Beginner looking for best practices to implement my first ESXi server.

Similar Questions

• Beginner looking for best practices in configuration in AE CS4 (MacPro 8core)

  Hello

  I am a video editor familiar with FCP and motion, moving in AE CS4 because it's more power in a 3D space. I installed the program and started my basic training of Lynda, but I want to make sure I got the installer so as not to cause problems on the road of.

  For example, in FCP, I use a second drive for makes etc., and a RAID array for FCP files and various media (both imported and exported) organized by project and by type. I intend to do the same for EI, but looking at the AE prefs, I see I can assign memory per CPU etc, and I just want to be sure that I use the Procs and RAM effectively. The machine is a machine of 8-Core MacPro with 12 GB of RAM. The program sees 16 processor cores, so I should split the 10 GB hosting AE to use during these carrots (using the pref multiprocessing tab), or simply let AE understand?

  In addition, I am confused about the overflow Volumes option. What gets put there, when and why?

  Finally, if there is a newsletter along the lines of the Larry Jordan FCP (larryjordan.biz) site I'd reference.

  Thanks for your help.

  -C

  Concerning the use of RAM and processor, see the following page:"Performance Tip: don't starve to death your software of RAM '. Following the guidelines there for 12 GB your computer, would you let 2 GB for other applications, perhaps a couple of GB for the trial leading to hold executives preview RAM - leaving you with 2 GB each of four background rendering process.

  Also, don't be fooled. 8-core computer is just an 8-core in After Effects is. The so-called doubling of processor cores created by hyperthreading is not relevant for simultaneous rendering of several images of multiprocessing.

  Regarding overflow volumes, see the following page: "of the volume of overflow and segment settings"

  If you are new, please start here. Pretty please?

• I'm looking for 'best practices' tips for a configuration of a project (first CS5.5, Windows 7 Pro)

  I was instructed to update an old corporate video with narration, sounds, graphics and new music.

  Video camera ONLY material that I've had a DVD corporate (NTSC) - the original source material is simply not available. .

  I can rip the DVD in MPEG 2 and import it into first without problem, but I would like to be able to use resolutions higher the updated graphics.

  I intend to export it to Youtube (HD) but can export to DVD or BluRay as well.

  My question really reduced management of sequences.   I tell myself that my sequence settings must be the highest resolution, I expect to work with (Youtube HD or Bluray) which allows you to easily export to lower quality, but I don't really know if it's as simple as that.  Is there a standard method in the industry?  Am I close?

  First may actually use the DVD .vob files, just copy DVDs to hard disk, and then import in first.

  What is the DVD existing video in a 4:3 or 16:9 format? If 4:3, think about how you will work in a program of 16:9. Rather than having the black terminal on the side bars, many publishers will some sort of background to fill this space. A popular solution is to reproduce a bass track, stretch 4:3 video to fill the screen and add Gaussian blur effects. Because the colors/content of the sidebars will correspond to the main video, it's a little disguises the fact that the video is 4:3.

  If you put SD images in a HD program, it will look 'soft' compared to the HD images. As a compromise, you can consider the new edition as 720 p instead of 1080 p program, so that the SD resolution is not to be tense. All the computer video/video YouTube is not interlaced, meaning to sequences and exports should be done as Progressive.

  Flow problem of potential work - if you take the images existing SD from the DVD and it high end in a HD sequence, then export to DVD (SD resolution), the video turned into mush. She was raised, and then again once, dowscaled really kill the quality. May be required to copy the HD sequence in a sequence of SD, difficulty of the problems of size / scale of graphics and titles and DVD for the export of the sequence of SD to avoid the top of range/reduce images SD. Note that the DVD-video is highly compressed, so you already work with a weak source material, recompress again will be a hit in quality in all cases, but certainly avoid the top of range/cut again.

  I don't have Adobe apps in front of me at the moment, but I think that Blu - ray 720 p export options are limited, perhaps 720 p at 59.94 only, not sure. Which may affect your decision to 1080 p and 720 p.

