restart the installation of RAC

Similar Questions

• Installation installation of Win Vista Home premium error Windows errors can not reset the deployment engine. to install windows, restart the installation.

  Original title: Error Installing Win Vista Home premium.

  I have a PC with Windows Vista Home Premium.  Suddenly, it wouldn't start.  I changed the boot CD ROM and put my Vista disc in and tried to do a "repair" that it came with missing engine or something like this.  After several attempts, I gave up and formatted hard drive losing all my data and programs (rather difficult to backup files when the computer does not start).  So, I tried a complete installation.  I put in the license code and he started the installation.  After a few minutes, the message came;  "Windows Setup could not reset the deployment engine.  to install windows, restart the installation.  I tried several times including completely turn off the computer for several minutes and try again.  I tried several times.  I thought oh well, I will install my Windows 7 program (this and never used).  Error on this installation was: your CPU is only good for 32 bit and Win 7 I have is a 64-bit version.  I'D RATHER INSTALL VISTA BUT need help on the error regarding the deployment engine.  Thank you, Lloyd

  Hello

  See if this solution works for you:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_install/Windows-Setup-could-not-reinitialize-the/f9e6f3e6-EA80-487F-8d86-36c793f7c152

  See you soon.

• START WINDOWS VISTA ERROR "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation.

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  I have a portable Gateway that will not start, but rather when I turn on the laptop, it gives me a box of caption read "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click "OK" to restart the computer, and restart the installation. I bought the recovery CD gateway and even made the recovery discs offered by Microsoft, but nothing helped. Or recovery CD were no help. I am running Windows Vista. Any suggestions?

  Hey PeLon416

  If you have problems with the gateway recovery process, you will need to contact Gateway

  It's their recovery process not microsofts

  You may have a hardware problem

  support of bridge at the link below

  http://support.gateway.com/support/default.aspx

  Walter, the time zone traveller

• Windows Vista - after the RESTORE partition HARD drive: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  Hello

  I have WINDOWS VISTA and just tried to reinstall my laptop of restoration on a HARD disk partition.

  The restore went through, but then I got the error: WINDOWS COULD NOT COMPLETE the INSTALLATION. TO INSTALL WINDOWS ON THIS COMPUTER, RESTART THE INSTALLATION

  When I press 'OK' (which is the only option), it tries to start again, until I get the same error through the black screen.

  How can I get out of this loop please?

  Thank you.

  Lucie

  Hello

  For any problem with the help of the recovery Partition that has been copied to the hard disk by the computer manufacturer, you must contact them.

  This recovery process is the manufacturer, not Microsoft.

  ________________________________________________

  You never told us why you wanted to do a restore. If you had serious errors and the recovery process does not work, you will have hardware problems. BUT we're only guessing at this stage due to lack of information to help you.

  See you soon.

• Windows could not complete the installation. To install Windows on this computer, restart the installation

  Decided to reinstall Vista business after that my lenovo x 200 could not start. After you have reinstalled, had to restart and now it appears

  "Windows is unable to complete the installation. To install Windows on this computer, restart the installation.
  How should I solve this problem?

  Hello

  1. may I know the exact error you received during initialization failed prior to relocation?

  2. do you know the exact reason for the failure of start?

  I will be asked to get in touch with the manufacturer of the system on this issue.

  Installation and reinstallation of Windows Vista, you can fallow the article below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/installing-and-reinstalling-Windows-Vista#section_3

• Unable to complete the installation of windows vista, error message "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation.

  I'm install windows vista Ultimate edition in my new laptop, but during the installation stage 'completion', the prompt message as "Windows cannot configure one or more system components to install Windows, restart the computer, and restart the installation", but my new laptop was no install any OS before, please help

  tan7655,
  If I read this correctly, you have a portable computer that do not have an operating system on it.  You try to install Vista and get the error.
  You've restarted the Vista installation?  So then you get the same error? If you have tried to install more than once and continue to receive this error, check that the laptop is capable of Vista?  You may need to check with the manufacturer of the laptop to see if it is able to support Vista. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D,.

