process ended unexpectedly
try to install windows SP3 for XP Home, tried to install via windows update and installation by the network, the installation gets near the end where is starts updating the registry, she leaves installation gets this error message every time the process ended unexpectedly then it goes through the restore process canceling changes
What application or antivirus security suite is installed and your current subscription? What anti-spyware (other than Defender) applications? What third-party firewall (if applicable)? Who were these applications that run in the background when you tried to install SP3?
A Norton or McAfee application has already been installed on the computer (for example, a free trial version which is preinstalled when you bought it)?
How to troubleshoot a failed installation of WinXP SP3
http://support.Microsoft.com/kb/950718
WinXP SP3 - read all the prerequisites for a successful installation
http://msmvps.com/blogs/harrywaldron/archive/2008/05/08/Windows-XP-SP3-read-all-prerequisites-for-a-successful-installation.aspx
Free installation and unlimited compatibility support for WinXP SP3 is available since April 14, 2008 to May 2009. This support will cost you 59 US$ per incident now.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
Tags: Windows
Similar Questions
-
I have a problem with windows update. When I try to start the windows update service, I get this, "Windows could not start the Windows Update service on Local computer. Error 1067: The process ended unexpectedly. I also see this in the event viewer.
Log name: ApplicationSource: Application errorDate: 21/07/2012 10:40:20Event ID: 1005Task category: (100)Level: errorKeywords: ClassicDescription:Windows cannot access the C:\Windows\System32\wuaueng.dll file for one of the following reasons: there is a problem with the network connection, the file is stored on the disc or the storage drivers installed on this computer. or the drive is missing. Windows has closed the program host process for Windows Services because of this error.Program: For the Windows service host processFile: C:\Windows\System32\wuaueng.dllTried regsvr32 c:\windows\system32\wuaueng.dll and got "the"C:\windows\system32\wuaueng.dll"module has been loaded but the call to DllRegisterServer failed with error code 0x80004005.SOLVED!Hello
Follow these methods.
Method 1: Try to re - register the file c:\windows\system32\wuaueng.dll
To save the c:\windows\system32\wuaueng.dll file, follow these steps:
a. click Start, type run.
b. now, tin the window run, type regsvr32 c:\windows\system32\wuaueng.dll and then click OK.
c. When you receive the following message appears, click OK:
DllRegisterServer in successful c:\windows\system32\wuaueng.dll.
Method 2: If this does not help, you can reset Windows update components and check.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058
Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article:http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry
-
Original title: computer will not open a session.
c000021a {fatal system error} the windows logon process prosses systewm ended unexpectedly with status 0f 0 x 0000034 (0x00000000 0x00000000).
Hi macduf123,
You did it all change hardware or software on your machine before this problem?
The STOP 0xC000021A error occurs when Winlogon.exe or Csrss.exe.
You can follow this link and check if you are able to start correctly on the desktop.
How to solve an error "STOP 0xC000021A.
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Hi my HP Compact computer running with windows Xp professional recently had security tool, antimelware doctor and I kind of have got rid of him, he also put some viruses on the winlog thing and I could not get rid of it with antivirus software that I don't know the name of, Malwarebytes' Anti-Malware and AVG 2011 I did a scan antivirus in safe mode with AVG(in command prompt mode) and he put a bunch of virus the virus volt, I'm out there and there was a running called 2008 command prompt and I clicked on output and it says that this program is not complete (or something similar) save all unfinished work before going out and me did not run this command prompt , so I left Malwarebytes' Anti-Malware and avg, then I restart my computer and we get the blue screen of death say stop: c000021a {fatal error} unexpectedly finished process windows logon process system with the status of 0xc0000034 (0x00000000) (0x00000000) system will reboot, and whenever it restarts, it says the same thing, I can't use safe mode cause it resets and starts normally any help pls I have files I need this computer?
You can create a bootable XP Recovery CD of Console and replace the file, but it may be easier for you to make boot CD of a Hren.
When you start the Hiren's CD, choose the XP Mode of Mini and it has an interface in XP style Explorer where you can find and replace the winlogon.exe suspicious or missing file.
There should be a copy of winlogon.exe here:
c:\Windows\System32\dllcache
Rename your current c:\windows\system32\winlogon.exe file (if it exists) and copy / paste the replacement of c:\windows\system32\dllcache. If you do not see here, search your HARD drive and find one. Another possibility (depending on your environment) is c:\windows\ServicePackFiles\i386, or c:\i386 d:\i386...
