Before the update

Similar Questions

• AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  AirPlay does not work on Apple TV with ios 10.  It was working before the update.  Please notify.

  Try these steps, check to see if things work after each step if necessary, before you try the next.

  1. Check AirPlay is on the Apple TV (turn market if it already is)
  2. Check that both devices are on the same network (settings > Wifi on the mobile device and the settings > general > network, on the Apple TV).
  3. Restart the Apple TV (settings > general > restart).
  4. Restart the Apple TV by removing ALL cables for 30 seconds.
  5. Restart your router. (Also try to remove the power cord for at least 30 seconds)
  6. Restart your computer or mobile device.

  If you're still having problems, try to use 802.11n for wifi if you currently use 802. 11B or 802. 11 g.

  If your problem is AirPlaying starting a computer, try turning off bluetooth

  If you're still having problems, the following article can help you.

  Troubleshooting AirPlay

  Troubleshooting connections and Wi - Fi networks

  Recommended Wi - Fi settings

  WiFi Diagnostic Software (for Mac users)

  You will also find help on this page, where I have collected some of the more unusual solutions for network problems.

• Firefox, now sucks but was great before the update.

  Ok...
  I updated Firefox a few days ago and now everything is slow, suspended and notchy & a bit of sucking. There is no problem whatsoever before the update. I want to go back. I don't want to spend 6 hours to try this and and the other thing. Just zap the 'upgrade' and take me back so that I can work on all the other BS "updates" from other sites such as the FU * ING IDIOTS to Yahoo that has made my email life a nightmare.
  I'm sorry. I love Firefox, but this is bad. And I give you a few generous THUMBS UP for having this opportunity to communicate my grievances, unlike much other BS, like Yahoo services. You deserve a reward for service or something. You have email?
  Cheers, etc..

  This occurred ranging from 38.0.5 to 39.0.3, that would be an update of the main version, or 39.0 at 39.0.3, which was a unique security solution?

  If this problem occurred since the security fix, maybe some program files were damaged. To address this problem, the following is pretty fast:

  Clean reinstall it

  We use this name, but it isn't about deleting your settings, this is to ensure that the program, files are clean (no incompatible or exotic code files). As described below, this process does not disrupt your existing settings. Don't uninstall NOT Firefox, that does not need.

  (1) download a fresh Installer for Firefox 39.0.3 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) close Firefox (if applicable).

  (3) to rename the existing Firefox program folder, either:

  (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (Windows 32-bit folder names)

  C:\Program Files\Mozilla Firefox
  

  TO

  C:\Program Files\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  When you start Firefox, is not better performance?

  Note: Some plugins can only exist in this OldFirefox file. If it is missing something essential, present in these files:

  • \OldFirefox\Plugins
  • \OldFirefox\browser\plugins

• What to do before the update of firefox to keep the previous bookmarks, untouchable preferences?

  You guys can provide instructions as X steps before the update of Firefox, in a clear way, not with a bunch of text, for the elderly like me to follow? I had nice Firefox and neat, LMDE updated and now it's like a cool program. I tried to recover my profile, but it did not work - had an error message.
  So, it would be nice to find an article (roughly what do before the upgrade) guiding the user to manage the profiles before update/upgrade.
  Please make these instructions available (easy mode) before the disaster occurs.
  Thank you very much.
  Sabim

  These modules can be a great help for the backup and restoration of Firefox

  FEBE (Firefox environment Backup Extension) {web link}
  FEBE you can quickly and easily backup your
  Extensions Firefox, history, passwords and more.
  Indeed, it is more than just backup - it will actually rebuild
  your saved individually into installable as files.
  It will also make backup of the files you choose.

  OPIE {web link}
  Import/export extension preferences

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• Why the Firefox 4 is not restore all the sessions that were open at the time? Before the update, I've been invited either ("SAVE AND QUIT") or even if she closed UNEXPECTEDLY (crushed), he AGAIN restored. New version does not offer "save and exit".

