Behavior of Lightroom Windows not like all other Mac applications

Similar Questions

• SanDisk Extreme USB 3.0 unusable as Windows support install all other key 3.0 USB works

  Hello

  I've explained the problem that is described in detail in the following thread, please read full for understand what is the problem.

  http://www.wincert.NET/forum/topic/11021-SanDisk-Extreme-30-32GB-cant-go-on-at-install-destination/

  In short:

  The problem is in the stage of Windows where you select the partition to install it's unpossible click Next:

  An error message appears that says: cannot find any partition or create an install for... but the hard drive is visible and its also possible to create and delete partitions, so the error message is bull * beep *.

  My thougth is that sandisk stick is detected as disk sata hard and is internally by mistake folders as first hard disk, if I get out the stick at the stage where I select the partition, click Refresh, reconnect the key, other refreshment so I can install on the hard disk.

  What is the problem with your extreme poles? Any other key usb 3.0 works well.

  To pull the stick and so on is just a workaround dirty, I bougth the stick because of the speed!

  Greetz X 23

  Hello

  Nobody talked about windows to go...!

  You didn't read the linked thread right?

  To please you, and then you might think about your answer.

  You will find the most important information on page 3, if you

  don't have the time to read them all.

  EDIT:

  
      dotfusion, on 27 Feb 2013 - 23:21, said:
  
      @x23piracy,
  
      I have searched high and low for more more information ob this odd behavior. But all i can find is either not reliable or solutions such as the one tried. No real reason as to why or what is the problem.
  
      I suspect it has something do to with the way the partition tables are setup on the source media (in this case a san disk usb drive.) I would start there.
  
      amaltom61, on 01 Mar 2013 - 12:41, said:
  
      I had the same problem with a 2.0 8 gb drive. I found a fix on the net, Just create about 150 mb or more of unallocated space in the hdd or ssd you are trying to install windows
  
      Resizing a partition would do the trick but do a full back of the drive just in case
  
      Stimpy, on 01 Mar 2013 - 17:12, said:
  
      Windows setup will run a refresh on the USB bus at the point that you are having problems with.
  
      One way to get around it, is to pull the USB disk out, then put it back in, and go back one step of Windows setup, and try again.  This works in most cases with this error.
  
      bphlpt, on 01 Mar 2013 - 17:15, said:
  
      The questions remains.  Why is this happening with this particular brand/size of USB stick while it is not happening with others, and how to prevent this behavior?
  
      Cheers and Regards
  
      Stimpy, on 01 Mar 2013 - 18:46, said:
  
      It's a good question.  I also own the same drive, and have the same issue with it.
  
      I have a feeling that the controller in the stick is slow at initializing, and is simply not fast enough for Windows Setup.  If you watch the USB stick when Windows is setting up, you can see that it's being initialized, (just before setup asks what drive you want to install Windows on) as my mouse and keyboard also disconnect and reconnect at the same time.
  
      amaltom61, on 02 Mar 2013 - 13:05, said:
  
      Stimpy can be correct. One way i found to solve this problem is to create some unallocated space in the drive(150 mb or more). 
  
       bphlpt, on 04 Mar 2013 - 08:00, said:
  
      Even though you weren't talking about that, I don't know why it wouldn't work.  I've reformatted them before, Fat32 and NTFS.
  
      OK, I went looking for references.  Yes you can do it, but it seems it is not as easy to do as I thought, at least for everyone.  Some folks say the standard built-in Windows 7 tools do it automatically, some say they don't.  I still haven't tried it, since I don't have a USB stick available to partition at the moment.  Some references say that that you need to flip the USB removable bit so that Windows will see the stick as a fixed drive before you can partition it.  I also found  two different tutorials or how to partition a USB stick here and here.  So, yes, one way or another it can be done.
  
      Cheers and Regards
  
      Stimpy, on 04 Mar 2013 - 16:59, said:
  
      Yeah, I have looked in to this a while ago. And found that you cannot partition this USB stick. It needs to be seen by the system as a fixed drive, but for whatever reason, Sandisk are not interested in helping their customers out with this, as it is a simple change to the drives firmware, like you described. There is a rumour going round that Sandisk are going to realease an updated firmware that will make this drive compatible with Windows To Go, and turn it into a fixed disk. I think that's unlikely, but you never know!
  
