Weird article URL in Layout sensitive after the upgrade to 11.0.3
The following problem hit my RoboHelp after the upgrade of the v11 for the latest patch 3:
When I generate a reactive HTML5 layout, section URL get oddly put in shape in a browser (tried Firefox and Chrome). This doesn't seem to be project-specific, because the same problem occurs when I generate even plans for the out-of-the-box standards such as Salesbuilder2 and EmployeeCare2.
Here's what happens:
For example, a link to:
file:///D:/!!!/EmployeeCare/Employee_Care/introduction.htm
Opens the URL in the following browser:
file:///D:/!!!/EmployeeCare/index.htm#t=Employee_Care%2FIntroduction.htm
or, say, a link to:
file:///D:/!!!/EmployeeCare/Employee_Care/HR_Policies/attendance.htm
Open as:
file:///D:/!!!/EmployeeCare/index.htm#t=Employee_Care%2FHR_Policies%2FAttendance.htm
I hope that the screenshot below illustrates what I mean:
The links still work, but I really like my human readable URL. When I restore the previous version of HR, the problem goes away. Any ideas what could be the cause of this?
Thank you!
The cause of this behavior is the way that RoboHelp 11.0.3 manages the output. In order to have consistent navigation pane and avoid FAKE reload on every change of page, Adobe has switched to iFrames. #t = tells the output of the topic appears. And if you use the search, you will see the URL changes again.
Since it's the layout of way until 11.0.3 from, you will have to live with it or go to HTML5 Multiscreen (where you can use a sensitive layout). Multivision HTML5 still works in the 11.0.2. way.
Kind regards
Willam
Tags: Adobe
Similar Questions
-
After the upgrade to Firefox 34.0.5, app opens but there is no indication in the browser window, i.e. no URL opens, and there is no error message.
Safari (OSX 10.9.5) works.
I tried the firewall solution, but it does not work.
Previous version of Firefox work very well. I tried the version installation 34 twice and the computer restart.
Yoono is a free software that allows you to connect and share with all your social networks and instant messaging in one place services
www.Yoono.comIt was very good work. Play well.
Please mark your last post as solved so other will know. -
After the upgrade to Firefox version 29, the browser crashes every 30-45 seconds, about 15 seconds. [Windows Vista]
Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.
You can try these free programs to search for malicious software that work with your existing anti-virus software:
- Microsoft safety scanner
- MalwareBytes' Anti-Malware
- TDSSKiller - AntiRootkit utility
- Hitman Pro
- ESET Online Scanner
Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.
More information can be found in the article troubleshooting Firefox problems caused by malware .
This solve your problems? Please report to us!
-
After the upgrade to the latest version 13.0.1
I can't open videos from youtube and other sites
I tried all the solutions, but none works
I would also consider the following. Recent crashes of some multimedia content (this includes the Youtube videos, some flash games and other applications), in collaboration with Firefox 13 are probably caused by a recent update of Flash 11.3 and/or Real Player browser plugin to malfunction.
To resolve this problem, follow the steps in these articles in the Knowledge Base:
Flash Plugin - maintain and troubleshoot
Adobe Flash plugin has crashed - avoid that it happen
11.3 Flash does not load video in Firefox
We'll find other information on more technical issues under these links:
http://forums.Adobe.com/thread/1018071?TSTART=0
http://blogs.Adobe.com/asset/2012/06/inside-Flash-Player-protected-mode-for-Firefox.html
Please tell us if it helped!
-
After the upgrade to v10 folders appear, but nothing happens when I click on the folder
I organize my favorites in all 7 or 8 files. After the upgrade to Firefox v10 a few days ago, I find that the records are still on the list but that it will be will not develop. When I open the bookmarks library and select a record, he mentions the description of sites, but no URL. I tried to restore bookmarks in before the upgrade, but I get message "cannot process the backup file. Fortunately, I also store my favorites in MS OneNote, but I don't want want to re-create if I am likely to lose them again. I also installed the Norton toolbar.
By adopting a belt and Suspenders approach allows first of all make sure you have everything backed up. Have several copies, is the best way to ensure you have the most relevant and the most recent available.
