BDP-s570 used to connect-

Similar Questions

• BDP-S570 - does not connect to internet via wifi

  I just bought this today and it does not connect to the internet via wi - fi. I'm entering properly (my iphone, ipad and computers connect very well). I called tech support and they had no idea what either. I then connected with an ethernet cable, updated to the latest firmware and tried again with no luck. Does anyone have any suggestions? It shows that the wireless is OK, but Internet Access - failed. When I return to the guests and have it analyzed the available networks, it shows that I am connected... something is weird. I'm back if I can't make it work in the next day or so.

  Network problems can certainly be difficult to diagnose.
  Here are some useful steps to check where your problem is.

  Check the IP address: is it 192.168.x.xx? or 169.xxx.x.xx
  If you have an address 169 it is a fake connect.

  What kind of network do you have? It's a Modem/Router combo? This is a modem connected to a router and then your Blu - ray player.

  the router/Modem combos are more complicated, and you need to consult your provider of Internet services (ISP) to connect to help. (maybe a MAC filtering problem?)

  If you have a problem with your Modem/Router try get a router and connect to the modem, you can have the best success with a stand-alone router you will have with a handset as they are less complicated to use.
  If you already use a stand alone, try to temporarily disable your security and test it without warranty.

  is the firmware updated on your router (not the S70 but the router) the latest firmware is sometimes useful.

  Best regards
  Kimberly

• BDP-S570 not out of HD audio formats

  I have audio output with my BDP-S570 problems. BluRay connected to the Denon AVR-1911, through cable high speed HDMI. Denon then connected to Bravia KDL-55HX800 through same cables. 3D video works fine but I'm not getting any outputs audio TrueHD or DTS HD and not even get regular Dolby incidentally. Output on just says Denon Multi Ch. I have a PS3 connected to the Denon even with the same cables and output HD audio very well. I realize that I can just use the PS3 for the same use but still need to understand this problem. I have read a lot into that and have fooled with several settings, but nothing seems to work. Am I missing something simple? Any help is greatly appreciated.

  Figured it out. Just in case anyone has the same problem, you have to set Off BD Audio Mix. (Mix = is the default.) When the mixture is turned on, the player decodes and output multichannel PCM. Now I get the DTS HD and the sound is incredible.

• Question: BDP-S570 or BX57 internet multi-channel flow?

  Hi all, I noticed recently that when I listen to the audio or video content on the network as my BDP-S570 diffuse now as a multichannel surround sound instead of the 2 stereo channels.
  I don't know if this is caused by the latest firmware I installed or changed content providers (or the Sony Server site) in a recent past a few days to send their audio in 5.1 multichannel, now. Or finally if my BDP-S570 went buggy and it's stuck in the PCM multi-channel streaming mode.
  It broadcasts my network all music and video internet connections in multichannel sound, even if I put the BDP-S570 "Downmix" mode setting of stereo 2 channels. I swear before I made this latest firmware update, I always had that 2-channel stereo audio from the internet network connections.
  So I need to know and ask if someone else becomes sound mode of 5.1 channels of their Internet stream?

  Update: too bad people, I found my answer. The cause of constantly multichannel PCM streaming of all my network connections was because I had the BDP-S570 DTS parameter defined on ' Neo: 6 Music ' instead of 'Off' in the settings menu. I set this to "off" and all the music from the internet is now back to regular 2-channel flows. for info. case solved.

  I'm glad that you managed to fix the problem yourself. If you have additional questions, please let us know and we will be happy to help you.

• BDP-S570 and SACD

  Hi, I'm new on this forum, but long-time Sony fan and supporter. I recently bought a new Sony BDP-S570 BD player to go with my old Philips 32 '' LCD HDTV, the new Sony KDL-46HX800 3D TV and the STR-DA4600ES receiver. I have also several audio SACD discs I wanted to play with this configuration.
  Here's the problem I have:
  I currently have my receiver output HDMI connected to my HDMI TV Philips entry. I have my BDP-S570 connected to the Sony STR-DA4600ES HDMI4 entered. I put the BDP-S570 to output SACD PCM since this receiver that I discovered after I bought it does not support the SACD DSD decoding. Anyway, in PCM mode when I try to play any disc SACD, I see video playback on the TV screen, but there is no audio output. If I put the drive to play only tracks CD (as opposed to the SACD titles) of the disc, then it plays audio in stereo via the PCM mode very well.
  I narrowed down it to her get to play SACD by disconnecting the HDMI TV to receiver connection. If I remove the connection HDMI to the TV, the BDP-S570 SACD multichannel audio stream to the receiver. If I turn on the TV the audio stream disappears again. If I connect the player to a compatible old receiver from Onkyo NR-905 HDMI 1. 3A, she plays SACD audio fine even with connected HDMI TV. So it seems to be a bug in signaling of handshake in my Sony (receiver and BD player) components.
  Sony support, please have your engineers check this aspect of the game of the SACD through your own line of Sony STR-DA4600ES of receivers with an old connected HDMI TV. It simply doesn't get it!
  Sorry for the long-winded post but no other way to describe the details of my configuration to explain it all. Is there a fix in the works for more reliable SACD playback on this player BD BDP-S570 3D? Oh, BTW, I installed the latest firmware update from 13/02/2011 or there abouts. Receiver was last updated available also new out of the box. Please tell me Sony is concerned and is looking to fix this incompatibility in the next version of the firmware! Thank you!

