before trigger with four cards PXI-6115

Similar Questions

• How can I use my PXI-6115 meter analog signal trigger to generate pulses of frequency

  I work on a PXI-6115 DAQ card and want to using the analog signal to trigger the counter it's generating frequency pulses. The manual says the analog trigger is supported, but I can't use an analog signal to trigger the start of work, in the test, I use the counter 0 to generate pulses and use the signal input port analog trigger PFI 0, can someone tell me what it is? My test VI. & error message appears in the attachment.

  Best regards

  If you read the error you can see digital triggers are the available trigger only when you use the output of the counter.

  You can work around this by setting up a dummy analog input task which will trigger an internal digital triggering when he sees the right analog trigger.

  See this thread for more details:

  http://forums.NI.com/T5/LabVIEW/DAQmx-start-trigger-analog-edge-VI-keeps-returning-error-200077/m-p/...

• Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?

  Would it not correct to say that the PCI-6110 can be set to 'redeclenchables' but the PXI-6115 module cannot use this property?  If Yes, where is it documented the series cards can do trigger?  For example, is it possible to configure the trigger on the PXI-6124?

  Hi Joel_Neptune,

  The PCI-6110 and other materials as the PXI-6115 S series and SMU-6124 do not natively support NOR-DAQmx analog input alarm. However, you can use one of the generalist counters/timers of the Council to generate a reenclenchees pulse train, then use this as the sample clock pulse train. This transportation example shows how:

  LabVIEW\examples\DAQmx\Synchronization\Multi-Function.llb\Multi-Function-Ctr Retrigg Pulse Train generation for the Clock.vi sample

  In addition, the new material of the simultaneous sampling X series are supported trigger analog input without using a separate task of counters/timers.

  Brad

• Simultaneous sampling using two cards PXI-6562

  Hi all

  I was wondering if it is possible to have two examples of cards PXI-6562 (e/s LVDS high flow) at the same time using the same trigger?

  Thanks in advance,

  Nathan

  Hello

  You can synchronize certainly several MSC devices, including modular instruments to NI HSDIO.  The most effective way to proceed is to use the NOR-TClk synchronization API.  It is provided with several of our drivers of modular instruments and devices, including NOR-HSDIO.  The first part of this knowledge base explains the use of the NOR-TClk functions for that.  This tutorial gives a very thorough introduction timing and synchronization using the API OR-TClk.

  If you are more concerned with programming in fact such a request, I would check the NOR example Finder for some good examples.  "" "" Navigate up to material input and output "modular instruments and devices" NOR-HSDIO "synchronization" to several features of dynamic Acquisition (TClk) .vi

  Jon S
  

• Install windows on mac pro (early 2008) in other SSDS with RAID card

  Guys, good evening to all the same time.

  I get out of this crazy short, I ask humbly help.

  I explain my problem:

  I have a Mac Pro (early 2008), with RAID CARD MEDIA

  He does not then I "gave" to my mother who must use windows for work.

  I'm out all 4 disks in RAID installed and mounted 2 - SSD OCZ Agility 256 GB.

  one of them is installed OSX Yosemite. on the other hand, I want to install WINDOWS.

  and here the problems begin:

  When I insert the win8.1 to proceed installation standard dvd (EFI not talked since the beginning of 2008), I get, when I have to decide on which disk to install and format windows, does not reveal the installed drives

  After 2 days of tweaking, I was able to understand that this is a problem due to the RAID card installed, I also read that you just remove it and connect the SSD in one of the two doors empty ODDsata (and not in the 4 planned the raid card slots)

  but still does not see the attached HDD / SSD, so keep trying and I think it's a driver problem and I need to install the AHCI driver, now, I'm pretty Nerd, but I still can't get.

  Someone could want explain step by step what I need to do to install this * win on MacPro 8.1 designed for RAID card?

  Thank you so much in advance.

  A welcome message

  Ruggero

  If you remove the card RAID Apple on the Mac, you MUST connect the iPass cable on its location on the motherboard, or all four bays are unusable:

  

  .

• This video card will fit with my card mother MS-7613 (Iona-GL8E)?

  Hello.

  I am looking to update my video card in my Pavilion elite HPE-431f desktop PC with this card:

  http://www.Newegg.com/product/product.aspx?item=N82E16814130910

  The dimensions are 9.5 "H slot card 4.37" 2. I'm worried about the bottom of the card to hit the heat sink:

  

  I think it will clear the RAM and the power connector 24 pin but looks like it might hit the heat sink, because it takes 2 slots.

  And before ask you, I improve my diet too for the card. I haven't ordered yet to the card and I did not really

  want the hassle of a return.

  Anyone can shed some light?

  Thank you.

  On condition that the heatsink you speak is not larger or only slightly as the PCIe x 16 slot, you should be fine.

  If you have any other questions, feel free to ask.

  Please click the White Star of KUDOS to show your appreciation

• Can not use the card PXI controlling SCXI for something else

  Hi all

  We have a hybrid chassis of 1052 with a PXI-6221 (control of the special SCXI version) into the slot of the 8th and, while it allows us to access map of the SCXI-1540 module without problem, if I try to add the NI PXI-6221 to the list of data acquisition cards to read the definition of system files or I make reference to any channel in a task of analog input (custom device) it is telling me that the resource is reserved. When I list the card in the system definition file, it gives the error message even if I turn off the single-point support timed by the hardware.

