became unusable
Since the last update.
I become BOMBARDED with error "permission denied to create wrappers of unknown class" for EACH UNIQUE SITE.
I give up.
back to Chrome.
This problem may be caused by an extension that is not working properly.
Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).
- Do NOT click on the reset button on the startup window Mode safe or make changes.
- https://support.Mozilla.org/KB/safe+mode
- https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
Tags: Firefox
Similar Questions
-
my disk dir. winxp home became unusable, how can I replace
my disk dir. winxp home became unusable, how can I replace
Hello
Check out the links and call to the number indicated in the article to order a replacement for Windows XP drive.How and when to contact Microsoft and support Customer Service
http://support.Microsoft.com/kb/295539Also.How to replace Microsoft software or hardware, order service packs and replace product manuals -
indexed columns became unusable. How do I solve it
Hi all
I truncated the data using alter command as follows.
ALTER partition of truncate table table_one (partitionname);
After I have tried to insert data into this table make me an error. And all index columns became unusable. I think do truncate the partition I'm facing this problem.
can anyone suggest me how to do it... usable.
I use tode
Thank you
Sree874823 wrote:
Hi allI truncated the data using alter command as follows.
ALTER partition of truncate table table_one (partitionname);
After I have tried to insert data into this table make me an error. And all index columns became unusable. I think do truncate the partition I'm facing this problem.
can anyone suggest me how to do it... usable.
I use todeThank you
Sreehttp://www.lmgtfy.com/?q=Oracle+rebuild+index
-
First Pro CC 2015.3 lags and freezes. Became unusable
I've just updated for first Pro CC 2015.3. Decision of the worst of my life.
It became totally unusable.
Whenever I have do the following with any clip (video, image, import AE):
- Select one or more clips/sequences in the timeline panel
- Click on the tab 'effects control '.
- Open a sequence
- Drag an effect on one of the sequences
First pro gel, the loading of Windows 7 blue circle appears and remains frozen for almost a minute. I took me a half hour to apply an effect to 6 staples.
I arrive with any file video/image/AE comp, with any type of effect (body default effect or third-party plugin it does not matter).
MY SPECS:
Windows 7 original
Original Adobe CC and PAID
Intel I7 - 3930K, 32 GB of RAM, GPU GTX970.
The operating system that is installed on a 512 GB SSD, project on two 1 TB SSD in RAID 0.
With this configuration, I worked for 4 years and it has always worked like charm.
What can I do to fix this?
Why is it that is happening all the?
Turns out it was a compatibility problem with Colorista 2. I upgraded the plugin to 3 Colorista and now works.
-
iMac became very slow and unresponsive
Hello
I have an iMac which, in the last two days, suddenly became unusably slow. Almost every click brings up the spinning beachball even just after a reboot. iTunes cannot play a melody without pausing every minute or two. Same Safari is really slow, so I have still not tried more demanding such as Lightroom.
Its an iMac mid 2010, 8 GB RAM, 1 TB HD with 305 GB free. Im running El captain, 10.11.6
Any ideas what could be causing this or what I could do to remedy the situation? IM thinking I have to go through the pain of wiping the hard drive and reinstall everything. But I'd really rather avoid because I was planning on getting a new iMac when they release then them and I don't want to go through all that process again.
I hope someone has an idea of something I could try before doing this?
Thank you.
Andy
Try to run this program, copy and paste the result in a response. The program was created by Etresoft, a regular contributor. Use please copy and paste the screenshots can be difficult to read. On the screen with the Options, please open Options and tick the boxes in the bottom 2 before the race. Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste into a response. This will show what is running on your computer. No personal information is shown.
-
My Satellite M305-S4910 is unusable because of the screen flashes
After owning since February 2009 it my laptop Toshiba became unusable! The screen flickers and goes to white constantly. Technical support or customer relations offers any assistance whatsoever!
Some would say that is under warranty and it is for this purpose, my problem. Fair enough until do you a Google search on the screen for Toshiba laptop problems... 4 200 000 visits. Or try Googling Toshiba laptop screen is flashing... 27 000 visits.
Customer relations officer informed me that Toshiba has no trace of problems in THEIR screen SYSTEM so there is nothing they could do.
I submit that they know exactly what the problem is, but are hidden behind a 1 year warranty and in my opinion they knowingly sell a defective product.
I'll NEVER, NEVER buy a Toshiba again any product! I feel that I've been ripped off and offered no help at all.
