bcmwltry.exe with / DLL initialization failed in windows xp

Similar Questions

• Creating exe standalone vi with dll external fails

  Hello
  I work with Labview 2012 and a dll of Intan technology that provides a way to access their equipment.
  Everything works correctly in the Labview environment, but when I create an exe (DLLs included) and try to start the program I get no response from the hardware store.

  Clues?
  Need more information?
  Please help.

  All errors that help locate the problem? You clean errors after that dll or you would see if they appeared?

  If the main dll was not found, you would get dialogue "give me the dll.

  It seems more like dependent dll was not found. LabVIEW makes dll he calls in the file data, and dependents are disconnected.

  Where the Intan dll? If it's in the Intan installation folder, then specify path to DLL on block diagram.

  In some case manufacturer provides a number of DLLs that must be next to each other. You can specify this folder (including the main DLLs you call) in the section always included.

  Try to delete dll main executable file data, when it pops up the dialog box, browse to the location of origin. If it works, then this is location of dll problem. If it is not the case, there can be no problem with firewall configuration does not block execution guaranteed

• "initialization failed. Windows Boot Manager"is displayed when starting, but no problem boot OS.

  The error 'failed to start. Windows Boot Manager"appears every time when the PC starts, but the operating system still works and everything seems to work very well.

  My system is installed with Windows Server 2008 Standard 32-bit with two 146 GB RAID 1 SAS hard drive and a hard drive of 300 GB in RAID 0.

  Hello Rieze,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows Server 2008 and would be better suited to the technet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Best regards

  Matthew_Ha

• Error message: 400 bcmwltry.exe errors in an hour

  bcmwltry.exe error

  I get the error below continuously without interruption. I had a period of 1 hour 414 errors on this subject.

  This service is not in the computer management. I did the measures available in the http://answers.microsoft.com/en-us/windows/forum/windows_vista-windows_programs/sidebyside-errors-in-vista-ultimate/56f6ca3f-a8c3-4345-9de5-008b2e4e97f0 and it did not work (says there was nothing wrong with my computer).

  I applied the Package redistributable Microsoft Visual C++ 2008 SP1 (x 86) and 2005 (by the suggestion of: http://www.vistax64.com/general-discussion/265324-side-side-error.html )

  I upgraded to the Vista SP2 and updated my driver for the internet Dell Wireless. Help, please!

  Log name: Application
  Source: SideBySide
  Date: 17/04/2011-22:09:52
  Event ID: 33
  Task category: no
  Level: error
  Keywords: Classic
  User: n/a
  Computer: Missy-PC
  Description:
  Activation context generation failed for «C:\Windows\System32\bcmwltry.exe» Load Assembly Microsoft.VC80.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762' is not found. Please use sxstrace.exe for detailed diagnosis.
  The event XML:
  http://schemas.Microsoft.com/win/2004/08/events/event">
   
     
      33
      2
      0
      0 x 80000000000000
     
      1158
      Application
      Missy-PC
     
   
   
      Microsoft.VC80.MFC, processorArchitecture = "x 86" publicKeyToken = "1fc8b3b9a1e18e3b", type = "win32", version = "8.0.50727.762"
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
      C:\Windows\System32\bcmwltry.exe
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
     
   
  

  Hello Missy2485,

  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.

  Go to the Task Manager and stop the process or it will consume memory and can cause your computer down.

  I would check with Broadcom for additional help.

  Sincerely,.

• I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  I have the following error message when you try to access the settings preferences "load library failed with error 1114: (DLL) initialization routine failed. I use Windows OS 10. Can anyone help?

  HI lifeimagecreations

  Greetings!

  Please see this thread in the lightroom preferences entry CC2015 crashes with LoadLibrary failed with error 1114

  If this does not work, reinstall the program with administrative rights.

  Let us know if this helps

  Concerning

  ~ Assani

• MMC.exe crashes with the module failed Ntdll.dll.

  Original title: certmgr falls down to the personal certificate

  Hello

  a machine that has problems of management certificate gives me a time difficult.

