Behavior of the upgrades

Similar Questions

• Performance: Behavior of optimizer after the upgrade from 9i

  Hello - we intend to improve from 9i to 11g, is there somewhere describes the behavior of the optimizer and also any code changes that we can recommend to be changed for developers. It would be great for any suggestion.
  
  Thank you
  Kumar

  Hard to say - more, if not all of the code should work as it does in 9i. Only thorough in a test environment tests prove it which continues to work and what code will require changes or adjustments.

  HTH
  Srini

• How can I change the new behavior of the location of the drop-down menu on the subject which the url comes first?

  Since the upgrade to FF43, the address bar behaves differently. When I type a letter, URL that contains this letter. FF42 the first result would be any url, I visited the most, that contains this letter in its url. Now in FF43, it's always a url that starts with the letter I typed. Often, these are not the same. I now constantly, click on the wrong entry because I'm so used to everything fast click on the first person by habit.

  If the url of a site starts with the letter I typed and is also the site that I visit most, it now serves as the results! For example, if I type the letter H, my first result is: 'visit hardocp.com', and directly below there is an entry: "www.hardocp.com. This result of 'Visit hardocp.com'everything is new behavior that I want to turn off.

  Also, the deletion of an entry in the address bar does not seem to work (one that appears first, still and always starts with: 'Visit [url]'). I pointed out the entry and press DELETE on my keyboard and it disappears. I then my url most visited my first new result. But when I can cool off and come back on the address bar and type a letter, the entrance is back! It's infuriating.

  How can I go about fixing this?

  This is a new feature in Firefox 43. To turn it off to do this:

  1. Go about: config in Firefox
  2. Click on the I'll be careful button
  3. Locate the Boolean browser.urlbar.unifiedcomplete
  4. Change the false value

  Note: You may need to restart Firefox for the changes to take effect.

• Major Outlook and timing of the problems after the upgrade of the El Capitan

  On the advice of the Apple support (phone call) I recently upgraded from Yosemite to El Capitan 10.11.6.

  I have many problems. The two largest are (1) stands (2016) Outlook and frequently "must be closed; (2) calendars quickly goes to "not responding" after the launch and shows multiple entries for a single event. Example: I have a class to repeat each week (when I was in Yosemite). Before the upgrade, he showed the event once a week. After the upgrade, it it shows 13452 times the same day. I followed the advice on these topics, but nothing has worked. Similarly the calendars on my iPhone5 freezes as well.

  Hello Steve,.

  Thank you for using communities Support from Apple. I have a problem with your MacBook Air use after update is not what you expect. Based on what you said, it seems you can experience some software related issues, and here's how I recommend refine you and resolve these issues:

  1. first of all, try to run a quick with the disk utility tool test, as this can correct simple problems that you encounter. Then restart normally and retest your problems.

  Disk utility (El Capitan): a disc repair

  2. use Mode without fail to start up your Mac so that it performs certain checks, remove files from the system cache, check your startup disk and trying to fix problems if necessary directory. Test mode safe questions, then restart normally and test again.

  Try safe mode if your Mac does not end commissioning
  Graphics performance limited in recovery of OS X or in safe mode

  3. you can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  How to test a question in another account on your Mac.

  See you soon!

• Go back to the previous behavior in the address bar

  Just upgraded to Firefox 31.2 and I find that the new behavior of the address bar is in conflict with how I work. I often copy / paste URL, I type directly into the address bar, I use a current to go to about.config tab and none of these work. I found a reference to the evolution of the gfx.xrender.enabled false, but this did not help. Clues on how to revert to the old behavior?

  It's about: config with a colon...

• After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and are not working properly.

  After the upgrade to El Capitan 10.11.5 shift, Alt and command of my keyboard keys started to act arbitrarily, they are suspended and do not work properly (I already tried several keyboards and is not Firefox or Chrome). This behavior is exacerbated in Illustrator CC, but also affect all programs and even my office. It drives me crazy, does anyone know how I can fix this problem?

