BBM process ends My App

Similar Questions

• process ended unexpectedly

  try to install windows SP3 for XP Home, tried to install via windows update and installation by the network, the installation gets near the end where is starts updating the registry, she leaves installation gets this error message every time the process ended unexpectedly then it goes through the restore process canceling changes

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you tried to install SP3?

  A Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?

  How to troubleshoot a failed installation of WinXP SP3
  http://support.Microsoft.com/kb/950718

  WinXP SP3 - read all the prerequisites for a successful installation
  http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx

  Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009.  This support will cost you 59 US$ per incident now.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Update problem. "Windows didn't start the Windows Update service on Local computer." Error 1067: the process ended unexpectedly. »

  I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.

  Log name: Application

  Source: Application error

  Date: 21/07/2012 10:40:20

  Event ID: 1005

  Task category: (100)

  Level: error

  Keywords: Classic

  Description:

  Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing.  Windows has closed the program host process for Windows Services because of this error.

  Program: For the Windows service host process

  File: C:\Windows\System32\wuaueng.dll

  Tried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.

   

  SOLVED!

  Hello

  Follow these methods.

  Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll

  To save the c:\windows\system32\wuaueng.dll file, follow these steps:

  a. click Start, type run.

  b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.

  c. When you receive the following message appears, click OK:

  DllRegisterServer in successful c:\windows\system32\wuaueng.dll.

   

   Method 2: If this does not help, you can reset Windows update components and check.
  How to reset the Windows Update components?
  http://support.Microsoft.com/kb/971058
  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

• Error - c000021a {fatal system error} the Windows logon system process ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000), not able to start the computer.

  Original title: computer will not open a session.

  c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).

  Hi macduf123,

  You did it all change hardware or software on your machine before this problem?

  The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.

  You can follow this link and check if you are able to start correctly on the desktop.

  How to solve an error "STOP 0xC000021A.

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Without end error App 606 torch reset problem

  Hello

  I am developing an app for the devices RIM supporting the OS version 4.5 and 4.6 +.  In my 4.6 + branch, I ran into a huge problem with this binary file on the torch on the last two official versions of the OS (6.0.0.246 and 6.0.0.449; Versions of Rogers).  Code is built using JDE 4.6, signed using the private key of my company and the RIM SDK buttons.

  If my request is properly installed (loading cable using javaloader - no previous version installed) and as long as it normally stops before the reset, I encounter problems.  If I installed a previous version using javaloader, or I pull the battery when the application is running, the machine can finish is no longer the boot process.  The torch passes through the full operating system loading process, and everything as network connections begin to come to the top and before the coming carrier screen, I get an alert saying "Eception exception: NullPointerException", another alert saying "Eception exception: java.lang.Error" and then a white screen saying "App Error 606" and a line below to say "Reset".  After reset of the device this ever again, no matter how many times I reset.  The device is actually brick until you force remove my application using javaloader, after which, the unit returns to the normal operating state.

  This problem does not occur if the application has not been used (I can install over it as much as I like, as long its persistent store has not been created).  This leads me to believe that there is a bug in the implementation of permanent storage in these OS versions.

  Attach the debugger through the startup process gives a large number of unknown uncaught exceptions during the final stage of startup (several hundreds).  The most interesting part of the log, contains the following debug messages, probably from the implementation of the Application Manager.  This is repeated several times, indicating that the AM cannot go beyond initialization after several attempts to start and dies by timeout in an unrecoverable state:

  AM: Started net_rim_bb_browser_daemon(300)
  AM: Exit net_rim_bb_browser_daemon(300)
  AM: NullPointerException
  AM: No detail message
  AM: net_rim_bb_browser_lib-3(4D389E92)
  AM:  BrowserDaemonRegistry
  AM:  
  AM:  0x226F
  AM: net_rim_bb_browser_lib-3(4D389E92)
  AM:  BrowserDaemonRegistry
  AM:  setInstance
  AM:  0x2453
  AM: net_rim_bb_browser_lib-3(4D389E92)
  AM:  BrowserImpl
  AM:  
  AM:  0x4650
  AM: net_rim_bb_browser_daemon(4D389EA8)
  AM:  BrowserLoader
  AM:  main
  AM:  0x81
  ApplicationManagerImpl.processExited : process process switching to background:  pid=300
  

  I'd be more than happy to send a replication mechanism binary and full of a person on BOARD to help solve this problem.

  I solved the problem and I thought that others here could benefit from my experience with this.