  Question
  Why don't Firefox4 restore any sessions that were open at the time? Before the update, I've been invited either ('SAVE AND QUIT'), or even if it closed UNEXPECTEDLY (crash etc) it STILL restored everything. New version does not offer "save and exit".

  Now, Firefox always stores the old session which you can access from the history menu by selecting "restore previous Session."

  If you always open the last set of tabs, another approach is the following:

  1. Click on the orange button Firefox, then select options to open the options window
  2. Go to the general Panel
  3. Change the setting "When Firefox starts" to "show my windows and tabs from last time '.

• Error message: they buy items on the iPhone "IPhone patches (2)" who have not been transferred to your iTunes library. You must transfer these items in your iTunes library before the update of this iPhone. Are you sure you want to continue

  When you try to download and install new updates of security for my iPhone 6 s, I get the following error Message:

  "They buy items on the iPhone"XYZ"which have not been transferred to your iTunes library. You must transfer these items in your iTunes library before the update of this iPhone. Are you sure you want to continue? »

  How do I 1) locate those particular items purchased? and (2) how to transfer them to my iTunes library?

  Click here and follow the instructions.

  (139952)

• Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Given that I have updated to IOS 9.2 my Ipad 2 Air is discharge the battery in 12 to 14 hours, even without any use. Before the update, after a day of average use of the battery was still 70-75%. How can I reinstall the IO 9.1?

  Hello

  The best way to save battery life is to go into the settings and turn off Apps Refresh

  I now get 3 / 4 hours of battery life more.

  You cannot return to a previous ios 9.1

  See you soon

  Brian

  PS

  If you still have a problem iCloud backup now

  Then restore settings to get rid of any bugs.

• have we not back up our data to an external device before the update to windows 8.1

  have we not back up our data to an external device before the update to windows 8.1.

  update to windows 8 8.1 will affect the data in the laptop...

  @swati90

  If you upgrade from the Microsoft Store, your applications, data office and personal will not be deleted.

  If you're updating with an ISO will always give you the opportunity to register personal files.

  Error on prudence, I like so I will say that it is not a bad idea to back up important data to an external drive before the upgrade.

• Vista Home Prem - problems since installation on 26 August updated - USB problems and everything deleted before the update restore points

  I have a Dell XPS 430 quad-processor. Receipt of the August 26 as update automatic updates. Since the computer was restarted after autoupdates, I have problems. Biggest problem is when I switch to another port my 4 ports KVM Trendnet TK - 407K and back on my Dell computer - the computer is blocked and the video is all garbled. My only recourse is to start the computer cold. After the first time it happened, I knew immediately updates, so I went in my restore points to restore back before the update. When I did restore bluescreened, but I was unable to capture data as computer restarted itself and get into the routine of starting fix. Difficulty of startup said it could not solve my problem.

  When I returned to restore to try to restore once again, I found that all my restore points have been removed. I found a utility called the shadow on the web Explorer and installed. He seems to find all my data restore point on the recovery D: drive, but Windows is not seeing them.  I should also mention, usb-wise, given that these updates have been applied, my Canon digital camera is not recognized when I hang it in one of the USB ports.

  Don't know what to do at this point. If I stay on the port on my computer using the KVM switch, my PC at home works well. Unfortunately, it is not realistic that I need to do my job in two laptops that are also connected to the switch.

  I'm tempted to just delete all the updates that have been installed on 8/26 to see if that helps - esp KB973879 I read on this patch causing a lot of problems with other computers.  Another thing that I have not tried is to use the restore from a command prompt application.

  Any suggestions would be greatly appreciated!

  Thank you!

  Hi brab61,

  Welcome to Microsoft Vista answers Forum!
   
  It is good to know that you're not faced problems with your computer.
   
  However, I suggest you go ahead and turn on Windows automatic updates to fix security vulnerabilities and it is beneficial for you to have these updates installed.
   
  Learn more about Windows Update, you can use the following link: -.
  http://www.Microsoft.com/Windows/downloads/windowsupdate/default.mspx
   
   
  You can run the System File Checker tool before you activate the automatic updates.
   
