BB10 Simulator orientation change?

Similar Questions

• The adjustable BB10 Simulator it is date and time automatically?

  I have the installer of BB10 Simulator (10_2_1_2234) and works generally well on my Mac OSX (10.9.2 Maverics) system using VMWare Fusion 6.0.2 (1398658).  Everthing is in the latest versions as far as I can tell.

  However, even if in the settings / Date and time, the "Set Date and time automatically" switch to "On", whenever I start it, it displays the last time I used it.

  I need to manually enter settings / Date and time, turn the "Set Date and time" automatically to 'Off', set the date and time manually, then I turn the "Set Date and time automatically" button return to 'On '.

  My application itself is able to send and receive data over the network.  I can use the "Browser" application to see the web sites.

  How can I do set the date and time automatically?  Y at - it VMWare Fusion setting, I need to change?

  Thank you

  Ed Federmeyer

  If you resume your virtual machine session, the time that the virtual machine has been suspended is used.  If you "Power Off" the simulator it will update it's time to start.

• Image of the scale when screen orientation change

  I'm putting an image when screen orientation change, I put the logic based on sublayout. However, it is called no effect. It works fine the first time. Then, when I incline simulator, not touch.

  BitmapField private;

  protected void sublayout (int maxWidth, maxHeight int ) {}

  Super.sublayout (maxWidth, maxHeight);

   

               if (width == Display.getWidth ())

  {

                  return;

  }

  on the other

  {

  width = Display.getWidth ();

  ctrHeadImg = ctrHeadImg.scaleImage32 (scaleXFixed32, scaleYFixed32);

  a = new BitmapField();

  a.setBitmap (ctrHeadImg.getBitmap ());

  loaded;

  layoutChild (, a.getBitmapWidth (), a.getBitmapHeight ());

  setPositionChild (, bitmap1.getLeft () + bitmap1.getBitmapWidth (), 0);

  ...................................

  setExtent (w, h);

  Can you elaborate on what you see?  What does not work?  Is called the scaleImage32 method?  The field is not be added to the screen or is the image not adjusted as desired?  What values are the scale by?

  I recommend having a look at this post.

  http://supportforums.BlackBerry.com/Rim/Board/message?board.ID=java_dev&message.ID=41782&query.ID=18...

• BB10 Simulator on Mac hangs just at startup - Parallels 7

  The BB10 Simulator works on Parallels 7?

  I was able to get the things installed but when I run it it crashes. Any suggestions?

  Thank you

  

  This is not a tested configuration.  The Simulator can run in native mode in VMWare Player on Mac, so you should use Parallels.

• Requirement of the graphics card dedicated for BB10 simulator

  Hi, the blackvery website developer, I found the infromation that BB10 Simulator requires NVIDIA GeForce 8800 GT or higher to an ATI Radeon HD 2600 or higher graphic. This affects when even if the pc has the graphics card integrated rather than required. I mean I can run the Simulator very well, but this will affect anyway if I run an opengl project in the Simulator? Thank you.

  The BlackBerry 10 Dev Alpha Simulator uses OpenGL 2.0.  If your graphics card does not support it you can have problems (some only show a black screen).

  If you see a black screen you can try the software rendering mode (choose option 2 before boots simulator), but you could still see some rendering issues using this mode.  In addition, it is going to be slower.

• BB10 Simulator on Vmware ESXi

  I'm trying to get the BB10 Simulator to work on a VMWare ESXi server. Here's what I've done so far:

  1. Installed the Simulator on yhe development machine, started VMWare workstation, open the vmx file and downloaded the VM on the ESXi server.
  2. Disabled 3D acceleration on the machine virtual (on ESX) and selected 'Full touch safe mode' after starting the virtual machine.

  At this point, the virtual computer screen displays the IP 'telnet ftp ssh qconn', the axis of the device and the build number.

  The next step is to connect the Momentics IDE to this virtual machine.

  The Simulator is in need of a vmx file configuration dialog box (likely to run vmware specific commands). In the configuration of ESXi, there is no vmx file.

  If I try to connect to the virtual machine by IP address, I need a device password, I did not.

  Someone at - it suggestions on what do I do now?

