Beginning of DB RAC

Similar Questions

• How to set the waveform table to start data since the beginning of the race

  
  

  Create a property of the graph node.  The property you are looking for is history.  This property, you can clear the table.

• How can I reset firefox via the command script (linux)

  I'm trying to set up a build server from Jenkins that uses SeleniumHQ and Firefox ESR during integration testing.

  I installed Firefox ESR 24 and seleniumHq 2.42.2

  I found that the State / the Firefox profile is getting damaged when selenium code stops.

  This prevents the FirefoxDriver selenium to establish a control connection because firefox is blocked on Firefox "the last time I fell - what do you do? Start over or try to recover?' screen.

  I want to do is make sure that I always start with a configuration of default Firefox of pure plant at the beginning of each race.

  for example, a configuration "Reset to factory defaults".

  This should be OK because the Jenkins account is used only for this build process.

  Unfortunately, there is no documentation on how / what to do jump far to achieve this.

  What should I do to achieve this? I see that there is a directory ~/.cache/mozilla, but appears not to be the magical place I'm looking for...

  The main profile folder is here:

  • Windows: C:\Users\ < user > < profile > \AppData\Roaming\Mozilla\Firefox\Profiles\.
  • Linux: ~/.mozilla/firefox/ < profile >.

  You will need to remove this folder where files get corrupted when you close Firefox.
  The other location is for the cache and other files as topic: newtab miniatures and phishing protection database.

• Need to reset the button by default when you use the structure of the event?

  When you use the buttons with a mechanical action "releasing lock" to only trigger the same structure with the same 'value has changed', the button does not jump upwards as you would expect.  I can get to behave as I want by adding a "default reset" invoke the node, but this seems somewhat exaggerated.  Is there an easier way to get the button to jump to the top after pressing on?

  The button will reset once it is read by the code. This means that the terminal is inside the structure of the event. If you move outside the terminal, it would read only the beginning of the race and then never and it will not be reset.

  If the terminal is learn the structure of the event, it is read by the code (even if it is not connected to anything) and it reset as soon as the event has a chance to run.

• P2214H RGB and BGR?

  I read a few threads talking about the BGR issue with the p2314h. Im not sure if the p2214h has the same problem or not? I'm looking for a monitor 22 "or 23" with IPS and LED. Any recommendations? Am I better to go with something like the LG 23EA53V-P? I use the monitor for the general office. I read that BBG can result in blurry text, which is not ideal for general web browsing and word processing.

  At the beginning of the race, the LG P2314H AH-IPS and P2714H Samsung AD - PLS (LTM270HL02) sold with panels both RGB and BGR. Go forward in the Americas, all are RGB. I have no information on how to indicate the one you perhaps via the serial number or revision.

• DB not starting not due ORA-00205: error in the identification of 11GRAC control file

  Hello

  I have it configured in the OEL5 11 g RAC (11.2.0.1.0). When I tried to start the database using the command srvctl or by manually I get the below error. \

  RPRC-1079: failed to start of ora.rac.db resources

  ORA-00205: error in the identification of control files, see log alerts for more information

  CRS-2674: beginning of 'ora.rac.db', 'ractwo' failed

  CRS-2632: there is no more servers to try to place the "ora.rac.db" resource on which will achieve its investment policy

  ORA-00205: error in the identification of control files, see log alerts for more information

  CRS-2674: beginning of 'ora.rac.db', 'racone' failed

  The content of the alert below log.

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ RACDG/rac/controlfiles/control02.ctl".

  ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control02.ctl

  ORA-15001: diskgroup 'RACDG' does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-27140: attach to post/wait installation failed

  ORA-27300: OS dependent operating system: invalid_egid failed with status: 1

  ORA-27301: OS Error Message: operation not permitted

  ORA-27302: an error occurred at: skgpwinit6

  ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)

  ORA-00210: could not open the specified control file

  ORA-00202: control file: "+ RACDG/rac/controlfiles/control01.ctl".