      Have a look here, it seems Sandisk support simply does not care.
  

  Greetz X 23

• 5 Lightroom will not import all the pictures on the card

  Hello

  I use Lightroom 5 successfully for six months (Mac OS X 10.7.5 - my camera is a Canon Mark III - and I shoot in raw), and never had a problem with importing the photos. Suddenly, when I clicked import, and then click my card, vignettes on the map came yesterday, but most have been grayed out, and the program wanted to import photos select a few. I made the updated for 5 of Lightroom, but still can't get the photos to import. The same thing happens again today with a second card, and I can't uncheck / check all photos or find another way to get photos of gray to become not gray or import. I hope someone can help me quickly, because I'm running out of cards.

  Thank you.

  Thanks Catherine.

  These questions are normally due to a kind of hardware malfunction.

  The cards themselves may be a problem (less likely because you have used multiple cards).

  The card reader could be a problem.

  The USB cable connecting the card reader to the computer may also be defective (you could try another cable and see what happens).

  Sometimes the USB port and the controller are may be damaged.

  Something to try passing through all of the options is to copy images from the card on your system, and then try to import them into Lightroom from the hard drive and see if the problem persists.

  This process is something a little test by mistake.

  Tony Jay

• Cannot print from excel only, all other office applications print well

  Original title: printing problem

  I have already installed the software for our range of hp printers 6525 in my laptop, my problem is that I can't print all my works to excel, but all the desktop applications such as PowerPoint, word and others can be printed in printer hp said. I already uninstalled and reinstall the printer software, the problem is always the same. I want to ask where is the problem and what step do I do to fix the problem, so I can use the printer in my works of excel.

  Thank you and hoping answers from the community.

  Willie

  Hi Willie,

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you can not print.

  I would like to know some information.

  1. You are able to print everything outside the office application?

  2. You get no matter what error code or error message?

  3. How long are you facing this problem?

  4. Did you change the settings on your computer before this problem?

  I first suggest you to try the steps in the Microsoft Help Article below and check if that helps.

  http://Windows.Microsoft.com/en-us/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1

  If this problem is specific to excel, then you can refer to the suggestions of Deepa Raj replied on September 18, 2012 and check if that helps.

  http://answers.Microsoft.com/en-us/Office/Forum/officeversion_other-Excel/Microsoft-Excel-has-stopped-working-how-do-i-fix/9e593e6e-a2f3-499a-be4f-9edb6accfcc5

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Lightroom can not be opened - 1712. Application does not. Photoshop is ok. Member CC

  I am a cc Member monthly. Updated Lightroom 15 days he y a. Application is not responding. Error message: Lightroom can not be opened - 1712. It was working fine. Photoshop is fine. Have OSX 10.9.5.

  Hi keving37533322,

  • Could you please go to the Applications folder and then right-click on Lightroom.app
  • Select the option "Show the Package content", and then open the content folder.
  • Open the MAC OS folder, and then double-click the Lightroom.
  • If please see if the Application is opening or reacts always do not.

  Kind regards

  Tanuj

• 6 Lightroom does not respond after sycing mobile application

  6 Lightroom does not respond after I tried to sync with mobile App. anyone having this problem?

  Trudy

  Hi uncagedwoman,

  • Please go the library Module, then go in the preferences.
  • Go to the performance tab and uncheck the option "use graphics processor.
  • Restart lightroom. and check

  Please let us know if it helps.

  Kind regards

  Tanuj

• printer and windows 10 do not like the other

  I talked to a technician windows, hp tech and my tech at & t.  Everyone took control remote my PC and tried to solve my problem, but to no avail.  the printer works perfectly with the new ink when printing from the test of the printer on the printer control panel, but not from the PC to the printer test.  The text on the printer test done by selecting the printer control is nice and black.  When you choose print in the PC, black is a light grey and unreadable.  All the drivers are up to date, the printer has been uninstalled and installed again... all the settings have been made by the technicians.  It will not print from my PC.  I'll have to go somewhere tomorrow to print some important documents required for the trip.  A friend who is a technology too, but did not see my PC, says it's the windows 10 this is the problem and there appears no way to fix it.  Does anyone know how to uninstall the windows 10 and return to windows 7, I loved and who was visually much better and I was able to print from like a charm.  I need to get there soon.  Thank you