  Hope these tips help you

  Thank you

  Jeff Pulera

  Safe Harbor computers

• looking for best practices on the display of the data inside a TableView

  I have an app that can extract one ore more of 300,000 lines as a result of a request, and I am their display in a TableView... I use a mechanism to bring the data "off-site", when I do the query, an object with the ID of the lines is set in memory and a 'queryResultKey' went to start asking for the data set.
  The controllers send the queryResultKey saying the DAO that she already results N, the DAO will return X records (from N + 1 to N + J) or less if the total number of records is reached. At this point, records are added to the elements of the table view using an addAll to list related to the itemsProperty table.
  It works very well for early records already, but all of a sudden a Null pointer Exception is raised:

  ene 15, 2013 12:56:40 PM mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5 call
  SEVERE: null
  java.lang.NullPointerException
       at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:291)
       at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
       at com.sun.javafx.scene.control.ReadOnlyUnbackedObservableList.callObservers(ReadOnlyUnbackedObservableList.java:74)
       at javafx.scene.control.TableView$TableViewArrayListSelectionModel$3.onChanged(TableView.java:1725)
       at com.sun.javafx.collections.ListListenerHelper$SingleChange.fireValueChangedEvent(ListListenerHelper.java:134)
       at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
       at com.sun.javafx.collections.ObservableListWrapper.callObservers(ObservableListWrapper.java:97)
       at com.sun.javafx.collections.ObservableListWrapper.clear(ObservableListWrapper.java:184)
       at javafx.scene.control.TableView$TableViewArrayListSelectionModel.quietClearSelection(TableView.java:2154)
       at javafx.scene.control.TableView$TableViewArrayListSelectionModel.updateSelection(TableView.java:1902)
       at javafx.scene.control.TableView$TableViewArrayListSelectionModel.access$2600(TableView.java:1681)
       at javafx.scene.control.TableView$TableViewArrayListSelectionModel$8.onChanged(TableView.java:1802)
       at com.sun.javafx.scene.control.WeakListChangeListener.onChanged(WeakListChangeListener.java:71)
       at com.sun.javafx.collections.ListListenerHelper$Generic.fireValueChangedEvent(ListListenerHelper.java:291)
       at com.sun.javafx.collections.ListListenerHelper.fireValueChangedEvent(ListListenerHelper.java:48)
       at com.sun.javafx.collections.ObservableListWrapper.callObservers(ObservableListWrapper.java:97)
       at com.sun.javafx.collections.ObservableListWrapper.addAll(ObservableListWrapper.java:171)
       at com.sun.javafx.collections.ObservableListWrapper.addAll(ObservableListWrapper.java:160)
       at javafx.beans.binding.ListExpression.addAll(ListExpression.java:280)
       at mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5.call(TablaResultadosController.java:433)
       at mx.gob.scjn.iusjfx.presentacion.tesis.TablaResultadosController$5.call(TablaResultadosController.java:427)
       at javafx.concurrent.Task$TaskCallable.call(Task.java:1259)
       at java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:334)
       at java.util.concurrent.FutureTask.run(FutureTask.java:166)
       at java.lang.Thread.run(Thread.java:722)

  This exception multibordure inside the Thread that fills the table:

  task = new Task<Integer>() {
              @Override
              protected Integer call() throws Exception {
                  while (listaTesis.size() < pag.getLargo()) {
                      List<TesisTO> tesisParaincrustar = fac.getTesisParaLista(pag.getId(), listaTesis.size());
                      try {
                          listaTesis.addAll(tesisParaincrustar);
                      } catch (Exception exc) {
                          Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                      }
                      tesisActuales.addAll(tesisParaincrustar);
                      updateProgress(listaTesis.size(), pag.getLargo());
                  }
  
                  return new Integer(100);
              }
  
              @Override
              protected void succeeded() {
                  status.getProgreso().setVisible(false);
                  preparaFiltros();
                  llenandoTabla = false;
                  tblResultados.getSelectionModel().select(0);
              }
          };
          status.getProgreso().progressProperty().bind(task.progressProperty());
          new Thread((Runnable) task).start();

  So that may be another strategy to simulate (or have) all the registry values are in memory and 'capture only the necessary links' to display them in the TableView?
  Any idea will be useful.

  The first thing I would do here is to check that

  fac.getTesisParaLista(pag.getId(), listaTesis.size())
  

  cannot return null in all circumstances. If it returns null, then it is the source of your exception. In this case, you must add the caution appropriate to your code:

  if (tesisParaincrustar != null) {
                      try {
                          listaTesis.addAll(tesisParaincrustar);
                      } catch (Exception exc) {
                          Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                      }
                      tesisActuales.addAll(tesisParaincrustar);
  }
  

  For the number of thread, you can plan everything which modifies the user interface to run on the Thread of the FX Application using Platform.runLater (...). Note that any data that you pass into that must not be changed elsewhere. If you can do something like:

  Platform.runLater(new Runnable() {
    @Override
    public void run() {
                      try {
                          listaTesis.addAll(tesisParaincrustar);
                      } catch (Exception exc) {
                          Logger.getLogger(TablaResultadosController.class.getName()).log(Level.SEVERE, null, exc);
                      }
                      tesisActuales.addAll(tesisParaincrustar);
    }
  });
  

  You need to add the 'final' keyword to the declaration of tesisParaincrustar to get this to compile.

