Beginner help

Hi first time video editing, please be nice lol. My problem is the clips play very well in the source window, but when they are played in the program window in which it appears zoomed and pixel is low. Filmed on a go pro at 1080 p 60 fps. Thank you very much

Don't you don't need to convert if you have a computer of descent.

To begin do:

Tags: Premiere

Similar Questions

Beginner help on reformat hard drive laptop

Hi I'm new to this forum and I never reformat hard drive before > _ <

I have not driver OS from the seller, but I have genuine windows7 so my question is how to reformat my hard drive without a driver OS?

Of course I want to reformat my hard drive with my windows 7 and sorry for my bad grammar because English is not my first language > _ <

Help me please

Hello

You have a set of recovery DVDs, you should be able to start the reinstallation of the operating system by inserting Disc1 into the CD/DVD drive (close a window that can be opened when you do this), then by restarting the laptop to boot from the disc. As long as the process progresses, you will be asked to insert Disc2 and then later, Disc3.

Kind regards

DP - K

Beginner help. Changing an image of the stock in a pure black and white image without grayscale.

I'm taking a black and white (gray scale) tigerpaw and convert it to a totally black and white image without grey scale. I imported the image (free, unprotected) and size it. I used the magic wand to select all areas not black and I want to just convert to white, but I can't seem to understand this. I'm sure this is a stupid question, but the solution is to escape despite the search. Thanks for any help.

Now that you have selected all of the areas you want to edit white > fill and, in the field of use, choose white. The mixture of Normal mode.

If you wish, you can select > Inverse the selection and edition > fill with black

Then select > deselect

Beginner - help please - import Aperture library

Try to import a large library on an external hard drive and not getting very far!
By choosing the 'Aperture library Import' connect, I get the message "an internal error has occurred. "Could not create working directory: /Users/xxx/Documents/.aperture2Lightroom.
Any help appreciated to having spent me the first post.
M

Permissions on the folder of Documents to be read/write.

Beginner help you (Press)

Hey everybody
so it is a simple problem, I have a movie of 60 images in one layer and another layer with 2 buttons.
I want the movie to play forward while one button keeps PRESSED and play back when we continue pressing the other button.
I tried this simple code, but it didn't work...
on {(press)
nextFrame();
}
I used this code in the button that plays forward, but it moves only 1 frame. I'm really new at this, some1 help!

Give me your e-mail, I'll send it

Beginner help required - 1 week

Hello everyone this is my first post here, and I don't know if I am posting this in the right place. I started to learn the flash of my own for like 1 week already, and I have a problem, let me explain:
I have two layers: the first layer has 50 images and has a tire jumps in the lesson of the Panel help, this thing called "How do i...". ', in one of the lessons that we learn to create something jump (basic Flash > create Animation timeline). Here, I have a motion tween in frames 1-24 to make him go back and a motion tween 25-50 for get him down.
Now, in the other layer, I have another tire but with 30 images, with a motion tween in frames 1-14 to make up and 15-30 to make him down.
When I test, the first tyre in the first layer with 50 executives always loops, bounce perfectly, but the second tire in the second layer with only 30 frames, desapears after completing the cycle and reappears when a loop is executed to frame 1.
so my question is, what do I do to get the second tire keep jump without desappearing?
NOTE: the plan is to do two tires boucing with diferent speed. as when one does 10 jumps it would make 13 jumps or so...
NOTE 2: I took the creation of 250 executives too complete a perfect cycle where bouth 1 and 2 tire tire would hit the ground at the same time. but there isn't an easier way?

Either have the second tire jump twice in the 50 first frameworks, or create the 2 tires bouncing animations also 2 separate movieclips and place those in the timeline (an image is sufficient).

Beginner help and I just can't understand this...

