Error message: 400 bcmwltry.exe errors in an hour

Similar Questions

• When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135).

  Original title: initialize 0xc0000135

  When I start my PC, and before you start I receive this message from InfoCenter.exe - Application error - the application is not initialate properly (0xc0000135). I just click OK and continue. Any problem? Is this necessary application?

  Walter Rodriguez

  E-mail address is removed from the privacy *.

  10/07/12

  14:57

  Hello

  1. do you receive this after you see Start button or entry?

  2 have you made any changes to the computer before the show?

   

  Method 1: Boot errors are fixed by the clean boot.

  Perform the clean boot and see if that helps.

  A clean boot to check if startup item or services to third-party application is causing this issue.

  Reference: How to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  http://support.Microsoft.com/kb/929135

  Note: when you're done to diagnose, follow step 7 in the article to start on normal startup.

   

  Method 2: Some malware parody itself as InfoCenter.exe, especially when it is located in the folder c:\windows or c:\windows\system32.

  I suggest you make a system full scan just to be sure.

  Here is a link that will give you information on how to perform a full scan of the system:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  , Note 1: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  Note 2: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

• During the attempt to re - install the iTunes software, I got the Windows 126 error message. APSDaemon, exe-Unable to locate component. MSVCR.90.dll was not found. Re-installing may fix this problem

  I use Windows XP PRO Sp 3. I tried to open an iTunes download & got this message. "APSDaemon.exe that this application was able to start. Could not locate the component that msvcr.90.dll was not found. Re-installing may fix this problem. "
  All this happened after I tried to install a new update Apple iTunes. He kept saying that he could not install... I tried several different things to solve this problem, including doing a system restore in frustration, for 2 days before today... I tried to update iTunes, not always the case. Help, I'm a no techno, so please do not just refer me to somewhere else, I will never understand what I'm told to do, whenever I am sent somewhere else, I can't solve my problem & give up in frustration. Please can someone take pity on me & guide me through the fix?
  A related problem, I tried to run iTunes from the desktop, but I got was the Mini audio player.
  I just tried to recreate that & got again the error messages, the one listed above main & another one that says "iTunes is not installed correctly. Please re - install. Error 7 (Windows error 126).
  Whenever I try to re - install, I get the error again on the component .dll.
  I hope that's enough info to try & help me. I really need this fix to work as I have many meditations downloaded on iTunes, because Windows Media Player could not open the files.   It would take me hours & hours to find where they came, they were downloaded over 4 years!
  Thank you in advance.
  Sylvia

  If you have not had luck in iTunes (https://discussions.apple.com/community/itunes/itunes_for_windows?view=discussions#/?tagSet=1234) forum, uninstall and reinstall iTunes as described below:

  To perform a "clean" iTunes installation uses this technique proposed, from Support of Apple HT1926 article.  (If you are using Vista, see THIS instead).

  Go to control panel > Add/Remove programs
  Remove these applications in the following order (do not restart your computer if you are prompted during this process):

  1 iTunes
  2. Apple Software Update
  3. Apple Mobile Device Support
  4 Hello
  5 Apple Application Support (iTunes 9 or later)

  6. iPod for Windows (this may or may not exist, be it, it is not necessary, then we can remove it)

  7. iPod Updater

  8 QuickTime

  Open my computer > C: > Program Files
  Delete these files (if present)
  1 iPod
  2 iTunes
  3 QuickTime

  Follow these steps if the message "cannot delete iPodService.exe: it is used by another person or program" appears when you try to delete the folder of the iPod.

  1. Make sure that you have iTunes and iPod Update utility are not open.
  2. Press Ctrl-Alt-Delete.
  3. Select Start Task Manager.
  4. Click the processes tab.
  5. Locate the iPodService.exe in the list.
  6. IPodService.exe-click and choose end process.
  7. Quit Task Manager.

  Empty your temp directory:
  Open my computer > C: > Documents & Settings > username > Local Settings and delete the contents of the folder called "Temp".

  If you don't see the local settings, enable hidden files:
  Tools > Folder Options > view tab
  Select Show Hidden Files & folder, and then click OK

  Once this file is empty, restart the computer

  NOTE: If you have trouble uninstalling applications, or if you have a problem, reinstall iTunes because the installer complains that it can not uninstall the current version of iTunes, see the 'Installation issues' section below.

