BELKIN ROUTER F5D8232-4 MODEL KEEPS RESTART AGAIN AND AGAIN

Similar Questions

• After the installation of Solaris 10 for x 86 U4 on my server ESXi 3.5, the host Solaris keeps restarting over and over again, no matter the type of virtual processor I choose, x 32 and x 64 both fail.

  I have this looked across the net and found a reasonable reason he could because of the bad virtual processor, but regardless of the x 32 or x 64, they keep them he shut down and restart all the time. could you give some help on this.

  and ideas would be very appreciated.

  Andy

  VMI is on or off?

  Have you tried to add PTIAs = off and apm = off to the kernel parameters?

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• Smartphones from blackBerry Pearl 9100 keeps restarting over and over again

  Hello

  Less than a few months ago, I had a new Pearl 9100. Two days ago I had to remove the battery and after I put the battery back on, the phone started to reset itself. It is the red light on the top right the start screen of Blackberry with white line where you can guess how much of the OS has loaded (percentage bar?)

  It loads about 1 to 2% of the bar and then it resets. I tried to reload the OS according to the scheme instructions on this site, but it is not possible, since the phone is not long enough for the upgrade.

  Any help will be greatly appreciated.

  Kind regards

  J

  Have you tried these steps to recharge your device software?

  1. check that the Desktop Manager and BlackBerry Device Software are installed on the computer.
  2 remove the battery from the BlackBerry. Do not re - insert.
  3. connect the BlackBerry to the computer.
  4. in the main screen of BlackBerry Desktop Manager, click on Application Loader.
  5. click on start.
  6. click on Options to select the applications to install.
  7. click on next.
  8. click Next.
  9. click on finish.
  10. when the load of the application starts, reinsert the battery into the BlackBerry.

  Thank you

• Belkin router low with USB for storage drive and Windows 7 do not get along?

  Hi all!

  We have a Belkin N wireless router + with a USB stick 'slot' in the back with the rest of the cables. The USB option is actually the only thing that made me buy the router in the 1st place! Anyway, it does not work when connected to the router, even if the network is running perfectly. It is a Seagate external hard drive and when it is plugged it's high lights of the page, there is no power cable so that it can be plugged into the wall. NTFS system I think. I use Windows 7. I tried so many different things, trying to connect this dag on drive to the router, I've exhausted all efforts, it seems. On belkin under my model site there a Belkin Storage Manager, but there isn't even a request, is just a plateau that is located on the bottom of my screen, the only thing I can do for her, is shut, it is the only command that opens. Oh and the website says also I can enter my routers address in IE followed by a slash and the name of my seagate... the drive is H, so I tried different versions of H:, tried FreeAgentDrive, etc...

  .. I think it is a windows problem, b/c not only not Seagate turn on, under the watch USB (via IE, default routers page layout), the connected router settings. In addition to the light on the front of the router is 'active', blue and work.

  HM... I run windows 7 Professional / 64-bit / don't know not what other information I have to give... I don't think that the external hard drive would have it's own IP address when you are connected to the router... could it? Also, my service is comcast with dynamic IP address assignments... so it would not stay dry alike... correct?

  Oh, and the external hard drive works wonderful connected directly to my laptop and an XP computer at work... so router maybe not is not talking computer properly the drive... I should have some sort of security "allowances" on this drive until I put it on belkin?

  I'm sorry this is a NOVEL, someone help please? I've been addressed under and turned off for a year... I get very frustrated with this!

  : D

  Try changing the drive letter and y or X. mohanad

• My computer is the stick in configuring updates 3 of 3 - do not stop your computer. It just keeps restarting itself and to return to this message

  I can't stop this constantcycle be in step 3 of 3, and then it restarts just itself.  This happened to someone else?  the ides on how to fix it?

  Hello

  I suggest you to follow the steps from the link and check.

