BB vs BB 8820 8830 blackBerry smartphones

Similar Questions

• BlackBerry Sprint 8830 BlackBerry Smartphones - how reach us mode debugging...?

  I searched for two days in the world and cannot locate how we enter in to the way of debugging on the 8830.

  I need to access the Ec/lo Rx and the SID #, currently I can get on the home screen signal strength by pressing the ALT + NMLL (changes the graphics signal to digital, i.e. - indicator 80)

  Please, I could really use some help with this so we can diagnose repeaters on our campus for the company.

  Thank you

  J

  Well, to answer my own question, I now found the answer.

  Unfortunately, the 8830 and some other newer BlackBerrys do not easy to get this type of technical information.

  You must:

  1. Have a login/password to https://www.blackberry.com/EngineeringScreens/ (last updated 05/30/2008)
  2. On the BlackBerry meadows ALT + CAP + H and leave it on this screen.
  3. Once connected to the # 1 link, you will be asked to enter your PIN code #, Uptime and postal code of the corresponding to your device.
  4. You will then receive an unlock code that is specific to this information (if you leave this on the blackberry help screen, the number of operating time will be different, so your code will be different.)
  5. Then enter the code for unlocking on BlackBerry, now the ALT key for numbers, the capitals are not necissary.
  6. This will give you access to the app Mode Trace Engineering
  7. 'Radio Engineering' selection screen
  8. Select screen "CDMA Engineering"
  9. Select "Operational information" (ec/io of 2nd line 3rd line rss)
  10. Scroll down to 'Neighbor set details' and get 1st line driver active, 2nd to the 20th will give nearby sites with ec/io for each.

  * Copy the following code will work for 30 days, then you will need to get a new code in the same way.

  I hope this helps everyone!

• BlackBerry 8830 Blackberry Smartphones does not illuminate

  Problems with my blackberry. Tech support says updated new software.

  So I pulg it updates in, deceased. After a bit, I get "Unable to reconnect to the device during a multi-stage load operation."  from the Desktop Manager and blackberry are turned off.

  I can't turn on my Blackberry. I get x 2 fast red blinks on the led and that's it.

  I used x 3 Chargers and replaced the battery with a fully charged battery to check to make sure that the battery was not weak. I pressed every button for 2 minutes and nothing.

  How to make it back on?

  The red LED flashes, you will need to clean and reload the operating system.

  Here are the instructions.

  You will need to use JL_Cmder to wipe the device and then load the operating system on the device. Follow the instructions here:

  http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F

  If JL_Cmder does not work, follow this instruction:
  http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

• Delete messages to from a blackberry 8830 blackBerry Smartphones

  Is there a way to delete a message in Microsoft Outlook and deleted it on the Blackberry?

  If you under BIS not BES Yes.

  BIS - BlackBerry Internet Service = e-mail service provided by the respective carrier. AT & T, Verizon, T-Mobile, Rogers, etc, etc...

  BES - BlackBerry Enterprise Server = email service provided by a server managed by a company. For example, by your employer...

• BB 8830 blackBerry smartphones - "Eception exception: net.rim.device.api.system.controlled access exception.

  I bought a stowaway Shasta Bluetooth keyboard to use with my BB 8830. I installed the driver and software on the BB, but get the "Eception exception: net .rim... warning exception and crashes the program.» I just uninstalled my BB, reinstalled the latest version of the OS and reinstalled my applications. The problem is still there. No idea how I can eliminate the issue? Thanks in advance for your help.

  Maxxasman

  I went on the site and found the latest driver and software for the keyboard. Everything works! Thank you for helping me resolve this issue!

  Rich

• BlackBerry 8830 Blackberry Smartphones

  Hello people

  I just install BES Office Manager and now every hour or so to get about 80-85 e-mail

  as per below.

  How it stop doing that? Help

  This message is used to carry data between your BlackBerry handheld and a home server. Please do not delete, move, or reply to this message - it will be processed by the server.

