Behavior of strange Position MC Edit Listbox

Similar Questions

• Windows mail suddenly strange behavior in Windows Vista Ultimate Edition

  Windows mail attachment installation behaves is no longer as he did before some 25 windows updates 14/04/2011.

  When I receive today a mail with an attachment list of the mails in the Inbox screen poster that an attachment is present however when you click on the specific email mail don't watch not only itb has an attachment also unless there was possible to miss the fact that it is there

  If one clicks on the indicator of attachment in the box to list then a message asking you if you want to open the attachment.

  One wonders if MS has changed the way Windows Mail works on Vista or upgrades she included it or is it corrupted in some form.

  Tried the usual things to stop anti virus etc and the removal of updates, but this made no difference. At this point reluctant to do a restore to pre 14/04/2011.

  This is due to a series of bugs introduced by IE 9.  If you uninstall IE9, you'll see that the problems go away.  It is unlikely that there will be a fix, like those of Microsoft aren't replying to MVPs who contacted them on this matter.  You can also work around the problem by opening the message in a separate window.  See this thread for more information: http://answers.microsoft.com/en-us/windows/forum/windows_vista-networking/windows-mail-font-problems-after-installing-ie9/a4274c96-d44f-e011-8dfc-68b599b31bf5

  Steve

• Waveform behavior of strange graphics update

  I have a strange problem with a waveform graph in a VI in LabVIEW 8.5.  For some reason when our diagram must autoscale the y-axis, all of the graph will redraw.  This causes a noticeable delay and is visibly distracting. At first, we thought it was a problem with the style of point, as we see only this question in our application by using a style that uses individual points for each data point, rather than connecting the dots with lines.

  To test, I made a sample VI to ensure that he was not a problem of performance with any of our other codes and slipped and fell the graph of our application in a new VI.  I made a simple pattern that simulates the data written on the chalkboard.  I was a little relieved when I saw the same problem because it made me think that it wasn't our code that was the issue.

  Then, on a whim, I decided to replace it with a 'new' waveform graph.  After you set up a certain number of things, I tried to reproduce the behavior, and I can't!  I tried to make the two graphs as identical as possible through all the settings, but I can't understand why it is shown the repainting issue, while the other does not.

  I have included the two screws, and I'd love to know if others see the problem, and if anyone has an idea as to what is the cause.  To see what I mean, turn the knobs Amplitude and prejudice to force the chart to repaint.  GraphUpdateTest.vi will NOT show a problem, while GraphUpdateTest2.vi will be.

  Thanks in advance!

  -Ron

  Hi Ron,

  I could see what you're talking about, and I created a demand for corrective measures for this issue. Thanks for the bug capture.

• Behavior very strange pdf / really need help w this.

  When I install Adobe Reader, ALL pins icons & all links to other programs are modified in adobe reader shortcut.

  As soon as I uninstall Adobe Reader, program & shortcuts icons back.

  To test I also installed Foxit Reader and it worked normally for a while. Then he, too, mimicked the behavior of Adobe Reader.

  This, I infer that something is happening when I try to open a pdf file, no matter what player I use.

  I am up to date with the program-ESET NOD32 definition files.

  Currently, I can't read any pdf file.

  Running Win7 Home premium

  Thank you.

  Try this:

  http://helpx.Adobe.com/Acrobat/KB/application-file-icons-change-Acrobat.html

• Elements of change of position on editing?

  Hello

  I just made an update to my front page, which looks great in the Muse.

  

  But if I saw in a browser, it happens... (it's the same thing as they are released too)

  

  It is the address of the site.

  AMG Productions - home

  Any ideas?

  See you soon

  A

  The culprit seems to be the 'glow' effect I put on layers of text. Remove it and publishes it ok.

  No need to effect that you can't actually use.

• Behavior of strange line Segment

  This is a question about Illustrator 10; Sorry, I know it is old, but we have to work with her... We are working on a PC - Windows XP service pack 2.

  I can select the line Segment tool and draw lines as expected; the problem is that whenever I draw a line segment and apply the arrow heads, I can draw no longer segments of line without arrowheads. I've exhausted the help system and have tried everything to reset the line segment tool, but nothing works. If I want a regular line in the diagram segment I'm working, I have to create a new drawing, draw a line, then copy it & pick up the the other drawing, then copy it and paste it for all of the lines that I need without arrowheads.