  To run the System File Checker tool, follow these steps:
  1. Click Start and type cmd in the box start the search.
  2 right click "cmd" in the list programs, and then click Run as administrator.
  3. you are asked to enter an administrator password or a confirmation, type your password or click on continue
  4. at the command prompt, type "sfc/scannow", and press ENTER.
   
  Note:- After that, you can now install an update both manually and check the update is causing the problem and let us know to help you and solve the problem.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212

  Hope this information is useful.
   
  Let me know if it worked.
  All the best!
   
  Thank you, and in what concerns:
  Divya R - Microsoft technical support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  I have Windows vista Ultimate edition. but he started asking for activation after the windows update while it has already been activated before the update.

  Hello, Pichon,

  If Windows Vista application unexpected activation

  On rare occasions, you may be prompted to activate Windows Vista on a computer that did not previously require Windows Vista activation or has already been activated successfully. For example, this may occur on a computer on which Windows Vista was preinstalled by an OEM installation or Volume licensing and are major hardware changes occurred, such as upgrading the hard disk and memory at the same time.

  If you are prompted to reactivate Windows Vista, you can do this by using the Windows Activation Wizard to:

  1. Click Start, and then click computer.
  2. Click System Properties on the toolbar, and then click click here to activate Windows now in the Windows activation area. If you are prompted for an administrator password or a confirmation, type the password, or click continue.
  3. Select the Windows Vista activation method that you want, and then follow the instructions.

  To avoid this problem in the future, obtain the latest service pack for your version of Windows Vista, either through automatic updates or direct download.

  To update to Windows Vista and prevent this activation problem does not happen:

  1. Click Start, click all programs, and then click Windows Update.
  2. Click find updates.
  3. As soon as Windows Vista found the updates, click the install updates button.

  How to activate Windows Vista

  http://support.Microsoft.com/kb/940315

  Activation fails when you try to activate Windows Vista, Windows 7, Windows Server 2008 or Windows Server 2008 R2 on the Internet

  http://support.Microsoft.com/kb/921471

• Why dllhost.exe crashes when trying to create thumbnails for video files 3D it was working before the update to Internet Explorer 10

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  I could view and manipulate all my files video 3D before the update to IE10, so I did a restore and all is well again.

  The problem IE10 was installed host.dll/substitution/thumbnail cache com would consume memory until it saturated my whole system and crashing.

  Updated platform for Windows 7 x 64-Edition (KB2670838)

  http://support.Microsoft.com/kb/2670838?WA=wsignin1.0%2cwsignin1.0

  This update of the platform also allows the emergence of the problem.

  Why does dllhost.exe Com surrogate consumes memory until the crash.

  This happens when I highlight or view a folder containing video files, even if I close the file or select another folder, that maintains the memory consuming.

  It seems to happen more often with the 3D video files, but it has done the same with the 2D files.

  It therefore seems to be a problem with the windows thumb nails system on these files.

  Besides trying to delete or move the file or folder, while the Com Surrogate consumes memory Delete cannot complete the task.

  What I did is to find by selecting delete file in question, then go to Task Manager stopping Com Surrogate, then deletes the file.

  OK guys and girls, here is the scoop or what I discovered.

  Went to paid Support MS started a ticket gave them the info of the problem.

  I backed up before you have to pay, but it will still leave a ticket on the system req.

  Them I did a searck masive on this problem and ran into this and I beleve it's true. It's the way they handled a similar problem in Vista.

  So here it is.

  "MS are aware of the problems with certain chipset / combinations ofdriver with the updated KB2670838.
  They also have problems with the installation of IE10

  They work on these two issues and will be updated as and when they are convinced that they have solved the problems.
  In the meantime, the recommendation is that if the update isn't the first phase of installation, make sure that it is uninstalled and then hide it - Windows Update will display it when it is updated. »

  To uninstall IE10 and KB2670838 update, should be fixed hide automatic update when your pop back up to be updated the problem.