- manual backups of existing bookmarks and this BEFORE and after any attempt of restoration, know that restorations replace existing bookmmarks
- Make a copy of your profile and put somewhere safe, outside the program paths and the firefox profile (Windows desktop is somewhere appropriate) include all subfolders and files (including copies of backup of bookmarks and bookmarks database itself)
I have not personally noticed reported problems specific to the Firefox 10 updates causing problems with bookmarks. Maybe a few extension you have involved, but whatever the cause you could now have corrupted or old installed bookmarks. If it's a - problem, you can restore your bookarks ok, but if a problem persists, you will need to continue the investigation. If you continue to say daily manual backups that you know that the worst cases, is that you lose only part of a days bookmarking.
- manual backups of existing bookmarks and this BEFORE and after any attempt of restoration, know that restorations replace existing bookmmarks
-
Problem with a keyboard key of T440 after the upgrade to Windows 10
Hello world
I have a Brazilian keyboard layout (ABNT2) on my T440 and I am facing a problem after the upgrade to Windows 10. The new version of Windows recognizes this key:
As long as the "CTRL on the right" (commom on other layouts).
Everyone was faced with a similar problem or have any clues as to what might solve this problem?
Thanks in advance,
Felipe
Solved.
Do more research, I fount out is an old bug with Lenovo's Thinkpad laptops with this Brazilian keyboard.
If you are facing the same problem, use this registry tweak and the problem is solved:
http://ZTop.com.br/WP-content/uploads/2009/11/thinkpad_abnt_win7.zip
(the file name indicates "win7" but it also works for Windows 10)
-
HP Support Assistant broke up shortly after the upgrade to windows 8
I use a 4 month old desktop HP Pavilion HPE h9-1130 Phoenix, with windows 8 pro (64-bit). There are 2 or more months, I upgraded to windows 7 (64-bit), and I followed the instructions of the windows Upgrade Wizard 8. He said not to uninstall HP support assistant, so I left. After the upgrade, which went through flawlessly, hp support Assistant works perfectly. But a few weeks or months, he ran an update, and update failed to start and the program crashed. Immediately after that, the icon of Wizard support hp in the taskbar has disappeared, as well as the program itself. It will be displayed on the list of programs, but I'm not able to uninstall or do something with it. I can't either start. I tried to get help from HP customer care, but they were a bunch of idiots who just wasted my time. I couldn't even communicate with them, because they were all Indians and speaks very by the English. I tried to ask to speak with a customer support English agent or a Manager, but they would put me on hold and it would never transfer, so I hung up. I think I spoke to 6 different customer support agents a few week spans and via different outlets (live chat, phone, email). One of the "agents of support" has been so incompetent that he spent an hour on the remote just link sitting there, doing repetitive things I told him constantly, I had already tried, like trying to do a base installation of the Web-_-... That said, I was wondering if someone could help me solve the problem, because I would like to have Deputy support back on my computer. But I am doing nothing tedious as a reinstallation of windows or something like that, because it's just ridiculous for a program very little relevant.
Resolved, by none other than myself. No, thanks to HP customer care, or this forumn. Of a curious, I uninstalled a crap tone of the files and folders that are associated with HP Support Assistant, including HP, frame Support HP, HP Setup, HP Setup Manager support and many other files via Windows Explorer (by searching appropriate tab of the computer), Windows uninstaller and Revo Uninstaller free control panel. Once I felt I had managed to get rid of a bunch of broken files of shit, I tried to install a new HP SA on their site, but it wouldn't work. To fix that, I found that guests "Overwriting" mentioned above has led to the problem, which was "swsetup" and HP SA files have been left and prevented a clean install. So to fix that, I deleted all pre-existing swsetup and files HP SA from Windows Explorer. After all this, I was able to successfully install SA HP, although I had to download it and then manually start the installation process by clicking on the executable file of the application in the new HP SA folder. Everything seems to work fine now, I ran pretty much all the features of the program and they work fine. The only thing that seems to be a bit weird is that I updated the original HP Bluetooth driver and rebooted, but it seems not to save the update, as it is still prompting me to do it again. This isn't a big deal, as an easy solution is just for x on this recommended update and hide. I will update if something happens, but if I don't update, it means that the product works as it should. Let's hope I don't have to deal with HP customer support once again, what a terrible experience!
-
Volume controls on the keyboard after the upgrade to Windows 8
I have a Touchsmart 520-1070 with the mouse and keyboard without wire factory. After the upgrade to WIndows 8, the volume controls no longer work. I tried the Recovery Manager to reinstall the keyboard drivers, but there is no driver keyboard under hardware drivers.