  I'd appreciate any help to solve this. Thank you

  Dan

  Yes, that can be a pain in the thigh.

  Use the drop of the appearance palette and select ' new art has basic appearance. »

  Use 'clear appearance' or "reduce to the basic look" in the same menu to remove the arrows of a line segment, you already drew. Note that 'clear appearance' will remove any style also.

• CSS keyboard files strange behavior - Dreamweaver CS4.

  I have a question that is really frustrating. Whenever I'm editing one. CSS file, I'm seriously wacky behavior.  I'll be editing and it will be fine for a little bit, but then I hold down the < shift > key and any key other than the letters will work properly, the entire document will be the highlight, or DELETE or nothing.  I'll end up in random places.  It is so bad that I started to edit my CSS in notepad ++ just to save my hair.

  The really strange thing is ONLY happens in. CSS files.  HTML, JS, etc are all normal.  I'm a typist touch (tribute to Ms. Martin in high school) and use the keyboard a lot for things like the lines of copy, cut and paste.  At first, I thought maybe would it be my keyboard but I have 2 different Microsoft Keyboards, and then the laptop keyboard, and the behavior is the same on all of them.

  My setup in the case where it makes all the difference is:

  • HP EliteBook 8530w
  • ATI FireGL 256 MB video card
  • Windows XP SP3
  • Dreamweaver CS4

  Keyboards in question are:

  • Laptop keyboard
  • Microsoft 7000 wireless ergonomic keyboard
  • Microsoft Natural Ergonomic Keyboard 4000

  What I tried:

  • Update drivers
  • Remapping keys in Dreamweaver
  • Checking Windows keymappings
  • Disabling microsoft IntelliType.

  So far, nothing works.

  I'm glad to hear that you figured it out. Please provide the details for others who may run into the same problem.

  Thank you

  Randy Edmunds

  Dreamweaver development

  Adobe Systems, Inc..

• Strange behavior on food purchases

  Hi, I work with a viewer app with storefront customized by using the 2.30 DPS library library and store kit Adobe SDK, but when I try to restore purchases the behavior is strange. If I try to restore a purchase with an account who buy all folios and after I restored the purchases with an account that never buy a folio all folios remains as purchased, in the source code of all folios with properties:

  isPurchasable: false.

  isDownloadable: true,

  IsFree of folio object function always returns false for all folios, however the folio appear in the Viewer as a downloadable object.

  If I install my Viewer on new device I see all folios with price:

  

  Now I'm trying to restore purchases with an account who buy all folios:

  

  The restore is successful.

  

  Now, if I try to restore purchases with different account than ever buy a folio is the result:

  

  
  

  Now the remnants of as downloadable folios, not be granted:

  

  Starting from this moment and whenever I have erase my App and re install on device always all folios with any account as purchasable rest. Don't restore device from the default configuration Viewer show the price of folios.

  For more details I'm restore purchases with this method:

  var tRestorePurchases = adobeDPS.receiptService.restorePurchases ();

  tRestorePurchases.completedSignal.addOnce (Store.onRestorePurchasesCompleted);

  On my onRestorePurchasesCompleted just repaint the page to see all the folios with the new properties of the new account.

  Do you know what is the problem? or what I am doing wrong?

  Thank you

  Hello! I found the solution, I'm building my Viewer with Version 29 and works very well, so I conclude that the problem is v30 and I wrote in support of the team and this was the response:

  Hi Jose,

  This bug has been introduced from the R30. Until this specific bug will be solved, the solution would be to rebuild the apps with V29.

  Unfortunately I can't give you any ETA, but I hope that this will be resolved in future releases.

  Our Support requests closed automatically once I answered you at the moment, but the ticket of development #XXXXX will remain open until the problem is completely resolved.

• editable in Contribute behavior

  Hello
  
  I use the behavior of the open browser windows to present viewers with a window size containing embedded movies. Now, my publishers Contribute using this same behavior over and over again in the pages of models. The only thing they have to do is to change the link that the new window opens with;
  
  onclick = "MM_openBrWindow ('anynewmovie.html',", 'width = 720, height = 520') ""
  
  But how to accomplish this? Simply wrapping an editable area around anynewmovie.html does not work. I'm sure that I forgot something here but you don't know the answer.
  