  I went back to the documentation for the Web site and I couldn't find a place where it says you need a card PXI for controlling SCXI cards but that the PXI card controls became useless.

  I'm doing something wrong?

  Thank you.

  Dear Claudio_G,

  That should really be a limitation in VS2011 because there are future news added since VS2011.

  And the reason why it works in the custom device could be the one custom unit as PXI6221 and SCXI1540 are separated internally in which the task and VS that it works in the same task.

  Then when it works properly in the custom device I recommend to use this way or other wise update to VS2013.

  Kind regards

  Oleg Scherling, mengg | Engineering applications. National Instruments | NIG. |

• 9174 OR with 2 cards 9233 and 1 card 9234

  I want to use a 9174 OR-DAQ with 2 cards 9233 and 1 card 9234, 9233 card allows us to sample up to 50 kech. / s and the 9233 up to 51.2 kech. / s. Now, we start the sampling at the same time. We work with 12 microphones, four in each card. It does not matter if each card samples at a different pace, we only need the highest possible in all cases. The problem is that we have not found a way to do this with the DAQ 9174 materials. When you have completed a task of sampling, it seems that sampled to 51.2 kech. / s with all cards, even with the 9233. What can we do to accomplish this task? Thank you in advance.

  Hi Luis,.

  You see the expected behavior.  As you have noted, the 9233 has a maximum rate of 50kS/s and the 9234 a maximum rate of 51.2 kech / s but that's only what they are capable of using their internal time base.  The 9233 specifies a max rate using a base of external time of 51.3kS / s.  When you put s and 9234 9233 s in the same spot, DAQmx chooses the fastest time base module (in the 9234 in this case) and he shares with the other modules.  This has the effect of executing your 9233 s to 51.2 kech / s and is located in the module specifications.

  I don't know why you do not want to run run the 9233 s 50kS/s, but if you wanted to you could put them in a separate task without the 9234 and they would use their internal time base to run 50kS/s.

  The other option is to define the basic source of time clock sample and the rate to a base time of one of the 9233 s.  If all the modules have been in the same spot, your 9234 would go then to 50kS/s as well.

• Stream of 6537 s on the drive with another card as well.

  Hello, we are planning to have a platform that has 3 PXI 6537 s and another card for playback of a sync signal (North Atlantic Instruments 75 3). We capture cards PXI 10 MHz and the 3 75 between 10 and 20 Hz, regardless if we taste a bit faster than that, but we can't go much more slowly. We need to store the result in a known file format so we can analyze it later.

  From the example of reference for data streaming of double PCIe 6537 s example of disc (http://zone.ni.com/devzone/cda/epd/p/id/5315), it seems simple enough to add another PXI card.  We are OK with that.

  What is the best approach to take the card sync?

  Our first choice is so far:

  To read a value from the sync every time it happens around the loop of the producer; i.e. every 20ms. This will taste at 50 Hz, but that's OK. Store us the values in a table of fixed value size zero and push the table on the queue at the end of the case 'true '.  It's easy enough but... The 3 1 d Raw U32 DAQmx readings work quite quickly to allow the Syncro values to the queue, in the 20ms window? (We have operated there should be about 16 MB of data per card for each reading). If not, is it close enough that he could be twisted so that sync data can be queued as well?

  Our second is:

  We plan to read data in sync in a zero arbitrarily large array initilized, especially if we know the size when write us data to the file. This can be filled at 20 Hz, in what I'll call (or the love of argument) a producer of the second loop. We could protect access using semaphores. In the loop of consumption, we read the three blocks of data, then data sync; That is to say:

  • read three lots of the queue database
  • lock the semaphore
  • write the content of the table
  • zero the content of the table
  • unlock the semaphore

  Does anyone know of a decent/better way to do this?

  Are we on track?

  Thank you

  Jon.

  Hi Jon,

  Yes, I think that your hypothesis is correct.

• Delays in DAQmxWriteRaw when you use several cards PXI-6733

  Application:
  I have an application that generates and writes the analog data at 300 kHz slightly underneath.  Data generation and output take place every 14 ms (we'll call it who a 'block',) through an event EveryNSamples leave a timing sheet.  In each block, 4000 samples of analog data are generated and output to 6 of the 8 channels of analog output of the PXI-6733.  The output buffer is set to twice the block 4000 writing samples and pre-filled with 4000 zeros, so the output is always a block behind the data generated.  If a single block exceeds 14ms to generate and write on the analog samples, the output buffer will be against the wall and exit stop (regeneration is disabled.)  I recently needed to add more than 10 output channels, so I installed a second PXI-6733 map in the chassis and set up a second analog output task to write the second map.