  In the code of my Persistent Store app, I was stretching from ContentProtectedVector and ContentProtectedHashtable and marking these as Persistable classes so that they could make in the persistent store.  For example:

  public class Attributes extends ContentProtectedHashtable implements Persistable
  

  Neither the compiler nor the JVM complained when these classes have been committed in the persistent database, and they behaved properly on simulators and devices with OS versions 4.5 - 5.0, without any problem.  Versions 6.x BBOS will accept this code as well, but on a cold (battery pull) start, I got the following error in the log (id and package name changed to anonymize my organization signatory):

  CMM: net_rim_cldc-11(5967) no sig from 0xFFFFFFFF
  module 5967 cannot reference com.xxxxxxx.client.model.Attributes
  

  While the API seems to confirm this, something in the cldc seeks to inspect the store persistent on cold start, and it seems to fail when it encounters an object that is a subclass of a Persistable class pre-existing and Persistable.  If this behavior is that it should be in the documentation Persistable and all classes of the RIM that implement Persistable.

  Since the current Persistable JavaDocs:

  A class must explicitly implement this interface for the system store instances of the persistent class. Subclasses inherit any implementation of this interface. In the following example, Bar instances may persist, because the class does not explicitly implement the Persistable interface (if you try to store an object of bar in the persistent store, the camera fires a JVM error):

  This seems to imply that extend a Persistable class and Persistable implementation is the path provided (for example, if you do not want to stock the bar from the example of the JavaDoc).

• How to handle the case end good app?

  Hello

  I'm creating an application for BB Storm2 5.0 device. I have a function to maintain a custom in app menu item native contacts, and clicking from there, brings to my screen of the application. It works very well.

  Problem occurs in the following steps:

  Steps to follow:

  1. start my native element menu contacts application, launch my app successfully screen.

  2. then if I press the red button, launching the device home screen.

  3 then run on the native Contacts application once again, throw my request directly instead of native contacts.

  Because in step 1, I launched my application screen in the menu contacts native. Because it does not have closed earlier, lance on native contacts spear my request.

  Anyone explain how can I handle this situation?

  Thank you.

  What amrishodiq said, this isn't 100% correct.  Let me correct that, then explain what you see:

  You can add the ApplicationMenuItems without even starting your Application, by doing this in the treatment of hand (.).  If your application is present or not is irrelevant.  In fact, if you add them to the start of your application, you can get several added entries, must be careful about this.

  What amrishodiq said about the red button and the usual methods of closing an Application is correct.  If you really want to exit your Application, is to call System.exit (.).  This happens automatically if you use the screen and you close the last screen in the stack to display.

  That said, you're doing something completely different here.

  You run in a Menu of Application element.  This menu item runs your code, but it is actually run by the Contact Application.  That's why, when press the red button and then relaunch the application contact, you view your screen.  If you had an icon for your Application and you have clicked on that right now, you will see a different screen.

  In this case, if your screen called System.exit (.), he was closing the Contacts Application.

  The problem of the listeners and ApplicationMenuItems running in the Application they are related is something that comes up quite often on this forum.  You really need move on to your own application and process the contact in there.  There are complications with it, make it seem easier to do what you're doing, that is just run your screens under enforcement Contacts.  However, I would recommend that you look at putting in a global events in the context of switch for your application, I think it's a better long-term solution.

• error 603 - startup process of service app is dead

  Hello

  Has anyone seen this?

  My app works for awhile (2 seconds for an hour or two) then crashes the whole device.

  I get an error "app 603."

  Shows debug output:

  Net_rim_services_impl (8) the application does not. process is completed

  [d03 d]

  D03 d

  ...

  Error App 603

  Service startup process is dead

  Pointers much appreciated.

  Thank you

  Dave

  you block the thread of the event, most likely by the networking or blocking any other treatment without using a separate thread.

• Restart the process from another App Engine user

  I am a DBA and I want to restart and engine of the user process final app whose execution is unsuccessful. I have the process scheduler administrator and PeopleSoft administrator roles, however I still cannot restart AE.

  What other guarantees is needed for this?

  Based on your response, I'll assume that you also have some knowledge of the application (which may not be not DBA).  Since you ask, I'll also assume that the reboot option button is not available in the process monitor.

  You should not have other roles.

  What happens if you try to restart it from the command line?

• 6.18 Skype starts, the process ends directly after startup

  Running Windows 7 family SP1, X 64, the latest version of Skype.

  Whenever I run Skype, the output connected icon in the taskbar, but it disappears as soon as I have the mouse over it. Looking at the Task Manager, Skype starts and ends and then right away.