  BEGINETP 202

  AUfVE00AAAAAIBAIMzAxOUZENEEgF2pxdWludGFsQHJveWFsbGVwYWdlLmNhAKGNU0ZQBUNJ

  Q0FMA0CAgICBCgAAMEU4OTMwMDVGK0crMQAfjFhVpboD7MQiIpYquI7ZABmz9qSp2i53DWWR

  EJVNFDfAkr3OFvWdhpSNEjzqzirPAG51zXK7f/yJBeCWL5Sli/uItZ5NGELqU96g6B6s35R7

  yBurtAz4OU7GcXqFm0byIy/LxgBcYjZ1DoQZ + 0nXT0ejbMS8y6cxbw!

  ENDETP-474288244

  A common reason: you have installed Desktop Manager by using the option "Desktop Redirector.

  Step 1: If you are not using redirector, you must uninstall Desktop Manager, and then reinstall it using the BlackBerry Internet Service option.

  Step 2: On your device, go to: Options > Advanced > maintenance book and remove any service books for [office]

• BlackBerry 8830 default smartphones

  I replaced my 8830 with a HTC EVO.  I want to send the 8830 for my granddaughter, so she can activate on its local network of Sprint.

  How to reset the phone to factory default?  This is version 4.2.

  Basically what you want to do, is do a wipe of the device security...

  Article ID: KB28225 BlackBerry Smartphone must be wiped before transferring the security property

  Read this article from RIM's Knowledge Base to reset your device to factory settings.
  KB18998 How to reset a factory default BlackBerry smartphone

• BlackBerry smartphones remove security settings of 8820 without access to PC

  I recently acquired a 8820, but I can't remove the security settings.  I'm currntly do not have access to a PC to connect the device to.  is there a way to delete the settings?  Thank you.

  Hello and welcome to the community!

  Exactly what 'security settings' you are asking about? Only these words, there are a lot of possibilities...

  My guess - if your BB has a policy due to have been associated with a BES environment

  • KB30076 How to check for an it on a BlackBerry smartphone policy

  and if you want that political removed, then see this KB:

  • KB14202 How to remove a policy from IT to a BlackBerry smartphone

  You will notice that methods 1, 2 and 3 require the admin BES to do something... If you are no longer associated with the BES, then these methods do not work, which leaves... method 4 not requiring connection to a PC.

  On the other hand, if I guessed wrong, then please specify exactly what 'Security Settings' you're curious about.

  Thank you and let us know!

• Update blackBerry to 4.5 8820 t - mobile Smartphones

  I completed the steps to prepare for an upgrade to 4.5.

  • Upgrade to the version of desktop manager 4.7
  • Full backup of the device
  • Delete the vendor.xml file
  • Downloaded the file 8820 of Rogers. 8820M_PBr4 filename [1].5.0_rel108_PL2.7.0.78_A4.5.0.81_Rogers.exe
  • East went to the site update 4.5 blackberry and typed my PIN code.  He said - your carrier does not support 4.5 (t-mobile)
  • Went to t - mobile.com / bbupgrade no luck there, only 4.2.2 is supported.

  So, that's the next step?  Double click simply on the 80 MB. EXE file that I downloaded? If t-mobile does not support 4.5 so it's a useless exercise?  What about all these cool new features of mail electronics html?  I would like to hear if anyone has done this on t-mobile specifically.

  Thank you

  John

  The version of Desktop Manager shouldn't matter. I always use 4.2. Here are the steps:

  Download the OS 4.5 from: https://www.blackberry.com/Downloads/entry.do?code=72DA7FD6D1302C0A159F6436D01E9EB0

  Run the Setup for the software Assistant, and then delete the vendor file in c:/program files/common files/research in motion/apploader.