  I talked to a technician windows, hp tech and my tech at & t.  Everyone took control remote my PC and tried to solve my problem, but to no avail.  the printer works perfectly with the new ink when printing from the test of the printer on the printer control panel, but not from the PC to the printer test.  The text on the printer test done by selecting the printer control is nice and black.  When you choose print in the PC, black is a light grey and unreadable.  All the drivers are up to date, the printer has been uninstalled and installed again... all the settings have been made by the technicians.  It will not print from my PC.  I'll have to go somewhere tomorrow to print some important documents required for the trip.  A friend who is a technology too, but did not see my PC, says it's the windows 10 this is the problem and there appears no way to fix it. Does anyone know how to uninstall the windows 10 and return to windows 7, I loved and who was visually much better and I was able to print from like a charm.  I need to get there soon.  Thank you

  If you don't like Windows 10, there is provision integrated into Windows 10 for you to restore to the previous operating system, within 30 days.

  "You have a month to upgrade to 8.1 Windows or 7, depending on what you upgraded, so Windows 10 isn't good for you"

  http://www.TechRadar.com/au/news/software/operating-systems/you-have-a-month-to-downgrade-to-Windows-8-1-if-Windows-10-isn-t-right-for-you-1299430

  If you are unable to see if in the first 30 days of upgrade option will be removed and, you will have either to reinstall the original operating system from the media original or an Image of the system as you did the original operating system before you perform the upgrade to Windows 10.

  @@@@@@@@@@@@@@@@@@@@@@

  Or you may need to follow these methods to reinstall Windows 7.

  The only legal Windows 7 download available is now Microsoft, as Microsoft has stopped DigitalRiver Windows 7 ISO downloads.

  http://www.Microsoft.com/en-us/software-recovery

  But Microsoft only provides these downloads for Windows 7 keys to selling product at retail, not preinstalled OEM product keys (Dell, HP, etc.).

  If you have a preinstalled OEM license (Dell, HP, etc.), contact the manufacturer of your computer to order recovery media that they need to provide for a fee, IF they still have them available.

  Or you can also borrow the same exact retail edition DVD of Windows 7 and use your product key to reinstall.

  The COA sticker with the product key is either or in the battery compartment on the underside of the laptop.

  With a desktop computer, it's on the side, the back or the top of the computer case.

  

  See you soon.

• Windows 7 Ultimate, keyboard/touchpad not working all other startups?

  A laptop computer that had Windows Vista on it, I bought Windows 7 edition integral and installed the same computer, after you put in a new hard drive.  All updates are performed.  It seems to happen every time you start another.  The touchpad/keyboard will not work.  Not sure what the remedy is.  Also, the question becomes just how to turn off once it comes on without the keyboard work.  Hit the power button, in my opinion, this isn't a good answer.  The unit seems to work fine when he had Lunix for OS, but I prefer Windows 7.

  To turn off it when the keyboard and the touchpad does not work, you can try to plug a USB mouse or external keyboard.

  I suggest that you go to the web site of the manufacturer and update the chip set driver and touchpad driver related device is established with the latest Windows 7 drivers available.

• What di I do it for My Google Search engine works because it does not yet all other seaches work?

  I have reset Firefox. I get all recently warning of security windows on a BTRoot certificate is not invalid. Before that, I used Google since originally installing Firefox, now when I try a search, I get a problem with page load error. I have firefox on another computer and the same search goes along. I can also use any other search engine in your library, and they work fine as well. Why not google? Can I fix by accepting the certificate in windows?

  Follow these steps, but the problem still exists. Eventually completely uninstall Firefox, restored my PC to a restore point prior to initial installation, and then reinstalled firefox. Now, everything works fine on my old windows XP computer and my Google search is ok. It has also eliminated my problem with a BRTRoot problem where I apparently had a fraudulent site interfering with Google.
  Thanks for your help.

