1495103C

  PCI\VEN_8086 & DEV_1C3A & CC_078000

  PCI\VEN_8086 & DEV_1C3A & CC_0780

  Thank you

  Pat

  Hello:

  You need the driver for this device...

  This package contains the driver Intel Active Management Technology (AMT) for the supported models running a supported operating system.

  FTP://ftp.HP.com/pub/SoftPaq/sp69501-70000/sp69506.exe

  I have two 8200 Elite CMT is then I know this is the driver you need...

• responsible for communication ATT does not properly

  says it can't find the program. my computer is slow need to re - install att responsible communication.

  Hello

  1. you remember to make changes to your machine before the problem?

  Follow the steps below and check if the problem persists.

  Step 1:

  I suggest that you put your machine in a clean boot State and launch AT & T communication manager and check if the problem persists. I suspect involvement of conflict of software of third party causing the problem to occur. Clean boot helps eliminate conflicts of third party software.

  Note: Do not forget to start your computer in normal mode.

  Step 2:

  Uninstall and reinstall AT & T communication manager and check.

  Reference:

  http://www.wireless.att.com/answer-Center/solutionDisplay.jsp?SolutionID=KB99310
  http://www.wireless.att.com/answer-Center/solutionDisplay.jsp?SolutionID=KB93059

  See also:

  http://www.wireless.att.com/businesscenter/solutions/wireless-laptop/communication-manager/index.jsp

  https://www.wireless.att.com/support_static_files/KB/KB85112.html

• Users hear MoH when RTC hang up communication

  IP phones begin play at the Ministry of health when the PSTN phone hangs up. After hearing the Department of health for about 10 seconds, the call disconnects.

  The system is CUCM v10.5.1. The PSTN gateway is a 2951 (IOS 15.4 (3) M) with T1 - PRI related CUCM by SIP trunk.

  If the call comes from PSTN internal IP Phone, then RTC hang up, IP phones will hear the Department of health for 10 seconds. Wireshark on phone shows that the Sub CUCM sends a guest of the SIP - SDP Protocol to the IP phone. It gets finally a BYE 10 seconds later.

  If the call is launched with phone IP and PSTN hang up, then call end as usual. Wireshark shows that the CUCM subscriber sends a SIP BYE on the phone.

  In both cases, debug the CCSIP Messages on the bridge which shows the gateway sending a SIP BYE to the Subscriber and the Sub you immediately respond with OK

  SIP Trunk gateway and phone enter the same peripheral pool CUCM and Subscriber. Device pool has MRGL with the MTP software and hardware. This happens with SIP and SCCP phones. I'm not requiring the SIP Trunk to use MTP

  Any ideas?

  Thank you, Randy

  Hello

  Is the phone you are calling is added as a remote destination on CUCM for unique number?

  According to the guides of the options:

  When the remote destination is hung up, Cisco Unified Communications Manager puts the related state of hold office phone, allowing the user to resume the call by pressing the resume button.

  Aseem

• 6120 link down on mgmt0 triggers not UCS Manager failover cluster - is?

  Hello friends

  We have recently installed a cluster consisting of two 6120 UCS s configured for HA. When executing fail during test cases, we removed the network cable in mgmt0 on 6120 elementary. Immediately the cluster IP address is not responding ping (as expected) and we lost connectivity to the UCS Manager GUI (also as expected.) At one point, however, we expected the 6120 subordinate to detect that this link was down and launch a failure over the UCS. This is not moved after 20 minutes of waiting.

  My questions are the following:

  1. Is this expected behavior?
  2. If this is not the case, what should us review to ensure that failover occurs in the future?

  I know we can force a failover of the subordinate by issuing a command to the main cluster of local-mgmt but would be interested to see if it should be automatically produced on the failure of primary mgmt0 binding.

  Thank you for your time.

  Configured by default which is the expected behavior.

  You can configure management interface and failover if the management interface loses connectivity such as your test scenario.  That's what you're looking for.

  Admin - Communication Management - Management Interfaces - Management Interface tab strategy control tab.

