Belarc Test - test failed due to not having a wired connection

Similar Questions

• Try to reinstall the printer and will not install due to not having Admin rights

  original title: Instalation printer

  Try to reinstall the printer and will not install due to not having Admin rights. I am the administrator,

  How can I continue?

  Thank you

  Right click on the printer software setup.exe, etc > run as admin.

  See you soon.

  Mick Murphy - Microsoft partner

• I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  I have a request, I am able to work with all applications, even if I am offline, not having no internet connection?

  Yes.

  You must be connected via the internet to install your programs cc, then at least once every 30 (monthly) or 91 days (sous-annuelle).

• I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.

  I can not get a wired connection on my Samsung laptop, model NP R780 J05uk.  In Device Manager, Ethernet controller has an error indicator, and when I click on properties says driver not installed.  I have asked for help to install through windows update, but found nothing.  On the site of Samsung nothing for this driver, only wireless.

  Hi Allan,

  Welcome to the Microsoft community. According to the description, you are unable to get a wired connection.

  I'll help you with this problem. I suggest you follow the steps in the article.

  Windows wireless and wired network connection problems

  I hope this helps. Let us know if you need help with Windows related issues. We will be happy to help you.

• A default gateway is not available: Wi-wired connections and has stopped working on my PC

  Hi all.

  Connections Wi-wired and on my PC have stopped working all of a sudden. I tried to restore my system to an older image, and he began to work for a while. He then stopped working again after a few hours, when I apply my updates of windows and other restorations (to the same restore point) didn't help. Troubleshooting, says that the default gateway is not available.  I already tried to renew that my ip and disable firewall and they do not seem to help. I am also unable to ping my default gateway. It is not a problem with the ISP, since I am able to connect using my laptop.
  I use an edge of dell wireless network adapter and use a realtek network card.
  Any help / pointers in the resolution of this matter will be highly appreciated.
  -ONE

  Ok. So, I finally found the real culprit. It was an update of McAfee, which cut the Internet. I ended up uninstalling McAfee and re - install the latest version. Found the solution through this post:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/Windows-7-cannot-connect-to-the-Internet/7ee7b350-3937-4b7a-bbc5-786b2333f4b2
  http://service.McAfee.com/FAQDocument.aspx?ID=TS101446

• Hard drive test failed, not found boot device

  I have a Pavilion dv7 1245dx with Windows Vista 64 bit bought 2009 at Best Buy.  He slid the arm of the couch on a carpet in stop down.  Next day started ok, entered into yahoo, facebook, then type of frozen.  Finally, don't do anything, turn off manually down, started upward. Black screen, "No. Bootable Device - Insert Boot disk and press any key". It will accept only the recovery disks that I made after the purchase. Starting test ok, ok, hard drive memory test failed 'Boot Drive not found'.  If it helps, caps lock is flashing.  I saw something in a forum on the reset or reinstall the hard drive but no explanantion how.  Can you help me?  And can you give me a ballpark figure on a new hard drive or better to buy a new laptop?  Laid off in Michigan, hoping to be able to get the unit up and running without having to consider.  Thank you very much for your help!

  Hello:

  Here is the link to the service manual for your laptop.

  Can be found in Chapter 4, procedures for removal and replacement of hard disk.

  http://h10032.www1.HP.com/CTG/manual/c01918142.PDF

  If removing and reinstalling the drive does not resolve the problem, then the hard drive is dead.

  I don't know what that means though the flashing light of caps.  This could be something more serious.

  A new hard drive will cost about $57.00.

  I hope the recovery discs, you did work on it as well. They should but no guarantee.

  http://www.Newegg.com/product/product.aspx?item=N82E16822148532

• 30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages.

  30.0 Firefox is so slow since updated. IE & Chrome not having problems loading pages, showing the blank pages, need two or more tests to open Web pages. It seems to have something to do with the Visual data on the pages. My MSN homepage gets old and dies every time I open the page after the re-opening and closing of firefox. It takes forever! What is a memory drain? Each open page in a new session of firefox suffer the same fate.