• Pin the tabs like all other normal tabs scrolling

  Before upgrading to 29,01 I got my tabs pinned the left upper corner of the screen. And when I scrolled the tabs, only not pinned tabs would scroll. Now, after the upgrade, all tabs, pinned and no pin scrolling at the same time. Another odd thing: when I scroll to the left with the mouse, everything is fine, until the first pinned tab reappears on the screen. So I can't scroll with the mouse. To get the other pin tabs back on the screen, I have to click on the < button.

  Please try Firefox 30, this is not the case in this version. However if the behavior is the same, please try resetting Firefox. This will restore the default browser options.

• I just load windows 8 and all my office applications have disappeared. even can not find them in the list of programs, I am retired and was a dealer of microsoft my laptop had all about it at the office.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  my laptop is a sony viao. I have the personal documents but outlook, word, access, etc are all gone, I can t even find them on the c drive.

  I was in windows 7

  Assuming that you have chosen not to keep your programs and your files (it certainly seems like that) - then you will need to install Microsoft Office from your installation media using your product key.
   
  

• Why can't move window 7 for all other windows

  I continue to do what said each Web site, but when I update windows and go to check for updates, it says "windows update cannot currently check updates, because the service is not running." You may have to restart your computer"and I restarted my computer like a million times. I don't know what to do next please help.

  try to upgrade manually:

  Option 1:

  Download the media creation tool

  Click with the right button on the MediaCreationTool.exe file and then click on run as administrator.

  

  Note: How to check if you are downloaded or installed the update Windows 10 November

  How to create an ISO or USB drive.

  Select upgrade this PC now and then click Next

  

  Option 2:

  Task of pre-required

  When you make significant changes to your computer for example updated operating system, you must always back up. See the links to resources on the backup by clicking the link for each version of Windows you are using: Windows XP, Windows Vista, Windows 7, Windows 8/8.1

  • How to back up and restore your files manually
  • How to free up disk space in Windows
  • How to: 10 tips before installing Windows 10

  then

  • How to download official Windows 10 ISO files
  • How to: upgrade previous versions of Windows using the file ISO for Windows 10

  then

  • Turn off (preferably uninstall) your Antivirus utility before you perform the upgrade.
  • Reboot several times, and then try again.
  • Disable the general USB peripherals (for example - smart card reader).
  • If you are using a SCSI drive, make sure you have the drivers available for your storage on a thumdrive device and it is connected. During the installation of Windows 10, click on the advanced custom Option and use the command load driver to load the driver for the SCSI drive. If this does not work and the installer still fails, consider switching to an IDE based hard drive.
  • Perform a clean boot, restart, and then try again.
  • If you upgrade to the. ISO file, disconnect from the Internet during the installation, if you are connected in LAN (Ethernet) or wireless, disable both, then try to install.
  • If you are updated through Windows Update, when download reaches 100% disconnect from the LAN (Ethernet) Internet or Wi - Fi, then proceed with the installation.
  • If this does not work, try using the. ISO file to upgrade if possible.
  • If you are connected to a domain, go to a local account.
  • If you have an external equipment, attached to the machine, unplug them (example, game controllers, USB sticks, external hard drive, printers, peripherals not essential).

• Cool fired command does not. All others?

  I use SQL developer 2.1.1.64
  Trying to get the crackling by id.
  I tried the command collection:
  
  Select E.ID, COLLECT (E.MODE)
  TABLE1 e
  E.ID group
  
  But I get an error:
  ORA-00932: inconsistent data types: expected NUMBER obtained -
  00932 00000 - ' incompatible data types: wait %s %s got. "
  
  Are there other ways to achieve the same result that collect?
  I tried to use stragg but the developer does not.