  IM TRYING to re - INSTALL WINDOWS VISTA ON MY T-6321 to the front door, BUT WHEN I INSERT THE DISC, AND INSTALL, a MESSAGE APPEARS SAYING: WINDOWS cannot OPEN THE FILE D:\Sources\Install.wim REQUIERED. Make sure that all required files for installation aare available and restart the installation. Error code: 0x8007000D, SHOULD ALL BE ON THE DISCALREADY?

  Hi JRCLNSIN100,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         What is the disk you use to reinstall?

  ·         Is this a recovery or reinstalling the disc you are using?

  ·         When exactly do you get this error message?

  ·         What is the edition of Windows Vista, you try to install?

  ·         How old is the drive that you are using?

  ·         How are you starting the installation process?

  After researching the error 0x8007000D code is essentially due to file corruption and a problem with the drive itself.

  First check if you have scratches or dust on the disc and clean the surface and try again.

  To check if the disk is wrong, you will need to copy the contents of the DVD to the hard drive and try to install using that.

  To perform a flat installation of Windows Vista, follow these steps.

  Note The hard disk must have at least 3 GB of free space on the disk for the Windows Vista installation files. The hard disk must have at least 15 GB of additional disk space to install Windows Vista. For more information about system requirements for Windows Vista, see the Microsoft Web site at the following address:

  http://www.Microsoft.com/Windows/products/windowsvista/editions/SystemRequirements.mspx

  1. Insert the Windows Vista installation disc.
  2. Start Windows Explorer.
  3. In Windows Explorer, click to select the drive for the Windows Vista installation disc.
  4. On the Edit menu, click select all.
  5. On the Edit menu, click copy.
  6. Click to select the hard disk you want to contain the flat installation files.
  7. On the file menu, point to new, click the folder, type Windows Vista Setupand then press ENTER.
  8. Double-click the Windows Vista Setup program, and then click Paste on the Edit menu.
  9. Double-click Setup.exe, and then follow the instructions that appear.

  See the link below for more information on flat installation.

  How to perform a flat installation of Windows Vista

  http://support.Microsoft.com/kb/928902

  This problem can also occur if the firmware of the DVD drive is defective or obsolete.

  If the step above does not resolve the question suggests that you install the latest drivers for the DVD player on the computer.

  For more information please visit the link below.

  Error message when you try to install Windows Vista by using the DVD drive on the computer: "Windows cannot install required files".

  http://support.Microsoft.com/kb/930984

  Hope this information is useful.

  Let me know if it worked.

  All the best!

  Thanks and greetings

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows vista installation interrupted, click OK to restart the computer, and then restart the installation

  I was doing a reformat of the factory for windows vista on the laptop of my son (packard bell EasyNote LJ 65) when the battery is dead and the computer turned off. When I started it back up it gives the message: the computer restarted unexpectedly or encountered an unexpected error. Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation.
  Everything I try, I get no further than this message, I don't know where to go to continue the installation. The computer does not see that the installation was not completed. I tried to enter the menu with F9 where I had to do the reformatting of the factory of windows but it will not give me the option to continue installation, it shows just the vista Windows, but when I click brings back me to the error message
  Help, please!

  http://support.PackardBell.com/UK/

  For questions about the recovery process, contact the manufacturer of the computer.

  This isn't their recovery process, Microsoft.

  See you soon. Mick Murphy - Microsoft partner

• PC separations with 0xc01a001d after restarting the installation of SP1

  Help please! I installed Vista service pack 1 last nyt via windows update and after installation to restart received the following message;

  PC stops with 0xc01a001d after restarting the installation of SP1... system proven recovery and system restore but nothing helped! I am now reinstall visat using the recovery CD, but will have lost all the data, not great! Why has this happened? I am now very reluctant to reinstall SP1 don't want another weekend busy trying to re-vive my laptop!

  Please advise...

  Thank you!