  Start Firefox in Safe Mode {web link}
  While you are in safe mode;
  Press < Alt > or < F10 > to display the toolbar.
  Followed;

  Windows; Tools > Options
  Linux; Edit > Preferences
  Mac; name of the application > Preferences

  Then Advanced > General.
  Find and stop using hardware acceleration.

  Dig safe web sites and see if there is still a problem. Then restart.

• Operating system not found on Equium - PXE - E61:Media test failed

  Hi all

  My daughter has a computer satellite laptop running XP.
  However, the system does not start and the following messages:

  PXE - test failed - check the cable for E61:Media
  PXE - M0F: output of the PXE Rom
  Operating system not found

  We do not have a disk operating system.

  What is the problem and how can I do for her?

  Hello

  For me, it seems that the HARD drive is dead and the laptop can not find the installed operating system.
  In this case, he tried to boot from different sources and finally LAN.
  But it does not and therefore, you get the PXE - E61:Media test failure error message.

  In my opinion, the HARD disk needs to be replaced and the operating system must be installed again.

  See you soon

• Test failed: the network adapter could not establish the connection

  Hi friends,
  I am trying to connect my database of Jdeveloper 11 g (ADF) it will be by mistake
  Test failed: the network adapter could not establish the connection
  could u please tell me all the solutions
  Thank you and best regards
  Jocelyne.

  Usual causes are:

  (a) you have a kind of firewall between you and the DB that prevents the connection
  (b) you use the wrong host/port/sid for your database

  John

• Targeted Read Test failed [error code: WHD16-CSB]

  I use a DELL Inspiron N530 desktop computer. Is my hard drive model: WDC WD2500AAJS-75VWA0 device. When I run a test of hardware of Dell Support Center. It showed the following error:targeted read Test failed (error code: WHD16-CSB)

  The unit has reported the following State: the previous self-test completed having the read element of the test failed.  The first default LBA value is 20750407 and the failure occurred after that the device was working since 23398 hours under tension. Failed (error code: WHD16-CSB)

  Please help me find a solution.

  The reader is 23398 market h years.  Thats 974 days or years 2.67.   If the drive is probably dying if not dead.

  Western Digital WD2500AAJS Caviar Blue drive is very common and inexpensive.

  The standard OEM warranty on these discs is 1 year and the retail warranty is 3 years from the date of manufacture if
  you do not have a retail receipt.

• SMART short Self Test Failed - (error code: WHD16-8NR)

  Hi all

  I had my XPS L520X for 4 years and 2 months. I've never had a problem with its operation until last week. Randomly, it restarted and came with the PCI Realtek issue when it restarts.

  To cut a very long story short Fault find it which is going on, I reinstalled the entire operating system, including formatting of the hard drive.

  The problem of the laptop different freeze/crash and reboot with erros while doing normal tasks has not been resolved.

  I have run the Dell support center software and it shows the auto SMART test failed with the following code (error code: WHD16-8NR).

  Event log:

  Dell Support Center log file
  March 17, 2016 16:53:55
  Overall result: failed

  -------------------------------------------------------------------------------------------------------------------------------------------
  ST9750420AS [ATA:0:0\\?\ide#diskst9750420as___0005dem1#4&34e0611c&0&0.0.0#{53f56307-b6bf-11d0-94f2-00a0c91efb8b]}
  -------------------------------------------------------------------------------------------------------------------------------------------

  Seller: Seagate
  Model number: ST9750420AS
  Serial number: 6WS100EG
  Firmware revision: 0005DEM1
  Size: 698,6 GB
  Rotation speed: 7200 RPM
  Cache size: 16 MB
  Temperature: 43 c
  Physical sector size: 4 KB
  Logical sector size: 512 B
  Count of logical sector: 1465149168
  Supported standards: ATA8-ACS, ATA/ATAPI-7, ATA/ATAPI-6, ATA/ATAPI-5
  Specification Version: Rev ATA8-ACS 4