  

  Kind regards

  Robert

• Cisco Call Manager

  Hi, I want to know whether or not our current phone system uses the CCM? Unfortunately, I know that even with our systems and next thing I know, it's that use us Cisco Configuration Professional utility to configure the phone display names and update the date & time.

  Could someone provide me with the steps to check if we use CCM/CUCM? Sorry to be a beginner.

  Call Manager Express, another acronym which is CUCME - Cisco Unified Communications Manager Express.

  CME/CUCME is function of the router, you can access it via telnet/ssh.

  CUCM can be access through GUI and SSH.

  Kind regards

  Mohammed Noor

• Cisco UCS-C210 M1 accredited for Unified Communications server

  Hello:

  Our VAR tells us that HP and Cisco are splitting up.  We are an HP store today and 7800-H series MCS routers were a perfect fit.  Our VAR tells us now that he must go with the renamed IBM systems.  BUT I would avoid the IBM servers.  And attractive servers Cisco.  But I have been unable to determine if the Cisco UCS-C210 M1 server is certified for various applications of Unified Communications (Manager of Communications, unity, Cisco Emergency Responder, ICM, CVP, etc.).

  Has anyone heard of Communications deployments unified on the hardware of the UCS?

  Thank you

  Ken

  UCS blades are being qualified for management of the applications of the CPU now. The qualification of rack mount server is expected, specifically the C210 later this summar I think.

• VMware vCenter Site Recovery Manager Server services stop auto

  SERVER VMWARE VCENTER SITE RECOVERY MANAGER, service stops automatically.

  Section of VMware vCenter Site Recovery Manager, pid = 2084, version = 4.0.0 build = build-192921, option = released
  [2010-12-19 08:39:33.595 06868 WARNING "App"] Cannot create the writer console
  [2010-12-19 08:39:33.611 04220 info "App"] Set of dump dir "C:\Documents and Settings\All Users\Application Data\VMware\VMware vCenter Site Recovery Manager\DumpFiles"
  [2010-12-19 08:39:33.611 04220 info "App"] The initialization of the DBManager
  [2010-12-19 08:39:33.736 04220 info "App"] Current working directory: C:\Program VMware vCenter Site Recovery Manager\bin
  [2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] TaskMax = 10, IoMin = 1, IoMax = 21
  [2010-12-19 08:39:33.736 04220 verbose "ThreadPool"] Definition of MTA COM threading model
  [2010-12-19 08:39:33.736 04220 info "App"] Try DrExternalRecoveryApi
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 0: dr-external-recovery - api dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 0: C:\Program VMware vCenter Site Recovery Manager\bin\dr-external-recovery-api.dll
  [2010-12-19 08:39:33.736 04220 info "App"] Try RecoverySecondary
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 1: dr-secondary - recovery.dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 1: C:\Program VMware vCenter Site Recovery Manager\bin\dr-secondary-recovery.dll
  [2010-12-19 08:39:33.736 04220 info "App"] Try SanProvider
  [2010-12-19 08:39:33.736 04220 verbose "App"] Plugin path 2: dr - san - provider.dll
  [2010-12-19 08:39:33.736 04220 verbose "App"] Absolute path of the plugin 2: C:\Program VMware vCenter Site Recovery Manager\bin\dr-san-provider.dll
  [2010-12-19 08:39:33.767 04220 'Local' info] Created from the ./locale/ locale subsystem with in default locale.
  [2010-12-19 08:39:33.783 04220 info "SrmServiceInstance"] DrExtApi Instance of Service is initialized.

  Post edited by: a.p. (VMware Community Manager)

  Moved to the 'Site Recovery Manager' forum and edited the object line to fix the formatting

  While I can't give you a solution, I can share that I had a similar problem with an SRM installation.  Like yours, mine was a working facility which, for some strange reason, began to exhibit the same symptoms.  Start the service, in a second or two, stopped service.

  I opened a ticket with VMware on the issue and in more than three months of back and fourth Exchange with various Tech support I have ever received a satisfactory answer on what caused it.  The 'solution' they gave me was to remove the database SQL RS and re - install SRM.  This 'solution' has worked, but if this question comes up, I'll probably have to back unpleasant, emphasizing the fact that they solve the problem.

  I wish I could be more help, but that's it.  I feel your pain.