In the following device manager are listed under keyboards:
HID keyboard device
Keyboard 109 MCIR Microsoft eHome
Keyboard MCIR Microsoft eHome
Microsoft eHome key remove control Keayboard
PS/2 standard keyboard
Any report that they are installed and are working correctly and that the drivers are up to date.
Has anyone else seen or solved this problem with a Touchsmart computer?
The instructions below were provided by HP support. This has restored the function on the keyboard volume controls. The referenced below drivers are drivers IDT high definition Audio Device. I am not sure that it was necessary to reinstall the audio drivers. It can only had to remove the USB dongle and back to restore the functionality of the button. Note: the USB dongle is located behind the VESA Panel to the back of the PC. No tools are required and the dongle can be removed and replaced without shutting down the PC. VESA panel removal requires a bit of a steady hand, pulling the lip which is close to the connections on the rear panel.
Instructions received from HP:
Please go to the following link and check the "return of the system", article #7 is the USB dongle:
http://support.HP.com/us-en/document/c03026390
After you have reinstalled the receiver, please download and install the following driver:
Then install the following update:
-
Envy 15 j139tx: fingerprint does not work after the upgrade to windows 10
I have improved my ENVY 15 NoteBook Windows 8.1 for windows 10 j138tx. But after the upgrade of my fingerprint also does not work. I have updated software driver and it shows as follows.
And the unit is also working (it is said ;-))
But I can't add my fingerprint in sign in option. It does'nt allow me to set up.
And when I open simple passage, it shows me after the error message.
can someone please help me to reactivate it?
Hello
Open windows control panel, open programs and features, make entry for HP SimplePass right click and select uninstall.
When this has completed, restart the laptop.
When windows has reloaded, download the version of HP SimplePass on the following link and save it in your downloads folder.
http://ftp.HP.com/pub/SoftPaq/sp71501-72000/sp71729.exe
Once the download is complete, open your downloads folder, right click on the installer SimplePass and select "Run as Administrator" to launch the installation.
Once again, when this has completed, restart the laptop.
When windows has reloaded, open windows control panel and on the top right, next to the display by: select "large icons". The new layout, select the HP SimplePass entry and see if you can set your footprint digital log - on.
Kind regards
DP - K
-
Missing graphics drivers after the upgrade to Windows 8?
Hey guys,.
I see several people on the forums of the problems with graphics drivers not installed after the upgrade to Windows 8.The first step you want to take, make sure that the laptop is supported by Windows 8.
You can go HERE and see if your laptop has been tested for Windows 8. If she's GREAT!
Now, if you're still looking for the graphics drivers according to the processor you have there are several places to look.
First of all, you want to check the HP website and your product type # in the next selection > and then select the operating system > click Next > and look under the section that says "Driver - Graphic" and start the download.
If you still don't see the driver referred to in this article, you can see one of these sites according to what processor you have.Also, if you have Windows 7, you can still follow this post.
THX
I hope it's useful!
THX
-
I've recently updated my BBM to version 7.0.0.126 by suggestion in Blackberry App World. After the upgrade, I am getting an error on the screen every two minutes. It reads:
"You are attemptiing to open a secure connection, but the string server certificate is not valid."
When I click on "View certificate" I get this information:
X *. VoIP.BlackBerry.com
Unverifiable Cert Chain
Status of string stale
Revocation status: unknown
Status of trust: trust explicitly
Expiration date: Saturday, November 9, 2013 18:59:59
Certification type: X 509
The public key type: RSA 2048
Object: CN = *. voip.blackberry.com; OR: IT; O = Research In Motion Limited. L = Waterloo; ST = Ontario; C = CA
Issuer: CN is Thawte SSL CA.; O = Thawte, Inc.; C = US
Serial number: 1679 4F1B FB86 F194 CA7C AA89 432 7433 has
The key usage: Digital Signature; Encryption keys; Server authentication; Client authentication
Signature algorithm: RSA_PKCS1/SHA1
SHA1 Thumbprint: 66 4 86AB CF52 9023 C563 C776 813D C9D5 B18D 053D
MD5 Fingerprint: 933 1 12 2 81 24A 7 E35A B117 48F9 48F9
I made sure that I got everything updated on my Blackberry. Yet the problem persists. I'm on a package version 6.0 of Blackberry Torch 9800 695 (v6.0.0.246, platform 6.4.0.105). When I click "Software updates" under Options, I get: "your BlackBerry is up-to-date.