  In response to my own question because I found the answer:

  Now that I have the IP address, I just follow the steps described in

  http://supportforums.BlackBerry.com/T5/native-development/BB10-native-Cascades-SDK-not-connecting-to...

  Because I had never set up a password for the Simulator, I left the empty password field.

  Copy-paste the details:

  Of your IDE

  -Right click on your project in the Project Explorer

  -Go to Blackberry tools and click on configure target...

  -Click Add new target it... button and enter the IP address of your Simulator in the host name or IP address field, enter your password if you have one then click on finish

  To run your application on the Simulator:

  -In the Project Explorer view, double click on file bar - descriptor.xml, then click on chip Debug Set button to set the author of the application information.

  -Set the configuration of the correct version for the Simulator first by right-clicking on your project and selecting Configurations of Build > Set Active > 4 Simulator-Debug.

  -In the Project Explorer view, right-click the project and select build project.

  -Right click on the project again, and then select run as > BlackBerry Application C/C++.

• BB10 Simulator speed is low

  Hi all

  I had a problem about the very slow speed of the BB10 Simulator. I installed VMware 5 and the BB10 simulator 10_0_09-1101. The hardware configuration of VMware to run the Simulator was the following: memory: 1.5 G, number of processor cores: 2. I run the software on my laptop HP pavilion dv5 (corei3 2.27 G, 3 G Ram, graphics intel HD).

  Is the configuration of my laptop, not enough to run the Simulator or I don't have some setting or configuration? I'm looking forward to your media.

  Thank you

  have you enabled virtualization in the bios of your computer?

• HTML Article assemble dynamically, do scroll is not possible after the orientation change

  Hi guys,.

  I encountered the following problem today:

  Im having an HTML page set dynamically from a source JSON file, manipulation of information in JSON with jQuery. I'm downloading the page HTML (html page is empty until the page is in the DPS stack, then it builds) as an HTML article with the ' Smooth Scrolling: vertical. So far so good.

  When I open the page inside the Adobe viewer app on my iPad, I can see the "first" part of the page (the first 1024px in portrait orientation), but I am not able to scroll further down the page.

  However, when I do a change in orientation of the device (turn it landscape and then come back), I can scroll perfectly well and am able to see everything on the page (so I'm quite sure that the json in jquery for html conversion work). still unknown, when I let the page tell me his height (via $("body").height () and $(document) .height ()), it shows me that the height of the page is in effect (for example) the 10.000px, but I am not able to scroll down until I do the orientation change.

  am I missing something? im sure that my code is correct, because once I change the direction of my camera, everything works perfect.

  
  

  I hope that my problem is understandable, any help is very appreciated.

  
  

  Thank you

  
  

  Max

  You have correctly identified the root cause: we ask the page height so we can tell the web control what content is the height. If there is JavaScript that runs when the page is loaded (or at any other time, honestly) which changes the height of the page, what could happen after that we ask for the height.

  It is, unfortunately, no way to send a signal to the app ask that we re - check the height of the page and update the web control accordingly. I think the reason why it works on rotation, we only are not destroy and recreate the web control, so the height of your page is calculated correctly, but we re - ask the height so we can draw the control.

  Neil

• BB10 Orientation change

  Hey everyone, I looked and found nothing of the sort that has been useful. Basically I'm migrating my Playbook to BB10 app, but I have problems with the direction of switching. On the playbook, I used stage.setOrientation (StageOrientation.DEFAULT); and stage.setOrientation (StageOrientation.ROTATED_RIGHT); and it has worked very well for the playbook, but on the BB10, this seems not to work at all. false this setting was the same for both devices.

  Thanks in andvance and happy holidays to all

  Although this solution solves some of the problems that's not really change the orientation. I have a call of qnx event for a toolbar at the top of the screen which should always be above the current value of orientation.

  I think I've solved my problem by using stage.setAspectRatio (StageAspectRatio.PORTRAIT);
  stage.setAspectRatio (StageAspectRatio.LANDSCAPE); with my current code.

• BB10 Simulator stuck on 'Get IP'

  After I updated my PC for Windows 10 my Simulator BB10 stopped to retrieve its IP address, I downgraded to W8.1 and it worked for a day or two, but he is now stuck with the message "Get IP" in the lower left corner of the Simulator.