  ORA-17503: ksfdopn:2 could not open the file +RACDG/rac/controlfiles/control01.ctl

  ORA-15001: diskgroup 'RACDG' does not exist or is not mounted

  ORA-15055: unable to connect to the ASM instance

  ORA-27140: attach to post/wait installation failed

  ORA-27300: OS dependent operating system: invalid_egid failed with status: 1

  ORA-27301: OS Error Message: operation not permitted

  ORA-27302: an error occurred at: skgpwinit6

  ORA-27303: additional information: current startup egid = 500 (oinstall), egid = 503 (asmadmin)

  But my ASM instance is running and I am able to see the controlfiles.

  State Type sector Rebal to Total_MB Free_MB Req_mir_free_MB Usable_file_MB Offline_disks Voting_files name of the block

  EXTERN MOUNTED N 512 4096 1048576 20472 13772 0 13772 0 N RACDG.

  I don't know is there any problem of perission. Oracle cluster and DB is running as user 'oracle '.

  Nobody does face this problem before? Let me know where to check this error.

  Kind regards

  007

  Hello

  Check "the correct permission must be" - rwsr - s - x '.»»»

  Stop the CRS.
  Change the permissions of the file to GI_HOME/bin/oracle for "- rwsr - s - x":

  $su - grid
  $cd GI_HOME/bin
  $chmod 6751 oracle
  Oracle-l $ls

  Start the /CRS.

  Start your database.

  Thank you

  Sundar

• "Out of the race" begins "inside."

  By going to layer/Style/Style Settings/race... the small box says 'outside'... but if you try to add the racing, it is set inside.  If you change the box to 'inside', then back to 'outside', then it works.  But getting to that, even if the box says 'outside', it is actually 'inside '.  Is there a fix for that so it would actually start as 'outside '?

  Thank you, Doug

  I think this is a bug in ESP 13 and 14 and I remember well he pointed out before, but you can report it here

  and see what adobe says. Several adobe employees seem to respond to questions about photoshop.com here.

  https://feedback.Photoshop.com/photoshop_family/topics

• First race in call loops

  I use 2 timed loop and a while loop in the same case statement.  When I called the case the first time, it runs as expected.  However, when I call the case subsequent times, the loops initially timed races and has indicated that there is an end loop error.  I have both set Timed loops (and they need to stay attached to) deal with cases not, ignore the phase.  Also, I have two timed loop on an offset from the beginning of the case.

  If I change to throw cases not the racing goes, but I need to treat the case No.

  Any suggestions on how to get rid of the initial of the race.

  I'm using labview 8.6.1.

  I solved the problem.  It should have been obvious.  I had 2 periods loops and previously I using independent sources.  To fix it, I wired the same source of synchronization in two of them and erased the source of synchronization once data collection was completed.  Now when I active loops periods several times, I do not start with a block of timed loop errors.

• "No route to host" network problem preventing the installation of RAC

  Oracle Linux: 6.6

  Version Infra grid: 11.2.0.4

  Virtual Box: 4.3.28 (on the Win 7 machine)

  I am installing a RAC 2 nodes in virtual machines created in VirtualBox. But the check cluvfy is a failure for the networks of my Public and private with the error "No route to host" as shown below.

  Ping between two nodes of work with no latency. without password ssh is configured successfully.

  I have a server dedicated DNS (10.194.135.185). nslookups SCAN, Public and VIPs are working properly.

  Search on Google didn't help much. That's why post here

  = The beginning of cluvfy error

  Check: The subnet '10.194.135.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 10.194.135.178 brcpda178: 10.194.135.178 spent

  brcpda179: 10.194.135.179 brcpda178: 10.194.135.178 spent

  brcpda178: 10.194.135.178 brcpda179: 10.194.135.179 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 10.194.135.179 brcpda179: 10.194.135.179 spent

  Result: The TCP connectivity test failed for subnet "10.194.135.0."