So I try to guide a few words. I put my anchor and begin to follow the curves and create the path and then finished the first letter. But when I start the 2nd letter and my first anchor I'm totally losing the first letter that I have drawn just a click away. Why? How to keep the first letter and then go to the 2nd? If I'm unclear in my question or I use bad conditions please ask me what you are confused about and I'll try to re - explain. Help if I'm doing this for my wedding and I made the images in layers, but there are no layers with my letters they need all in a single layer. Can I do each on its own layer and then put them all back on a single layer again? PLEASE HELP ~ ~! THANK YOU IN ADVANCE WITH THE BOTTOM OF MY CŒUR OF THOSE WHO CHOOSE TO TRY AND HELP...
I understand not a screenshot of what I'm doing and what I get. Captain Morgan photography is what I'm doing and the Minnesota photo shows what happens after I receive the first letter made.
WyldRyd

Looks like you are using a color fill with the background color (for example, white on white) on no fill color. When you draw the first path, or letter, yo can see the path because it is selected. When you start to draw the second path, the first path seems to disappear becaue it is not selected. It is still there, though. Either go to the map view (command Y) or select the first letter (where you drew just click) and apply a color fill different through the color or Swatches Panel.

CS3 beginner help - overlapping?

I'm new to Illustrator and I'm sorry if this is a silly question but I tried all kinds of things and I just can't cope. I wonder how you remove partially overlapping an object on another object. I think it has something to do with the Pathfinder, but for the life of me I can't do it to do it properly. I've attached a file to show what I mean. What I would like to work how to do the top group look like the low Group (as in each object overlapping another in a field, but under another object in another domain). I can do it by cheating, as shown in the bottom group, but I tell myself that there must be a way to do it properly.
Any help would be appreciated. Oh, and I use Illustrator CS3.
Thank you

The sample allows you to...

Here is a quick movie showing how. Pathfinder > Trim is actually better for this situation and you must back the star

Click here for the film

That's really all depends on the art. Just add a few points and remove the end of the point of the star can be faster. But for a complex work pad can be useful.

Need beginner help
I used a tutorial from lynda.com learning ActionScript. I wrote a simple code to display a thumbnail, and on the passage of the mouse and expand. The Thumbnail.as code is as follows:

package com.lynda.as3et.photoviewer.ui
{
import flash.display.Sprite;
import flash.display.Loader;
import flash.net.URLRequest;
import flash.events.MouseEvent;
import flash.events.Event;
import flash.filters.DropShadowFilter;

Thumbnail/public class extends Sprite {}

private var _loader:Loader;
private var _width:Number;
private var _height:Number;
private var _mainAssetUrl:String;

public void miniature (url: String, mainUrl:String, defaultWidth:Number, defaultHeight:Number);
{
_width = defaultWidth;
_height = defaultHeight;
_mainAssetUrl = mainUrl;
_loader = new Loader();
var request: URLRequest = new URLRequest (url);
_loader.contentLoaderInfo.addEventListener (Event.COMPLETE, goToDefaultState);
_loader. Load (request);
addChild (_loader);
_loader.addEventListener (MouseEvent.MOUSE_OVER, goToMouseOverState);
_loader.addEventListener (MouseEvent.MOUSE_OUT, goToDefaultState);
}

private void goToDefaultState(event:Event):void
{
_loader. ScaleX =. 9;
_loader. ScaleY =. 9;
_loader.filters = [new DropShadowFilter()];
}

private void goToMouseOverState(event:Event):void
{
_loader. ScaleX = 1;
_loader. ScaleY = 1;
_loader.filters = [DropShadowFilter (10,45,0x222222,1,10,10) News]
}

}
}

The code for PhotoViewer.as is as follows:

package {}

import flash.display.Sprite;
import com.lynda.as3et.photoviewer.ui.Thumbnail;

SerializableAttribute public class PhotoViewer extends Sprite
{
public void PhotoViewer()
{
miniatures: miniature var = new thumbnail ("Images/CronoCrossThumbnail.jpg", "Images/CronoCross.jpg", 90, 90);
addChild (thumbnail);
}
}
}