Hello
> Some will say she is more under warranty and it is for this purpose, my problem. Fair enough until do you a Google search on the screen for Toshiba laptop problems... 4 200 000 visits. Or try Googling Toshiba laptop screen is flashing... 27 000 visits.
Goggle for other manufacturers of portable devices such as Dell, HP etc.
I had 9.790.000 hits!
So everything initially using google, and to compare the results and the success is simply absurd because there are other factors that affect these resultsBack to your question;
> After he possess since February 2009, my laptop Toshiba became unusable! The screen flickers and goes to white constantly. Technical support or customer relations offers any assistance whatsoever!ASP from Toshiba still help if your hardware began to malfunction.
You will find here all the FSA world wide:
http://EU.computers.Toshiba-Europe.com-> supported downloads &-> find an authorized service providerIf the warranty is valid, all would have been covered by the warranty.
If you warranty is no longer valid, you will need to pay for the fix.
This is nothing unusual, and it is the custom. All manufacturers (computer/laptop, not only) doIn addition, the standard one year warranty can be extended. I recorded my Toshiba laptop on page and had extra year free warranty!
Of course you can also buy additional coverage that extends the warranty to 3 or 4 years
I did something like that for my PS3...Sorry mate but I put t in agreement with you, you are disappointed because your laptop start to malfunction
I understand that and I would be disappointed, but it's simply no chance that some of the material can always start malfunctioningPS: I got a computer laptop another manufacturer, he died after 1.5 years that I went to Toshiba U400 and A500. Now I have 2 Toshiba laptops at home I m very happy with these notebooks.
-
Mid-2013 13 "Macbook Pro unusable slow, beachballing"
I would appreciate if anyone could help out... my mid-2013 13 "Macbook Pro became unusable. It is slow to start, slow down open apps, slow to react and the spinning beachball at any time, there is an action of the user.
I can't attach the degradation to something specific, that I expanded my RAM several months to 16 GB, with no observable effect. Disk utility reports no problem and Apple diagnostics at startup fail to finish, I tried the basic and extended versions and they crash after about 90% completed, I can with the power button.
I ran be-Check:
EtreCheck version: 2.9.3 (253)
Report generated 2016-02-10 23:55:16
Download http://etrecheck.com EtreCheck
Duration 91:33
Performance: poor
Could not complete the following internal tasks:
/ usr/sbin/system_profiler - xml SPHardwareDataType
/ usr/sbin/system_profiler - xml SPSoftwareDataType
/ usr/sbin/system_profiler - xml SPLogsDataType
/ usr/sbin/system_profiler - xml SPApplicationsDataType
/ usr/sbin/system_profiler - xml SPDisplaysDataType
/ usr/sbin/system_profiler - xml SPUSBDataType
/ usr/sbin/system_profiler - xml SPThunderboltDataType
/ usr/sbin/system_profiler - xml SPExtensionsDataType
/ usr/System/Library/Extensions iname - *.kext
/ usr/Library/Application Support iname - *.kext
/ usr/bin/osascript tell application "system events" e to get the properties of each connection element
Problem: Beachballing
Description:
too slooooow
Disc information:
ST500LM012 disk HARD APPLE disk0: (500,11 GB) (rotation)
EFI (disk0s1)
: 210 MB Macintosh HD (disk0s2) /: 499,25 go-go (155,55 free)
HD (disk0s3)
[recovery] recovery: 650 MB MATSHITADVD-R UJ - 8À8)
Unknown files:
/ Library/LaunchDaemons/com. Eltima.ElmediaPlayer.daemon.plist
/ Library/LaunchDaemons/com. Nextel.DHCP.plist
~/Library/LaunchAgents/com. Nokia.NokiaSoftwareUpdaterAgent.plist
3 unknown files found. [Check files]
Kernel extensions:
/ Library/Extensions
[loading] com.sophos.kext.sav (9.4.50 - 10.9 SDK) [Support]
[loading] com.sophos.nke.swi (9.4.50 - 10.9 SDK) [Support]
Startup items:
ChmodBPF: Path: / Library/StartupItems/ChmodBPF
HWNetMgr: Path: / Library/StartupItems/HWNetMgr
Startup items are obsolete in OS X Yosemite
Launch system officers:
[failure] com.apple.SafariCloudHistoryPushAgent.plist [details]
[failure] com.apple.cloudphotosd.plist [details]
[failure] com.apple.security.keychain - circle - notification.plist
[loading] 160 tasks Apple
[operation] 73 tasks Apple
Demons of launch system:
com.Apple.csrutil.report.plist [failure]
[loading] 196 tasks Apple
[operation] 91 tasks Apple
Launch of Agents:
[loading] com.adobe.AAM.Updater - 1.0.plist [Support]
com.DivX.DMS.agent.plist [loading] [Support]
com.DivX.update.agent.plist [loading] [Support]
com.Google.keystone.agent.plist [loading] [Support]
[loading] com.oracle.java.Java - Updater.plist [Support]
[ongoing] com.Sophos.uiserver.plist [Support]
Launch the demons:
[loading] com.adobe.SC.FPFeedbackService - 1.0.plist [Support]
com.Adobe.fpsaud.plist [failure] [Support]
[ongoing] com.eltima.ElmediaPlayer.daemon.plist [Support]
com.Google.keystone.daemon.plist [loading] [Support]
com.Nextel.DHCP.plist [loading] [Support]
[loading] com.oracle.java.Helper - Tool.plist [Support]
com.oracle.java.JavaUpdateHelper.plist [loading] [Support]
[ongoing] com.Sophos.common.ServiceManager.plist [Support]
User Agents to launch:
com [loading]. BlueStacks.AppPlayer.LogRotator.plist [Support]
com [loading]. BlueStacks.AppPlayer.Service.plist [Support]
com [loading]. BlueStacks.AppPlayer.UninstallAgent.plist [Support]
com [loading]. BlueStacks.AppPlayer.UpdaterAgent.plist [Support]
[failure] com.apple.SafariBookmarksSyncer.plist [details]
com.citrixonline.GoToMeeting.G2MUpdate.plist [loading] [Support]
[failure] com.facebook.videochat. .plist [deleted item] [Support]
com.nokia.NokiaSoftwareUpdaterAgent.plist [loading] [Support]
User Login items:
None
Other applications:
com [running]. BlueStacks.AppPlayer.Agent.99872
[ongoing] com.etresoft.EtreCheck.1952
[ongoing] com.Sophos.AutoUpdate
[ongoing] com.Sophos.Configuration
[ongoing] com.Sophos.InterCheck
[operation] com.sophos.macendpoint.Sophos - Anti - Virus. 85152
[ongoing] com.Sophos.notification
[ongoing] com.Sophos.scan
[ongoing] com.Sophos.sxld
com.Sophos.webd [failure]
[ongoing] com.vmware.fusionStartMenu.100192
Internet Plug-ins:
Flip4Mac WMV Plugin: Version: 2.2.3.7 [Support]
FlashPlayer - 10.6: Version: 20.0.0.235 - 10.6 SDK [Support]
QuickTime Plugin: Version: 7.7.3
DivX Web Player: Version: 3.4.1.14 - SDK 10.10 [Support]
Flash Player: Version: 20.0.0.235 - SDK 10.6 obsolete! Update
Default browser: Version: 601 - SDK 10.11
JavaAppletPlugin: Version: update version 51 check Java 8
OVSHelper: Version: 1.1 [Support]
Web of Google Earth plugin: Version: 7.0 [Support]
Silverlight: Version: 5.1.30514.0 - 10.6 SDK [Support]
iPhotoPhotocast: Version: 7.0
The internet user Plug-ins:
Kkkkk Install detector: Version: 0.3.6 - SDK 10.7 [Support]
WebEx: Version: 1.0 [Support]
CitrixOnlineWebDeploymentPlugin: Version: 1.0.105 [Support]
F5 Inspection host Plugin: Version: 2008.01.16.11
Picasa: Version: 1.0 [Support]
WebEx64: Version: 1.0 - 10.6 SDK [Support]
Time Machine:
Information of Time Machine requires OS X 10.8 "Mountain Lion" or later.
Top of page process of CPU:
6% WindowServer
kernel_task 2%
2% EscrowSecurityAlert
PS 2%
1% uHD-UninstallAgent
Top of the process of memory:
615 MB kernel_task
0b cloudpaird
0b softwareupdated
0b askpermissiond
0b secinitd (2)
Virtual memory information:
0b free RAM
B RAM used (2.34 GB being cached) 0
Used Swap 0 B
When you see a beachball cursor or the slowness is particularly bad, note the exact time: hour, minute, second.