  Mi IMac is a 27-inch, late 2013, 3.4 GHz Intel Core i5, and use a Wacom Intuos Pro.

  Could possibly be interfering with the entry Wacom drivers.

  Start safe mode and see if there are still have the problem there. Safe mode is slow and some things do not work, but it prevents some third-party boot loading software. If your keyboard works properly in Mode without fail, this would imply that some third-party software is causing the problem. If so, check the updates.

  It also takes more time to start because the BONE is clean some system caches that can also help.

  Try safe mode if your Mac does not end commissioning - Apple Support

• After that the upgrade of my URL bar no longer displays the Protocol.

  After that the upgrade to Firefox 7.0 my URL bar is no longer shows me what protocol is used when you use http port 80. How can I turn this feature on?

  The Protocol (http://) was removed from the URL in the location bar for pages http:// only. https:// pages will always have the Protocol. This can be confusing for some users. There is also a bug known, where if you copy the URL after selection of the awesome bar dropdown (but before loading the page) it does not include the http:// part.

  Users can revert to the old behavior by setting browser.urlbar.trimURLs to false in about: config

  1. type of topic: config in the URL/address bar and press the Enter key
  2. If you see a cautionary, accept it (promise to be careful)
  3. Filter = browser.urlbar.trimURLs
  4. Double-click the pref in the lower panel of toggle it on 'false' OR , do a right-click on the pref in the lower panel, then choose "Toggle" switch it on "false."
  5. close the topic: config tab

  If this answer solved your problem, please click 'Solved It' next to this response when connected to the forum.

  Not related to your question, but...

  You may need to update some plug-ins. Check your plug-ins and update if necessary:

  • Plugin check: https://www-trunk.stage.mozilla.com/en-US/plugincheck/
  • Adobe Shockwave for Director Netscape plug-in: install (or update) the Shockwave with Firefox plugin
  • Adobe PDF plugin for Firefox and Netscape: Installation/update Adobe Reader in Firefox
  • Shockwave Flash (Adobe Flash or Flash): updated Flash in Firefox
  • Next-generation Java plug-in for the Mozilla browser: install or update Java in Firefox

• change in behavior of the button home and end

  Hello
  I have a problem with the behavior of the home, end, PG. PREC, PG. next and arrow keys. After that I have upgraded to version 6, they do not work as expected.
  I disabled each extension and the behavior is always the same...

  They work as intended in IE8.

  I hope someone has a solution.

  Make sure that NUMLOCK is not engaged, as the keys Home, End, PgUp and PgDn are often superimposed on the numeric keypad. There should be fire of keyboard for Numlock.

  Press F7 to activate the navigation with the keyboard on or off, you want it out. Test after changing.

  To reduce the problems of caret navigation, see

  http://dmcritchie.MVPs.org/Firefox/Firefox-problems.htm#caret

• Message Notification has stopped working on the upgrade of Maverick

  New Message of Notification stopped working since I upgraded in Maverick.

  Help, please...

  

  I found the 'solution' of my problem. It has been... 'My State '! I put it to "DND" and the app stop all notifications!

  It is not intuitively!

  Developers of Skype, please inform users about this behavior in the Notifications on Preferences tab!

• Since the upgrade to El Capitan, Mail frequently continues to move emails at random in the trash. How can I stop this? emails

  After the upgrade, I started noticing that the emails were disappearing from my Inbox. I finally discovered them in the trash. As I clean the junk and Trash regularly, I've lost a few emails before I realized what was going on - very frustrating! I now control Trash before deletion which is an unnecessary pain in the you know what! Everyone knows this problem and what we can do about it?