  An update is not installed successfully when you try to install the update in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/949358

• BlackBerry Smartphones my BB Torch 9810 keeps restarting over and over

  My BB Torch 9810 is less than 3 months. Yesterday morning, I observed that he went. I have the battery fell, then I decided to load of Thoth. Then he began the start and restart and did not stop until now. My BB PIN is (personal information removed) there may be something that can be done remotely. His frustration I've been practically cut off. Please help me

  JEGESAM wrote:
  But I want to erase all the data and reistall OS, how is this possible when the phone does not illuminate?

  This article may be useful for you...

  • http://CrackBerry.com/BlackBerry-101-lecture-12-how-reload-operating-system-nuked-BlackBerry

  JEGESAM wrote:
  Will it be possible wihtout the battery inside?

  Normally, no.

  JEGESAM wrote:
  Must I be connected to the internet to get my reistalled OS?

  Depends on accuracy method you use... as a general rule, your PC must be connected to the Internet, but it does not matter that your BB is connected to (well, it needs to be connected to the PC, of course).

  JEGESAM wrote:
  I guess I asking to many questions

  There is no such thing as too many questions here...

  You can also benefit from BBSAK (BBSAK.ORG)... that is a good utility to attempt to recover a BB of. You will have to experiment a lot, though, to try to connect your BB to your PC/USB just at the right time in the boot sequence (as the loading bar progresses) in order so that it can be recognized and allow you to proceed.

  Here are some other items that might be useful:

  • http://adlen45.ActiveBoard.com/index.spark?forumid=123568&p=3&TopicId=18834966
  • http://forums.CrackBerry.com/Forum-F3/how-wipe-JL_Cmder-53502/
  • http://www.BlackBerryFAQ.com/index.php/How_do_I_wipe_the_BlackBerry_using_Jl_Cmder%3F
  • http://www.BlackBerryFAQ.com/index.php/What_to_do_next_if_Jl_Cmder_will_not_connect_and_wipe

  I'm sorry to give such a "shotgun" the value of things, but at a distance of internet, it is almost impossible to know exactly what the resolution might work in your particular situation, then I give you everything I have and hope you can find what works.

  Good luck and let us know!

• Router keeps restarting

  Router R7000 keeps restarting by itself. Called netgear, product being replaced twice, but eventually finds himself in the same situation. Sometimes works for days and then suddenly router keeps restarting itself every couple of minutes or hours. Can't believe router $200 would behave this way. Had changed the router to $30 and works like charm...

  NETGEAR doesn't seem to have any idea, makes me repeat the same steps for troubleshooting the script that I have by heart now.

  Everyone faced with a similar question... .all resolution?

  Hi Prime40633 and rowe100,

  I suggest you contact support as it may be a hardware problem.

• Printer HP LaserJet CM1415fnw range: my printer HP LaserJet CM1415fnw keeps restarting when connected to my ethernet router.

  I bought my printer HP Laserjet CM1415fnw color in 2013 (don't remember the exact date). The CM1415fnw printer is plugged into its own outlet and is related to a router NETGEAR Nighthawk for 2 years. My network and computers have not changed in the last 3 years.

  A month ago, July 2015, the printer started reboot itself on every few minutes.

  These are the things I've tried:

  1. I turned off the printer for several minutes through the turning off the switch on the side of the printer. This didn't solve my problem of restart.

  2. I turned off the printer during all night through the turning off the switch on the side of the printer. This didn't solve my problem of restart.

  3. I disconnected the printer from the outlet for several minutes and all night. printer. This didn't solve my problem of restart.

  4. I disabled the "WS-Discovery" setting to printer without success. He continued to restart.

  5. I turned off the printer and the nomad ethernet cable and cable telephone line of the printer. I then turned it on. He

  slept for hours without having to reboot. I plugged the ethernet cable and it continued to remain without restarting the computer for more than an hour. I then plugged the phone line cable and less than a minute the start printer restart again. I unplugged the cable line phone again and the printer stopped restarts. My wife and I have been printing happily.