You just need to replace the file winlogon.exe somehow.
When you are finished replacing, restart as usual (remove the CD bootable of course).
With the help of Hiren, you can also copy offshore on an external device (USB key or HARD drive), all personal security files.
Do you have a Hiren BootCD you can download here:
On the left, click on download, scroll down, choose the latest version, the download link is a little hard to see. It is at the bottom of the page, above the drop for older versions and looks like this (click this component to download the ZIP file):
Direct HTTP mirror + Torrent, Torrent Magnet
Click the "Live HTTP Mirror" link to start the download and save the ZIP file on your desktop of somewhere that you can remember.
The ZIP file is large, so the download will take probably some time to complete. Then unzip the download to extract the Hirens.BootCD.ISO file that will be used to create your new bootable CD.
Create a bootable CD. ISO file is not the same as simply copying the. File ISO onto a blank CD. You must use software that includes how to burn a. ISO to a CD to create a bootable CD.
File ZIP the Hiren is the file BurnToCD.cmd that you can double-click to launch it. The BurnToCD.cmd will use the file BurnCDCC.exe to burn the. ISO file onto a blank CD using your existing CD burner. You can also use your own burning software as long as your software is able to create a bootable CD. ISO file. More modern burning programs can create a bootable CD. ISO image. Create a CD from an ISO image bootable is not the same as just the file on a CD burning.
If you need a simple and CD burning, this is a free software popular software:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your new bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.
These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When starting on the Hiren's CD, you will see a menu of options. Choose Mini XP. It will appear while Windows is loading and you will be presented with a desktop computer that has the look and feel of the interface of Windows Explorer, you are already accustomed to using.
Using the Mini XP, you can access Internet, maneuvering around your system, search for files, copy files, replace the files and run the scans for malware, edit the text files (like the c:\boot.ini) etc.
There are dozens of free and useful tools included in the CD that can be used to repair your system or copy your important personal files on another device (like a USB device or an external drive) in the case where you just give up and decide to reinstall your XP (I hope that you will not make this decision).
Do, or do not. There is no test.
I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
Windows does not start, press the system restore, but it happens with stop: c000021a {fatal system error} the session manager failed to create protected prefixes of the completed system unexpectedly with the status of 0xc000003a (0x00000000 0x00000000) the system stopped
Hello
· Are you able to boot into office?
· Remember to make changes to the system?
I suggest you to remove the external devices (such as a printer, scanner, etc.) on the system and check
Method 1:
I suggest to start in safe mode and check.
a. restart the system and keep tapping F8 until you reach the start menu.
b. Select safe mode from the list and press ENTER.
Method 2:
I suggest you begin the last known good configuration and check.
a. restart the system and keep tapping F8 until you reach the start menu.
b. Select last good known in the list and press ENTER.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think. -
My husband must have some kind of bug in his computer as Kaspersky Internet Security, when he went on the internet, gave him a choice to block something that was causing a problem. When he clicked "Block" - he got the BLUE SCREEN! Is anyway for him to cancel it and save all her pictures on his computer?
It has a Dell Dimension 8400 computer about six years.
----
Sorry to bother you, but this time we did shut down his computer and restarted everything was fine. Apparently he had clicked on something like 'do not allow' or however its formulation that I do not see. So now we have to probably save photos and things out of his computer and take out the drive to reinstall Windows XP because there still be some sort of bug in there because we are getting popups saying some program are eager to enter the passwords section. I don't know much about it but try to fix it!I looked into Kaspersky and ran a browser Configuration and analysis of the vulnerability in his computer and found that there was a kind of 'control popup' in Internet Explorer that had been added in the settings of the pop-up window. -I deleted who.
I saw a setting in Kaspersky has been changed by default (they say "changed by the user, but did not change). -I have put all Kaspersky setting at default.
So now, we hope the computer that my husband will work very well in the future because it's good now, even after rebooting.
Now, we will have VERY serious about all of his photos on his backup external hard drive!
If we have more problems with that, I'll be back but for now, everything is GOOD!