  ID     MODE
  1     505
  1     506
  1     507
  1     508
  2     203
  2     204
  2     205
  3     201
  3     202

  ID     Collection
  1     505,506,507,508
  2     203,204,205
  3     201,202

  In 10g, you would do the same, using only SQL...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with t as (select 1 as ID, 505 as MD from dual union all
    2             select 1, 506 from dual union all
    3             select 1, 507 from dual union all
    4             select 1, 508 from dual union all
    5             select 2, 203 from dual union all
    6             select 2, 204 from dual union all
    7             select 2, 205 from dual union all
    8             select 3, 201 from dual union all
    9             select 3, 202 from dual)
   10  --
   11  -- end of test data
   12  --
   13  select id, ltrim(sys_connect_by_path(md,','),',') as modes
   14  from (
   15        select id, md
   16              ,row_number() over (partition by id order by md) as rn
   17        from   t
   18       )
   19  where connect_by_isleaf = 1
   20  connect by id = prior id and rn = prior rn + 1
   21* start with rn = 1
  SQL> /
  
          ID MODES
  ---------- ----------------------------------------
           1 505,506,507,508
           2 203,204,205
           3 201,202
  

• Buy iMac Air w/El Capitan. CS6 AE CC does not. All other cloud programs are very good. HELP PLEASE

  Help!  We bought a new iMac look, super car and Creative Cloud Master Collection 6.  First, PhotoShop, Illustrator, all work fine.  After Effects are NOT.  I googled the question and watched some videos of youTube on downloading the update, download Adobe Manager, etc..  I did all that, but still... I get this error "you cannot use this version of the"Adobe After Effects CS6"application with this version of Mac OS X. You have "Adobe After Effects CS6" 11.0.

  Help!  I need After Effects with my first.  If anyone can help?

  You must update AE version 11.0.4 to work on El Capitan.

  Videos YouTube suck usually with After Effects stuff... This page is much more useful: After Effects and animation character ready for Mac OS X (El Capitan) v10.11

• CC of Photoshop crashes at the opening, but all other CC applications seem to work very well.

  I just installed CC last night, so I have a lot of time working with the CC apps still... Bridge is works well since the beginning for a LOT of sorting and tagging the images for a day and a half, and I opened CameraRAW, a handful of times without problem, then tonight I tried to open Photoshop CC for the first time and got a bunch of strange on expired trials and problems of activation messages and other errors and then it crashed... At first, I think that my internet security software might hinder attempts to Photoshop to confirm licensing online, but I seem to have gotten smooth... so I no longer get the weird licensing error, but just after that Photoshop load very quickly get the error "Photoshop has stop working" and it crashes. After experiencing this problem I went and I tried all my other apps CC and first, Illustrator, InDesign, bridge all seem well... just Photoshop gives me questions.

  I've tried "disconnect" and the signature in CC apps as suggested in the forums.

  I use CC on Windows 7 pro. I have Master Collection CS3 and CS5 installed on this computer... but I uninstalled these completely before installing new applications. I had some errors in the installation of CS3 so I used the Adobe cleaning tool to ensure that the CS5 and CS3 was completely uninstalled before you start fresh with CC. I do not expect this previous software is at the origin of the problems, but I thought I'd give a full description of my situation.

  Here are the full details provided in the error message when Photoshop CC crashes.

  Help, please!

  The f

  Signature of the problem:

  Problem event name: APPCRASH

  Application name: Photoshop.exe

  Application version: 14.0.0.0

  Application timestamp: 5176451b

  Fault Module name: atiocl64.dll

  Fault Module Version: 2.3.451.0

  Timestamp of Module error: 4cfd9adc

  Exception code: c0000005

  Exception offset: 0000000000074fd0

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  Information additional 1:5118

  More information 2: 5118284d710e59d7df066d776d38eee4

  3 more information: a97b

  Additional information 4: a97b4a62f69517c858ce776a2c65adc9

  I got it working with the help of Live Chat technical support. There was some sort of error that happens with my graphics driver... something that was not a problem with my previous version of Photoshop is now a problem with the new version. I've updated the graphics card driver and software through the manufacturer's website and that helped me to pass through.

  After updating the driver... at first it was as if I'd a while back... I'm a mistake period expired trial again on open Photoshop first, but then I tried again a disconnection and connection back to the CC, as noted previously ( http://helpx.adobe.com/photoshop/kb/cc-applications-crash-immediately-launch.html )... and this time, which contributed to correct the error of the trial and that time was not followed to crash (thanks to the update of the graphics driver).

  I have an ATI Radeon HD 5670 graphics card. The previous version of the driver that I was running was not working with Photoshop CC. I've now updated the driver to version 12.104.0.0 and everything works now.

  Thanks to the Live Chat technician who quickly identified my graphics as the question!