BCC shows the names on my computer?

Similar Questions

• How can I chang the name of my computer?

  original title: help ^^

  1. How do I chang the name of my computer?

  2 - when I put my helmet and I opened the video and then I took her out of the laptop sound not why?

  Here's how to change the name of your computer: http://www.howtogeek.com/howto/windows-vista/change-your-computer-name-in-windows-vista/

• How to show the name of Manager instead od managerId in the hr schema

  I have a requirement,

  I use oracle xe database to connect to the hr schema, I created EmployeeEO, EmployeeVO,

  in the user interface, I want to show the name of Manager instead of ManagerId, the problem is that both come from the same table.

  How to fully complete this requirement, buy using the capabilities of the ADF without doing any coding (also search)

  Hello

  You will need to create a ViewCriteria in EmployeesVO based on the EmployeeId that receives a parameter. Next, you will need to go to the tab of the accessors for EmployeeVO and add a new pointing to EmployeesVO. Then edit and shuttle to the ViewCriteria to the right and in the inputParameter for empId you write (or select) ManagerId. In this way, that this accessor class will always be information of your manager.

  Then create a transitional attribute with the value of the following expression: yourViewAccessorName.first (). = null? "yourViewAccessorName.first () .getAttribute ("FirstName") +" "+ yourViewAccessorName.first () .getAttribute ("LastName"): '"

  Hope this helps

• After using 3 CleanMyMac to optimize my system, Illustrator CS5.1 no longer shows the names of fonts in the menu dropdown. Difficulty?

  After using 3 CleanMyMac to optimize my system, Illustrator CS5.1 no longer shows the names of fonts in the menu dropdown. Difficulty?

  You need to turn it on.

• Groups Yahoo emails do not show the name of the sender

  When you receive emails from my Yahoo Group address "' displays only the name of the group without the sender's name. This just started happening in the last days.

  To diagnose problems with Thunderbird, try one of the following:

  • Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
  • Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX

  If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.

• Addon shows the name but no icon in the window customize

  I recently developed an add-on. However, once installed the icon does not show, but only the name of the addon in the window customize bar addon (or menu Australis).
  I have not seen this behavior in other addons, so I think it's probably something that I did wrong.
  Maybe I don't get the right size icon?

  You can try to ask the advice of the forum of the modules or the forum MozillaZine extensions development.

  • https://forums.Mozilla.org/addons/
  • http://forums.mozillazine.org/viewforum.php?f=19

• The printer problem: showing the name of the file: directory: model: title: topic etc.

  Original title: printer problem

  Whenever I have print a page of Microsoft Office or on the web, I have another print page after him the name of the file: directory: model: title: topic etc.  I rang the manufacturer of the product and said it was a Windows problem.  I had rung Microsoft Support and they could not help also and asked if I would like to speak to one of their technicians for $ 75 USD.  As I am from New Zealand it would have cost me probably $100 maybe a little more after the exchange fees and credit cards and not been sure if they would have the right answer.  Is there someone out there who may be able to help me because it costs me ink and paper?

  Salvation of the bones,

  Thanks for posting in the Microsoft Community Forums.

  According to the description, you get additional information when printing a document.

  1. what operating system you have installed in the computer?

  2. What is the brand and model of the printer?

  I suggest you to refer to the thread that the suggestion has solved the problem:

  http://answers.Microsoft.com/en-us/Office/Forum/office_xp-word/a-second-page-prints-whenever-i-print-a-word/7a2286e9-4C1B-4a62-9987-c3b823f03974

  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

• My screen is on its left side showing the contents of my computer, how do I put back straight normal face? is there a short-key

  My son pushed a short-key and my sreen went from showing the content computer straight to the left showing it please help me I'm tilt my head to see my computer screen propley

  Nevermind, I see my screen propley Yes

• How can I change the name of my computer that I assigned to Setup?

  I just did a system recovery and have an external hard drive to backup and realized I should have renamed the computer reconfigured slightly differently so I have separated on the external hard drive backups.

  As it sounds, as there is no involvement of the field...

  Use the computer name tab in the System Properties dialog box. To find this tab, use one of the following methods:

  • Click Start, right-click my computer, and then click Properties.
  • Click Start, click run, type sysdm.cpl, and then click OK.
  • Click Start, click Control Panel, double-click performance and Maintenanceand then click System.