  Problem:
  As analog data are generated on demand in each block of 14 ms, the program cannot take more than 14ms to generate the data and write them on the cards, otherwise we will underflow analog output.  Thus, any unwanted delay must be avoided.  Data generation stage does not take very long (in my test it is off and decision< 1ms,)="" but="" i'm="" seeing="" some="" problems="" when="" i="" write="" the="" data="" to="" the="" pxi="" cards. ="" i'm="" using="" the="" daqmxwriteraw="" function="" to="" write="" the="" samples="" to="" the="" cards. ="" the="" function="" is="" being="" called="" twice="" every="" update="" loop:="" once="" for="" each="" output="" task="" (card). ="" when="" i="" added="" the="" second="" card,="" i="" noticed="" that="" occasionally="" the="" call="" to="" daqmxwriteraw="" would="" take="" much="" longer="" than="" 14ms,="" causing="" buffer="" underrun="" errors="" (-200016)="" on="" the="" second="" card,="" or="" regeneration="" errors="" (-200290)="" on="" the="" first="" card. ="" i="" inserted="" timing="" markers="" around="" each="" call="" to="" daqmxwriteraw,="" and="" i="" see="" that="" normally="" the="" calls="" each="" take="" around="" 4.8e-5="" seconds="" to="" complete="" on="" card="" 1="" (whether="" alone="" or="" in="" conjunction="" with="" card="" 2). ="" on="" card="" 2,="" the="" calls="" take="" usually="" take="" about="" 4.8e-5="" seconds="" to="" complete,="" but="" they="" occasionally="" spike="" to="" between="" 5="" and="" 40ms="" (e.g.="" 6="" out="" of="" 300="">

  I wonder what would cause these erratic spikes in time it takes to DAQmxWriteRaw BIE called on the second card.  Is there a known issue with the help of 2 PXI - 6733 s in the same PXI chassis?  Could there be some sort of conflict of resources (not enough channels DMA, etc?)  The two report cards they have in DMA mode, and fill FIFO priority is set to NotEmpty.  The problem also occurs when the transfer mechanism is set to interruptions.

  Other Observations:
  I noticed the first edge of calendar corresponds to the point in the program to the location of loading the dll "nicesru.dll."  I can't find any information that features in this dll, and I don't know if it's a symptom or a cause.

  I also noticed that when an error occurs, I can't seem to stop and clear the tasks of production.  After trying to stop it and cancel all active jobs, keeps blinking the link on the PXI chassis light.  To reset, the only way is to go into solution of measurement and Automation Explorer and reset the second card 6733 manually (or use ResetDevice C calling).  There seems to be only the second PXI-6733, and it also happens when using the test panels in the MAX program.

  Material:
  PXI chassis, 1033
  1 x card synchronization PXI-6608
  2 PXI-6733 analog output cards x
  1 x card PXI-8461 CAN
  PXI, PCIe - 8361 I / map F

  Dell Precision T7600
  E5-2687W CPU Xeon

  Software:
  Windows XP SP3 32-bit
  NOR-DAQmx 9.0.2
  Visual Studio 2008 sp1

  I was able to solve the problem by moving the PCIe card in the PC to another location.  I assumed the problem was with how bus PCIe are managed by the motherboard, or how the resources have been allocated to the cards in this particular niche.  Move the map on the slot 16 second x on the motherboard seems to have solved my schedule delays.

• Why do you not more than 2 identical cards (face and costume) when playing Spider Solitaire with 2 card games on the computer?

  Trouble with Spider Solitaire.  Why do you think that more than 2 identical card (for example, the 2 of Spades) when playing with only 2 sets of cards?

  I think you mean that you choose "two Suits' aka intermediate level.  In the game to beginners, you use 1 costume, but the number of card must be the same (if I remember it's like 104 cards).  So that can really get out of four card games, but only one suit is shown.  If you choose "Two Suits", you get two costumes, but again, you have need of 104 cards.  So, it's several terraces.  So just some confusion here, this isn't two bridges, but two costumes.

• Sharing RAM with video card

  Hey. I have Samsung laptop with video card ATI radeon x 2300 (128 MB) and 4 GB of RAM. I heard that there is a possibility to share some of the RAM of your pc with video card. I don't use all the RAM so I think it would be very good luck to increase the performance of the video card. Is it possible to do this? :)

  PS same thanks before.

  Here is the procedure (if supported by your device and your BIOS): http://www.ehow.com/how_5924855_adjust-ram-used-video-ram.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Hello! I only paid with the card, but on my profile, no information on the purchase

  Hello! I only paid with the card, but on my profile information on buying.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Hello. My Creative cloud subscribe does not refresh. I had students sign up, but a few days ago it stopped because there is no money on my card. Today, I sent student anouther subscribe with anouther card, I saw that the money went to adobe but subscr

  My Creative cloud subscribe does not refresh. I had students sign up, but a few days ago it stopped because there is no money on my card to prolongate it. Today, I sent student anouther subscribe with anouther card, I saw that the money went to "adobe", but subscription is not activated yet. I can't work, what can I do? Thank you. Sorry for my English.

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I can't pay for my photoplans with multiple cards.

  I can't pay for my photoplans with multiple cards.

  Hello

  You will need to contact support by calling/chat for this request.

  Contact the customer service

  * Be sure to stay connected with your Adobe ID before accessing the link above *.

  Kind regards

  Sheena