  Download & reinstall iTunes from here: http://www.apple.com/itunes/download/

  Installation problems

  There are several tools to deal with problems installing or uninstalling applications.  If you have these problems, the following should help.  Before using one of these tools (including #3), you must create a restore point from the system first (or back up the registry with C:\WINDOWS\ERUNT).  See http://windowsxp.mvps.org/registry.htm a complete disk image would be safer if you have this ability.

  1 Microsoft has a program install and the resolution of the problems of the uninstalling which is supposed to "work better" and be "safer" to use the old Install Cleanup Utility (3 below).

  2. free Revo Uninstaller.  You can also download a trial version of uninstaller Revo's ' Pro', which has a few more aggressive cleaning options, but this should not be necessary.

  3 Microsoft Windows Install Cleanup Utility.  Although this tool has been the preferred tool to deal with the problems of Windows Installer, Microsoft removed from Microsoft download servers because it seems sometimes deleted more than he was supposed to (I believe this was linked to Office uninstall).  You can still get Windows Installer Cleanup here--> http://majorgeeks.com/Windows_Installer_CleanUp_Utility_d4459.html utility

• I get error message 0x7c919af2 sychost.exe 0x00000010

  Message: I have windows professional XP and SP3 also internet exploror 8 installed but whenever I try to download the fix it Center Online I get the error message unhandled exception has occurred in the creation of the specified web proxy error in the "proxy system.net/default ' configuration section ' advice on how to deal with this would be appreciated also at the top of the boot from my computer , I get error message 0x7c919af2 sychost.exe 0x00000010 any advice on this would be also greatly appreciated

  Why don't you send the error message that is accurate and complete to see you?

  Here is a folk remedy for this situation if this is what you see (or similar looking) of svchost.exe:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  It seems that the last update for Windows Media Player may contribute to this problem when the system has the Windows Driver Foundation Service active and running.

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you should disable the WDF Service.

  Click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services Applet

  Locate the Windows Driver Foundation - User-mode Driver Framework Service, right-click right the Service, select properties and choose disabled and OK your way out of the Services Applet to save the changes.

  Note that you will not be able to 'Stop' Service first, but it's OK.

  Restart your system (the WDF service is now disabled) and check your failure condition now.

• I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe.

  original title: error with ehshell.exe

  I have Windows XP Media Center Edition Version 2002 with Service Pack 3 and I tried to run Media Center but I get an error message with ehshell.exe. Could you help me?

  This problem exists since the 1st Media Center. SP2 and SP3 had a difficulty, but it is obvious that it doesn't always. The same problem still exists in Vista today with a lot of other carried over from XP. System restore would work, but you do not have any good restore points so reinstall an operating system seems to be your only option.

  You probably don't want to do an OS reinstall you need for Media Center, but since it does not at all, you might want to play then remove the Media Center updates and or SP3 and reinstall them.

• When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.

  original title: log question.

  When I try to connect my computer with XP operating system, I get this error message to: rund1132.exe and cannot log out.  How can I fix?

  Hi KERRYYX,

  1. Did you the latest changes on the computer?
  2. When was the last time it was working fine?
  3. You have security software installed on the computer?
  4. What is the full error message that you receive?
  5. Are you able to restart and shut down the computer?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See section to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  You cannot log off, restart or shut down your Windows XP-based computer

  http://support.Microsoft.com/kb/831431

• I updated XP Professional with service pack 3. On reboot, I get an error message ' WZCSLDR2. EXE

  XP Service Pack 3 update restart "Entry Point not found" error

  I updated XP Professional with service pack 3. On reboot, I get an error message ' WZCSLDR2. EXE entry point not found apsGetReady could not be located in the library of links wlanapi.dll Dynamics '

  Anyone know how to fix this?

  Hey, Billy,

  You have a DLink wireless network?

  Start > type MSCONFIG

  Press enter

  Click on the Startup tab

  Look for the process and clear the check box

  Click on apply, ok

  Restart your system

  Check to display new message about using the system configuration utility which shows the starting or you will be be harassed constantly.