These must be run as administrator. If you have only one user account, you are the administrator.
Run the Console application in one of the following ways:
☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).
☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be all Messages. If it isn't, select
SYSTEM LOG QUERIES ▹ all Messages
in the list of logs on the left. If you don't see this list, select
List of newspapers seen ▹ display
in the menu at the top of the screen bar.
Each message in the journal begins with the date and time when it was entered. Highlight date back to the time you noted above.
Select the messages entered since then until the end of the episode, or until they begin to repeat, whichever comes first.
Copy messages to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.
The journal contains a large amount of information, almost all this is useless to solve any particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.
Please don't dump blindly thousands of lines in the journal in this discussion.
Please do not post screenshots of log messages - text poster.
Some private information, such as your name, may appear in the log. Anonymize before posting.
When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.
If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.
-
Update Windows 10 anniversary makes unusable touchpad
Hello
Two weeks ago I bought the Acer Aspire E5 - 575 G-53VG. Everything worked well.
After you install the update on the birthday, touchpad (ELANTECH) became unusable. It lags behind and the movement is a bit slow. When I put the touchpad setting in the ADVANCED BIOS to BASIC, no problem. But then the gestures do not work. I have also found that if the processor is supported, touchpad works normally. I think it's because of drivers. I did a clean install of Windows, installed all the drivers from the support page, windows update, and does not (only BASIC mode, but I lost the functionality).I noticed that other people have this problem too. We should spread the word, so Acer finally updates the drivers and/or BIOS.
I had the same problem as you guys with my newly bougth Acer Aspire S5 - 371 and I fixed my problem with the following steps:
1. install the latest drivers Elantech
2. install the latest drivers of e/s
3. the disabled option in bios advanced I2c
4 update Elantech drivers from windows update
5 activated Elantech in "mouse and pad touch setting", the advanced settings. (If it does not appear or you can not activate it, try to restart)
6 reboot
Now, under the "mice and other pointing devices" in Device Manager, it appears as input momentum instead of filtration momentum I2c device device. I hope this works for you guys to! It took me three days to fix this... Do not understand why we get no help from Acer.
-
External hard drive in the process of disappearance
I use a Synology hard drive for storing music. Until recently, it was linked to an ethernet cable to an Airport Extreme, which then connected to a Mac Mini which I use as a player. After that a closed power Synology became unusable/invisible when it is connected to the Airport (and the hard LAN is not lit). But when I connect it directly to an ethernet circuit (set up to extend a network established by another airport functioning as a router) the external drive becomes visible. The problem with this is that the transfer speeds are much slower (although not quite slow to affect the sound quality) and iTunes must have the file for each song is identified and selected individually in order to play.
Any suggestions on how to make recognizable tough with a direct connection to the airport? The glitch is more likely to be at the airport or the Synology disk?
When I saw the title I was sure that this would be another problem of USB hard drive... We don't have a lot of problems with Synology, which are excellent products by hand.
I would say that your test procedure indicates the problem with Airport Extreme. Since the Synology works when plugged into another device on the network.
The witness of not on network indicates a problem of basic connectivity. I suspect that stop feeding has corrupted the configuration of EI... It's weird, but it happens.
My recommendation is just factory reset of the AE and start with a new clean configuration.
If you are using a very old AE... so let me add a few questions...
Æ must be connected by ethernet to the rest of the network. And then in Bridge mode and create a wireless network... does not extend...
Or to extend a wireless network (from another router from Apple) and no ethernet on its wan port.
You should not use join a wireless network. This option is not yet available in Airport utility later to the extreme... but it is always possible to get messed up with previous utility.
I will also say that old AE may fail on the ethernet ports. What model exactly is EI? If it's more than say 5 years, it is time to update without worry.
-
Several problems of opening, reading and writing in Thunderbird
Anyone can help:
Since August 17, put to the point my installation of office of Thunderbird has several shortcomings, namely:
I'm not able to view my Inbox (or any folder) without opening it in a new tab;
I'm unable to write new e-mail messages;
I am unable to isolate emails unread;
Thunderbird does not open a bar of tasks or office, but runs according to the Task Manager, from where I have completed the application in order to start again. He responds very slowly;
I can't access ALL tasks on the Menu.I am running Windows 8.1.
I registered my profile and restored to a new installation of Thunderbird, without success.
Any help would be greatly appreciated as T - bid became unusable in this State.