The error codes I get are as follows:

Gravity and Description path location creation time Id resource
1120: access of undefined property _loader. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 26 1234493943147 293

1180: call to a method may be undefined addChild. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 26 1234493943147 292

1120: access of undefined property _loader. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 25 1234493943147 290

1120: access of undefined property requests. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 25 1234493943147 291

1120: access of undefined property _loader. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 24 1234493943146 288

1120: access of undefined property goToDefaultState. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 24 1234493943146 289

1120: access of undefined property url. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 23 1234493943149 298

1120: access of undefined property url. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 23 1234493943149 299

1120: access of undefined property _loader. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 22 1234493943146 287

1120: access of undefined property _mainAssetUrl. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 285 1234493943144 21

1120: access of undefined property mainUrl. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 21 1234493943145 286

1120: access of undefined property _height. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 20 1234493943144 283

1120: access of undefined property defaultHeight. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 20 1234493943144 284

1120: access of undefined property _width. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 19 1234493943143 281

1120: access of undefined property defaultWidth. PhotoViewer/com/lynda/as3et/photoviewer/ui Thumbnail.as line 19 1234493943144 282

I have absolutely no idea what I'm doing wrong. Can anyone help?

Thank you.
Notice that there is a semicolon at the end of the constructor of the tile. This one

public void miniature (url: String, mainUrl:String, defaultWidth:Number, defaultHeight:Number); //< ----="">

Delete it and everything works perfectly (regarding the Thumbnail.as :)

HTH

Beginner; Help with lens opting for a Photo of the city

Try to take a picture of a town of a certain vision. I have a NIKON D5300. What would be the best lens to use? Capture photo clock morning and evening.

Try

Beginners Questions Forum: Digital Photography Review

Photography for beginners forum | Photography Forum

Beginner help - faced with natural join as an example
Hello

My apologies for how basic this query probably will, but I am teaching from zero and do not like to move from topic to topic without a good understanding of why I get the results I get, rather than knowing 'it's how he did

I use the guide of the official examination for 1z0 - 051, and 320 page there is the following year:

+ "The table JOB_HISTORY sharing three columns with the same named with the EMPLOYEES table: EMPLOYEE_ID JOB_ID and department_id." You are required to describe the tables and fetch the EMPLOYEE_ID, JOB_ID, +.
+ Values for all rows retrieved using a natural join pure department_id, LAST_NAME, HIRE_DATE and end_date. Alias the table EMPLOYEES as EMP and the table JOB_HISTORY that JH and use dot notation where possible. » +

Their solution (which is about what I came to start with) is:

SELECT employee_id job_id, department_id, emp.last_name, emp.hire_date, JH.end_date
OF JH job_history
NATURAL JOIN employees emp;

This translates into the only employee "Taylor" being returned.

------------------------------

Is it possible someone could 'hold my hand' through this example please? I have no idea why only one result is returned, but in addition, I don't know what else I expected - clearly my understanding of the natural join clause is severely lacking. The book States that:

+ "The execution of this statement returns a single row with the same values EMPLOYEE_ID JOB_ID and department_id in the two tables." +

I guess I'm confused because I thought that the join clauses should deploy additional content to other tables to display, to not limit lines - which is what it sounds like they mean by "returns a single row with the same number and job_id department_id values in the two tables."

I am very confused!

Thanks in advance,

Nick
Hi, Nick.

Nick woodward wrote:
Hello

My apologies for how basic this query probably will, but I am teaching from zero and do not like to move from topic to topic without a good understanding of why I get the results I get, rather than knowing 'it's how he did

Good thinking!