  Check: Subnet node connectivity "169.182.16.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178 [169.182.16.24] brcpda179 [169.182.16.25] Yes

  Result: Connectivity node passed to subnet "169.182.16.0" with one or more nodes brcpda178, brcpda179

  Check: The subnet '169.182.16.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 169.182.16.24 brcpda178: 169.182.16.24 spent

  brcpda179: 169.182.16.25 brcpda178: 169.182.16.24 spent

  brcpda178: 169.182.16.24 brcpda179: 169.182.16.25 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 169.182.16.25 brcpda179: 169.182.16.25 spent

  Result: The TCP connectivity test failed for subnet "169.182.16.0."

  = End of the error

  # This is my network configuration.

  I created 2 virtual adapters to host (Host-only network).

  ipconfig output host (Windows 7)

  Network adapter Ethernet VirtualBox:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::7930:46e8:a531:289% 24

  IPv4 address...: 10.194.135.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  Adapter Ethernet VirtualBox network #2:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::b43f:3255:b3d0:70eb 30%

  IPv4 address...: 169.182.16.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  10.194.135.0 is my Public network-> eth0 in each node

  169.182.16.0 is my private network-> eth1 in each node

  Here is my file/etc/hosts

  [grid@brcpda178 grid] $ cat/etc/hosts

  10.194.135.185 dnsnode185

  # Public IP #.

  10.194.135.178 brcpda178.testenv.com brcpda178

  10.194.135.179 brcpda179.testenv.com brcpda179

  # Private IP #.

  169.182.16.24 brcpda178 - priv.testenv.com brcpda178-priv

  169.182.16.25 brcpda179 - priv.testenv.com brcpda179-priv

  # Virtual IP # 3

  10.194.135.217 brcpda178 - oravip.testenv.com brcpda178-oravip

  10.194.135.218 brcpda179 - oravip.testenv.com brcpda179-oravip

  #127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  #: 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Here's the network interfaces configuration files in each RAC node.

  Value of GATEWAY in the file/etc/sysconfig/network-scripts/ifcfg-ethn is set to the IP address of the virtual NIC adapter to the host (win7).

  On Node1, node2 has been cloned. Thus, the UUID of eth0 and eth1 remains the same for both nodes. Hope that this is not a problem because HWADDR (MAC ID) is different between the nodes.

  brcpda178 (Node1)

  eth0

  =====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:17:91:24

  IPADDR = 10.194.135.178

  PREFIX = 24

  GATEWAY =10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:01:FC:38

  IPADDR = 169.182.16.24

  PREFIX = 24

  GATEWAY =169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  brcpda179 (Node2)

  eth0

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:A9:68:39

  IPADDR = 10.194.135.179

  PREFIX = 24

  GATEWAY = 10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:05:A5:45

  IPADDR = 169.182.16.25

  PREFIX = 24

  GATEWAY = 169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  Hello

  This error is usually done to firewall or selinux - but since you have already disabled, I recommend you just do a restart of your two virtual machines as I have explained these mistakes here http://salmandba.blogspot.sg/2015/04/using-cluster-verification-utility.htm

  I also believe that you have also disabled Firewall (not only stopped) by using the command «chkconfig iptables» off
  My installation guide 12 c RAC excavation on Linux 6 Treaty of all the prerequisites that are almost the same for the 11 g RAC installation, please check if you have met all the requirements.

  http://salmandba.blogspot.SG/2015/05/installing-Oracle-12C-RAC-on-Linux-6.html

  Salman

• restart the installation of RAC

  Hi guys,.

  I met an installation problem when I try to install RAC on vmware with adatpter on a laptop microsoft loopback.

  After properly installing the grid infrastructure, stop down all nodes (machine VM), I intend to continue the next day.

  and now I begin to continue the installation, when I start to install the database software and don't find that there no selection of nodes

  options for me to choose.