  If I go to the personal certificate store and try to reregister a certificate the mmc.exe hangs with the module failed Ntdll.dll.

  The dll in System32 and Syswow64 are all two ok (digital signed)

  This problem happens in my profile and created a new.

  I have the Code 0 x 0000005

  The windows error report looks like this

  ==================================================
  File: mmc.exe
  Event name: has stopped working
  Time of the event: 29.07.2014 08:39:31
  Username: all users
  Exception code: 0xc0000005
  Exception offset: 0x000ccf63
  Fault Module name: ntdll.dll
  Fault Module Version: 6.1.7601.22436
  Path of the process: C:\WINDOWS\system32\mmc.exe
  Size of the report file: 20.428
  Report file path: C:\Users\All Users\Microsoft\Windows\WER\ReportArchive\AppCrash_mmc.exe_e8911f92836e49f026e82e5d30397fcc5e52eb60_cab_1db860b6\Report.wer
  ==================================================

  ==================================================
  File: sbus.exe
  Event name: has stopped working
  Time of the event: 28.07.2014 16:32:37
  Username: C5160554
  Exception code: 0xc0000005
  Exception offset: 0xdbdbdbdb
  Fault Module name: StackHash_0a9e
  Fault Module Version: 0.0.0.0
  The process path: C:\Program Files (x86)\SAP\FrontEnd\SecureLogin\bin\sbus.exe
  Size of the report file: 6.004
  The report file path: C:\Users\C5160554\AppData\Local\Microsoft\Windows\WER\ReportArchive\AppCrash_sbus.exe_446dd3b92ed2638c6f931bd393315bd4d6278_1ec49be1\Report.wer
  ==================================================

  Hello

  I discovered that there was another DLL loaded by filtering with ProcMon - this DLL is part of the SSO framework already uninstalled. After cleaning the residue, it did not crash more.

  Best regards

  Mr. Snipes

• Isass.EXE - Security Accounts Manager initialization failed OXC0000001 to start Windows XP

  Original title: Isass. EXE-SYSTEM ERROR MESSAGE IS ON AN ANOTHER COMPUTER & WON "T START.

  This is the error message when I turn on computer ISASS. EXE-system error Security Accounts Manager... Intialzation failed due to the following error: a device attached to the system is not fuctioning - OXC0000001 error status

  Jacqui T Hi,.

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  This problem may occur if the file Security Accounts Manager (SAM) is damaged or missing.

  Step 1: You can follow the steps mentioned in the article below

  Error message "Security Accounts Manager initialization failed" when you start Windows XP

  http://support.Microsoft.com/kb/316751

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• problem with babylon runing on windows 8-storage initialization failed (error 10)

  problem with babylon runing on windows 8-storage initialization failed (error 10)

  Hi Shlomy,

  1. when exactly you get the error message?
  2. do you have an error message?
  3. are install you authentic version of Babylon?

  This issue would have occurred due to some third-party programs, the origin of the problem. I suggest you perform the clean boot. Clean boot helps eliminate conflicts of software that occur when you install a program or an update or when you run a program in Windows. You can also troubleshoot or determine what conflict is causing the problem by performing a clean boot.

  How to perform a clean boot in Windows
  http://support.Microsoft.com/kb/929135

  Note: Follow How to reset the computer to start as usual after a clean boot troubleshooting article KB929135 to reset the computer in normal mode.

  If the problem only occurs with babylon click here to send a request to the Babylon 8 support team.

  Post us the results after trying the steps above.

• LabVIEW 8.6.1: nilvaiu.dll failed DLL initialization routine

  I have just upgraded to LV 8.6.1 on Windows Vista, and all my routines DAQmx won't load with the message:

  Error loading "nilvaiu.dll.

  A dynamic link library (DLL) initialization routine failed.

  According to some old posts, I tried to add write permissions to all of the files from C:\Program NIUninstaller Instruments, but that did not help.

  I also uninstalled DAQmx - LV 8.6 support and reinstalled but that has no effect.