  That's fine, assuming that the call to fac.getTesisParaLista (...) returns a new instance of the list each time (i.e. it does not change an existing list).

  You'll end up with only one problem: the condition in your while loop (...) refers to listaTesis.size (). Given that this list is now updated on a different thread to the thread of the while loop (...) management. This can (and probably won't be) cause the loop to terminate at the wrong time. You can adjust the condition while (...) so it does not refer to this list (for example, advance calculate how many things must be read, give this number to your implementation of the task and use it in the while condition (...).)

  There are actually two rules for multithreading in JavaFX:
  1. do not access the user interface outside the FX request Thread. This includes data related to the user interface structures. I guess at some point you have called tableView.setItems (listaTesis), so listaTesis should be considered as part of the user interface.
  2. don't run long running on the Thread of the FX Application tasks.

  In trying to comply with rule 2, you have violated rule 1.

  The incremental updates to a list that appears in a background thread is one of the most delicate uses of the task. Read the documentation of the API for task (http://docs.oracle.com/javafx/2/api/javafx/concurrent/Task.html): the example of "PartialResultsTask" under "a task that returns partial causes" is an example of what you're trying to do.

• the best practice is implemented Server Exchange and the domain controller in the same server

  the best practice is implemented in exchange server and the domain controller in the same server or
  put on another server

  Hello

  Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the public on the TechNet site. Please post your question in the following link for assistance:
  http://social.technet.Microsoft.com/forums

• I'm looking for the practical review of Photoshop CS5 files.

  I'm looking for the practical review of Photoshop CS5 files.  I downloaded the screenshots, but I need the files.

  I need to 2 - 3.psd, 3_2mask, SleepingPug, Parking, 4.1.psd etc.

  Hi Angelas,

  You can download the PSD files: free, PSD + 5.500 free Photoshop files

  Kind regards

  Tanuj

• Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Looking for best software Acrobat Writer/Conversion for Excel 2003.   I have Standard but you want to update.  Anyone have any ideas?

  Hi Dennis,

  Acrobat CC is not compatible with MS Office 2003 and currently, we only sell Acrobat DC. However, if you opt for a subscription of Acrobat DC you can install and use Acrobat XI that is compatible with Office 2003, but only to a certain update.

  Please check details of compatibility here: web browsers and applications of PDFMaker

  Thank you

  Abhishek

• Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looking for some practice files for video in line/book of "Adobe Photoshop CS5 Extended: Essentials. I use the tutorial via membership in Safari book online and the files are not available on Safari.  Do you know where I can get the files?

  Looks like the manufacturer was "Total Training. I can't find the title to Adobe.com

  http://totaltraining.com/store/Photoshop-CS5-extended-Essentials/

• Suggestions for best practices for ODI

  Hello
  
  We need some general indications for ODI best practices inplementations, regardless of the design and implementation, etc.
  
  Thanks for your suggestions. :)
  
  Mahesh

  Hello
  This document could be useful for you http://www.oracle.com/technetwork/middleware/data-integrator/overview/odi-bestpractices-datawarehouse-whi-129686.pdf (ODI 10 g)

• Qosmio X 770 - are looking for best free video player to play with 2D to 3D movie

  I have a Qosmio X 770 with NVidia 3D playback. I'm looking for the best free video player for playback of video clips 2D to 3D.

  Toshiba Video Player works fine, but I can't get it to play files in MP4 - AVC format. Is it possible to add codecs so it will play other formats?

  NVIDIA 3D Vision Player don't play all formats but when in 3D mode, there is no access to the commands. Volume can be set with the function keys and video can be suspended with combinations of keys that do not forget, but you can not fast to the front/back or access the slider to change the video position.

  Both are reasonable solutions, but none is perfect. Is there a better option out there? I tried StereoscopicPlayer but could not operate and it is limited to 5 minutes of play in any case.

  Both are reasonable solutions, but none is perfect.

  Software freeware as a perfect solution?
  I don't think you will get this software just for free...

  How to convert 2D to 3D in 2D to 3D converters movies?
  The KM Player supports also the 2D to 3D feature but does not support all formats... you have to pay for the full version get full support.
  Of course as large PowerDVD, but not for free.

• Just looking for best way to do... 2 data joined tables

  looking for advice this.

  using oracle 11 g.

  I have data im going to use in a view to update TABLE1 monthly.im going to see all these data via php in a web page.

  I would like to add a few modifiable of table2 values who will join table1.