  

  the database and the grid version is: 11.2.0.4

  the operating system is: CentOS6.5 - x86_64

  and I'm also going to check some status values:

  [root@rac1 ~] # / u01/app/grid/bin/crsctl start cluster - all CRS-4690: Oracle Clusterware is already running on "rac1. CRS-4690: Oracle Clusterware is already running on "rac2. CRS-4000: Start command has failed, or completed with errors.

  [root@rac1 ~] # / u01/app/grid/bin/crsctl State Server NAME = rac1 STATUS = ONLINE NAME = rac2 STATUS = ONLINE

  [grid@rac2 ~] $ srvctl status nodeapps Rac1-vip VIP is enabled Rac1-vip VIP is running on the node: rac1 Rac2-vip VIP is enabled Rac2-vip VIP is running on the node: rac2 Network is enabled Network runs on the node: rac1 Network runs on the node: rac2 GSD is disabled GSD is not running on the node: rac1 GSD is not running on the node: rac2 ONS is enabled The ONS daemon is running on the node: rac1 The ONS daemon is running on the node: rac2

  ./runcluvfy.sh step - hwos post - rac1, rac2-verbose > > chk.log

  ...

  ....

  Post-audit for hardware and operating system configuration was successful.

  
  

  
  

  post it here

  $ id : wherever you are Installer Oracle RDBMS runing

  $ id

  $ cat /etc/oraInst.loc | grep inventory_loc

  for example. inventory_loc = / u01/grid/oraInventory

  $ cat /u01/grid/oraInventory/ContentsXML/inventory.xml

• lsnrctl reload for RAC

  Hi all

  I had a problem when using db CARS. I tried to get the status of the listener after I reload it. And I get the error

  [oracle@aie-45-215 ~] $ lsnrctl reload LISTENER

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production June 1, 2015 19:33:57

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  The command completed successfully

  [oracle@aie-45-215 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production June 1, 2015 19:29:16

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  AMT-12541: TNS:no listener

  AMT-12560: TNS:protocol adapter error

  AMT-00511: no listener

  Linux error: 111: connection refused

  If I stop and restart the listener, then it works again.

  [oracle@aie-45-215 ~] srvctl stop listener $

  [oracle@aie-45-215 ~] $ srvctl start listener

  [oracle@aie-45-215 ~] $ lsnrctl status

  LSNRCTL for Linux: Version 11.2.0.4.0 - Production June 1, 2015 19:34:39

  Copyright (c) 1991, 2013, Oracle.  All rights reserved.

  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))

  STATUS of the LISTENER

  ------------------------

  Alias LISTENER

  Version TNSLSNR for Linux: Version 11.2.0.4.0 - Production

  Beginning June 1, 2015 19:34:33

  Uptime 0 days 0 h 0 min 6 sec

  Draw level off

  Security ON: OS Local Authentication

  SNMP OFF

  Parameter Listener of the /u01/app/11.2.0/grid/network/admin/listener.ora file

  The listener log file /U01/app/Oracle/diag/tnslsnr/AIE-45-215/listener/alert/log.XML

  Summary of endpoints listening...

  (DESCRIPTION = (ADDRESS = (PROTOCOL = ipc) (KEY = LISTENER)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.80.45.215) (PORT = 1521)))

  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=10.80.45.225) (PORT = 1521)))

  Summary of services...

  "Rone" service has 1 instance (s).

  'Rone1' instance, State LOAN, has 1 operation for this service...

  Service 'roneXDB' has 1 instance (s).

  'Rone1' instance, State LOAN, has 1 operation for this service...

  The command completed successfully

  Here's what the listener.ora

  [oracle@aie-45-215 ~] $ cat /u01/app/11.2.0/grid/network/admin/listener.ora

  Listener = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = Listener))) # line added by Agent

  LISTENER_SCAN1 = (Description = (ADDRESS_LIST = (Address = (Protocol = IPC) (Key = LISTENER_SCAN1))) # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER_SCAN1 = ON # line added by Agent

  ENABLE_GLOBAL_DYNAMIC_ENDPOINT_LISTENER = ON # line added by Agent

  So "lsnrctl reload" should not used for RAC environment or I used by mistake?