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. "The error code is:"0xE0000 100. "

  My antivirus and windows firewall was also automatically disabled and I was not able tun back on

  So, I tried to reinstall the windows operating system 7, but when I try to install, I get an error saying:

  Windows installation encountered an unexpected error. Check that the installation sources are accessible and restart the installation. »

  The error code is: "0xE0000 100."

  I think that some virus or malware is rampant in my installation of windows system. So, I want to know there is a way to solve this problem...

  Ideas or suggestions that anyone has would be greatly appreciated!

  Thank you!

  See if this post has resolved your problem: http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/error-code-oxe000100-windows-installation/aea498e2-09c3-43aa-bfa5-c06e68b1ea0c

  J W Stuart: http://www.pagestart.com

• Error "Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "When you try to install Windows.

  How can I configure my windows 7 after restoring my laptop to the factory conditians?

  My laptop had a blue screen and I couldn't get rid of it, I went into safe mode and restore my computer to factory conditions. When the computer says "the installation program starts services" you stop and I couldn't turn it back on for 15 minutes. When I turned on and tried to contained my setup, a message keeps poping up "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install windows, click ok to restart the computer, and then restart the installation. "But no mader, how many times I reboot my laptop, the same message appears. What should I do? I've restored my computer several times and never had this problem.

  You should try another recovery.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

• Windows 8 upgrade retains fault make sure all files required for installation are available, and restart the installation. Error code: 0x8007025D

  Hello

  Like so many others, I am fighting to get 8 upgraded windows. I have tried all the methods mentioned upgrade

  on the forums without success. I have greated iso dvd, tried to use the USB and the installation of office.

  Error: Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]

  The error logs:

  Setupact.txt

  2012-11-04 01:02:27, MoveOldOSFiles IBS Info [0x0600a6]: got through [C:\Windows\] to [C:\Windows.old\Windows\]
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEArchiveOldWindowsFoldersDoneCheckpoint") current...
  2012-11-04 01:02:27, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEArchiveOldWindowsFoldersDoneCheckpoint' have been correctly set up.
  2012-11-04 01:02:27, info [0x06412c] IBSLIB SetCheckpoint: Checkpoint ("WinPEImageApplyReadyCheckpoint") current...
  2012-11-04 01:02:28, info [0x06412e] IBSLIB SetCheckpoint: Checkpoint 'WinPEImageApplyReadyCheckpoint' have been correctly set up.
  2012-11-04 01:02:28, info [0x06009e] IBS DeployWIMImage:Calling IDepWIMImageResolved::Apply...
  2012-11-04 01:02:28, info [0x0606cc] IBS calling WIMApplyImage (flags = 0 x 180)...
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:36, ApplyWIMCallback IBS Info [0x0600ae]: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:37, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the file [C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS Info [0x0600ae] ApplyWIMCallback: a new attempt on the record [offset 0000000075fdfa0a, length 1526856] RULE is [605]
  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]
  2012-11-04 01:08:42, PublishCriticalError IBSLIB Info: publish error message critical [Windows cannot install required files. Make sure all files required for installation are available, and restart the installation. [Error code: 0x8007025D]
  2012-11-04 01:08:42, info [0x0a013d] UI accept Cancel. Leaving the Page's progress.
  2012-11-04 01:08:42, info UI entering Page Cancel.

  Setuperr.txt

  2012-11-04 01:08:41, IBS error [0x0600af] ApplyWIMCallback: error application C:\Windows\WinSxS\amd64_nv_lh.inf_31bf3856ad364e35_6.2.9200.16384_none_473133365499807b\nvlddmkm.sys. RULE [605] [gle = 0x0000025d]
  2012-11-04 01:08:41, error [0x0606cc] IBS WIMApplyImage failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0x0600a1] IBS DeployImage:Image request failed; HR = 0x8007025D [gle = 0x0000025d]
  2012-11-04 01:08:42, error [0 x 060082] IBS Callback_ImageTransfer: unable to set the OS image. HR = 0x8007025d [gle = 0x0000025d]

  Any help will be greatly appreciated.