  1. Open BlackBerry Desktop Manager.
  2. Connect the BlackBerry smartphone to the computer.
  3. If you are prompted, type your BlackBerry smartphone password and then click OK.
  4. Do one of the following steps:
     • If the Application updates available window click on update now. The Application Loader Wizard appears.
     • If the Application updates available window does not appear, double-click The Application Loader icon. The Application Loader Wizard appears.
  5. Click Next.
  6. If you are prompted, type your BlackBerry smartphone password and click Next.

     Note: when the Application Loader Wizard has completed the review of the configuration on the BlackBerry smartphone, the device application selection screen appears listing the applications available for installation. The selected check boxes show the applications already installed on the BlackBerry smartphone.

  7. Select the check box for the BlackBerry Device Software.
  8. Click Next.
  9. If the screen on the device backup appears, choose to automatically back up the BlackBerry smart phone, and then click Next.
  10. Click Finish to start loading the software to the BlackBerry device.
  11. Click close when the software is finished loading.

• Unlocking blackBerry Smartphones 8830 World Edition GSM and code provider

  Hello

  I'm a guy unsavvy tech and have an 8830 World Edition phone. Bought this from Auntie Indicom (Vendor ID: 269), a CDMA operator which also provided a GSM SIM for only international roaming. Last month, number portability Mobile came into India, and I went to a GSM provider, Vodafone India. After the transfer of numbers, simply inserted the new Vodafone SIM and the phone and Blackberry services are working well with the new operator. Two questions:

  1. from the Options-> advanced-> SIM card Options, after typing MEPD, I see:

  ID: a large number

  Customization:

  Disabled SIM

  Active network

  Network subset disabled

  Service Provider disabled

  People with reduced mobility

  Does this mean that my Blackberry is locked? If Yes, is it blocked by Vodafone? Given that I have moved the Auntie service provider Vodafone and does not seem to wear the same number on the same phone, aunt locked the phone.

  2. type Alt-EACE, I always see the Vendor ID 269 (Auntie). See also the logo of Auntie initially upwards. Is it possible that I can change the ID of the seller or at least stop getting the start screen for the old vendor? This ID Vendo has something to do with the above-mentioned lock?

  Would be very grateful if some kind soul illuminates.

  Thank you

  Paul

  India

  There must be something different on a BB WE that allows the use of other SIMs, though always stuck at home carrier. Odd, but your experience proves the theory. I seriously doubt that release will make a difference, but certainly to try I guess.

  I don't know why your BB is as you describe... but, I want to propose the following steps, in order, even if they seem redundant to what you have already tried. However, you want to be careful here. I don't know how you originally got your BB running services on your current operator. All BB services are controlled by the Service books. If a carrier does not natively support a BB model on their network, there are a few things that need to be taken to get these SBs on than non-native BB. If only it had to do, don't go here... you could just wipe out all your services level of BB. But if none of these tricks are required (which would mean that your carrier supports natively your BB model), then you should be safe to go ahead.

  Steps 1 and 2 each should translate into a message to your BB to come:

  (1) registry HRT

  • KB00510 How to register a BlackBerry smartphone with wireless network

  (2) Service reference books

  • KB02830 Send the directories for the BlackBerry Internet Service

  (3) restart to take batt

  • Each time a random strange behavior or slow creeps, the first thing to do is a battery pop reboot. With power ON, remove the hood back and remove the battery. Wait a minute, then replace the battery and cover. Power on and wait patiently through the long reboot - about 5 minutes. See if things return to functioning. Like all computing devices, BB suffers from memory leaks and others... with a hard reboot is the best remedy.

  Maybe it will make a difference. I really do not know about you, to be honest. It's a tricky business, and you can well serve just as well by getting a new BB you get from your carrier... which by the way, you would have at least that the formal support at your disposal channel.

  Good luck!

• BlackBerry Smartphones Desktop software version corresponding device OS version?

  Hello and good day,

  I am very new to blackberry.  I just got a 8830.  I'm getting ready to download the Desktop Manager and was wondering if (since the OS on my device is v4.2.2.123), if I have to only download the desktop v4.2 Manager... or can I get 4.5 or 4.6?  Also, I downloaded the upgrade for take my OS v4.2.2.196 device so I can use a full 8 GB card.  Tips on how to install this on my device (it's currently just on my desktop where I downloaded it)?  Thanks for your time and patience and have a great day!