  Liz

  Node VIP and public IP address of the node, the two IP will be exist for the listener node. Check the status of the listener without changing anything. You will see the listener with both the PPE

  $GRID_HOME/bin/lsnrctl State AUDITOR

• Understanding RAC

  Hi guys

  I'm new to PAP,

  I went through the documents of oracle RAC, I still confused

  Please explain the following terms/queries

  1. Node
  2. Cluster
  3. Resources
  4. CRS
  5. Server pool
  6. If I have two nodes, I'd have two or three servers... 2 servers to 2 nodes and a database server
  7. importance of the crsctl and srvctl
     

  Thanks in advance

  Rakesh

  This is the complete detail for Clusterware installation - your confusion is common.  2 days guides assume less prior knowledge and begin with the basic concepts.  Detailed installation guide more deeply into the details.

• root.sh failed on rac node problem grid infrastructure 11 GR 2

  Hi all

  
  I am about to install 11 g (11.2.0.1) grid infrastructure on Linux racnode1.orasol.com 2.6.18 - 128.el5PAE #1 SMP Wed Jan 21 08:28:04 EDT 2009 i686 i686 i386 GNU/Linux 32-bit where I use the platform VMware VMware 10 of 2008. I'm sure I followed the installation instructions, but I can't get rid of the following error that occurs while I run the root.sh script. on the first node.

  Maybe this is a known problem or can anyone request includes what grid infrastructure. Thanks for any effort.

  
  

  [root@racnode1 OraInstall2014-03-15_02-12-11 PM] # /u01/app/11.2.0/grid/root.sh

  Run the script root.sh from Oracle 11 g...

  The following environment variables are defined as:

  ORACLE_OWNER = ora11g

  ORACLE_HOME = /u01/app/11.2.0/grid

  Enter the full path of the local bin directory: [/ usr/local/bin]:

  Copying dbhome to usr...

  Copying oraenv to usr...

  Copying coraenv to usr...

  Creating/etc/oratab file...

  Entries will be added to the/etc/oratab file according to the needs of

  Assistant configuration database when a database is created

  Finished to turn the generic part of the root.sh script.

  Now root product-specific actions will be performed.

  2014-03-15 15:39:58: the analysis of the host name

  2014-03-15 15:39:58: verification of superuser privileges

  2014-03-15 15:39:58: user has superuser privileges

  The file of configuration settings using: /u01/app/11.2.0/grid/crs/install/crsconfig_params

  Create the trace directory

  ADD LOCAL MODE

  Creating OCR keys for the user "root", "root"... privgrp

  Successful operation.

  portfolio of root

  root cert portfolio

  export certificate root

  portfolio for peer

  Pocket player profile

  portfolio of PA

  portfolio peer keys

  portfolio PA keys

  cert request peer

  PA cert request

  CERT peer

  CERT PA

  peer TP root cert

  CERT of profile TP root drive

  PA TP root cert

  CERT of peers pa TP

  CERT of peers PA TP

  CERT of pa TP player profile

  profile peer player TP CERT

  CERT user peer

  CERT user PA

  Adding to inittab demon

  CRS-4123: Oracle high availability Services started.

  starts ohasd

  CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.

  CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded

  CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.

  CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.

  CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.

  CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded

  CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded

  ASM created and launched successfully.

  DATA DiskGroup created successfully.

  clscfg:-install the specified mode

  Successfully accumulated necessary OCR keys.

  Creating OCR keys for the user "root", "root"... privgrp

  Successful operation.

  CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded

  CRS-4256: profile update

  Successfully added to disk 88720477d0534f9fbf3b74c2f0ac8b46 to vote.

  Managed to replace voting disk group with + DATA.