  I also tried to run 'regsvr32' on the DLL, but failed with a similar message.

  Everyone knows this?

  Is there a solution?

  Jason

  I encountered the same error of nilvaiu.dll after you have reinstalled the drivers LV2009SP1 and NI of DVD 2010 - DS1. While working through the error with me, Ben, AND found support this resource: ' software failure OR when PAE (physical address Extension) is enabled on the Windows operating systems '. (Document ID 54D9I6M6). This turns out be the problem of the root of both my 'nidevmon.exe' failure on boot failure and "nilvaiu.dll" on DAQmx support: recent DAQ libraries are incompatible with the enabled physical address extension.

  I am running Windows Server 2003 with 4 GB of RAM. PAE is enabled by default with Server 2003. (Look at system-> general to see if the EAP are enabled: it is just below the RAM.) As Microsoft recommends that EAP not be disabled because it ensures the safety of execution, I followed the second of the two suggested methods.

  I've edited the boot.ini file (System-> properties-> Advanced-> startup and Recovery-> Edit), added/maxmem = 4096 for the start command and restarted. Nidevmon.exe both nilvaiu.dll errors have been corrected with this change.

  System-> general reports now 3.25 GB of RAM (vs 4.00 before) so I lost a little more memory than expected. I can watch using the /burnmemory switch, that Microsoft recommends more/maxmem because maxmem "does not take into account memory hole". I'm trying /burnmemory = 16 now.

  -Rob

• "A dynamic link library (DLL) initialization routine failed." NVIDIA drivers

  So I recently wanted to install new NVIDIA drivers on my computer.  The installer downloaded completely and at the time where he finished extract the files of the error "a dynamic link library (DLL) initialization routine failed."  Since then, I uninstalled my drivers and I can't always install the new drivers.  Now I'm stuck with no driver at all.

  I asked this question on NVIDIA support page and have not received a response, so I came here to ask.  Help is very appreciated.

  Thank you

  I understand your willingness to help me, but I have advanced and reinstalled windows. Got the new driver installed and everything works fine.

  Thank you

• of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or it was partially signed but not totally witht the

  media center ehshell.exe received the error message 205 units

  of the Assembly's strong name validation failed "c:\windows\ehome\ehshell.exr". The file may have been tampered with or has been partially registered, but not totally witht the private key

  After you have installed the XP SP3.

  How can I fix this error.

  Media Center worked fine until I installed SP3.

  Hello

  I imagine the inconvenience that you have experienced, but don't worry, we are here to help solve the problem and guide you in the right direction.

  Ehshell.exe is a Windows system file that is used to run Microsoft Media Center. It is not a critical system file. However, the ehshell.exe file can become infected and cause errors trying to run certain programs. If the ehshell.exe is absent, it can also cause errors. Reinstall a clean copy of ehshell.exe with the Microsoft System Restore.

  (a) click on the "Start" menu, then click on "programs". Scroll down and click on "Accessories," then "system tools." Click "System Restore."

  (b) click on 'Next' in the system restore window to view a list of points of restoration which has been archived.

  (c) select a restore point created before the ehshell.exe file becomes corrupt or got deleted. If no restore point until this time is listed, click on "Show restore points more" to select the one that is before this date. Click 'Next' to choose which restore point.

  (d) click on 'Finish' to start the system restore. The computer will restart once the process is complete and the ehshell.exe file is reinstalled.

  If the problem persists, follow these steps:

  You try to run the following commands to re-register all Media Center services:

  (a) close Media Center

  (b) click on the start menu, choose run and type cmd , and then press ENTER.

  (c) in the command prompt, run the following commands to type (or copy/paste) the one at a time and press on enter:

  · Regsvr32.exe atl.dl

  · C:\WINDOWS\eHome\ehl Sched /unregServer

  · C:\WINDOWS\eHome\ehSched/service

  · C:\WINDOWS\eHome\ehRecvr /unregServer

  · C:\WINDOWS\eHome\ehRecvr/service

  · C:\WINDOWS\eHome\ehRec.exe /unregServer

  · C:\WINDOWS\eHome\ehRec.exe/regserver

  · C:\WINDOWS\eHome\ehmsas.exe /unregServer

  · C:\WINDOWS\eHome\ehmsas.exe/regserver

  · Restart the Media Center

  Hope this helps and let us know if you need more assistance. We will be happy to help you.