  BP

  There is no relationship with device software and desktop manager version. You can download and use the updated 4.6 with your Blackberry.

  Check the steps below for OS - upgrade

  Step #1

  Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

  Step #2

  Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

  Step #3
  

  Users can perform a full or selective data backup by using the tool of backup and restore in BlackBerry Desktop Manager using the following steps:

  1. Connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager.
  2. Open BlackBerry Desktop Manager.
  3. Double-click on the backup and restore.
  4. Select backup to perform a full backup or select Advanced to make a backup of specific databases.
  5. Choose a location to save the backup file, and then click Save.

  Step #4

  To perform a clean installation of the BlackBerry Device Software, do the following:

  1. Connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager.
  2. Double-click The Application Loader icon.
  3. Click Next to start the installation process.
  4. Type your BlackBerry smartphone password, if prompted, and then click OK.
  5. Click on the checkboxes corresponding to the names of the applications you want to load, and then click Next.
  6. Click Advancedand then click the check box next to delete all already installed applications.
  7. Click on Next.
  8. Click the check box next to do not automatically back up the application during the process of loading data.
  9. Clear the check box next to the backup and restore applications installed wireless.
  10. Click Next > Finish.
  11. Once the process is complete, the load succeeded message. Click close to return to BlackBerry Desktop Manager.

• BlackBerry Smartphones Email receipts

  I have a BB 8830, my frustration is that when I send an email from my BB or my account gmail online I always receive an email from myself of what I just sent.  How can I stop it?

  Cause of the problem

  Webmail Gmail accounts were not separate sent items and Inbox folders. The web page of Gmail account contains a Messages link on the left side, but is not a folder separate from the Inbox. Webmail gmail messages are grouped into conversations, which leads to all messages sent and responses of others appearing as an entry of a single e-mail message in the Inbox. This allows to easily read and look on the web page of Gmail, but, when it is integrated with the BlackBerry Internet Service account, results in copies of sent e-mails on the BlackBerry smartphone as new e-mail messages.

  Resolution

  To prevent messages sent back to the BlackBerry smartphone each time, create a filter in the BlackBerry Internet Service account to block sending these messages to the BlackBerry smartphone.

  To create a filter, follow these steps:

  1. Connect to the BlackBerry Internet Service account. For instructions on how to connect to the BlackBerry Internet Service account, see KB03781.
  2. Click the icon of filters next to the built-in Gmail account.
  3. To create a new filter, click Add a filter .
  4. Configure the filter to ensure that messages are not sent to the BlackBerry smartphone if the message coming from the integration of webmail Gmail account:

  • Type a name for the filter in the filter name field. For example, my messages to email Gmail.
  • Assign to the field filter to apply when 'FROM' field.
  • In the contains field, type the address of the Gmail webmail. For example, @gmail.com >.
  • Select the next radio button of do not forward messages to unit.
  • Click on add filter.

  Note: After you create this filter, e-mail messages will not be received on the smartphone BlackBerry if sent to the Gmail webmail account.

  Source: KB10332 (with explanatory diagram)

• BlackBerry Smartphones Support for the codec H.264 in OS version 4.5

  Hello

  I am a novice in the field of Blackberry. I recently acquired a BB 8820 phone. The version of the OS is 4.2.2.116. I would like to access H.264 videos on my phone. Will be updated to OS v4.5 help?

  Is another issue a 4.7 OSv? If so where can I download it?

  Thanks in advance

  Etienne

  Etienne says:

  Thanks a lot for your answer. But the 4.5 upgrade will solve my goal?

  Etienne

  I don't think so. The following article can help you to be sure.

  http://www.BlackBerry.com/BTSC/KB05482
  Media types supported on the BlackBerry smartphone

• BlackBerry smartphones how stop SPAM?