I use the guide of the official examination for 1z0 - 051, and 320 page there is the following year:

+ "The table JOB_HISTORY sharing three columns with the same named with the EMPLOYEES table: EMPLOYEE_ID JOB_ID and department_id." You are required to describe the tables and fetch the EMPLOYEE_ID, JOB_ID, +.
+ Values for all rows retrieved using a natural join pure department_id, LAST_NAME, HIRE_DATE and end_date. Alias the table EMPLOYEES as EMP and the table JOB_HISTORY that JH and use dot notation where possible. » +

Their solution (which is about what I came to start with) is:

SELECT employee_id job_id, department_id, emp.last_name, emp.hire_date, JH.end_date
OF JH job_history
NATURAL JOIN employees emp;

This translates into the only employee "Taylor" being returned.

------------------------------

Is it possible someone could 'hold my hand' through this example please? I have no idea why the only one result is returned,

This is because there is only one combination of rows from the tables emp and jh such as the join condition is TRUE. In a natural join, the join condition is not specified, so it would be better if you started looking at the equivalent natural join:
```
SELECT   emp.employee_id
,       emp.job_id
,       emp.department_id
,       emp.last_name
,       emp.hire_date
,       jh.end_date
FROM      hr.job_history     jh
JOIN       hr.employees      emp  ON   emp.employee_id    = jh.employee_id
                    AND  emp.job_id          = jh.job_id
                    AND  emp.department_id  = jh.department_id
;
```
on the other hand I don't know what I was expecting - clearly my understanding of the natural join clause is severely lacking. The book States that:

+ "The execution of this statement returns a single row with the same values EMPLOYEE_ID JOB_ID and department_id in the two tables." +

I guess I'm confused because I thought that the join clauses should deploy additional content to other tables to display, do not limit the rows...

A join does both. Each row in the result set can have columns (or drift) the columns in the table and it can have any row of a table associated with the lines of all (or part) of the other table. There are 107 lines in the emp table and 10 rows in the table of jh. This means that could result in a join 2 tables can 0-107 * 10 = 1070 lines. If the join conditions are so strict that no combination of lines met, then the result set has 0 rows. However, if they are so loose that all combinations of lines 2 brands joins tables condition TRUE, then each of the 107 rows in the emp table will join each of the 10 lines in the table of jh.

Try to play with the join condition and see what happens. For example, we will comment on 2 of the 3 parts of the join condition, so that the only condition on the left is "emp.employee_id = jh.employee_id". Also, we'll include a few other columns in the table of jh and no poster not dates, just to make room for the new coplumns. So, if we execute this query:
```
SELECT   emp.employee_id
,       emp.job_id
,       emp.department_id
,       emp.last_name
-- ,       emp.hire_date          -- Commented out to save space
-- ,       jh.end_date          -- Commented out to save space
,        jh.job_id             -- For debugging
,      jh.department_id     -- For debugging
FROM      hr.job_history     jh
JOIN       hr.employees      emp  ON   emp.employee_id    = jh.employee_id
--                    AND  emp.job_id          = jh.job_id
--                    AND  emp.department_id  = jh.department_id
;
```
then we get these results:
```
EMPLOYEE            DEPARTMENT                       DEPARTMENT
     _ID JOB_ID            _ID LAST_NAME  JOB_ID            _ID
-------- ---------- ---------- ---------- ---------- ----------
     101 AD_VP              90 Kochhar    AC_ACCOUNT        110
     101 AD_VP              90 Kochhar    AC_MGR            110
     102 AD_VP              90 De Haan    IT_PROG            60
     114 PU_MAN             30 Raphaely   ST_CLERK           50
     122 ST_MAN             50 Kaufling   ST_CLERK           50
     176 SA_REP             80 Taylor     SA_REP             80
     176 SA_REP             80 Taylor     SA_MAN             80
     200 AD_ASST            10 Whalen     AD_ASST            90
     200 AD_ASST            10 Whalen     AC_ACCOUNT         90
     201 MK_MAN             20 Hartstein  MK_REP             20

10 rows selected.
```
Why do we get only 10 lines? There are other employee_ids, such as 100 and 206 in the emp table. Why do we see these employee_ids in the results? In addition, the emp.employee_id is unique; in other words, no 2 rows in the emp table have the same employe_id. How the result set can have two lines with the same employee_ids, such as 101 or 200?