  Thanks for the ideas on this.

  Learn more about model parameters, use F1 help to DW.

  If you had a parameter named 'movieURL' defined in the page (as a template
  URL parameter), then you can change your markup like this.

  onclick = "MM_openBrWindow (' @(movieURL) @',", 'width = 720, height = 520') ""
  (assuming that the width and height are always the same) and the
  editors would be able to change this value at will, and then using EDIT |
  Properties of the model of...

  (this won't work if the link to which the behavior is applied to a
  editable)

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "Tim Koeleman" wrote in message
  News:e3fdjd$7a2$1@forums. Macromedia.com...
  > Hi,.
  >
  > I use the behavior of the open browser windows to present viewers with a size
  > window containing embedded movies. Now, my publishers Contribute use
  > even
  > behavior over and over again in the pages of models. The only thing they need
  > do
  > is to change the link in the new window opens with;
  >
  > onclick = "MM_openBrWindow ('anynewmovie.html',", 'width = 720, height = 520') ""
  >
  > But how to accomplish this? Simply wrapping an editable area around
  > anynewmovie.html does not work. I don't know that I forgot something here
  > but
  > could not find the answer.
  >
  > Thank you for ideas on this.
  >

• Problem with the change in value of listbox event

  Hello

  I have a problem with the help of Listbox value change event. The code that I have attached is a simplified version of the largest program, but the problem is the same. One of the loops of Nonna is responsible for handlig occurring events ant the other is responsible for the execution of the program. In the project of oryginal I use a listbox control to determine which plots graphic display of a waveform is visible (first position of the listbox-> only plot first visible etc.). In the attached vi, I just show the current value of the listbox control. The problem is the event runs only once and then the program crashes. I want to be able to change the value of the listbox work both at idle and in State of a program, but when I put the structure of the event in both States, he does not. I'd be very grateful if someone smarter than me could tell me where I made my mistake. I want my program to be able to manage the keys and listbox events in States (slow down and knit) program.

  You have two structures of event in two cases different from the structure of the case, and both are tuned to listbox events has changed. Because only once can be triggered at any time, the VI crashes (lock events the front panel (default) until the event can complement).

  You must use a unique event structure managing all events.

  The overall program architecture looks like inside-out for me.

  For the buttosn, you must use action lock (switch not release!) and use the value changed events.

• Strange problem by overwriting JPEG files

  I have a strange question to edit and save a series of JPEG images. When I click on "Save as", it automatically opens the directory that he, and the default save name is identical to the source JPEG (as usual). But when I hit enter, rather than ask me that if I want to overwrite the original file (which has the same name), it saves just no questions asked. So when I browse to this folder, I see that it recorded in separate JPEG format, but with exactly the same name. So now I have two different JPEG files in the same folder with identical names. What happens here?

  See you soon.

  A file may end with. JPEG and the other can end in. JPG

• Editable drop down list

  Hello!

  I use editable in Dreamweaver drop down list

  Application Panel, server behaviors > + > Developer Toolbox > form controls > editable dropdown

  That was a GREAT option, but I must add 1 option, when I'm about to ADD an item to the list, all you can do is to add 1 point for 1 column in a database.

  Struture of database:

  ListId userid listItem listitemValue

  But all I can get it to update is listItem , I need to be able to when the "ADD THIS" button is pressed, I can add value to USERID also, is - it possible? I tried the deap immersed in it, but some things I just don't understand that far down.

  Any help would be greatly appreciated!

  See you soon and thank you in advance.

  Justin

  Okay, I totally misunderstood. Sorry for the confusion. I'm afraid I'm not much help on this particular function. Some features I really ripped and modified, this isn't one of them.

  This does not resemble one of the simplest to change unlike some other functions.

  Before you try to enter the information on how to break it down, is long there all the info that you are trying to update of chance is a certain type of default or incremental, name something that can be hardcoded?... or is it unique as a visitor, so you're pulling every time? Ex: User1, user2 vs.   sally101, david2009, etc..

  If this is not the case, there are several lines of variable change of setting and function to change at first glance.