  Change the name of the computer

  To change a computer name, follow these steps (in light of the foregoing...):

  1. Click the computer name tab, and then click change.
  2. Type the new computer name in the computer name dialog box.
  3. Click OK three times, and then restart the computer.

• Unable to show the XP on Vista computer and a few other networking issues

  Hello

  I tried to get my network set in place over the past two days without success.  The details of the network are:

  Main computer is under XP Professional SP3 with the printer and the router connected to it.  I also have a laptop running Vista professional that connect wirelessly to the router.  I am able to ping the desktop from the laptop, but not vice versa.  Both computers have the same subnet and default gateway address.  By reading some troubleshooting, it was advised to run the microsoft patch to install the LLTD Responder on the xp machine I did.  I can see the files in the subfolders, but when I run services.msc program is not for me to start.    Desktop and laptop computer are in the same workgroup.  Before you install the hotfix, I could see the laptop from the network to the desktop but now I can't.  I also noticed that even if I have the LLTD my laptop configured to start automatically, it is not this.  In fact, it seems to stop automatically, and I have to restart the service.

  I also try to put in place so that I can print from my laptop and my ipad sharing printer.  The printer and the desktop are set to share printers, but I can't find it on the laptop.  I'm assuming that once I see the desktop on the network it 'may' reslove this problem.

  Anyone have any ideas on what I can do to solve the problem?  I can always connect all computers to the internet. I also see the two computers on the network when I run the network configuration in norton 360.

  Thank you very much

  Emily

  N ° if it never works, then a firewall is not your problem.  Remember that Microsoft Networking can take up to 15 minutes to find a new devices on the network.  If it does not appear and you want to speed up the process a bit, try to search for the computer...

  Start-> Search-> [for files & folders (the classic case)]
  then, down in the section 'Search other elements', select 'computers '.
  Enter the name of the other computer, and then click "search now".

  This launches a pretty aggressive search for the other computer.

  HTH,
  JW

• After playback of MP3 files, random symbols will then show the name of file in XP

  Basically I'm on Xp, service pack 3 and for a while now, from time to time when I played usually a mp3 or other similar in windows media player, 10 minutes later it will pick a random file from my music folder and add a Japanese symbol at random at the end of the file name.

  Like "be the one" is played, 10 minutes later "be [a]" will now be the file name, only it never appears as the actual symbol, just a square, until you see the name on the windows media playlist where she will be written correctly
  So random, files are defined in the standard. Any help

  Hello again once, yes I ran the scanner.

  My avg updates automatically and I manually ran the update function, and it IS up to date
  I also managed to clear Media Player cache by entering the file manually.
  And as for now the problem disappeared, but as I said earlier, he arrived at random intervals and sometimes takes minutes so he could arrive and sometimes takes weeks. So I'll come back if it comes back. But so far no there no return
  Thank you for your hard work and dedication

• List of available MDX properties / always show the name of the Member instead of alias

  Hi all
  
  does anyone know if there is a list of all available MDX properties that can be used in a query with Essbase MDX?
  There is a very small list in the technical documentation (http://docs.oracle.com/cd/E12825_01/epm.111/esb_techref/mdx_properties.htm), but I know that there are many more properties.
  For example, a property that is not documented is ANCESTOR_NAMES:
  WITH MEMBER [year]. [false] '0', SOLVE_ORDER = 0
  SELECT {[year]. [Dummy]} on columns,
  [Account]. Properties of members ANCESTOR_NAMES lines
  OF [App.Db];
  
  Anyone know if there is such a list?
  
  And another question:
  The query displays always the alias of members (e.g. [account]. Members). Is it possible that by default the name of the Member instead of the alias is used? Without using the nom_membre property.
  
  Essbase version: 11.1.1.3
  
  Thank you
  Th

  To the second question about the name of the Member, try the following statement at a MaxL session:
  change the alias set session dml_output

• Show the name of file in PDF file

  Hi, hoping for help on what I think is quite a simple question.

  I want to create a single blank page PDF file that has a text field automatically and dynamically finished based on the file name of the pdf document. Thus, for example, if the file is named "My sample file.pdf", the pdf file is displayed "My sample file.pdf" and that is all. If I rename the pdf file in Windows Explorer to "My renamed file.pdf", when I then open the renamed "My file.pdf" file appears.