  ----------------------------
  OS - C: [PARTITION:C\\.\C:\]
  ----------------------------

  File system: NTFS
  Volume serial number: 5087-8802
  Volume capacity: 679.00 GB
  Amount of free space: 568,63 GB
  Volume space used: 110,37 GB

  Test of the SMART State

  Test started - 17/03/2016 16:43:57
        
  Finished test:-17/03/2016 16:43:59
  Past

  Test of SMART thresholds

  Test started - 17/03/2016 16:43:59
        
  Finished test:-17/03/2016 16:44:01
  Past

  Targeted reading test

  Test started - 17/03/2016 16:44:01
        
  Finished test:-17/03/2016 16:44:05
  Past

  Try to search randomly

  Test started - 17/03/2016 16:44:05
        
  Finished test:-17/03/2016 16:44:54
  Past

  Funnel Seek Test

  Test started - 17/03/2016 16:44:54
        
  Finished test:-17/03/2016 16:46:14
  Past

  Short what SMART self-test

  Test started - 17/03/2016 16:46:14
        
  Error message:-17/03/2016 16:46:24
  The unit has reported the following State: the previous self-test completed having the read element of the test failed.
  Error message:-17/03/2016 16:46:25
  The first default LBA value is 121243744 and the failure occurred after that the device was working since 8792 hours under tension.
  Finished test:-17/03/2016 16:46:26
        Failed (error code: WHD16-8NR)

  Surface Scan Test

  Test started - 17/03/2016 16:46:26
        
  Finished test:-17/03/2016 16:47:25
  Past

  Surface Scan Test - 2

  Test started - 17/03/2016 16:47:25
        
  Finished test:-17/03/2016 16:48:58
  Past

  I also went in the BIOS BOOT MENU by pressing F12 at startup and ran diagnostics that seemed to have said everything going, however I saw a mistake, faliure in its process that was too fast for me to write the error.

  In a nutshell, my thought is that my hard drive has failed / is corrupted or is about to fail.

  My simple question is, do I need a new hard drive with the information I've provided?

  Thank you very much!

  To all those who read this topic:

  I rang Dell directly and they confirmed my hard drive needs to be replaced.

  8792 power over time, I think that its actually me good.

  Bravo and thanks for the reply ejn63

• SQL Developer: Failure-Test failed: IO error: got at least one by a CA read

  SQL Developer: Failure-Test failed: IO error: Got minus one since a call to reading
  
  Hello
  
  I'm sorry I know this is probably more frequently asked question, but I have no idea what I should get.
  I looked at the error message above to see if I could find a solution, but unfortunately I do not have.
  
  Right let me start with I'm a Total Noob... Well it terms of having to install Oracle 11 g myself.
  In my University they welcomed a database and we assigned to a user & pass it's how I was using SQL Developer,.
  but since I'm no longer a student at the University. I need to use the Oracle database.
  
  So I downloaded Oracle 11 g Enterprise installed on my laptop that I don't use much.
  Name of the database: Christiane
  
  It of the entire facility and seems to have succeeded, I went https://localhost:1158 / em (although not sure why em? what's the deal with that?) I thought that it would be Https://localhost:1158 / Christiane) anyway...
  Connected with the user of the System .
  Went to users and creates a named user: RUDUHR
  
  Thinking Yes its not work... go my other laptop open SQL Developer.
  
  Connection created with the following settings
  Name of con: RK
  User: RUDUHR
  Pass: TEST
  Con type: basic
  Role: by default
  Hostname: 192.168.0.8
  Port: 1158
  SID: Christiane
  
  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.
  
  I even tried to use SYSTEM user to connect, but same error
  also tried to change the SID to em, it made no difference I get the error message status: failure Test failed: IO error: Got minus one since reading call
  
  So are am clueless... LOL I only know how to create tables and stuff not how to set up a database.
  and just to let you know that I transfer the port on me correct portable router.

  It does not work well, why is that?
  192.168.0.8 is portable which oracle 11g installed and running.

  It's because you read the documentation.

  1158 is the default port for Enterprise Manager
  1521 is the default port for Sqlnet.
  Your port number is incorrect.