  Error message every time that you start XP

  http://support.Microsoft.com/kb/950720

• XP stopped working - error message mentions rundll32.exe and activation XP

  So in the middle of downloading something last night my Avast anti virus kicks and says something about the files looking for suspects. Immediately, I cancelled the download and was 99% sure that I had deleted all the files wrong. This morning, however, when I turned on my laptop computer it wouldn't let me load XP and came up with an error message of not being able to read the license for windows and needed me to activate it. When I click on 'no' my desktop background loads, but nothing happens when I click 'Yes', load of my wallpaper and a box will appear where I presume he was telling me how to activate it, only nothing loaded. I guess that he should be connected to the internet which, for some reason, he did not and I had no access to anything else; No start button, no task manager, Control Panel No.

  Luckily my laptop has been implemented with a dual boot in order to start and use the partition with the original OS that came on the laptop (Vista) to access the XP drive. As the error previous message stated rundll32.exe they advised me to replace it and and then scan with Malwarebyte s Anti Malware and removed all infected files that came. But nothing has changed.

  Could I have deleted something that is used in conjunction with the rundll32.exe? If Yes, what? And is there anyway to get it back?

  I have read similar problems online and advice has been to start the XP cd to repair or reinstall, but how am I wanted to do when I can not load even XP to access the CD drive?

  Can anyone help?

  Florie

  Hi Florieness,

  · What is the exact error message that you receive with the error code as appropriate?

  · What is the service pack installed on the computer?

  · What is the number and the model of the computer?

  Try the methods below:

  Method 1:

  Try to perform the last good configuration on the computer and check if you are able to boot to the desktop. You can check the link for the steps below: how to start your computer by using last good known Windows XP Configuration: http://support.microsoft.com/kb/307852

  Method 2:

  If the first method does not work, you can follow the procedure (method 2) from the link below and check off the results: you are prompted to activate Windows XP or Windows Server 2003, each time that you start the computer: http://support.microsoft.com/kb/312295

  With regard to:

  Samhrutha G S - Microsoft technical support.

• An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk".

  Hi all

  An error message appears every time I start my laptop Alienware of window 7, the message reads: "wscript.exe - no disk" there is no disk in the drive. Please insert a disk into \Device\harddisk1\DR1.

  I'm a bit confused with this error message, I don't know if there are viruses in my computer, or the reason why this error message whenever I start my computer,

  Although I installed file encryption software.

  This could be a virus? and how to prevent this error message appear on my computer.

  Sounds like malware. Run msconfig.exe, and then selectively uncheck items under the Startup tab until you find the culprit.

• error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error.

  original title: Skyrim .dll error
  When I press play on the Skyrim Launcher button, nothing happens. I tried to open the folder and run the TESV.exe and got an error message saying "TESV.exe - bad Image. d3dx9_42.dll not is either not designed to run on Windows or it contains an error. Try to install the program by using the original installation media or contact your system administrator or the software vendor"I run Windows 7 Ultimate, and I've updated all my drivers and directX and uninstalled and reinstalled Skyrim repeatedly. I replaced the DLL in question and also organize sfc/scannow. Nothing seems to work, I tried all of the solutions I found online, nothing helps.

  I really want to start playing this game... huge fan of Elder Scrolls...

  Hi MattHamlyn,

   

  1. did you do with the last changes made to your computer before this show?

  2 you are logged as administrator?

  3 you are installing the game online or using a CD/DVD?

   

  
  

  I suggest you to follow the steps below and check.

   

  Method 1:

  I guess that your operating system is Windows 7 64 bit.

  1. click on the Start button.

  2. Select computers

  3. click on your C: drive

  4 program Files (x 86)

  5 steam
  6 Steamapps

  7 common

  8 Skyrim

  9 TESV
  TESV is the game itself.

   

   

  Method 2: put the computer to boot and check if you can play the game:

  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

   

   

  I hope this helps.

  Thank you.

• Homepage with/bcmwltry.exe alone. Cannot change user?

  I disabled the checkbox on the cache. Now I can't login because I'm an error/bcmwltry.exe. How do I change users so I can re - check cache? I can't do anything. This is what facebook told me to do when I didn't have a gift in my gift box. Stupid of me, I can't have any other user except me and I'm an administrator, but I have another admin also account, how do I get so I can undo what I've done? single woman seeking man alone to work

  You can get the default Administrator Windows XP created when you installed everything first, or when it has been installed.