  Solve the problem! NO! Last week, on July 27, 2015, the printer started reboot again. I went through the same steps as above, except that this time, whenever plugged in the ethernet cable, to the breast and a few minutes the printer would begin its restart. Some time between reboots there would be upward of long enough for a print job.

  Other things I've tried:

  1. I connected the printer directly to my computer workstation via USB and plugged the phone line cable. This great for hours of work. I could print jobs. No reboot. It is simply not the solution only when necessary. I need a network printer.

  2. I connected the printer directly to the ethernet port on my laptop with connected phone cable. It worked also. So, in this configuration, I took the opportunity to update the Firmware to date 20120216 to the 20140616.

  3. I reconnected it the printer to my router and the printer began to restart again in a few minutes.

  I noticed that between reboots, with the cable connected telephone line, anytime a phone rang in the printer immediately rebooted.

  I have mulitple home devices that rely on network connectivity to this printer. Statement of objections, now this printer is in offline mode to

  everyone. I need to get this problem resolved as soon as POSSIBLE.  I have a temporary work around the point #6. But I need a real solution. Can someone please.

  My Configuration:

  HP LaserJet CM1415fnw

  Number of trainer: QD51YOP
  Serial number: CNH8C9KRHB
  Service ID: 21334
  FIrmware Datecode: 20140616
  Telcom Version: 04/15/01
  Controller number: 4

  I want to thank you davidzuts and muj851 for your quick response and your help in this issue.

  I'll give you the short history of my troubleshooting efforts and solution.

  I was able to isolate restarting the printer to the computer of my wife which found in another part of the House. Anytime that I connected to his computer the printer network would start to restart within one minute. I then uninstalled all HP printer software. I reconnected it then his computer to the network. Less than a minute, the printer is entered in restart mode. After a few install and uninstall drivers HP printer soffware and I took notice that the device to print to my printer still appeared after you have uninstalled the software and drivers. I clicked on the printing device and deleted manually. After restarting the computer in a few minutes, that there was a system message stating that the device driver is to be installed.

  Reinstall the drivers and the printer software to create a new instance of the CM1415FNW all-in. Uninstalling all deleted, but Moose printing device. Connected to the network caused the printer restart. Thus, looked at the queue of the printer and found that it was a document in the queue to be printed. The status of the printer showed that the document was ready for printing, but would restart the printer and the State would appear as a printing ERROR.

  I cancelled the print job and the document in the queue has been removed. I then removed the printing device. When I connected my wife for the network printer computer do not restart. I have software HP printer for printer CM1415FNW reinstatlled and everything is working very well for the last two days.

  A conversation with my wife discovered that the day where all the problems with the printer started she tried to print a Barnes and noble discount coupon. Something with formatting printer or N & B coupon codes caused the printer restart.

  The next time this happens, I know to check the print queue.

• My Belkin router has stopped working. After talking to Belkin support, we got it to work, but I can't access the site of iiNet connection.

  original title: Wireless router problems

  My Belkin router has stopped working the other day, so I tried the usual stuff (turning on an etc) in the end rang Belkin and after about an hour the router started working again, but would go only on the iiNet connection site! Go figure, not even with them. The woman to the Belkin told me to ring my ISP I did, and they got me online, however, my printer, the laptop and the iPhone is no longer will connect wireless. They were all working perfectly before the router dropped out.

  I went through all the procedures that several times. Uninstalled and reinstalled the printer and the router... still does not work.

  The printer can not just to find the wireless network. The test report said that everything went except the SSID, which has been a FAILURE. How can this be when I haven't changed the

  SSID?

  I've updated as well.

  Hoping really frustrated, can someone help!
  Thanks in advance!

  Hello

  1 are there any changes or updates made on the computer before the show?

  2. What is the exact model of the router number?

  3. do you get an error message? If Yes, what is the full and exact error message?

  4. what operating system is installed on the computer?