  I just update my situation with this problem of reading SACD I posted. I see nobody else was interested, but I'll post my resolution and conclusions.

  I got my BDP-S570 to play multi-channel SACD through my receiver STR-DA4600ES now by removing a HDMI switch which is connected between a video output HDMI to my receiver and my TV HDMI input jacks. It's the HDMI switch which was somehow not the right signals to the system causing the BD drive to not stream of SACD PCM signals to the receiver. As soon as I removed this switch HDMI from the signal path, it al started to work and read its SACD via the receiver.

  Also, I just noticed that the BDP-S570 is streaming music network in multichannel format now on Pandora music! I never saw blue light multichannel light upward when streaming music on the internet before. I don't know if it is also a symptom of the switch HDMI sending bad communications signals to the player OR if there is a change in the last update of the firmware that I installed on my BDP-S570. It's streaming multi-channel music on Pandora as I type this post!

  Update: I think the BD drive his downmix PCM multi-channel had put instead if 2-channel PCM. If this can explain why I see multichannel streams now too and has not seen him before. HDMI switch issue was also this masking of screening until previously I suspect. Now with HDMI switch out of the picture, it appears as a multi-channel as it supposed to.

  Update2: Well I just tried to change the setting to "DownMix" multichannel stereo PCM BD drive. Then I turned off the BD drive and turned back on to ensure that it restores its settings. I pulled to the top of the current internet music and video broadcasts and guess what? The Sony receiver is always get a stream PCM multi-channel (surround sound)! So it isn't the "DownMix" setting, which is the only cause. Apparently after I loaded the last firmware for this player, it plays now all this internet stream (music and video sites shows) in Multchannel surround sound mode.

  Update: too bad people, I found my answer. The cause of constantly multichannel PCM streaming of all my network connections was because I had the BDP-S570 DTS parameter defined on ' Neo: 6 Music ' instead of 'Off' in the settings menu. I set this to "off" and all the music from the internet is now back to regular 2-channel flows. for info. case solved.

• I have five Airport extreme with their network of people names different location home.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  I have five airport extreme, with their network of people of names in a different location in the House.  I have a brighthouse router that I use to connect to all the extremes of the airport.  I experienced the problem of connection to the internet.

  Are all connected to the Brighthouse router by Ethernet extremes? Are all of the extremes configured as bridges?

• iPhone 6s use usb connections in my car

  6s IiPhone uses usb connections in my car

  iPhone devices no load carrier via the USB Ports of the music player

• What is my Skype Id when you use facebook connect

  What is my Skype id when you use facebook connect I can not find not to give people to connect to me thank you very much

  Traore can use your generic name of Skype:

  Facebook:yourname

  where yourname is the name you use to log into Facebook.

• How will I know if my Airport Extreme has the latest firmware?  And (not related) how to change the password used to connect to my network?

  I think I bought the latest version of Airport Extreme.  It is the unit which is rectangular, is about 6 to 7 w., etc.  I have some basic questions that I do not understand:

  1. How will I know if I have the latest firmware for this device?  I read a few posts that make it sound as if it was just automatically updates.  Is this true?

  2. can someone tell me how to change the password used to connect to my wireless network?

  Thank you very much!

  Chris

  If a firmware update is available, AirPort Extreme flashes orange.

  The most up-to-date version of the firmware is 7.7.3.

  You can see what version you currently have the following on your Mac...

  Open Finder > Applications > utilities > AirPort Utility

  Click on the image of the AirPort Extreme

  Look for the Version

  If the new firmware was available, you will see a button update here

  To change the wireless network password...

  Click on edit in the window smaller than you watched just to check the firmware version

  Click on the Wireless tab at the top of the next window

  Go back / change the wireless password and enter a new password

  Do the same thing to check

  Click Update at the bottom right of the window and give the airport a minute full for restart

• OfficeJet Pro 8625: Which of the 4 rear usb ports can I use to connect to the computer

  There are four USB ports on the back of the printer.  Group of two ports on the top and another group of two below.

  Which of the 4 ports should I use to connect to the printer.  I intend to use the ability to fax from the printer.  Best, Aaron

  Hi Aaron,

  There is only a signle USB pet at the back of the printer, not 4

  To connect the printer to your PC, plug the USB to the USB Port rear, as shown below:

  

  To connect the device as a Fax, connect a phone cord from 1 d to a wall phone jack.