  Evidence that MS knows that IE10 has problems on some hardware platforms is here.

  http://TechNet.Microsoft.com/en-us/IE/jj898509.aspx

  Hope this helps Every One.

• BEFORE the UPDATE of relaxation with time stamp does not work as expected

  We have a scenario where I check update operations on a table.

  I created a before update TRIGGER, so that every time he goes an update on the main table statement, one before the image of the lines is captured in the table of audit with timestamp.

  Since it is before updating, ideally the audit table timestamp (TRG_INS_TMST) should be less main table timestamp (IBMSNAP_LOGMARKER) VALUE, I mean TRIGGER should happen before the update.

  (I could understand in a way that the UPDATE statement is formulated with SYSTIMESTAMP earlier before the TRIGGER is evaluated and so UPDATE is to have a time stamp prior to TRIGGER, but this isn't what we wanted. We want PRIOR update)

  'Table' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM
  

  Here is my test case.

  DELETE FROM TEST_TRIGGER_1;
  
  DELETE FROM TEST_TRIGGER_2;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  INSERT INTO TEST_TRIGGER_1 (ID,ibm_snapoperation, ibm_snaplogmarker)
       VALUES (1, 'I', SYSTIMESTAMP);
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  
  UPDATE TEST_TRIGGER_1
     SET IBM_SNAPOPERATION = 'U', ibm_snaplogmarker = SYSTIMESTAMP;
  
  COMMIT;
  
  SELECT 'T1', ibm_snapoperation, ibm_snaplogmarker FROM TEST_TRIGGER_1
  UNION
  SELECT 'T2', ibm_snapoperation, TRG_INS_TMST FROM TEST_TRIGGER_2;
  

  Def trigger:

  CREATE OR REPLACE TRIGGER etl_dbo.TEST_TRIGGER_1_TRG BEFORE UPDATE OF IBM_SNAPOPERATION
  ON TEST_TRIGGER_1 REFERENCING OLD AS OLD NEW AS NEW
  FOR EACH ROW
  WHEN (
  NEW.IBM_SNAPOPERATION= 'U'
        )
  DECLARE
  V_SQLCODE  VARCHAR2(3000);
  --PRAGMA AUTONOMOUS_TRANSACTION;
  BEGIN
  INSERT INTO etl_dbo.TEST_TRIGGER_2
  (ID,
  IBM_SNAPOPERATION,
  IBM_SNAPLOGMARKER,
  TRG_INS_TMST
  )
  VALUES (:OLD.ID,:OLD.IBM_SNAPOPERATION,:OLD.IBM_SNAPLOGMARKER,SYSTIMESTAMP)
  ;
  --COMMIT;
  END;
  /
  

  Output is something like this

  1 row deleted.
  1 row deleted.
  no rows selected.
  1 row created.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   I                 13-OCT-15 03.07.00.927546 AM 
  1 row selected.
  1 row updated.
  Commit complete.
  
  'T1' IBM_SNAPOPERATION IBM_SNAPLOGMARKER            
  ---- ----------------- -------------------------------
  T1   U                 13-OCT-15 03.07.01.775236 AM   <<---------- This is the main table, This should have the latest timestamp
  T2   I                 13-OCT-15 03.07.01.775953 AM 
  
  2 rows selected.
  

  But for some reason, even after the creation of the 'AFTER' trigger for update, it works as expected. Sense - the main table is not having the last timestamp given

  It's OKAY - I told you in my reply earlier. Reread my answer.

  could understand somehow that the UPDATE statement is made with earlier

  SYSTIMESTAMP until the TRIGGER is assessed and updated so is to have

  time stamp prior to the trigger, but this isn't what we wanted. We want to

  BEFORE the update)

  As I told you before that your UPDATE statement occurs BEFORE the trigger is activated.

  Despite what the other speakers have said, it makes NO DIFFERENCE if you use a BEFORE UPDATE or an AFTER UPDATE trigger. Your UPDATE statement runs ALWAYS BEFORE the trigger.

  HE has TO - it's your update processing statement that causes the trigger to fire.