-
I HAD UPDATED MY WINDOWS SP2 TO SP3 HOME EDITION AFTER A FEW WEEKS OF WORK I GTO MESSAGE AT STARTUP AS NTOSKRNL. EXE IS CORRUPT OR MISSSING ON THE USE OF THE REAL CD BUT NOW I FIXED THE WINDOW STARTS BUT NO NEWSPAPER ON AUTOCHECK DISABLED SCREEN AND THE BLUE SCREEN WITH ABOVE CODES IS THE FINAL RESULT
SNS.cool,
Thanks for posting on the Microsoft answers Forum. Take a look at the article below. It includes information about the problem you are having.http://support.Microsoft.com/kb/156669
Post back with the results.
Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
I am trying to start my Dell Inspiron 1525, but get the following blue screen message "STOP: c000021a {fatal system error} the initial session of the process or system process ended unexpectedly with status 0 x 000000001 (0xc0000034 0x0010038c).» The system was stopped.
I tried to boot mode without fail & startup repair but nothing helps, always the message, any help would be really appreciated as all my College work is stored on the laptop.What about OttoWindows vista Home basicHello
Check with Dell Support, their online documentation, diagnosis and ask in the forums about known issues.
Dell support
http://support.Dell.com/Dell support drivers - product manual & warranty Info (left side) - and much more
http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHSDell forums
http://en.community.Dell.com/forums/=========
STOP: 0XC000021A
Can be a difficult problem to solve, and you indeed need a technical help in a real store of the computer
(not the leeks and the glances at a BestBuy or other BigBox stores) or system manufacturer support.Cause
This error occurs when a subsystem of mode user, such as WinLogon or the Client Server Run-Time Subsystem (CSRSS), irremediably compromised and security can not be guaranteed. In response, the operating system goes into kernel mode. Microsoft Windows cannot run without WinLogon or CSRSS. Therefore, it is one of the rare cases where the failure of a user mode service can stop the system.
Incompatible system files can also cause this error. This can happen if you restored your hard disk from a backup. Some backup programs may skip restoring system files which they determine are in use.
Solve the problemRun the kernel debugger is not useful in this situation because the error occurred in a user mode process.
Resolve an error in the user-mode device driver or system, third-party application service: Because the bug 0xC000021A control occurs in a user mode process, the most common culprits are third-party applications. If the error occurred after the installation of the new or updated device driver or service system, third-party applications, the new software should be removed or disabled. Contact the manufacturer of the software on a possible update.
If the error occurs during the system startup, restart your computer, and then press F8 to character-based menu that displays the choice of operating system. In the Windows Advanced Options menu that results, select the last known good Configuration option. This option is most effective when a pilot or a service is added at a time. If the error is not resolved, try to manually remove the offending software. If the system partition is formatted with the (FAT) file allocation table, use a MS-DOS boot disk to access the hard disk of the computer. If the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or remove the defective software. If the defective software is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file. If a room newly installed if material is suspected, remove it to see if that fixes the problem.
Try running the emergency recovery disk (ERD) and allow the system to repair any errors that it detects.
Solve a problem of file system do not match: If you have recently restored your hard disk from a backup, check if there is an updated version of the backup/restore program available from the manufacturer. Make sure that the latest Windows Service Pack is installed.
STOP: 0XC000021A<-- read="" this="">-->
* 1314.html http://www.faultwire.com/solutions-fatal_error/Status-System-Process-terminated-0xC000021A------------------------------------------------------------------------
Look in the Event Viewer to see if something is reported on those.
http://www.computerperformance.co.UK/Vista/vista_event_viewer.htmMyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
http://www.NirSoft.NET/utils/my_event_viewer.html-------------------------------------------------------------------------
It's my generic bluescreen convenience store - you can try Mode safe mode as suggested in article
above - repeatedly press F8 that you start. Disks of Vista are probably necessary - if you do not have to try
repair, you can borrow a friends because they are not protected against copying. You can also buy the physical
discs of the machine system good cheap that you already own windows (you will need to reinstall
If necessary). You can also repair disks on another computer.Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
info that would help. Such as ITC and 4 others entered at the bottom left. And all others
error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.As examples:
BCCode: 116
BCP1: 87BC9510
BCP2: 8C013D80
BCP3: 00000000
BCP4: 00000002or in this format:
Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000It is an excellent tool for displaying the blue screen error information
BlueScreenView scans all your minidump files created during "blue screen of death," collisions
Displays information on all the "crash" of a table - free
http://www.NirSoft.NET/utils/blue_screen_view.htmlBlueScreens many are caused by old or damaged, in particular the video drivers drivers however
There are other causes.You can do mode if necessary safe or the Vista DVD command prompt or
Options recovery if your system is installed by the manufacturer.How to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlYou can try a system restore to a point before the problem started when one exists.