  At the same time, I noticed that when I compose an email, it appears charges sent mail in time. What is going on? Help.  Peter

  From the Mail menu bar, you select

  ▹ mail preferences... ▹ Accounts ▹ behaviors of the ball

  and uncheck the box marked

  Store drafts on the server

• How to detect the upgrade of our own application

  Hi, expert,

  We use the CodeModuleListener to detect any deletion of the application and the addition. If our request is deleted, we get the removal of module for our own application, then we'd work dé - a correct initialization. However when our application is upgraded, we would get the deletion of the module for our own application as well, so we would trigger of - initialization, falsely, that is really not desirable.

  Right now, we allow the upgrade through our own UI instead of the browser as our own UI upgrade would be made necessary by a specific menu and we know that an update will happen.

  However the upgrade via browser, we do not remove current module comes from our application upgrade or remove our application by users. Just wonder if there is anyway to detect our own upgrade of the application.

  Furthermore, permanent storage objects are not deleted during upgrade of the application and will be removed during the removal of the application, which is the expected behavior. It's just, there are some extra that we have informed our server during the removal of the application.

  Hi fold.
  It seems that now I am being misunderstood...
  I wanted to say that you must create a new application that will install your original application and the download link would point to the new application.
  In this way, users will download the new app (the Installer) and he will decide that this is a new installation or an upgrade for your initial application.

• DVD player not recognized after the upgrade to windows 8

  I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others.  Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.

  I recently updated my computer from Vista Ultimate to Windows 8.  I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve.  In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).

  The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system.  Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar.  After a bit of lost time, try software solutions theoretical I started to play with the equipment.

  My motherboard is an ASUS M3A78-EM.  My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port.  I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!

  I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.

  OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1.  After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.

  OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.

  I cannot live with that, but thought it was really strange.  Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2.  This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.

  Thanks dude.  After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2.  =)

• Adding more than one host ESX and the upgrade at the same time.  What is the order of preference of the operations here?

  We are budgeting for more licenses and hardware for 2014 and want to do immediately in January.  I am trying to decide what is the best order of operations for adding two vmware hosts additional to our current installation of vsphere and also upgrade our vsphere / esx 4.1 u3 for the latest and best.

  We have 3 Dell PowerEdge R710 running ESX 4.1 U3.  In this vmware cluster, there is a vcenter server 4.1 U3 virtual machine handle this.  The three servers are about 90% memory used so we add 2 additional servers.  Probably the Dell PowerEdge r.620 since we get up 2 in the space of a 710.  Storage is on a san EMC NX4 NFS which will become too but not yet, let's just deal with the vmware part.

  When adding additional r.620 2, should I install ESX 4.1 on them and join them to the existing cluster and THEN pass vcenter and each one esx?  I ask precisely because 90% of use on 3 current servers, I need 2 other servers to support the update operations take place.  They would be able to repel vmotioned vm while each host receives an upgrade at the same time.

  So which is the best way to go about adding of the hosts and the upgrade?  Would I add as 4.1, then they would be available as targets vmotion and so I have room to start the hosts one upgrade at a time?

  If I update vcenter to the latest version, it is comparable backwards and can manage the 4.1 hosts, but also hosts 5.x?  I guess version 5.5 is the last one I would get from VMWare?  It is right of ESXi, then, how is this ESX ESXi 5.5 4.1 upgrade?  How much storage space do I need for ESXi 5.5, as I'm dechatoiement out of these r.620 Dell and need to know what hard drive to put in.

  The steps that you must follow

  -Updated vCenter Server

  -Upgrade of the ESX hosts (because we do a updating of the material we will install 5.5 on our new guests and add them to the cluster and then dismantle our existing)

  -Upgrade VMWare tools

  -Update data warehouses

  ESXi 5.5 has these storage requirements:

  • Installing ESXi 5.5 requires a boot device is at least 1 GB in size. When booting from a local disk or SAN/LUN iSCSI, a 5.2 GB drive is necessary to allow for the creation of the VMFS volume and a scratch 4 GB partition on the boot device. If a smaller drive or logical unit number is used, the installation program attempts to allocate a region scratching on a separate local disk. If a local drive is not found, the scratch partition (/ scratch) is located on the disk virtual ESXi host, linked to the/tmp/scratch. You can reconfigure /scratch to use another drive or logical unit number. For best performance and memory optimization, VMware recommends that you leave no /scratch on the ESXi host ramdisk.
  • To reconfigure / scratch, see Configure the Scratch Partition of vSphere Client vSphere Installation and Installation Guide.
  • Because of the sensitivity of the I/O devices, USB and SD, the installation program does not create a partition scratch on these devices. Therefore, there is no tangible benefits to the use of the great features of USB/SD that ESXi uses only the first 1 GB. When installing on USB or SD, tent Setup devices to allocate a region scratching on a local disk or the data store. If no disk is local or data store, /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • In Auto deploy facilities, Setup attempts to allocate a region scratching on a local disk or the data store. If no local disk or data store is found /scratch is placed on the virtual disk. You must reconfigure /scratch to use a persistent data store after the installation.
  • For environments that start from a San or use Auto Deploy, it is not necessary to assign a separate logical unit number for each ESXi host. You can co-locate areas scrape for several hosts ESXi on a single LUN. The number of hosts assigned to a single LUN must balance the size of the LUN and behavior I/O virtual machines.

• Weird article URL in Layout sensitive after the upgrade to 11.0.3

  The following problem hit my RoboHelp after the upgrade of the v11 for the latest patch 3:

  When I generate a reactive HTML5 layout, section URL get oddly put in shape in a browser (tried Firefox and Chrome). This doesn't seem to be project-specific, because the same problem occurs when I generate even plans for the out-of-the-box standards such as Salesbuilder2 and EmployeeCare2.

  Here's what happens:

  For example, a link to:

  file:///D:/!!!/EmployeeCare/Employee_Care/introduction.htm

  Opens the URL in the following browser:

  file:///D:/!!!/EmployeeCare/index.htm#t=Employee_Care%2FIntroduction.htm

  or, say, a link to:

  file:///D:/!!!/EmployeeCare/Employee_Care/HR_Policies/attendance.htm

  Open as:

  file:///D:/!!!/EmployeeCare/index.htm#t=Employee_Care%2FHR_Policies%2FAttendance.htm

  I hope that the screenshot below illustrates what I mean:

  

  The links still work, but I really like my human readable URL. When I restore the previous version of HR, the problem goes away. Any ideas what could be the cause of this?

  Thank you!

  The cause of this behavior is the way that RoboHelp 11.0.3 manages the output. In order to have consistent navigation pane and avoid FAKE reload on every change of page, Adobe has switched to iFrames. #t = tells the output of the topic appears. And if you use the search, you will see the URL changes again.

  Since it's the layout of way until 11.0.3 from, you will have to live with it or go to HTML5 Multiscreen (where you can use a sensitive layout). Multivision HTML5 still works in the 11.0.2. way.

  Kind regards

  Willam

• After the upgrade of the database from10gr2 to 11 GR 2 accounts locked and expired

  After the upgrade of database 10.2.0.4 to 11 GR 2 accounts got locked and expired with the exception of the following users:
  SYS
  SYSTEM
  
  There are 300 + account which are internal accounts oracle are not supposed to be locked and expired in the normal HR applications product.
  
  How this behavior can be stopped?

  Hello

  After the upgrade of database 10.2.0.4 to 11 GR 2 accounts got locked and expired with the exception of the following users:
  SYS
  SYSTEM

  I think that you will have an interesting answer in this link:

  http://CN.forums.Oracle.com/forums/thread.jspa?threadID=2172418&TSTART=0&start=15

  This behavior seems to be related with DBUA in * 11.2.0.2 *.

  The next Note of MOS can help too:

  Frequent Locking Of Passwords With 11g Database [ID 1200813.1]
  

  Hope this helps.
  Best regards
  Jean Valentine