  I would then insert this PDF a page in an array of existing pdf files as their new No. 1 page to actually be a title for each page created automatically based on their current file name.

  My research suggests that is possible using Javascript in a text field or a form field (although I prefer the text field), however, that I have no experience with Javascript or its implementation of Acrobat, is impossible for me to do. The closest I got is a script that puts the name of the file in the background. Unfortunately this script maintains the new file name that comes to be superimposed on the old watermark of filename, rather that update. For more information the script was: -.

  this.addWatermarkFromText({)

  cText: this.documentFileName,.

  nTextAlign: app.constants.align.center,

  nHorizAlign: app.constants.align.center,

  nVertAlign: app.constants.align.bottom,

  nFontSize: 12,.

  ({nVertValue: 12});

  Ideally, I'd like the script to remove the file extension and if possible to split the output on two lines based on the file name part preceding / fact following a comma in the name of the file (which she would also deprive). For example, if one had a file named 'my sample file created the Monday.pdf', it would display as: -.

  My sample file

  created Monday

  If anyone has any ideas on this, it would be greatly appreciated.

  Regards and thanks in advance.

  Malcolm Mahr

  Add the following JavaScript to the document level:

  // Document-level JavaScript code
  (function () {
  
      // Get the file name of this document
      fn = documentFileName;
  
      // Get rid of the PDF extension
      fn = fn.replace(/\.pdf$/i, "");
  
      // Replace any comma/space combinations with a carriage return
      fn = fn.replace(/\, /g, "\r");
  
      // Set the field value
      getField("fn").value = fn;
  
  })();
  

  Replace "fn" in the statement of getField with the name of your multiline text field. This code runs when the form is opened. If you want to be updated when the file is saved, you can also place in case the Document were spared. Note that some operating systems and other things may have a problem with a comma in the name of the file. Underscore would be a safe alternative.

• Show the name of the group in the query when you delete the resource

  I IOM installation so that users and their managers can ask for ad groups and only managers can revoke this resource.
  But when I remove only to see the instance instead of the group key real name because of that it is difficult to determine what resource to revoke
  I see only the name of the resource (which is the same for all) and key
  
  How can I view group instead of the key name.
  
  Please tell me how, I need it urgent
  Thanks in advance
  
  Published by: user11758334 on August 3, 2009 14:48

  Try changing tjspRequestShowResolutionTiles.jsp

  You can follow these steps to achieve
  1. get the resource instance (it is available on the jsp page, check the page to see how it is used)
  2 get the shape of process data using the method of tcFormInstanceOperationsIntf getProcessFormData (id from step 1)
  3. get name the tcResultSet returned in step 2 by using method getStringValue ("UD_NAME") where UD_NAME is the name in the form
  4. on the page, find where targetResourceInstanceKey is printed and replace with the value found in step 3

  Let me know if it works
  Sam

• BlackBerry software remote access since Z10 for Windows 8 PC file shows the name of the computer, but no files

  I can't access the files on my PC from my Z10 in the "File Manager" application.  Connecting my phone to my old PC Windows 7 works fine, but when I select my new PC for Windows 8.1 in the File Manager displays the icon of waiting for some time he does display no files at all.  I have no problem connection from a PC to the phone to see the files of the phone.

  I checked everything I could think of or available in the BB regarding troubleshooting topic:

  -Blackberry link under the file tab remote, I have the box checked next to my phone and I've shared my C:\Users\username folder

  -two phone PC on my wifi network and are all both are signed to my single Blackberry ID account

  -Blackberry link is running on my PC (I even tried uninstalling and reinstalling, but has not made a difference).

  -J' rebooted the PC and the phone, but that has not made a difference

  -In the Blackvery link in my phone settings, I have 'BlackBerry Link' in position 'On' and I can see my old and new PC in the section 'paired computers '.

  -J' have the latest version of the operating system on my phone and the latest version of the Blackberry link.

  Any help would be appreciated!  Thank you.

  Z10 OS: 10.2.1.537

  PC operating system: WIndows 8.1

  BlackBerry link: 1.2.3.23

  I figured this out, finally. McAfee Firewall is running on the new laptop and turn it off allowed me to see the files without problem. Stupid, not solicited for McAfee firewall was the issue.