  Thank you for all the answers. Finally managed to get installed it. Download 4 times. Whenever he stopped at different percentages, so I expected the download is corrupt. Finally in the format of my other readers, installed windows 7 on it and then downloaded windows 8. Finally, it worked. Had to be something with my player.

  Thanks again.

• "No route to host" network problem preventing the installation of RAC

  Oracle Linux: 6.6

  Version Infra grid: 11.2.0.4

  Virtual Box: 4.3.28 (on the Win 7 machine)

  I am installing a RAC 2 nodes in virtual machines created in VirtualBox. But the check cluvfy is a failure for the networks of my Public and private with the error "No route to host" as shown below.

  Ping between two nodes of work with no latency. without password ssh is configured successfully.

  I have a server dedicated DNS (10.194.135.185). nslookups SCAN, Public and VIPs are working properly.

  Search on Google didn't help much. That's why post here

  = The beginning of cluvfy error

  Check: The subnet '10.194.135.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 10.194.135.178 brcpda178: 10.194.135.178 spent

  brcpda179: 10.194.135.179 brcpda178: 10.194.135.178 spent

  brcpda178: 10.194.135.178 brcpda179: 10.194.135.179 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 10.194.135.179 brcpda179: 10.194.135.179 spent

  Result: The TCP connectivity test failed for subnet "10.194.135.0."

  Check: Subnet node connectivity "169.182.16.0."

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178 [169.182.16.24] brcpda179 [169.182.16.25] Yes

  Result: Connectivity node passed to subnet "169.182.16.0" with one or more nodes brcpda178, brcpda179

  Check: The subnet '169.182.16.0' TCP connectivity

  Source Destination connected?

  ------------------------------  ------------------------------  ----------------

  brcpda178: 169.182.16.24 brcpda178: 169.182.16.24 spent

  brcpda179: 169.182.16.25 brcpda178: 169.182.16.24 spent

  brcpda178: 169.182.16.24 brcpda179: 169.182.16.25 failed

  ERROR:

  GLWB-11850: System call 'connect' failed with the "113" error when running exectask on the node 'brcpda178 '.

  No route to host

  brcpda179: 169.182.16.25 brcpda179: 169.182.16.25 spent

  Result: The TCP connectivity test failed for subnet "169.182.16.0."

  = End of the error

  # This is my network configuration.

  I created 2 virtual adapters to host (Host-only network).

  ipconfig output host (Windows 7)

  Network adapter Ethernet VirtualBox:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::7930:46e8:a531:289% 24

  IPv4 address...: 10.194.135.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  Adapter Ethernet VirtualBox network #2:

  The connection-specific DNS suffix. :

  Link-local IPv6 Address...: fe80::b43f:3255:b3d0:70eb 30%

  IPv4 address...: 169.182.16.1.

  ... Subnet mask: 255.255.255.0.

  ... Default gateway. :

  10.194.135.0 is my Public network-> eth0 in each node

  169.182.16.0 is my private network-> eth1 in each node

  Here is my file/etc/hosts

  [grid@brcpda178 grid] $ cat/etc/hosts

  10.194.135.185 dnsnode185

  # Public IP #.

  10.194.135.178 brcpda178.testenv.com brcpda178

  10.194.135.179 brcpda179.testenv.com brcpda179

  # Private IP #.

  169.182.16.24 brcpda178 - priv.testenv.com brcpda178-priv

  169.182.16.25 brcpda179 - priv.testenv.com brcpda179-priv

  # Virtual IP # 3

  10.194.135.217 brcpda178 - oravip.testenv.com brcpda178-oravip

  10.194.135.218 brcpda179 - oravip.testenv.com brcpda179-oravip

  #127.0.0.1 localhost localhost.localdomain localhost4 localhost4.localdomain4

  #: 1 localhost localhost.localdomain localhost6 localhost6.localdomain6

  Here's the network interfaces configuration files in each RAC node.