  Method 1:

  Check the link and try to run the troubleshooter to check if it helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Check out the links and check if that helps:

  Solve problems, find wireless networks

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-finding-wireless-networks

  The link applies to the Windows Vista and Windows 7 operating system.

  Problems of network with a router in Windows XP

  http://support.Microsoft.com/kb/315978

• Booted XP went into the mode options regurly of open windows, or knowledge last configuration or safe mode. No matter what I choose, keeps restart and return to this page

  Original title: frozen configuration page

  My laptop running windows xp pro was fine, when I went to bed last night, but this morning I woke and went to use the lt and it started as usual but then in a mode options regurly windows open or to last working configuration, or 3 safe mode options. And no matter what I choose, it keeps restart and return to this page and has continually repeated the same steps over and over again... someone can please help me with this?

  It seems that your XP hangs for some reason any...

  Why do we know almost nothing about your system (except a laptop with XP Pro)?  I know this isn't your fault...

  Please answer these questions and to implement the following:

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The question was preceded by a loss of power, aborted reboot or abnormal termination?  (this includes the plug pulling, buttons power, remove the battery, etc.)

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If there is a problem starting, XP is configured to automatically try to start again and you can stuck in a loop not being able to go beyond the screen boot options, or none of these startup options you choose will work only.

  Sometimes, when XP has a problem starting or falls down and tries to start again, it will give you a "short" menu of boot options and none of them will appear to be good to get your system going again.  You have tried them all!

  The options are similar to the Advanced Boot Options menu XP, but the only option that you need (disable automatic error system reboot) are not offered, because XP went too far during the boot process and offers a limited number of boot options.

  If this is the case, you must call Options menu advanced boot yourself until you do not see the option:

  Disable the automatic restart in the event of system failure

  When you get the XP Advanced Options correct start menu you want to see, he has options on it like these:

  Safe mode
  Safe mode with networking
  Safe mode with command prompt

  Enable Boot logging
  Enable VGA mode
  Last good Configuration known (your most recent settings that worked)
  Directory Services Restore Mode (Windows domain controllers only)
  Debug mode
  Disable the automatic restart in the event of system failure

  Start Windows normally
  Reset
  Return to OS Choices Menu

  You need to choose in this menu is the option:

  Disable the automatic restart in the event of system failure
  
  Then if XP does not start normally, you will see an error screen with information and clues about the problem and then you can decide what to do next.

  If you do not see the automatic restart on system failure option turn it off, you must reset your system and start typing the key F8 on the keyboard until you see her disable automatic restart on system failure option.

  If you miss the window of opportunity F8, you must try again and start tapping the F8 key with more urgency (earlier and more frequently) until you see disable automatic restart on system failure, and then select.

  You must keep trying the F8 menu until you see disable automatic restart on system failure option, and select it.

  If your system has a Blue Screen of Death (BSOD), we need to know what the screen says:

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Send for the nose and the Red arrows (3 to 4 lines total).

  Send all * line STOP message since there are clues in the 4 parameters.

  If it looks like there is some kind of name listed in the STOP message file, send this line also.

  Ignore the boring text unless it seems important to you.  We know what a BSOD looks like, we need to know what your BSOD looks like.

  Answering queries and results report of the disable automatic restart on system failure screen and you can decide what to do next.

• CM100 modem does not work with BELKIN router

  Hello

  I just bought a CM100 used on eBay, so I can get rid of my Charter rental, but it doesn't seem to work with my BELKIN router.

  The model number is BELKIN F5D7230-4. I tried everything, but the 'CONNECT' led will continue to Flash.

  I thought it was my mode, but when I bought a new LINKSYS WRT54G2 router, it works perfectly.

  Could someone help me please? If I can't use the BELKIN one, I'll keep the new router LINKSYS, suggestions?

  Thank you!

  (Mod Note: under the direction of compliance from the forums.)

  As CM100 works with the WRT router... This means that there is no problem with the CM100... If the Belkin router does not work then, you make the Belkin router settings. Your modem CM100 is absolutely perfect...