  Event Viewer / custom views / administrative events has the following entries, which may or may not be connected: http://pastebin.com/j2VDpAbF

  I already tried things:

  • Uninstalling and reinstalling
  
  
  • Uninstall, remove the folder appdata (roaming and Local), remove entries from registry of Skype and re - install.
  
  
  • Running Disk Cleanup Skype running as administrator.
  
  
  • Running Microsoft Fixit ProgramInstallUninstall to uninstall before installing again.

  I can't find older versions, I think because Microsoft wants to encourage the use of more secure versions / patched, so I can't say if this question is directly related to the most recent version, or something on my computer.

  If anyone has any suggestions for what to try next, I would be really grateful.

  scutterman wrote:
  

  Here are the DXDiag information, as requested.

  Uninstall IP camera [JPEG/MJPEG]. This virtual device video capture is known to cause problems with Skype.

• Stop: c000021a {fatal error} the windows logon system process ended unexpectedly with the status of 0xc0000034 (0x00000000) (0x00000000) need help please system does not start

  Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?

  You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.

  When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.

  There should be a copy of winlogon.exe here:

  c:\Windows\System32\dllcache

  Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache.  If you do not see here, search your HARD drive and find one.  Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...

  You just need to replace the file winlogon.exe somehow.

  When you are finished replacing, restart as usual (remove the CD bootable of course).

  With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.

  Do you have a Hiren BootCD you can download here:

  http://www.hirensbootcd.NET/

  On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see.  It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):

  Direct HTTP mirror + Torrent, Torrent Magnet

  Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.

  The ZIP file is large, so the download will take probably some time to complete.  Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.

  Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD.  You must use software that includes how to burn a. ISO to a CD to create a bootable CD.

  File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it.  The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner.  You can also use your own burning software as long as your software is able to create a bootable CD. ISO file.  More modern burning programs can create a bootable CD. ISO image.  Create a CD from an ISO image bootable is not the same as just the file on a CD burning.

  If you need a simple and CD burning, this is a free software popular software:

  http://www.ImgBurn.com/

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your new bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.

  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When starting on the Hiren's CD, you will see a menu of options.  Choose Mini XP.  It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.

  Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.

  There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• Launcher service DCOM server process ended in unexpectedly or Plug and Play service ended unexpectedly

  I get the same exact error messages, they began yesterday and my laptop is close and restart on every 20 minutes with error message appearing before having disconnected. I've tried everything that microsoft offer and still the error message appears, one got a help or advise, help please its makes me the walls of the

  Hi Williams,

  Are a. When you facing this problem?

  B. recent changes made on the computer?

  Let us try the following methods.

  Method 1

  Do a virus scan online on your computer. You can do a scan of PC security by clicking on the link http://onecare.live.com/site/en-us/default.htm and clicking on the analysis of a complete Service and accept the contract of

  Method 2

  Perform a system restore. http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  Method 3

  Try to check if the DCOM Server process Launcher service is running on the computer.

  You must be logged on as administrator to perform these steps.

  1. open administrative tools by clicking the Start button, then Control Panel. In the search box, type administrative tools, and then click Administrative Tools.
  2. double-click on Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  3 right-click the DCOM Server process Launcher service and then click Properties.
  4. on the general tab, next to startup type, make sure that automatic is selected.
  5. If the service is not already running, under Service status, click Start and then click OK. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  If fails it step above, I suggest you check the event viewer to determine the cause and after return with accuracy of event viewer.

  1 open Event Viewer by clicking the Startbutton, click Control Panel, clicking system and Maintenance, clicking Administrative Tools, and then double-click eventViewer . If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. click on the event log in the left pane.
  3. double-click on an event to view the details of the event.

  What are the information in event logs? (Event Viewer)
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer
  Reference:
  http://social.answers.Microsoft.com/forums/en-us/vistahardware/thread/aa3373fa-836D-43f2-BCFC-6e566553c818

  Bindu S - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think

• process of the App "on the new instance" exact point of execution

  Hello, I have an application process that aims to define a bunch of elements of the application at the start of the session.

  II developing used authentication 'door open' and everything worked as expected.

  As I went to LDAP, it seems that the process is called even from the login page (101),

  even if it is meaningless at this stage since no user identity is established.

  Open door seems to ignore the page 101 with its own simplified login (user name) dialog box.

  where my approach is not called (but it is called a little later because the parameters are resolved

  at the time when the application needs make his first login page after).

  What is the recommended method for the initialization to happen only once.

  but only after authentication successful?

  Application of processes & calculations occur before a user is authenticated.