• Error: ApopleSyncNotifier.exe. Application has failed to start because Core Foundation.dll not found in the system startup

  Original title: AppleSyncNotifier.exe and RUNDLL

  When I boot I get 2 drop down boxes 1 to ApopleSyncNotifier.exe.  Application has failed to start because Core Foundation.dll not found.  Re-Setup, the application may resolve the problem.

  RUNDLL error loading C:\WINDOWS\nulogry.dll.  The specified module could not be found.

  How can I fix them?

  Hi saintaugie,

  1. have you installed any Apple Sync program on the computer?

  We found that this happens if MobileMe on the computer is defective. To resolve this problem, we recommend that you uninstall MobileMe and check if the problem persists.
  a. to see How to change or remove a program in Windows XP
  b. in the list select MobileMe and uninstall it.
  c. restart the computer once the program is uninstalled.

  We found the same problem on the Apple Forums.
  See Impossible to locate the CoreFoundation.dll AppleSyncNotifier.exe error
  

  Note: You might consider to reinstall the program if you need. However, we do not recommend to install non-Microsoft programs as Microsoft has not tested the feature.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• error 1114 dynamic link library (DLL) initialization of the routine failed.

  I can't connect to internet

  Windows could not start the Service diagnostic on the local computer policy.  error 1114 dynamic link library (DLL) initialization of the routine failed.

  What is the solution to this problem everyone?

  Hello
  1 did you change on your computer before this problem?
  2. When you receive this error message?
  3. are you using Internet Explorer? If Yes, what version of IE are you running?
  Find out what version of Internet Explorer you are using
  http://Windows.Microsoft.com/en-us/Windows-Vista/find-out-which-version-of-Internet-Explorer-youre-using

   
  Follow the suggestions and check if that helps.
  Method 1
  (a) click Start .
  (b) in the search box type services.msc
  (c) right click on Diagnostic Policy service and go to the Properties.
  (d) select Auto under Startup type.
  (e) click Start .
  (f) click on apply and OK.
  (g)restart your computer.
   
  Method 2
  You can run the System File Checker.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833
   
  Method 3
  You can perform the clean boot to see if a service is causing this issue.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual
  See also:
  The problems of Internet connection
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems

   

• Windows vista home premium displayed "startup initialization failed" recovery/repair could not fix

  Gateway Laptop preloaded vista home premium displayed "startup initialization failed" launched the recovery/repair utility and was not able to repair.  now when you start the computer it will launch recover through process then the screen from windows with dots streaming on bottom is gets.   matter of fact that the screen is still and only way to stop it is to unplug the power.  a recommendations there...?  friends computer so HELP!

  E-mail address is removed from the privacy *.

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And see if the hard drive tools help you.

  "7 free disk hard test Programs.

  http://pcsupport.about.com/od/toolsofthetrade/TP/tophddiag.htm

  See you soon.

• a dynamic link library (DLL) initialization routine failed.

  Original title: DLL routine failed

  I downloaded a program from CNET. Did not work so I removed it. A day or two later, I get the following error a lot.

  There was a problem starting

  C:\Users\EDITIN~1\AppData\Local\Temp\sbussnv\ssnyoyr\wow.dll

  a dynamic link library (DLL) initialization routine failed.

  I ran the auditor system and program files Microsoft security and found no integrity issues.

  At this stage it would be easier to upgrade to Ultimate (I use Professional now) that in order to understand the problem of the DOF. I guess the upgrade I will lose all files/programs, correct.

  Thank you

  Yes, that's correct Loran.  You can use the Professional disc window and perform the upgrade. This will put just the new copy of your computer's system files.

  But if you have the Ultimate version, you can use the ultimate disc or the ultimate product key to upgrade.