Thank you very much
HS
To diagnose problems with Thunderbird, try the following:
- Restart Thunderbird with disabled modules (Thunderbird Safe Mode). On the Help menu, click "restart with disabled modules. If Thunderbird works as usual, there is an add-on or theme interfere with normal operations. You will need to reactivate the modules one at a time until you locate the offender.
- Restart the operating system in safe mode with network. This loads only the basics needed to start your computer while allowing Internet access. Click on your operating system for instructions on how to start in safe mode: Windows 8, Windows 7, Windows Vista, Windows XP, OSX
- If the safe mode for the operating system to resolve the problem, there are other software on your computer that is causing problems. The possibilities include but not limited to: AV scanning, virus/malware, background downloads such as updates of the program.
-
38 Firefox slow to respond or crashes without other options?
After the latest Firefox 38.0.1, it became unusable. I tried several different suggestions found on the forum and through Google searches, but noting seems to cure my problem.
I use MSN as my home page and at first thought it was the root cause, but using IE I don't have the issue of the suspension. I tried the resettlement, refreshing, new profile creation, to update all the drivers of video material and others etc. but can't seem to find the key...
The only thing that seems to relieve symptoms is to use the "noscript" and "adblock more ' Add-ons.
I added information from troubleshooting below.
For any help or suggestion is appreciated.
The application databases
Name: Firefox
Version: 38.0.1
Build ID: 20150513174244
Update channel: output
User Agent: Mozilla/5.0 (Windows NT 6.1; WOW64; RV:38.0) Gecko/20100101 Firefox/38.0
Windows multiprocessing: 0/1 (default: false)Reports of incidents for the last 3 days
Report ID: bp-9544f9b6-5e25-4c62-956e-93d262150527
Sent: 1 day agoAll Crash reports
Extensions
Name: Adblock more
Version: version 2.6.9
Enabled: true
ID: {d10d0bf8-f5b5-c8b4-a8b2-2b9879e08c5d}Name: NoScript
Version: 2.6.9.25.1 - signed
Enabled: true
ID: {73a6fe31-595d-460b-a920-fcc0f8843232}Name: Adobe Acrobat - create a PDF file
Version: 1.2
Enabled: false
ID: [email protected]Graphics
Description of the adapter: Intel(r) HD Graphics 4000
Adapter (GPU #2) Description: NVIDIA NVS 5200 M
Drivers: igdumd64 igd10umd64 igd10umd64 igdumd32 igd10umd32 igd10umd32
Drivers (GPU #2): nvd3dumx, nvwgf2umx, nvwgf2umx, nvd3dum, nvwgf2um, nvwgf2um
RAM card: unknown
Card (GPU #2) RAM: 1024
ClearType settings: D [Gamma: Structure of 2200 pixels: ClearType R level: 100 improved contrast: 50] D [Gamma: 2200 Pixel Structure: ClearType B level: 100 improved contrast: 50]
Device ID: 0 x 0166
Device ID (GPU #2): 0x0dfc
DirectWrite Enabled: false (6.2.9200.17292)
Driver date: 20/03/2014
Driver (GPU #2) date: 26/04/2015
Driver version: 9.17.10.3517
(GPU #2) driver version: 9.18.13.4807
GPU #2 Active: false
GPU accelerated Windows: 0/1 Basic (OMTC)
SubSys ID: 05351028
SubSys ID (GPU #2): 15351028
Vendor ID: 0 x 8086
Vendor (GPU #2) ID: 0x10de
WebGL Renderer: Google Inc. - ANGLE (Intel(r) HD Graphics 4000 Direct3D11 vs_5_0 ps_5_0)
windowLayerManagerRemote: true
AzureCanvasBackend: skiing
AzureContentBackend: Cairo
AzureFallbackCanvasBackend: Cairo
AzureSkiaAccelerated: 0Important change preferences
Browser.cache.Disk.Capacity: 358400
Browser.cache.Disk.smart_size.first_run: false
Browser.cache.Disk.smart_size.use_old_max: false
Browser.cache.frecency_experiment: 4
browser.download.importedFromSqlite: true
browser.places.smartBookmarksVersion: 7
browser.sessionstore.upgradeBackup.latestBuildID: 20150513174244
Browser.Startup.homepage: http://www.msn.com/
Browser.Startup.homepage_override.buildid: 20150513174244
Browser.Startup.homepage_override.mstone: 38.0.1
dom.mozApps.used: true
extensions.lastAppVersion: 38.0.1
GFX. Direct2D.disabled: true
GFX. Direct3D.last_used_feature_level_idx: 0
layers. Acceleration.Disabled: true
Media.GMP - th - adobe.lastUpdate: 1432767155
Media.GMP - th - adobe.version: 9
Media.GMP - gmpopenh264.lastUpdate: 1432767155
Media.GMP - gmpopenh264.version: 1.4