  CRS-4256: profile update

  CRS-4266: Vote or managed to replace the files

  # File group universal name Id disk STATE file

  --  -----    -----------------                --------- ---------

  1. online 88720477d0534f9fbf3b74c2f0ac8b46 (/ dev/oracleasm/disks/ASMDISK1) [DATA]

  Located at 1 vote (s) disk.

  CRS-2673: attempt to stop 'ora.crsd' on 'racnode1 '.

  CRS-2677: stop 'ora.crsd' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.asm' on 'racnode1 '.

  CRS-2677: stop 'ora.asm' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.ctssd' on 'racnode1 '.

  CRS-2677: stop 'ora.ctssd' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.cssdmonitor' on 'racnode1 '.

  CRS-2677: stop 'ora.cssdmonitor' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.cssd' on 'racnode1 '.

  CRS-2677: stop 'ora.cssd' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.gpnpd' on 'racnode1 '.

  CRS-2677: stop 'ora.gpnpd' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.gipcd' on 'racnode1 '.

  CRS-2677: stop 'ora.gipcd' on 'racnode1' succeeded

  CRS-2673: attempt to stop 'ora.mdnsd' on 'racnode1 '.

  CRS-2677: stop 'ora.mdnsd' on 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.mdnsd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.mdnsd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.gipcd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.gipcd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.gpnpd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.gpnpd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.cssdmonitor' on 'racnode1 '.

  CRS-2676: beginning of 'ora.cssdmonitor', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.cssd' on 'racnode1 '.

  CRS-2672: attempt to start 'ora.diskmon' on 'racnode1 '.

  CRS-2676: beginning of 'ora.diskmon', 'racnode1' succeeded

  CRS-2676: beginning of 'ora.cssd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.ctssd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.ctssd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.asm' on 'racnode1 '.

  CRS-2676: beginning of 'ora.asm', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.crsd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.crsd', 'racnode1' succeeded

  CRS-2672: attempt to start 'ora.evmd' on 'racnode1 '.

  CRS-2676: beginning of 'ora.evmd', 'racnode1' succeeded

  CRS-0184: unable to communicate with the demon of the CRS.

  RPRC-1070: could not verify if the ora.asm resource is registered

  Cannot communicate with crsd

  Add asm... failed

  clsr_start_dg returns error to loc: 70 rc = 0

  CRS-4535: cannot communicate with Cluster Ready Services

  CRS-4000: Create command has failed, or completed with errors.

  create diskgroup DATA... failed

  CRS-4535: cannot communicate with Cluster Ready Services

  CRS-4000: added command failed, or completed with errors.

  Return code of 1 (256) of control: /u01/app/11.2.0/grid/bin/crsctl add type basetype - files ora.local_resource.type-/u01/app/11.2.0/grid/crs/template/registry.acfs.type ora.registry.acfs.type

  Add ora.registry.acfs.type... failed

  RPRC-1070: could not verify if the ora.net1.network resource is registered

  Cannot communicate with crsd

  Add scan = rac - scan.orasol.com... failed

  Configure Grid Infrastructure for a Cluster Oracle... failed

  Update the inventory of properties for clusterware

  From Oracle Universal Installer...

  Check the swap space: must be greater than 500 MB.   Real 4996 MB passed

  The pointer of the inventory is to /etc/oraInst.loc

  The inventory is located at/u01/app/oraInventory

  'UpdateNodeList' succeeded.

  
  

  
  

  [root@racnode1 oraagent_ora11g] # cat oraagent_ora11g.log > > > > > > >

  Oracle Database 11g Clusterware Release 11.2.0.1.0 - Production Copyright 1996, 2009 Oracle. All rights reserved.