The error message is driving me crazy and sometimes it is even difficult to get any use out of my phone because it appears whenever he wants, without worrying if I type an e-mail, in contact with someone on BBM or navigation.
How can I get the error message stop popping up?
Hey Netzimon,
When you receive this error message is your BlackBerry smartphone connected to a Wi - Fi network, behind a firewall? If so, please see the following article:
BlackBerry Messenger Voice Chat using a firewall
http://BTSC.webapps.BlackBerry.com/BTSC/KB33102
Let me know if it helps.
Thank you.
-
DVD player not recognized after the upgrade to windows 8
I write this to document some odd behavior, that I lived after the upgrade to Windows 8 in the hope that it might save some grief for others. Of course, if someone could explain why this problem occurs, I'd be very interested/grateful for an answer.
I recently updated my computer from Vista Ultimate to Windows 8. I did a clean install of Windows 8, because there is nothing special about the machine I wanted to preserve. In all cases, the upgrade went without a hitch and I was soon back up with Windows 8 as my OS (I really like, btw).
The only oddity I noticed after the upgrade is that my DVD drive was not recognized by the operating system. Remember, this is the same DVD player that was used to install the OS, so I found it rather peculiar. After a bit of lost time, try software solutions theoretical I started to play with the equipment.
My motherboard is an ASUS M3A78-EM. My hard drive is attached to the SATA1 port and my DVD player is plugged into the SATA2 port. I removed the DVD drive from SATA2, plugged into SATA3, restart Windows 8 (from HDD on SATA1) and Windows 8 now recognizes the drive!
I thought it was really weird, so I stop, put the DVD on SATA2 drive, rebooted, and the drive was no longer available in Windows 8.
OK, so I thought that maybe the SATA2 channel was bad (even if he had worked at the Windows 8 DVD installation, just an hour or two before), so I put my HDD on SATA2 and the DVD drive on SATA1. After doing this, Windows 8 start very well (so there is nothing wrong with SATA2), and it recognizes the DVD on the SATA1 drive.
OK, so I did that for a while, and virtually all combinations I tried worked as long as the DVD player is not plugged in SATA2.
I cannot live with that, but thought it was really strange. Also, I note that the old operating system (Vista) was acknowledging the same DVD player while it was plugged on SATA2. This leads me to believe that the problem has something to do with Windows 8, but I can't imagine what could be the cause.
Thanks dude. After you create this registry key/value and restart Windows 8 was able to finally see my DVD drive on SATA2. =)
-
change input key after the upgrade to windows 8
I use the pavilion dv6-7012tx laptop, recently I've updated the Windows 8 operating system and then upgrade when you press (shift + 2) gives me "while pressing on (shift +') gives @ may I know what is the problem.is there solutions."
Hello okkarai1991. I understand that you have some problems with your keyboard after the upgrade to Windows 8. More specifically you get incorrect symbols when you use the combination of keys shift +. Is this correct?
Though according to me, there is a setting in Windows itself, I would like to add that HP has not released drivers for all models of laptops for Windows 8 yet. Most of the models purchased after October 1, 2011 should be supported. This site has more information on HP and the upgrade to Windows 8.
This looks like a case of Windows using a keyboard that is incorrect. Each language has several layouts depending on the region, it seems that you have one of the other selected. This is a correction which is normally found in Control Panel. The process to access the control panel is a bit different in Windows 8, so I'll give you detailed instructions.
- Press the Windows key to take you to the view of the office.
- Move your mouse to the upper right corner of the screen and move it to the bottom, this opens the bar of charms.
- Select settings in the bar of charms, then select Control Panel. Then select the Language Options.
- Click Add an input method, and then select 'QWERTY-US.'
- Remove the old method of entry, leaving only QWERTY U.S. and click OK.
- Restart the computer and verify that your work of combinations shift + you want.
I hope it's useful!
-
After the upgrade to WIN 8, Office and other programs are lost?
After the upgrade to WIN 8, have been uninstalled all of my programs, including Office 2010. Does anyone know if there is a way to get back programs without having to reinstall everything?