  -drop the table1 table:

  create table table1)

  number of value1,

  Number of value2,

  number of value3,

  Number of VALUE4,

  number of Value5

  );

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (1119,4,54,772,643);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (22,345,55,278,446);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (314,193,75,542,676);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (13,396,59,232,670);

  INSERT INTO TABLE1 (VALUE1, VALUE2, VALUE3, VALUE4, VALUE5) VALUES (41,2003,505,232,7096);

  -select * from table1

  create the table2 table)

  VCLE NUMBER,

  NUMBER OF VERSION_NUM,

  COMMENTAIRES1 VARCHAR2 (50).

  comments2 varchar2 (50)

  );

  -select * from table2

  Vcle in table2 is a concatenation of value1, value2, value3 on table1.

  So the end result is on the web page of all the values in table 1, unmodifiable, 2 reviews in table2 fields that can be changed. A user can change these fields, then they will save in table2 with the key of concatenation. the reason why I want to do like this, with a second table is because whenever a user changes these fields I want to insert again to occur in this table, not an update, which will add a trigger, I have a new version number. This sounds like a mistake to do it this way?

  The strategy of the concatenation is a mistake.

  Concatenation requires strings, then you would be conversion 3 numbers to strings to concatenate, then convert it to a number stored in table2.

  If I insert = 11-v1, v2 = 11, v3 = 11 then insert v1 = 1, v2 = 11, v3 = 111.  I generates the same Vcle and either corrupt your data or make it impossible to tell what row in table1 = 111111 Vcle should concern.

  A substitution used as primary key in table 1 key is a way to fix this design.

• best practices of vCenter 4.1 SQL server 2008

  I was wondering if there is best practice documentation a SQL server 2008 vCenter 4.1 databases.  I am also looking to see if VMware provides a list of best practices SQL database maintenance or if they recommend suite Microsoft Best practice for SQL database maintenance.

  This pdf file is still topical

  http://www.VMware.com/files/PDF/vc_microsoft_sql_server.PDF

  with the KB below, you should have a good plan.

  http://KB.VMware.com/kb/1025914

  also, I suggest you run the DB instance in simple mode instead of full recovery.

• Beginner looking for the best upgrade memory for Tecra 8000

  Hello - I am currently looking to upgrade the memory on my Tecra 8000 the current 96 of at least 256.

  Is it possible that I can't find info on 256 MB extensions that are compatible

  I also want to upgrade my hard drive of at least 20 Gb, but I think it will be easier

  Any advice would be much appreciated

  Hello

  In my opinion, you should contact the Service partner and ask them what a memory module is compatible with your laptop. I found that PC100 128 MB (PA3005U) is certainly usable for Tecra 8000.

  Please be careful because all modules may not be recognized by BIOS correctly.

  It is possible that 256 MB RAM PA3069U - 1 M 25 is compatible but I'm not sure about this. Pick up information by the Service partner before buy you one.

• For best practices

  Reading on the web make me thing if im doing good things on BB as im starting. Can someone tell me which would be the best way in this case?

  And if I can get a nice link to read more info on this type of advice would be nice.

  staticclassFoo{        int mSplat;    }    Foo[] mArray =...
  
      publicvoid zero(){        int sum =0;        for(int i =0; i < mArray.length;++i){            sum += mArray[i].mSplat;        }    }
  
      publicvoid one(){        int sum =0;        Foo[] localArray = mArray;        int len = localArray.length;
  
          for(int i =0; i < len;++i){            sum += localArray[i].mSplat;        }    }
  
      publicvoid two(){        int sum =0;        for(Foo a : mArray){            sum += a.mSplat;        }    }
  

  Kind regards!

  two does not work because the uses of BB level JAVA does not support for each.

  one, there is no point of recording mArray in localArray. And performance wise there really isn't much difference between call .length vs len, so .length is fine.

  zero is more common, and it is good to use. Also usually in a loop for, you will see i ++ instead of ++ I, but in this case, it makes a difference.

• Best practices of implementation of Data Manipulation package

  Hello
  Would like to ask who is the best application for the manipulation of data (insert, update, delete) for a single table in the stored procedure.
  To create a procedure with an input parameter for the action such as 1 for insert, 2 for update and so on
  or
  creating separate procedures for each procedure pInsData for insert, pUpdData for update...

  Hello

  I propose to create a single procedure that manages all updates DML on a table. As you said, you can spend on one flag indicating the intended operation.
  It may be that one IN parameter, which can have different values, say - 'I' for Insert, 'U' for update and had "for deletion.

  Thank you
  Ankur