  Kind regards

  Shlomi

• When a second (another) user tries to connect using the connection to distance that a message "select a user to disconnect so you can connect.

  Original title: Remote Desktop

  We have Windows Server 2012 essentials (evaluation version) installed and working.  When connecting to even via the remote desktop connection it works fine, but when a second (another) user tries to connect using the connection to remote, a message "select a user to disconnect so you can connect.  The names of the 2 users are displayed the first is the name of the administrator of the local server and the second is the remote desktop user who was first.  We need at least 3 to 4 remote desktop both users to be connected.  Please advice

  Hi BHARATISRANI,

  Thanks for posting in the Microsoft Community.

  Since you are using Windows Server 2012 Essentials, the question you posted would be better suited for COMPUTING public Pro on TechNet. I would recommend posting your query in the TechNet Forums to get help:

  Windows Server 2012 Essentials General TechNet Forums

• Should what app I use to connect my ACER Iconia 8 tablet wireless to my Samsung TV compatible dongle?

  How can I move apps on my ACER Iconia Tablet 8 from the internal memory to the external micro-SD card installed?   Also, can what app I use to connect wireless to my Samsung TV with a dongle on this subject?

  official app from Samsung?

  https://play.Google.com/store/apps/details?ID=com.Samsung.companion

  on applications on SD card, applications of the system (the default application installed) can be moved; downloaded application can be moved if they have options.

  settings/applications

  Locate the application that you want to move, press and select move to SD card

  Note that this move (if possible) a part of the application, most of the files will remain in the internal memory.

• Unable to use the connection to connect to broadband, help?

  I have Windows XP Service pack 2

  I turned my computer off one day and he said he would do some downloads. When I turned it back on it would not connect to the Internet. When I go to start Control Panel network connection, create a new connection, then the wizard turns on. I chose Connect on the following Internet my connection manually set and it gives me three choices

  Connection using dial-up modem that is grayed out

  Conncting a broadband connection which requires a username and password which is gray

  and it's the one I use!

  Connect using a connection Strip which is always in. It's the only one that can be cliccked and it does not work.

  Can someone tell me how to recover one using the ID and password?

  I can not connect from my computer at home at all. I use the work one, so I can't download from the Internet but if I could put it on a flash drive that would work.

  Thank you!

  BCRingler

  Hello

  Follow these steps and check if that helps:

  Method 1:

  Start the computer in safe mode with network and check if the same problem occurs:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:

  I suggest you try to perform the clean boot and check if it helps:

  http://support.Microsoft.com/kb/310353

  NOTE: When you are finished troubleshooting, make sure that put you the computer in start mode normal as suggested article above.

  It will be useful.

• Want to go wireless to use another connection by the web

  I have a windows xp home 2002 128 adding ram series megabits and used to go wireless to use another connection. I have a linksys router e1ooo, a con of bus. E1000 network adapter and and on the installation disc insersion, it said to go to windows update.com and download windows xp service pack 3, how can I daod load whan I.m cannot get online. If I was online in the first place, I wouldn't need to go wireless! Well Duh! Help me if you can! Gary B.

  I have a windows xp home 2002 128 adding ram series megabits and used to go wireless to use another connection. I have a linksys router e1ooo, a con of bus. E1000 network adapter and and on the installation disc insersion, it said to go to windows update.com and download windows xp service pack 3, how can I daod load whan I.m cannot get online. If I was online in the first place, I wouldn't need to go wireless! Well Duh! Help me if you can! Gary B.

  Can get you wired online? If yes go to update.microsoft.com. It will scan your computer, download and run updates.

  If this does not work, contact

  • United States: (800) 360-7561, from Monday to Friday from 05:00 to 19:00 Pacific time.

  These additional pieces and can provide you with a Service Pack disk if it is still available.

• Closing removes all the saved passwords used to connect automatically to YouTube and Hotmail

  Moose title: stop, my sign plunges of Hotmail and You Tube, never used to give up sign ins?

  Locking computer removes all sign ins.

  Never used to do this. As always, I clicked on

  Stay connected Hot Mail and you Tube.

  How can I fix this.

  Nuts will sign in everything what it after shut down.

  Hello

  1. what browser do you use to connect to Web sites?

  2 when was the last time it was working fine?

  3. This only happens for this website or any websites?

  4 did you last modified the software on the computer?

  I suggest you to go through the steps mentioned in the link and the Coachman.

  Store passwords for automatic logon

  http://Windows.Microsoft.com/en-us/Windows-Vista/store-passwords-for-automatic-logon

  Fill in website forms and passwords automatically

  http://Windows.Microsoft.com/en-us/Windows-Vista/fill-in-website-forms-and-passwords-automatically

  I hope this helps.