  Your update statement includes SYSTIMESTAMP. If during the processing of your return to update the value of SYSTIMESTAMP "at this exact time" is captured.

  Then your trigger is activated and starts to run. ANY reference to SYSTIMESTAMP that you use in your trigger cannot be earlier than the value of until the trigger was executed. It's IMPOSSIBLE.

  The trigger can use the SAME value by referencing: NEW and the column name you store the value. Or the trigger can get its own value that your code is doing.

  But the SYSTIMESTAMP value in the trigger will NEVER earlier than the value in your query.

  And none of these values can actually be used to tell when the changes are really ENGAGED since the trigger does not work and CAN NOT, to know when, or if, a validation occurs.

  Reread my first answer - he explains all this.

• Updated Photoshop CC and now it crashes.  How should I take this back to before the update?

  I spent 3 hours this afternoon trying to get help from the cat but nothing is fixed.  I have photoshop, lightroom, and bridge.  Updates to Lightroom and bridge agree. How can I reinstall the CC PS before the update?  My Macbook Pro is not able to manage it, maybe... being older video card.  I have a backup on my external hard drive, but it does not work correctly if I'm well obviously not doing it correctly. I'm not all that technical, but I can follow the exact instructions.

  My Office CC is not any 'previous Versions' of applications so I can't take it back to 2014 version.

  Please can someone help get this sorted out?  I would really appreciate it.

  Relocation of can be worth a try, Yes...

• I've just updated Adobe Professional, but I'm not able to add, to delete the pages more. Before the update, it wasn't a problem. I missed something?

  I've just updated Adobe Professional, but I'm not able to add, to delete the pages more. Before the update, it wasn't a problem. I missed something?

  Are you sure that you're not open your files with the free player instead of using Acrobat? And please do not post the same question multiple times. Also, try to be more specific. "I am not able" can mean many different things.

• BEFORE the UPDATE trigger between field in both tables

  Hi Oracle Experts,

  I'm a newbie in the triggers. I want to do a trigger that fires whenever changes are made to a table, updates a field in the second table. The details are as below:

   SAMPLE (
  SAMPLEID    NUMBER(10,0)
  ACTIVITYID     NUMBER(10,0)
  ACTIVITYTABLEID     VARCHAR2(20 BYTE)
  SAMPLEDT     DATE
  SAMPLEPTID     VARCHAR2(20 BYTE)
  SAMPLENOTIFY     VARCHAR(1 BYTE)
  )
  

  SAMPLE_RESULT(
  SAMPLEID     NUMBER(10,0)
  TESTID     VARCHAR2(20 BYTE)
  PROPERTYID     VARCHAR2(20 BYTE)
  TESTERID     VARCHAR2(20 BYTE)
  ENTRYDT     DATE
  RESULTNUM     NUMBER(18,8)
  RESULT     VARCHAR2(20 BYTE)
  RESULTTYPE     VARCHAR(1 BYTE)
  RESULTSTATUS     VARCHAR2(1 BYTE)
  )
  

  The idea of relaxation:

  CREATE OR REPLACE
  TRIGGER "DBA".AUTO_NOTIFY
  BEFORE UPDATE OF RESULT ON SAMPLE_RESULT
  FOR EACH ROW
  WHEN (NEW.PROPERTYID = 'Action Taken')
  BEGIN
  
  //my idea
  :new.sample.samplenotify = 'S'
  
  //but i don't know how to make a reference to another table
  
  END;
  

  The trigger will fire every time the propertyid is pronounced, it sets the value of samplenotify in the example in table for the of '.

  Is this possible?

  Thank you in advance.

  La: new.column_name syntax applies only to the table that the trigger is on.  You will need to use an update on the other table.

  CREATE OR REPLACE TRIGGER auto_notify

  BEFORE the UPDATE result WE sample_result

  FOR EACH LINE

  WHEN (NEW. PROPERTYID = "Taken Action")

  BEGIN

  Example of UPDATE

  SET s = samplenotify"

  WHERE sampleid =: NEW.sampleid;

  END auto_notify;

  /