Now try to do the more difficult condtion join, by a non-commenting on the terms that we have commented earlier:
```
SELECT   emp.employee_id
,       emp.job_id
,       emp.department_id
,       emp.last_name
-- ,       emp.hire_date
-- ,       jh.end_date
,        jh.job_id
,      jh.department_id
FROM      hr.job_history     jh
JOIN       hr.employees      emp  ON   emp.employee_id    = jh.employee_id
                    AND  emp.job_id          = jh.job_id     -- *** CHANGED  ***
--                    AND  emp.department_id  = jh.department_id
;
```
The results are now:
```
EMPLOYEE            DEPARTMENT                       DEPARTMENT
     _ID JOB_ID            _ID LAST_NAME  JOB_ID            _ID
-------- ---------- ---------- ---------- ---------- ----------
     200 AD_ASST            10 Whalen     AD_ASST            90
     176 SA_REP             80 Taylor     SA_REP             80
```
He was 2 of 10 lines in the previous result set. What happened to the other 8 lines that have been in this result set? Fior example, why has this line:
```
EMPLOYEE            DEPARTMENT                       DEPARTMENT
     _ID JOB_ID            _ID LAST_NAME  JOB_ID            _ID
-------- ---------- ---------- ---------- ---------- ----------
     176 SA_REP             80 Taylor     SA_MAN             80
```
in the result of 10 rows value (produced by the query with a join condition only 1), but not in the result of 2 ranks (produced by the query with the additional condition 'AND emp.job_id = jh.job_id')?

If you do not completely understand the natural joins, don't worry too much. In practice, nodody uses a natural join. However, natural joins are a type of INNER join and inner joins are extremely frequent. It is very important for you to understand how joins inside, such as the 2 I posted more top, work.

Published by: Frank Kulash, March 18, 2013 17:08
Results and applications added

Fade in a preloader - beginner help

Hi the Adobe Forums,
So I actually managed to put in place a pre-loader and have for the time being, they way I do my loading progress bar are stretching its x-axis. But how can I change this to make it bland (animating its opacity from 0 to 100%) instead of stretching? What kind of clever code could you guys come up with? The code is written in ActionScript 3 inI, I think. I am using Flash CS5.
Here are the actions for the preloader:
to import flash.events.ProgressEvent;
import flash.events.Event;
Stop();
this.loaderInfo.addEventListener (ProgressEvent.PROGRESS, onProgress);
this.loaderInfo.addEventListener (Event.COMPLETE, onComplete);
function onProgress(e:ProgressEvent):void
{
var loaded: number = e.target.bytesLoaded;
var total: Number = e.target.bytesTotal;
var pct:Number = loading/total;
loader_rzd_mc. ScaleX = pct;
loaded_txt. Text = (Math.round (pct * 100)) + '% ';
}
function onComplete(e:Event):void
{
nextFrame();
}
Thanks in advance,
Anton

Just set the alpha property of you want to have melted to track the value of the PCT.

loader_rzd_mc.Alpha = pct; If it is the object you want to fade

(Beginner) Help please

Hey, man, I practically just started using flash cs5 and I just can't for the life of get me my movieclip symbol to animate in the main timeline.
It animates whenever I'm inside the symbol, but when I left that is not, at this stage, it is really depressing to me. I tried a lot of time and he feel of like im the only one knows this, so I must be doing something wrong, but I don't know.

What you describe is normal. Unless you test the file, it will not animate your movieclip and the movieclip will only sit in his first picture.