If you have selected "keep settings of Windows, files and applications, then you should still have Microsoft Office installed. You have not selected this option during installation?
Besides being able to keep your Windows settings and personal files, you can keep your personal files too during the upgrade to Windows 7. If you choose No, Windows 8 place your files in a folder named Windows.old.
If you have not selected these options, you will need to reinstall your programs since the original installation disc.
To launch your applications, go to the start, screen by pointing your mouse pointer on the left corner of the screen of Windows 8 and click on it.
Do scroll to the right and start your application.
For more information about how to install Windows 8 applications, see the following article:
-
After the upgrade of the APEX 4.2.0.6, I don't see any change
Hello
I have a production APEX running version 3.1. I downloaded APEX 4.2.0.6 and installed. I didn't remove the previous APEX users because I fear that it would change anything prevents existing applications runs properly.
When I connect to APEX http://xxxxxxx:7780/pls/apex / ,, I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
I can see there are users in the previous version. But I've not deleted the. What prevents the Apex 4.2 runnig?
SQL > SELECT username
2 FROM dba_users
3. WHERE (username AS USER OR name "FLOWS_ %" LIKE '% APEX_')
4 AND USERNAME NOT IN)
5. SELECT "FLOWS_FILES".
6 DOUBLE
7 UNION
8. SELECT 'APEX_PUBLIC_USER' FROM DUAL
9 UNION
10 SELECT SCHEMA s
11 FROM dba_registry
12 WHERE id_comp = 'APEX');
USERNAME
------------------------------
APEX_030200
I used this document to install APEX http://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#HTMIG839
Thank you for your help.
Christian
Hi Christian,
chipniz wrote:
Hello Kiran
I redid all installation steps and found that I now have this error:
Service temporarily unavailable
The server is currently unable to handle the request due to a temporary overloading or maintenance of the server.
When are you facing this error?
- Access to the APEX Oracle Application Builder (http://someserver:7780/pls/apex)
- Accessing an application in Oracle APEX (directly through URL viz. http://someserver:7780 / pls/apex/f? p = 123:101)
What kind of error is it?
- HTTP error with an error like 404 code
- Error on Web server with detailed description of the error (if so, check the newspapers of OSH for more information)
What is the type of the OHS?
- Oracle Application Server 10g
- Oracle HTTP Server distributed with Oracle Database 11g
Finally it is part of your question:
When I connect to APEX http://xxxxxxx:7780/pls/apex / , I don't see any change in the user interface. Where is the 4.2.0.6 APEX version?
What did you mean by that?
- You receive the login for the old version screen
- You receive a blank page
I would like to you check the following things:
- Check that the APEX_PUBLIC_USER account is unlocked. Please see section 3.5.5.2.1 on expiry of password in the Oracle 11 g database in https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJHJAG
- Check if you have copied the images properly after the upgrade. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#BHAJDGFJ
- Check that you have the correct configuration for images settings, the database connection string, user name and password database. Reference: https://docs.oracle.com/cd/E37097_01/install.42/e35123/otn_install.htm#CHDHCBGI
I hope this helps!
Kind regards
Kiran
Maybe you are looking for
-
Under OS 10.11.6, on iMac and MacBook Air iPad and iPhone running iOS 9.3.5. I can't sync my Contacts. Each device has a different set of Contacts. Help please.
-
Thanks for your help. I can look to iCloud by car and see its contents. However I can't iCloud pictures like this to see the content, etc. This is the reason why I wanted to disconnect from iCloud. I had hoped to reconnect and see if I could get then
-
HPE-400f: my newly installed SSD storage does not add to the top.
It shows 176 GB free of 232 GB which is 56 GB used. When I open the player and select the file and click with the right button on properties, it appears than 43.8 GB. Where do I use the extra 12 GB for? I have hidden files and folders showing. Also,
-
De : Sch202 I am currently using Windows Mail, I was for about 6 months, all of a sudden yesterday I can't send emails. I have several e-mail addresses that are sent to this main account... gmail, earthlink. The error I get isThe connection to the se
-
SDK 10.3.1 installation error
I try to install the SDK Blackberry 10.3.1. I have however Momentics IDE 2.1.1 installed on my machine (Windows 8.1 64-bit machine). However when I try to install the SDK this is throwing me error with the following details "There was an error in upd