  2014-03-22 22:04:43.702: [AGENT] [3045107408] ENV level Logging for Module: 1 AGENT

  2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: AGFW 0

  2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSFRAME 0

  2014-03-22 22:04:43.704: record level of ENV [AGENT] [3045107408] for the Module: CLSVER 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CLUCLS 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMCRS 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: COMMNS 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSAPP 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCCL 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCEVT 0

  2014-03-22 22:04:43.705: record level of ENV [AGENT] [3045107408] for the Module: CRSCOMM 0

  2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSD 0

  2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSEVT 0

  2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSMAIN 0

  2014-03-22 22:04:43.706: record level of ENV [AGENT] [3045107408] for the Module: CRSOCR 0

  2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPE 0

  2014-03-22 22:04:43.706: [AGENT] [3045107408] ENV level Logging for Module: CRSPLACE 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRES 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRPT 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSRTI 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSE 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSSEC 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSTIMER 0

  2014-03-22 22:04:43.707: record level of ENV [AGENT] [3045107408] for the Module: CRSUI 0

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: CSSCLNT 0

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRAPI 1

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRASM 1

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCAC 1

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRCLI 1

  2014-03-22 22:04:43.708: record level of ENV [AGENT] [3045107408] for the Module: OCRMAS 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRMSG 1

  2014-03-22 22:04:43.709: [AGENT] [3045107408] ENV level Logging for Module: OCROSD 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRRAW 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRSRV 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: OCRUTL 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: SuiteTes 1

  2014-03-22 22:04:43.709: record level of ENV [AGENT] [3045107408] for the Module: UiServer 0

  2014-03-22 22:04:43.710: [AGFW] [3045107408] starting agent: /u01/app/11.2.0/grid/log/racnode1/agent/crsd/oraagent_ora11g/

  2014-03-22 22:04:43.711: framework Agent [AGENT] [3045107408] initialized, process Id = 6506

  2014-03-22 22:04:43.876: /u01/app/11.2.0/grid crsHome Utils::getCrsHome [USRTHRD] [3045107408]

  2014-03-22 22:04:43.878: [USRTHRD] [3045107408] Process::convertPidToString pid = 6506

  2014-03-22 22:04:43.884: [CLSFRAME] [3045107408] Inited lsf context 0xadf9fc8

  2014-03-22 22:04:43.885: [CLSFRAME] [3045107408] Initing CLS framework messaging

  2014-03-22 22:04:43.887: State of new framework [CLSFRAME] [3045107408]: 2

  2014-03-22 22:04:43.887: [CLSFRAME] [3045107408] M2M begins...

  2014-03-22 22:04:43.904: [CRSCOMM] [3045107408] m_pClscCtx = 0xadfccb8m_pUgblm = 0xae00318

  2014-03-22 22:04:43.905: [CRSCOMM] [3045107408] start send thread

  2014-03-22 22:04:43.907: [CRSCOMM] [3010943888] clsIpc: sendWork thread started.

  2014-03-22 22:04:44.325: clsc_connect [COMMCRS] [3044768656]: (0xaeeda00) no listener to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11))

  2014-03-22 22:04:44.326: [CRSCOMM] [3045107408] [FFAIL] failed to connect to (ADDRESS = (PROTOCOL = IPC) (KEY = CRSD_IPC_SOCKET_11)) ret = 9

  2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failure to the CPI to connect to the server: 2

  2014-03-22 22:04:44.326: [CLSFRAME] [3045107408] failed to start - intermodules comms: 1

  2014-03-22 22:04:44.330: [AGFW] [3045107408] alert creation: (: CRSAGF00120 :): Agent Framework could not be started: 1).

  2014-03-22 22:04:44.330: gipcShutdownF [GIPCXCPT] [3045107408]: jumping stop, count 1, of [clsnOraAgent.cpp: 82], ret gipcretSuccess (0)

  2014-03-22 22:04:44.339: [AGFW] [3045107408] Agent comes out with exit code: 1

  Hi Vandana,

  Thanks for your time.

  I commented the line on which the IP 127.0.0.1 is shown in/etc/hosts on all nodes.

  file/etc/hosts is same nodes.when I do a ping to the public ip address, it is show the IP local hots i'e 127.0.0.1 not the real that I craved in the file/etc/hosts.

  After that I comment that line of hole and he ping is resolved.