  My business has migrated to Exchange to Google Mail.  I have disabled the link between Exchange and my 8820, then GMail App. installed Google Viola, my GMail is synced with my BB.  So I downloaded Google Sync to get my calendar to synchronize, but now I get hundreds of emails from 'network '.  I found a few articles from the KB and tried these, but the instructions do not match my menu options.  How to stop the madness?

  Normal 0 false false false MicrosoftInternetExplorer4 st1\:*{behavior:url(#ieooui)} / * Style Definitions * / table. MsoNormalTable {mso-style-name: "Table Normal" "; mso-knew-rowband-size: 0; mso-knew-colband-size: 0; mso-style - noshow:yes; mso-style-parent:" ";" mso-padding-alt: 0 to 5.4pt 0 to 5.4pt; mso-para-margin: 0; mso-para-margin-bottom: .0001pt; mso-pagination: widow-orphan; do-size: 10.0pt; do-family: "Times New Roman"; mso-ansi-language: #0400; mso-fareast-language: #0400; mso-bidi-language: #0400 ;} "}

  Step 1

  ----------

  All the books of office service remove the BlackBerry smartphone.

  1. in the start screen on the BlackBerry smartphone, click Options

  2. click on Advanced Options

  3. click on maintenance book

  4. in the list of service books, select the desktop [CMIME] service book

  5. display the menu and select Remove

  6. in the list of service books, select the desktop [CICAL] service book

  7. display the menu and select Remove

  Step # 2

  ----------

  If installed desktop manager with option integration with "Blackberry Enterprise Server or BlackBerry Desktop Redirector" then it could happen. If either of the e-mail or redirector settings is displayed, BlackBerry Desktop Manager to uninstall or change the configuration of the BlackBerry Desktop Manager to support the BlackBerry Internet Service.

  In your PC Go to Control Panel -> click on Add/Remove Programs -> select Blackberry Desktop Manager -> click on Change/Remove -> click on modify-> then select the check box for Enterprise Server/redirector instead check the box next to Blackberry Internet Service.

  This should solve the problem.

• HELP blackBerry Smartphones: Crash when Terminal upgrade... My BB8820 dead?...

  Hello

  The BB Desktop manager crashed during the upgrade of my BB 8820 terminal (Internet Explorer script error messages)... Now my BB is like stop and blinks RED...

  What can I do to restart?... He finally died?

  Help, please...

  Thank you...

  JL_cmder to wipe your device OS. Click this link for more details.

  Check the steps below to update OS by installing device OS in the PC-

  Step #1:

  Before you begin, make sure that BlackBerry Desktop Software is installed on the computer.

  Step #2:

  Make sure that you have installed the software for device updated on your computer. Visit this link to get the software for device update the carrier OS download site.

  Step #3:

  Users can perform a full or selective data backup using the backup and restore tool in BlackBerry Desktop Manager using the following steps:

  1. connect the BlackBerry device to the computer that is running BlackBerry Desktop Manager

  2. open the BlackBerry Desktop Manager

  3. double-click on Backup & Restore

  4. Select backup to perform a full backup or select Advanced to make a backup of specific databases

  5. choose a location to save the backup file, and then click Save

  Step #4:

   

  To perform a clean installation of the BlackBerry Device Software, do the following:

  1. connect the BlackBerry smartphone to the computer and open BlackBerry Desktop Manager

  2. double-click on the icon of The Application Loader

  3. click on next to start the installation

  4 type your BlackBerry smartphone password, if prompted, and then click OK

  5. click on the check boxes corresponding to the names of the applications you want to load, and then click Next

  6. click on Advancedand then click the check box next to erase all applications already installed.

  7. click Next.

  8. click on the check box next to of not automatically backup the application during the process of loading data

  9. clear the check box next to the backup and restore applications installed wireless

  10. click on Next -> Finish

  11. once the process is complete, the load succeeded message

  12. click close to return to BlackBerry Desktop Manager.