  I can watch it later, but the variables are not yet in that the same insert feature page.

  Here's the key in WDG_recordsetInsert.php line,

  $sql = "INSERT INTO". $vars ['table']. ' (' . KT_escapeFieldName ($Vars ['updatefield']). THE VALUES ') ('.) KT_escapeForSql ($text, 'STRING_TYPE'). ')';

  but the reactive power seems to come out of a table in ' WDG_functions.inc.php: here are the variables of the function for the function to insert above

  $WDG_sessInsTest = & $_SESSION ['WDG_sessInsTest'];

  [$WDG_sessInsTest] = array)

  "conn"-online $connectionName,

  "rsName"-online $rsName,

  'table'-online $sqlTable,

  "idfield"-online $idField,

  "METTREAJOURCHAMP"-online $updateField);

  This table can be modified (at first glance), but I can't promise that reactive power will carry through because I see exactly where this table is used again.

  As I said, if the values you need are something you could hard code start and increment, you can easily change the function "insert in" above.

  I could also play around with a few data of $_POST and data Session vars and see if you can put these lines in the SQL above.

  Sorry I can't be more help on this one.

• Windows does not work with the active Microsoft Account Sign-in Assistant service

  Hello

  I spent several hours today a behavior very strange and problematic of the debugging windows. It suddenly started doing this:

  -After starting, I log in with my password. None of the applications that are supposed to start on windows logon do not start. Taskbar shows nothing. All that requires administrative privileges performer does nothing. If I try to launch msconfig.exe it shows nothing. If I try to run the Task Manager it shows nothing. If I try CTRL + SHIFT + ESC Task manager does not appear. CTRL + ALT + DELETE, and then on the task manager - he does not appear. If I try to run-> taskmgr.exe it does not appear.

  I can do pretty much anything.

  So what I did was run the safe mode and disabled all services through msconfig. WIndows then start regularly. I tried to activate all the services of 3rd third-party and microsoft services disabled and he did run. While I started activation of microsoft services in a mode of binary search until I found that I can have all the services EXCEPT for Microsoft account Sign-In Assistant. If I activate this one, this non-fonctionnalite occurs. If I turn it off, windows are running ok.

  What is going on? I need this service or can I leave this option unchecked forever so that I can use my laptop?

  Hello

  Thanks for posting your query in Microsoft Community Forum.

  I understand that the Microsoft Online Services Sign-In Assistant is obstacle to running Windows and basic operations. Basically, this service is used for products Microsoft online several that include operations related to the connection with clients Lync, synchronization and PowerShell Module.

  In order to solve possible authentication problems experienced with this service, I suggest you carefully follow the steps described in the following TechNet article to resolve the problem.

  Microsoft Online Services Sign - In Assistant: how to turn on tracing for debugging

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

  Thank you.

• My calendar Scrolls left/right, following my mouse (using multiple monitors with the chronology in the middle)

  I currently use 3 monitors with my calendar on my central monitor. When I move my mouse to another monitor, it follows on the timeline (scroll left and right, depending on how I move my mouse). This happens randomly and reboots do not seem to solve the problem. Any ideas? Y at - it a shortcut that I'm missing?

  Hi all

  Please check this thread: Re: strange behavior of automatic scrolling in editing

  Thank you

  Regalo

• Change the function "Export to Adobe Flash" XFL

  Hello

  We are exporting from After Effects to Flash, quite successful. Unfortunately, that we must manually change the XFL (DOMDocument.xml) to get the correct behavior in Flash. These edit correct placement of recording points, Points of Transformation, and how they are obtained from data of anchor and position of EI.

  In order to change the way the export to XFL format was done by AE, we would save hours of manual editing of XML!

  Is this possible?

  I was wondering if its possible to make the script handles this command and use it as a base to produce another script specifically to our needs?

  Thank you

  Ben.

  Hi B_Kidd!

  Welcome to the forum!

  the API does not offer means of substituting or modifying the epxport to the command of the XFL.

  Perhaps, it could be done by tracking the plugin load, back of engineering it and re - write...

  I have to ask, why not ask a scrpit on XML got to correct automatically?

  Why not run a script that will export the data from the EI directly the way you want?