Beginner help - PUT confusion
Dreamweaver 8.
If someone took the time to give me the details of this, I would be very grateful. I get very frustrated with the behavior seemingly random files. What I want is:
-To save a file locally, or click on the button PUT, or press F12 (or some other keystroke (s), if they will do the trick), in certain combinations and know that the file has disappeared on my test server and go to the remote server. Without having to go to the screen of 'big' get / put and manually check every time whether it is set on the remote server or test.
-Once I have things to work on the test server (which is just a folder on my local computer), I'm happy to move on to the big screen, manually select Remote, manually select the files to download and put individidually. I know DW will all the files that have changed, which is OK. But it's the behavior during the development with the test server which is really important to me.

I do something wrong, either in the installation program, or whatever. It seems to me that DW randomly:
-past since the testing as the default destination, the remote server. So clicking on PUT followed by F12 often uses the old file, and worse still, the remote site has now my page changed recently, possibly wrong,
-puts it sometimes save the file to the test server. Sometimes, do not save the file, but by pressing F12, saves both, I think.
> So should I just be able to press F12 and what he COULD for me?

Yes, if YOU HAVE one) enabled guest for the dependent files on the PUT / GET in the
(preferences, b) then made a PUT, c) then clicked on the "don't ask me".
checkbox and then (d) clicking the OK button. In other words, if you have
set the default value to all the dependent files without asking, then it will be
do it automatically when you F12. If not, then you will have to do
manually.

> I was told that the economy or F12 ING will put the file in the
> test server

You said wrong. Economy will NOT save to the local folder. If
you are a put option by default of the dependent files, then F12 will put the file and
his dependents for you.

--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
==================

"anynick32" wrote in message
News:gh13p0$KP4$1@forums. Macromedia.com...
> OK, well I'm going to assume while the times, it seems to have dodged just above
> to
> Remote without telling me that it is my mistake and I must have done
> something
> somewhere to get there.
>
> So should I just be able to press F12 and what he COULD for me? Sometimes
> This
> seems to work, others do not. There is no setting in the Site maintenance for
> it work on
> test server - is the parameter tab of the remote server, also apply
> to
> the testing server? (I didn't dare put on, because I certainly)
> not
(> want DW just send anything to record directly on the remote server.).
>
> I was told that the economy or F12 ING will put the file in the
> test server, but that certainly doesn't happen 100% of the time.
> If
> Maybe it's only one of them he does, and sometimes I take evil
> one.
>

Beginner: HELP Please, please!
Hello world
I desperately need to know how to get files from the server to a site I built (with DW MX) a long time ago and copy them to my disc so I can update/modify the content. I managed to make the FTP connection but then the GET option does not show me (and I do not know) how to record my disc without messing up the paths and links. Editing files directly on the server does not seem to work either, when I try to get an overview of the changes in the browser, I get a 404 error... and I don't even have local folders more because they were on a PC, and now I use a Mac.
Define a local site to a remote site. Connect to the remote site. Select
everything and GET it. It will reach the local site. You now have the
files on your local computer.

--
Murray - ICQ 71997575
Adobe Community Expert
(If you * MUST * write me, don't don't LAUGH when you do!)
==================
http://www.projectseven.com/go - DW FAQs, tutorials & resources
http://www.dwfaq.com - DW FAQs, tutorials & resources
==================

"jvmonteiro" wrote in message
News:gl2ut6$9R9$1@forums. Macromedia.com...
> Hi everyone,.
> I desperately need to know how to get files from the server in a site
> who
> I have long established (with DW MX) and copy them to my disc so I
> can
> update/modify the content. I managed to make the FTP connection but
> then
> the GET option does not show me (and I do not know) how to record their return to
> my
> disc without messing up the paths and links. Edit files directly on
> the
> server does not work either, when I try to get an overview of the changes in the
> browser, I get a 404 error... and I don't even have local folders
> more
> coz they were on a PC, and now I use a Mac.
>

Beginner help

Similar Questions

Maybe you are looking for