Media.GMP - manager .buildID: 20150513174244
Media.GMP - manager .lastCheck: 1432767154
network.cookie.prefsMigrated: true
Network.Predictor.cleaned - up: true
places.database.lastMaintenance: 1432842131
places. History.expiration.transient_current_max_pages: 104858
plugin.disable_full_page_plugin_for_types: application/pdf
plugin.importedState: true
privacy.sanitize.migrateFx3Prefs: true
Storage.vacuum.Last.index: 0
Storage.vacuum.Last.places.sqlite: 1432830759Important preferences locked
JavaScript
Incremental GC: true
Accessibility
Enabled: false
Prevent accessibility: 0Versions of the library
NSPR
The expected minimum version: 4.10.8
Version: 4.10.8NSS
The expected minimum version: 3.18.1 based ECC
Version: 3.18.1 based ECCNSSSMIME
The expected minimum version: 3.18.1 based ECC
Version: 3.18.1 based ECCNSSSSL
The expected minimum version: 3.18.1 based ECC
Version: 3.18.1 based ECCNSSUTIL
The expected minimum version: 3.18.1
Version: 3.18.1Experimental features
These programs were reported in the accident report;
sysfer.dll = Symantec CMC Firewall
IPSEng32.dll = Symantec's Intrusion detection
IPSLdr32.dll = Symantec's Intrusion detection
Total virtual memory 4294836224
Available virtual memory 3668897792
System memory usage percentage 66
Available swap file 11060457472
Available physical memory 2870013952
Download programs current full installation for your Norton programs and keep them.
Download and run the Norton removal tool to uninstall your Norton product
After restarting the computer, use a registry scanner. Then, run the installation programs.
https://support.Mozilla.org/en-us/KB/Firefox-slow-how-make-it-faster
https://support.Mozilla.org/en-us/KB/Firefox-uses-too-many-CPU-resources-how-fix
-
Bluetooth does not work with the hands-free after iOS 9.3.1 on 6s
Question so that evacuation here... Hello apple, invite you me several times to upgrade to the latest version of the software and I finally do after two weeks of incessant pop ups and now my phone became unusable with connection handsfree on three high-end cars (both brands of cars from 2007, 2010 and 2015 ", which confirms that it is a matter of apple). I have a 6 s and have just updated to 9.3.1. Before the update, everything was fine now, I have constant clipping making it impossible to use. This means that I can not make calls hands free which is obviously a problem in relation to the laws of conduct. I'm trying to get by using a headset or speaker of the iPhone, but it's bad news. Note people are ranting on this matter in all directions. Do you have a recommendation?
You talk to Apple by posting on this forum, only users such as you. Please provide your feedback directly to Apple at this link: http://apple.com/feedback
-
Enter key no longer works in the address bar after updating FF
After the update of the Enter key no longer works. When I type the url directly, nor when I select in the history.
In short, FF became unusable. Now I need to install and use a less crappy browser. Update extremely sloppy, amateuristic.To Activate enter key for Web sites in the url/address bar Disable AVG Safe Searchbar, see: pressing on enter in the address bar does not work
Thank you
Please check 'Resolved' the answer really solve the problem, to help others with a similar problem.
-
Slow performance HP Pavilion laptop problems
Very recently, I bought a laptop HP Pavilion. It has Windows 8 and arrived in the mail, no more than a week ago. The first thing I did after that the mandatory installation process was to restore the files from my old laptop (which broke) via ClickFree (currently I have 625 677 GB free) and once that was completed, I installed several programs (office, Vipre, Photoshop, etc.). Apart from that, I did very little about the real hard disk of the computer, since I save everything externally on my ClickFree.
My problems started occurring rather suddenly, Wednesday morning. In Firefox, I opened a tab for go on Facebook, and scroll the RSS seemed pretty gloomy. I closed the tab, but the slow pace continued in the other tabs, I had opened and then spread to the programs not involving is not the Internet. These problems have worsened gradually.