  Value of GATEWAY in the file/etc/sysconfig/network-scripts/ifcfg-ethn is set to the IP address of the virtual NIC adapter to the host (win7).

  On Node1, node2 has been cloned. Thus, the UUID of eth0 and eth1 remains the same for both nodes. Hope that this is not a problem because HWADDR (MAC ID) is different between the nodes.

  brcpda178 (Node1)

  eth0

  =====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:17:91:24

  IPADDR = 10.194.135.178

  PREFIX = 24

  GATEWAY =10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:01:FC:38

  IPADDR = 169.182.16.24

  PREFIX = 24

  GATEWAY =169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  brcpda179 (Node2)

  eth0

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth0

  DEVICE = eth0

  TYPE = Ethernet

  UUID = 2ca3918d-d038-483d-946a-271751aeb11f

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:A9:68:39

  IPADDR = 10.194.135.179

  PREFIX = 24

  GATEWAY = 10.194.135.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = "eth0 system."

  eth1

  ====

  # cat/etc/sysconfig/network-scripts/ifcfg-eth1

  DEVICE = eth1

  TYPE = Ethernet

  UUID = dc9be031-ee5f-4129-9023-9c45f6a282da

  ONBOOT = yes

  NM_CONTROLLED = yes

  BOOTPROTO = none

  HWADDR = 08:00:27:05:A5:45

  IPADDR = 169.182.16.25

  PREFIX = 24

  GATEWAY = 169.182.16.1

  DEFROUTE = yes

  IPV4_FAILURE_FATAL = yes

  IPV6INIT = no

  NAME = 'eth1 system '.

  Hello

  This error is usually done to firewall or selinux - but since you have already disabled, I recommend you just do a restart of your two virtual machines as I have explained these mistakes here http://salmandba.blogspot.sg/2015/04/using-cluster-verification-utility.htm

  I also believe that you have also disabled Firewall (not only stopped) by using the command «chkconfig iptables» off
  My installation guide 12 c RAC excavation on Linux 6 Treaty of all the prerequisites that are almost the same for the 11 g RAC installation, please check if you have met all the requirements.

  http://salmandba.blogspot.SG/2015/05/installing-Oracle-12C-RAC-on-Linux-6.html

  Salman

• "Windows is unable to complete the installation. To install windows on this computer, restart the installation.

  INSTALLATION OF WINDOWS FOR THE FIRST TIME

  Hi, I am using the windows 7 Home premium with Sony Vaio netbook.  This message appears when I've been windows installation since it is newly purchased, "Windows could not complete the installation. To install windows on this computer, run the Setup again"when I click ok, and then the computer restarts automatically and then come back to this message. I reboot several times but the result was always the same. Home premium to Windows 7 has been with the netbook already, so I don't have the Disc... can someone help me solve this problem? Thank you very much

  My colleague has had a similar problem when she came back to the States with a new Vaio from Sony, I didn't just run recovery and reinstall Windows and its worked good since. She even gave me a hug for fixing.

  The problem seems to be the OOBE which would suggest its more hardware than windows, but I understand your nature, you want to be right about everything.

• I can restart the installation from DVD on a machine having a corrupted installation current hard disk?

  I just replaced the motherboard on my sisters machine because the ATA controller is dead.  The old installation of windows 7 has said there were errors so I had to restore.  After the restoration and the restart, he began "configuration for first use" but then says there are errors, probably because the restore partition has been altered as well.  Given that installation on the hard drive appears to be in the middle of the installation, the installer of windows 7 on DVD will not start a new installation, it sees just that there is an installation in progress, assume that the computer has restarted just in the middle of installation and continues with the current installation, which always leads to failure.  When the DVD boots it just goes to a black screen directly to continue the installation, no chance for the entry of any kind.  How can I force the DVD to ignore the installation on the hard drive and start over?

  Start from a repair disc and format the C: drive.  If you do not, you can do it on another computer Windows 7 by clicking on start-> Control Panel-> backup and restore-> create system repair disc.  Insert a CD - R and it will do so.

  Good luck.