  Try this: set up a simple application with two elements of the Application.  Set a single item on new Instance in him: APP_USER and others before heading to: APP_USER.  Then, on Page 1 of your application, print these two points.  You should see that the point on the new Instance is set to nobody (that is, the user has not yet been authenticated) and the header before one is defined for the user that you just connected to.

  It's a bit counterintuitive, as you mentioned, but this is workaround that I've used for a while and I had no problem with it.

  Thank you

  -Scott-

  http://spendolini.blogspot.com

  http://www.enkitec.com

• the wrapper of the application must end with. app... folio is not valid

  Hey there, when I restart th Prep via itunes connect after only 40 seconds, I get this message below. I have updated software etc checked folio and exported and still no joy.

  Thank you, Neil.

  I have been export the application from the producer of folio and using this .zip file that has been exported from the folio Builder.

  Solution was to create the APP again, once created, then download the .zip file that has been created in the constructor of DPS APP.   Distribution app... highlighted in blue)

• The application wrapper must end in .app - Error Message

  When you use the Application Loader, I received the following error message:

  The wrapper of the application should in. app. /var/folders/J4/dxcyk0g90277p3cw5g9mq8640000/T/Stellapop_Digital_Brochures.zip/BrandingBr ochure.folio is not valid

  Any ideas how to solve this problem? Help, please!

  If you are a business customer we have a similar guide that explains step by step how to submit your application: http://help.adobe.com/en_US/ppcompdoc/Adobe_Publishing_Companion_Guide_for_iPad.pdf.

  From what you wrote above it looks like you are trying to create a simple editing application, even if you are a professional Subscriber. Single edition apps are iPad only. They don't support any iPhone. If your customer wants to take over the iPhone, the only option is to create a multi-question application and argue that, in the store, then publish questions to aid Folio Producer.

  Neil

• Waiting for a function/process ends.

  I wrote the code for a simple gallery where you click on a button and it loads an image into a UILoader component.

  Problem is I want to add fading to it without any problems.

  I want it to fade out. load the image in UILoader componet, then at the end fade in. I use a dynamic interpolation for this. I also melted back when an image occupies the UILoader, then load a new image.

  PROBLEM is that I have a separate function that creates a dynamic Tween to fade. When he fainted, I want to load new images and then melted using the fade function that creates a Tween.

  How would I get to fix this problem?

  Also, I want my next button should be disabled while it is to load the images, so the person is not a hammer on the button constantly and Pepin to discoloration and break it.

  Here's an example of how I'd do:

  import fl.transitions.Tween;
  import fl.transitions.easing.None;
  
  var path:String="l4d_published";
  var currentPage:uint;
  var insArray:Array=[tn1,tn2,tn3,tn4,tn5,tn6,tn7,tn8,tn9,tn10,tn11,tn12,tn13,tn14,tn15];
  var imgArray:Array;
  var tweenArray:Array=[];
  
  for (var i:uint = 0, len:uint = insArray.length; i < len; i++) {
      insArray[i].visible=false;
      insArray[i].addEventListener(Event.COMPLETE, imageLoadComplete);
  }
  
  pagefwd.visible=pagebwd.visible=false;
  
  pagefwd.addEventListener(MouseEvent.CLICK, fwdClick);
  pagebwd.addEventListener(MouseEvent.CLICK, bwdClick);
  
  function fwdClick(e:MouseEvent):void {
      setPage(++currentPage);
  }
  
  function bwdClick(e:MouseEvent):void {
      setPage(--currentPage);
  }
  
  var myTextLoader:URLLoader = new URLLoader();
  myTextLoader.dataFormat=URLLoaderDataFormat.VARIABLES;
  myTextLoader.addEventListener(Event.COMPLETE, textLoadComplete);
  myTextLoader.load(new URLRequest("l4d.txt"));
  
  function textLoadComplete(e:Event):void {
      imgArray=e.target.data.images.split(".jpg,");
      setPage(1);
  }
  
  function setPage(page:uint):void {
      currentPage=page;
  
      pagebwd.visible=(currentPage!=1);
      pagefwd.visible = (currentPage=imgArray.length-1) {
              insArray[i].visible=false;
          } else {
              insArray[i].visible=true;
              insArray[i].alpha=0;
              insArray[i].source=path+"/"+imgArray[imgID]+"_tn.jpg";
          }
      }
  }
  
  function imageLoadComplete(e:Event):void {
      tweenArray.push(new Tween(e.currentTarget,"alpha",None.easeOut,0,1,1,true));
  }