On the Internet, the performance is particularly slow. I gave up video players like Netflix, because they freeze the browser to the point of crashing. Page loading is very delayed, even typing this message experiences freeze, despite the fact that I have nothing else running in the browser. There is warning of frequent messages in scripts and plugins does not (although, ironically, these messages are often unresponsive until I finish the script or the offending plugin). It is difficult to do anything on the Internet, such as the loading of pages and tabs of switching may take several minutes. Just clicking can cause the browser to freeze for minutes at a time.
Off the Internet, programs load extremely slowly, often freezing. Opening files sometimes, with an increase in frequency, translates into a green loading bar at the top of the screen. Sometimes this bar gets stuck and cannot finish, and I can't access the contents of the file; This happened when I tried to open the Panel, to get more specific information about the computer to include in this message. Sometimes programs, such as video players, open without actually playing the video file, or they open at all. Often these programs freeze and sometimes hang; the desktop and the Explorer bar at the bottom of the screen (with the start menu, etc.) are not likely to freeze or disappear, for varying degrees of time. When I came to the computer, CPU utilization averaged about 4-6%, but now he's averaging 40 to 60%.
Start the computer became too long and hard. The last time that I restarted, I entered my password only to get a completely black screen for at least half an hour; My office and the icons have appeared when I pressed Ctrl-alt-delete. After that, I stopped to turn off the computer (it was not a long time ago). This morning, I opened the laptop to connect, but received only a "Please wait" while the computer has tried to load the login page. It took 10-15 minutes, and then I was finally able to enter my password.
These issues are getting worse, and I'm sure I'm forgetting several, but I think that what I've included enough to illustrate my problem. This is a new laptop, but it works almost as bad as my old laptop, which became unusable recently and had to be replaced with this one. I can't imagine what is the cause, but I really wish she was fixed. I installed a program called Fix - It Utilities (the installation disk supplied with the notebook) to try to improve the performance of the laptop, but to no avail. Any help would be greatly appreciated.
Hello ValentineKills. I understand that the computer is slow. I will do my best to help you!
This can be caused by a hardware failure or a software/driver/virus conflict. However, we won't know until the diagnosis is made.
I'll provide a few official documents that provide information on how to speed up the computer. I want that you follow all the steps in all documents. In this way, if the problem exists, it will restrict the root cause. Here are the documents that I want you to try:
http://support.Microsoft.com/kb/2746761
http://support.HP.com/us-en/document/c03460887
Since you're under Windows 8, I have a further suggestion: complete all updates to Windows, and then upgrade the computer to Windows 8.1. While the operating system is upgraded, try to use the computer and see if the speed is any different.
Please reply when you have finished troubleshooting. I'm only here to help!
Mario
-
I was running firefox on your desktop. The hard drive became unusable as the main drive, either because of a software installation which has left the operating system unstable or malicious software or both. The hard drive has been cleaned of malware, but has been replaced by a new hard disk that has a new installation of firefox. Operating has been and is Windows XP. The old hard disk which is now F:\ is still in the computer. There are lots and lots of bookmarks on F; \... Firefox I need to import the Firefox on C:\. In my opinion, these are the .json files. Can I copy and paste or import bookmarks?
See:
Maybe you are looking for
-
How to save all tabs of a session, to open again for the last time
Can someone help me please the question above? I look forward to the responses, thank you. Chris
-
Client Windows Update not found with error 0 x 80070490
Since December 18, 2010 windows update fails on my DellLatitudeD630 under Vista ULTIMATE SP2.Tried many methods suggested on various web sites:Installation via the Vista DVD update: result: update greyed... no upgrade needed Services related to Windo
-
HP Pavilion g6-2226tu, 8 - Windows x 64 operating system, Windows Update crashes
I've updated to my machine using windows update I get daily updates of windows defender from microsoft, which I'm updating regularly basically according to me, they are definition updates yesterday, I also got an update of the same thing that was abo
-
I use a updated the "TCP Communicator - active" in examples of Labview to communicate with an Ethernet device. Works fine but I want to use it as a Sub Vi since it will be a much larger part of a system. This is where my problem is. Chain control is
-
Diagnostic report (1.9.0027.0): ----------------------------------------- Validation of Windows data--> Validation status: invalid license Validation code: 50 Validation caching Code online: n/a, hr = 0xc004f012 Windows product key: *-* - 4JJQP - TP6