  Of course, you can create your tables in EM too.

  As by the Forums of the label of the post (first link when you arrive at this page) it is recommended that read the documentation before asking an another Doc issue yet.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• The user equivalence test failed for user 'oracle '.

  Hello
  
  I try to install the Clusterware Oracle 10g as part of my RAC installation.
  I have configured in RHEL 4 to 2 nodes (rac and rac2). But when I run the runcluvfy utility, I get the error below:
  
  [oracle@rac cluvfy] $./runcluvfy.sh stage pre - crsinst - rac n, rac2
  Conducting due diligence to install cluster services
  Audit accessibility of node...
  Check for accessibility of node is passed node "rac".
  Verify the equivalence of the user...
  The user equivalence test failed for user 'oracle '.
  The test failed on the nodes:
  RAC
  CAUTION:
  Equivalence of the user is not defined for nodes:
  RAC
  Audit will proceed to nodes:
  Rac2
  
  The problem is that with the first node (rac). The second node passes.
  SSH works fine. Don't know what the problem is!
  
  Thank you!

  Have you set up SSH for the equivalence of the user?
  Or
  Did you establish the user equivalence?
  If Yes... Please check...
  $ ssh hostname rac
  RAC
  $ ssh hostname rac2
  Rac2
  You should establish the equivalence before user...
  exec/usr/bin/ssh-agent $SHELL
  / usr/bin/SSH-Add

  If you do not configure ssh for the equivalence of the user
  http://www.Oracle.com/technology/pub/articles/smiley_rac10g_install.html
  Or
  read the SSH user equivalence is not defined on the remote nodes

• Satellite Pro A10 comes with: error IDE #0, PXE-E61media test failed

  I recently bought a used Toshiba Satellite pro A10.
  When I received it, it was working and being a noob I tried to install a network card and create a wireless network with my desktop using XP when it did not work I plugged my ethernet (from my desktop) cable on the laptop and flashed upwards with a small number can not? dll etc etc.

  Now I unplugged the ethernet cable and when I try to boot my laptop it comes up with:

  "ERROR IDE #0".
  Intel (r) bootagent, FE v4.1.09
  Copyright 1997-2002 Intel Corp.
  PXE - E61: Media test failed, check that the cables
  PXE - M0F: Exit Intel Boot Agent
  Insert system disk in drive
  Press any key ".

  HI Tom,

  The error message that you receive indicate that your laptop is trying to start the connection to the LAN rather than from his own hard drive or a CD-ROM. I suggest that you verify that the boot sequence is specified correctly in your BIOS, or alternatively, you can press F12 during your market and you should get the boot device menu sequence appears so that you can specify that you want to boot from your hard drive.

  Kind regards

• Pavilion Memory Test failed., ID 64W662-5066J2-XD7XGK-400V03 failure

  Crash... The BIOS memory test passes, but the HP Diagnostic memory test fails with the ID 64W662-5066J2-XD7XGK-400V03 failure.  Product ID VM298UA #ABA.  Any ideas?

  Hello

  Try the following.

  First, download the Memtest Image file (.) (ISO) on the following link.

  http://www.memtest.org/download/4.20/Memtest86+-4.20.ISO.zip

  It is a zipped file, if you do not have an extraction utility installed, download and install 7-Zip.  Please note that If you have a 64-bit installation, download and install the Installer x 64 64-bit .msi on the link below.

  http://www.7-zip.org/

  Then, right-click on the zipped file, select Extract 7 - Zip, select the files and then click Ok.  Open the newly extracted folder to find the Memtest Image.

  Now, you will need to use an application like ImgBurn to burn the ISO correctly on a blank CD - a guide on the use of ImgBurn to write that an ISO on a disc is here.

  When you created the CD, shut down the laptop.  Tap the escape key when you rewind to enter the Boot Menu.  Insert the Memtest CD.  Select 'Options of Boot' (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER to boot from the disc.

  At least 3-4 passes and see if errors are found.

  Kind regards

  DP - K