  I have re-installed the Simulator and checked the connections of VMWare, it creates are enabled, but I had no luck.

  Someone has encountered this before and fixed it without reinstalling everything?

  Thank you

  Try to modify the Virtual Machine settings, changing the network card configuration.  According to what you already have, try bridged, host-only or NAT.  Change the network type usually resolves these types of network conflicts.

  Make sure also that you have the latest version of VMWare Player installed and do not of Microsoft Hyper-V installed (it is often in conflict with VMWare Player).

• PhoneGap / app example Cordova not launching by BB10 Simulator

  I am launching a Phonegap "Hello World" example app in the Simulator BB10.

  As much as I fear, everything has been done correctly. The icon sets even on the home screen, but when I run it I get a black screen with the BB 10 logo in the background and it just hangs.

  See photo:

  I changed the 'project.properties' file in the project by adding the IP address of the Simulator and pointing to the SDK software WebWorks BB 10.

  I do not add the password BB 10 Simulator, because as far as I am concerned it is not a.

  I followed all the directions on Apache Cordova heredocumentation.

  Any help would be appreciated!

  Thanks in advance!

  OK, the problem is that I didn't use the default setting for the installation of the SDK. You MUST use the parameter by default when you install the SDK software to:

  / Developer/SDK/Research In Motion/BlackBerry 10 WebWorks SDK 1.0.4.5

• Cannot deploy the bar file BB10 Simulator.

  As the title,

  I have try all the possible method to deploy my bar of file Simulator BB10 running on VMware player without a bit of luck.

  The IP address that I use is the one indicated in the developer section of the simulated device:
  169.254.0.1

  no luck, I can't even ping the device to the windows console.

  Any idea?

  If you are connected to a VPN, it can cause connection problems to the Simulator.

  Could you try reboot the Simulator in bridged mode?  You can change this under the network option in the settings of your virtual machine.  If you do not have to go through NAT, which could cause you problems, this will put the Simulator on your physical network card.

  Also are you able to telnet/ftp to the Simulator?  You can identify yourself as devuser/devuser.

• iPad, screen Orientation change without moving the iPad? An application perhaps? Is this possible?

  I would like to have the ability to change the orientation of the screen without physically rotate the iPad vertically.

  Here's what I mean.

  I have the iPad on the desktop and I want to check the email in landscape mode, I move on the table horizontally to landscape mode and orientation should change. It is not for the moment. I have to raise the iPad on the table and to change the direction from Portrait to landscape and when I go back to an application demanding in portrait mode, I have to again raise the iPad on the table.

  I was wondering if there is a utility app that allows the switch without raising the iPad and turning to change direction.

  Hello amitkapila2,

  Yes a few apps will change your orientation when you start them. Try roating your iPad in landscape ounces landscape enable locking focus on the home screen (in the last control center) and then launch the application of it rotates so it's the app.

• Windows screen orientation changed from horizontal to vertical

  Someone already had the modification of the provision for the Office of the horizontal to vertical.  My baby accidentally got on the computer and somehow changed the orientation of the screen.  Can someone help to solve.

  If you set the computer on its screen-side up it seems ok, but of course, you cannot type on the keyboard.

  That can be hard on the neck. :)

  Press Ctrl & Alt keys, and use the arrow buttons to turn it back.

  Alternative: right-click on the desktop | Screen resolution | Orientation.

• BB10 Simulator - how to stop?

  How can I stop the Simulator? I tried a little bit about all the keys on my keyboard, and none of them does not seem to do something special. I'm assuming that actual devices have a power on / off button, or * some * way of turning the device off, then how could I do on the Simulator?

  Please note: the 'power off' option in the VMware Player/workstation is NOT the way to do it. It would be the same as 'pulling the plug' or ' withdrawal you battery while the device is still on ", which is extremely bad.

  I must be missing something.

  You can use the controller bb10 program (installed in the same location as the Simulator) that simulates the hardware buttons (among others) on the device.

  While a power-reset to zero through vmware is more convenient and does not side effects cause unwanted imho