How to do a system restore in Windows 7
http://www.SevenForums.com/tutorials/700-system-restore.html-------------------------------------------------------------------------
Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN
Enter this at the command prompt - sfc/scannow
How to fix the system files of Windows 7 with the System File Checker
http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.htmlHow to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates cbs.log Windows Vista (and Windows 7)
http://support.Microsoft.com/kb/928228The log can give you the answer if there is a corrupted driver. (Says not all possible
driver problems).Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
How to run the check disk at startup in Windows 7
http://www.SevenForums.com/tutorials/433-disk-check.html-------------------------------------------------------------------------
Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
keyboard and mouse, as well as of other major device drivers.Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htmInstallation and update of drivers under Windows 7 (updated drivers manually using the methods above
It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.htmlHow to disable automatic driver Installation in Windows Vista - drivers
http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx-------------------------------------------------------------------------
How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
quit unexpectedly
http://support.Microsoft.com/kb/958233Troubleshooting Vista Blue Screen, error of JUDGMENT (and Windows 7)
http://www.chicagotech.NET/Vista/vistabluescreen.htmUnderstanding and decoding BSOD (blue screen of death) Messages
http://www.Taranfx.com/blog/?p=692Windows - troubleshooting blue screen errors
http://KB.wisc.edu/page.php?id=7033-------------------------------------------------------------------------
In some cases, it may be necessary.
Startup Options recovery or Windows 7 disk repair
How to run a startup repair in Windows 7
http://www.SevenForums.com/tutorials/681-startup-repair.htmlHow to start on the System Recovery Options in Windows 7
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlHow to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
as indicated above in the title...
That is what the message really says or does really say something like this:
STOP: c000021a {fatal system error}
The Windows logon process ended unexpectedly with status 0xc0000135 (0x00000000 0x00000000).
The system has been shut down.You will tell us something about your system?
-
c:000021 has unrecoverable system error. The system process window logon ended unexpectedly with a blocking ststus 0x00000000. The system has been shut down
Pls teach the procedure for resolution of the problems of this error message.
Hi mac62sg,
Remember to make changes to the computer before this problem?
You can follow the steps mentioned in the article below
How to solve an error "STOP 0xC000021A.
http://support.Microsoft.com/kb/156669
Important : this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
What can I do to solve this problem my laptop computer unecpectedly turns off after 4-5 minutes of operation, telling me: "Windows must now restart because DCOM Server Process Launcher Service ended unexpectedly.
What happens whenever I turn on the computer.
Advice me please.Hello 77Kuty78,
Allows you to ensure that your system is indeed clean, see below:
Try to start your system in safe mode:
- Restart your computer if it is running.
- Press and hold the F8 key for 3 seconds after your computer powers initially on.
- Once you see the Advanced Boot Options menu (or beep) you can stop.
- Up/down arrow keys to highlight your selection.
- Select Mode safe mode with networking and press ENTER.
- You should see drivers loading, it may take a few moments.
- You should then be at the Welcome screen.
- Connect to your computer using an account with administrator privileges.
- Now, you download (free) MalwareBytes from here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html?tag=mncol install, Update then do a scan of your system in safe mode, to ensure that it is indeed clean! Once the scan done remove anything it finds. Simply restart your PC to see if your problem has been resolved!
Hope this helps you. Let us know anyway. Make it a great day!
"And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)
-
Original title: c:\WINDOWS\system32\services.exe
I get: the system process c:\windows\system32\services.exe ended unexpectedly with the code of State-1073740972. The system shutdown will be present and reboot. It's driving me crazy! Help! PLEEEASE
Hello
Were there any changes (hardware or software) to the computer before the show?
Put the computer to boot and see if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: follow step 4 to reset the computer to start as usual after the boot process.
How to configure Windows XP to start in a "clean boot" State
Hope this information helps.
-
vCenter 5.5: Web services management service could be started or ended unexpectedly
Hello
in our vcenter costs installed 5.5 (on Windows 2012r2), we are not able to start VMware VirtualCenter Management Web services, we have a lot of messages in the system log:
"The service of VMware VirtualCenter Management Webservices ended unexpectedly. He did this 874 times. The following corrective action will be taken in 60000 milliseconds: restart the service. »
We only found KB articles for vcenter 4.x or 5.1, many said look if any other process is using port 8080, we checked it... no other process using this port
Any suggestions?