  Regrads,

  Malik Tanveer

• ORA-15003 diskgroup already mounted another lock name space - 11g RAC using VMware shared disks

  Hi all

  I try to install Oracle RAC 11 g 2 on 2 machines OEL5 with VM disks shared as a shared disc ASM storage.

  I am faced with getting the following error when running root.sh on the second node.

  Create DiskGroup CRS failed with the following message is displayed:

  ORA-15018: diskgroup cannot be created.

  ORA-15017: diskgroup "CRS" can not be mounted.

  ORA-15003: diskgroup "CRS" already mounted in a different namespace locking

  Configuration of ASM failed, read newspapers files for more details

  Succssfully not configure and start ASM

  CRS-2500: Can not stop resource 'ora.crsd' as it is not executed

  CRS-4000: Stop command failed, or completed with errors.

  Return code of 1 (256) control command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd - init

  Stop resource ' ora.crsd - init ' failed

  Cannot stop CRSD

  Here's what I found in the Setup log:

  2014-02-19 09:42:12: mark for CSS existing voting records

  2014-02-19 09:42:12: the initial configuration for cluster performance

  2014-02-19 09:42:13: beginning of the resource ' ora.ctssd - init ' succeeded

  2014-02-19 09:42:13: configuration ASM via ASMCA

  2014-02-19 09:42:14: execution as the grid: /u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - diskList ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 - NORMAL redundancy - configureL

  ocalASM

  2014-02-19 09:42:14: running as user grid: /u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 diskList - redundancy NORMAL configuration.

  reLocalASM

  2014-02-19 09:42:14: citing "/u01/app/11.2.0/grid/bin/asmca-silencieux diskGroupName - CRS - diskList ORCL:CRS1, ORCL:CRS3, ORCL:CRS2 - NORMAL redundancy - configureLocalASM.

  «as user «grid «»

  2014-02-19 09:42:47: ASM configuration failed, read newspapers files for more details

  2014-02-19 09:42:47: not succssfully configure and start the ASM

  2014-02-19 09:42:47: exclusive mode output

  2014-02-19 09:42:47: 1 (256) command return code of command: /u01/app/11.2.0/grid/bin/crsctl stop resource ora.crsd - init

  2014-02-19 09:42:47: stop resource ' ora.crsd - init ' failed

  2014-02-19 09:42:47: cannot stop CRSD

  2014-02-19 09:43:34: failure of the initial cluster configuration.  See /u01/app/11.2.0/grid/cfgtoollogs/crsconfig/rootcrs_rac2.log for more details

  I run root.sh on the second node only after finished on the first node.

  In terms of VMware configuration, I've marked the disk.locking = "FALSE".

  It is obvious that the diskgroup CRS would be already mounted by the first node. DiskGroup "CRS" already mounted in a different namespace locking

  There is a that lock_name_space initialization parameter related to this, but that should be resolved by the YES itself the installation of clusterware/asm.

  Any help is welcome.

  Let know what would help more information

  Concerning

  stupid stupid control...

  had set ORACLE_SID as + ASM1 on both nodes.

  Set to + ASM2 on the second node and ran new facility...

  went like a breeze...

  I heard that it can also happen if the sys-network-config is not set correctly.

  for example. both machines using the same name, say rac1... NOT TESTED...

  It is very easy to miss one or two things with the help of VMware machine cloning.

  I have a list of such things

  Bravo!

• Steps to upgrade spirit RAC Standby Database?

  Hi all

  I RAC environment with 8 knots (4 Linux) I have a knot like physical standby for this CAR.

  My oracle is 10.2.0.3, and I want to update 10.2.0.5

  Could you advice I do not like, when I googled I found that I must begin by Clusterware before then?

  Any recommendation?

  Thanks in advance.

  Hello

  If you follow the second link I posted, all necessary measures are there, even if you have some CARS, it is explained here. Take a look at chapter "B.2 upgrade Oracle database with a physical Standby Database in Place", and if you have any questions post here.

  ARM