  To do this, restart your computer and press F8 repeatedly until you get a boot options screen.

  You want to use the arrow keys (the mouse doesn't work here) to select "start in safe mode".

  Press ENTER.

  You will come to the login screen and see a new administrator account.

  Click on it, do not fill in the password and press ENTER.

  This SHOULD allow you acess in the computer where you can undo what you did......

  Young people and learning... Have mercy - Chaos if this post solves your problem, please click 'Mark as answer' or 'useful '. This helps other users having similar problems find the answer faster.

• Windows 8 freezes and gives the Blue error screen every hour approximately

  Hello guys. I have a problem with my system: windows 8 freezes and gives the Blue error screen every hour or more. usually it freezes, displays a blue error screen (clock watchdog timeout knode or not handled exception or something on a system request), I force restart it, and then it happens again (sometimes 3 - 4 times in a row, then it will be fine for another time). Here is the link to my dump leader : https://www.dropbox.com/s/uv27xr54esjlen0/MEMORY.DMP?dl... . The machine I built myself: amd fx 8350, card mother m5a97, dvd - r, 1 ssd, 1 hdd, PSU 500w, gtx 650 ti video. Also, here is a report of CPU monitor ID: https://www.dropbox.com/s/k1ma0m6maap404q/HWMonitor.txt... . I have already done all the windows, direct x updates and drivers and ran ideas
  If anyone has advice like how to do to solve this problem, please help me because I'm going crazy.

  Thank you.

  AS

  DMP file is corrupted and useless.  Please reconfigure your system for dmp files small as described in this wiki

  
  
  Please follow our instructions to find and download the files, we need to help you fix your computer. They can be found at here

  If you have any questions regarding the procedure, please ask

  Please provide us with your administrative Event Viewer logs by following these steps:

  Press Win + 'R' and type eventvwr > enter

  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  
  Navigate to:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  
  

• bcmwltry.exe with / DLL initialization failed in windows xp

  I write a question on behalf of the client. Here's the problem of the customer:

  Playing Cityville Facebook my laptop crashes every time with the following problem, bcmwltry.exe with / DLL initialization failed. I don't know what it is or how to fix it?

  Hello
   
  ·         How long have you been faced with this problem?
  ·         Did you do changes on the computer before the show?
  ·         The problem happens only when playing Cityville Facebook?
   
  bcmwltry.exe is located in the C:\Windows\System32 folder, but is not a Microsoft System file. It's a Broadcom Corporation Wireless Network Tray Applet.
   
  Go to the Task Manager and stop the process, or it will consume memory and can cause your computer down.
  To complete the process in the Task Manager, follow these steps:
   
  a. press the keys Ctrl + Alt + Delete , and then select the Task Manager
  b. end of the process(bcmwltry.exe) running in the background
   
  You can also consult with Broadcom for additional help.
   
  Hope this information helps.

• What to where the message reads "taskeng.exe is infected."

  I use Vista

  A Live Platinum security program installed on my second computer.  I can't access anything whatsoever and the message says "taskeng.exe is infected."  Tried to remove the program, but the symbol shows still on the line of the task.

  Use the instructions in http://www.bleepingcomputer.com/virus-removal/remove-live-security-platinum

  Do not click on ads; Use the written instructions.

• I get a message from msnupdate.exe

  I get a message from msnupdate.exe, and when I click on it it says that it is a program not identified, in order to cancel it. I did some research and news is mixed is this a virus? I ran the Norton security, Malwarebytes and superanti spyware and they find nothing. I tried to find the download free skybot but I'm not sure to find the right one. Help, please.

  Hi Alexis570,

  Step 1:

  MSNUpdate.exe is part of the process of automatic update MSN. This indicates that the latest version of MSN has finished downloading and is waiting to complete the installation. It is quite persistent and ask permission whenever you exit MSN.

  For more support on this, post your request here by selecting of MSN Explorer:https://support.msn.com/Default.aspx?wa=wsignin1.0

  Step 2: Online virus scanner.
  1. visit the following link and scan full service: http://onecare.live.com/site/en-us/default.htm

  Bindu R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.