OK, found the problem: it isn't Port 8080, it is the port 8009 that causes the problem. We had installed qlogic HBA Software (QConvergeConsole), which has installed its own tomcat server. It blocks the port 8009.
found in wrapper.log
-
Photosmart C4180: inkjet has ended unexpectedly and failure to communicate
Printer has worked well in the past - HP Photosmart C4180 and Imac which has been restarted and the latest OS... Then started to receive two messages ' inkjet ended unexpectedly "which has been applied by a queue in the control panel of the printer that there was a communication failure. Try again, same thing happens
Whenever I try to print now either completely blocks and I try again, or it prints the first three lines, springs from the page, and then treat send individual sheets with a few lines of gobblegook - until what I finished printing.
This went on and turned off, very very annoying, sometimes it works after a few attempts, then not. Got it to work for a few weeks, now back with a VENGEANCE > have uninstalled, restarted through the Mac or Power Mac and a printer, tried different threads to find out what the problem is all... now angry... HELP PLEASE
Welcome to the HP Forums @NoisyParkser,
I stumbled upon your thread and read your messages on printing problems you have with your Photosmart C4180 connected to your iMac running 10.11 and wanted to respond with my own suggestions that might help. As I'm not sure if the problem is hardware or software related, we will touch both categories when troubleshooting.
Allows to test the equipment, perform a hard reset and make sure that the printer is plugged directly into a wall jack, then make a copy of the front of the printer. This does not involve the computer somehow and will show us if there is a problem with the hardware with the device.
Reset:
With the printer, unplug the power cord at the back of the unit.
Unplug the power cord from the wall outlet.
Wait at least 15 seconds.
Plug the power cord into the wall outlet.
Reconnect the power cord to the back of the unit.
If the printer does not by itself, press the Power button to turn it on.
Make a copy.If the copies are all problems, fill me in what you see coming and all errors you might encounter in.
If copies are fine, the problem is software related on the iMac somewhere, try these steps according to the computer:
- Reset the printing system
- Restart the Mac.
- Follow this guide: Printers HP - install Mac printer driver using Apple Software Update
- In addition, to download this driver: HP v3.1 for OS X printer drivers
- Try to print some of the different applications and let me know which you tested from and outcomes.
If you have trouble with the steps, let me know and I'll do my best to help.
Click the thumbs up below to say 'Thank you' & the "Accept as Solution" If the problem has been resolved it please and thank you!
All the best,
-
When I try to sync my phone with Outlook, I get the error message: "the operation ended unexpectedly. Occurred since that I have the phone. Were able to synchronize several times after that rename data files or reinstall but this no longer works.
Here are my coordinates.
PC: Dell Latitude D620
Phone: RIM Curve 8330
OS version: Windows XP SP2 (32-bit)
Version of Outlook: 2003 (11.8216.8172) SP3
The Office Manager version: 4.6 (also tried 4.5 and 4.2)
Phone model and device OS: 8330 Curve v4.3.0.127 (Platform 3.1.0.73)
Hello
It seems that one of the applications has some possibly closing the synchronization of corrupted data.
I test in Synchronization Manager and disable all options except the calendar, set of conflict
resolution for you inform of the resolution. Run the synchronization. If the program works and ends normally,
Add the following category, with notification to you. Repeat this until the program fails.
We are trying to determine which application has corrupted data.
Do you agree?
Thank you
Maybe you are looking for
-
I found that when burning DVDs my burner works about 1 X I have checked this on the web and found other forums, which suggests to make sure I'm set to DMA if available on the transfer mode. I have it on the "primary IDE channel" on device 0 transfer
-
HP Pavilion x 2 does not appear on my tv
Hi people. I recently bought a HP Pavilion X 2 2 in 1 laptop and you want to connect to my TV. The laptop has been upgraded to windows recentluy 8.1. When I connect using an HDMI cable, the TV recognizes that the HDMI is connected, but the laptop sc
-
Problem with button 'Load' and Boolean reset
Hello... I've built a simple VI to load a file ascii with 100 values, split the file into 4 segments (overlap of 50%) and perform the calculation of the SUM of the segments. Each segment is represented by a graph and has a LED that, when is ON means
-
Under XP, cannot delete a document located in the print queue
Cannot delete a document in Quebec to print now I can't print other documents
-
My computer blackBerry smartphones will not download CD software tools
Should what version I download it from the Web site? Also, how can I download music on my flip?