• I update my iMac and then the computer restart again and write this means to report panic about what I can do?

  Hi, I'm updating my iMac and after that it restart again and write this panic report. Pleas if somebody know what can I do please help me

  Anonymous UUID: F566129E-3EB9-4E28-4DF3-63D440FEBBB2

  Kills Jul 26 14:32:01 2016

  Panic report *.

  panic (the appellant 2 cpu 0xffffff800dbb3bf2): "pointers element of invalid queue for 0xffffff8024cb0a40: 0 0"@/Library/Caches/com.apple.xbs/Sources/xnu/xnu-3248.60.10/osfmk/kern/queue.h prev: 241.

  Backtrace (2 CPU), Frame: Return address

  0xffffff918935b440: 0xffffff800dadab52

  0xffffff918935b4c0: 0xffffff800dbb3bf2

  0xffffff918935b640: 0xffffff800db508dc

  0xffffff918935b710: 0xffffff800dae430a

  0xffffff918935b750: 0xffffff800dfa228e

  0xffffff918935b790: 0xffffff800e004324

  0xffffff918935b7d0: 0xffffff800dfee5da

  0xffffff918935b7f0: 0xffffff800dd383e8

  0xffffff918935b830: 0xffffff800dd37fa8

  0xffffff918935b890: 0xffffff800dd26ea7

  0xffffff918935b8f0: 0xffffff800dd1a79f

  0xffffff918935b9a0: 0xffffff800dd06358

  0xffffff918935bbe0: 0xffffff800dd06e70

  0xffffff918935bf60: 0xffffff800e028380

  0xffffff918935bfb0: 0xffffff800dbeca58

  The process corresponding to the current thread BSD name: AdobeUpdateDaemo

  Mac OS version:

  15G 31

  Kernel version:

  15.6.0 Darwin kernel version: Thu Jun 23 18:25:34 PDT 2016; root:XNU-3248.60.10~1/RELEASE_X86_64

  Kernel UUID: B5AA8E3E-65B6-3D0E-867B-8DCCF81E536C

  Slide kernel: 0x000000000d800000

  Text of core base: 0xffffff800da00000

  Text __HIB base: 0xffffff800d900000

  Name of system model: iMac12, 2 (Mac-942B59F58194171B)

  Availability of the system in nanoseconds: 94483899823

  last load kext to 53361190473: com.apple.driver.AppleBluetoothHIDKeyboard 181 (addr 0xffffff7f8fadd000, size 16384)

  kexts responsible:

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.AppleHWSensor 1.9.5d0

  com.apple.driver.AppleTyMCEDriver 1.0.2d2

  com.apple.driver.AGPM 110.22.0

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AppleBluetoothMultitouch 90.3

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.driver.AppleMikeyHIDDriver 124

  com.apple.driver.AppleMikeyDriver 274.12

  3.12.8 com.apple.driver.ApplePolicyControl

  com.apple.driver.AppleHDAHardwareConfigDriver 274.12

  com.apple.driver.AppleHDA 274.12

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.kext.AMDFramebuffer 1.4.2

  com Apple.Driver.pmtelemetry 1

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.AMDRadeonX3000 1.4.2

  com.apple.driver.AppleIntelHD3000Graphics 10.0.0

  3.12.8 com.apple.driver.AppleMuxControl

  com.apple.iokit.IOBluetoothSerialManager 4.4.6f1

  com.apple.driver.AppleThunderboltIP 3.0.8

  com.apple.driver.AppleBacklight 170.8.9

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.driver.AppleSMCPDRC 1.0.0

  com.apple.driver.AppleLPC 3.1

  com.apple.kext.AMD6000Controller 1.4.2

  com.apple.driver.AppleIntelSNBGraphicsFB 10.0.0

  com.apple.driver.AppleSMCLMU 208

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.ACPI_SMC_PlatformPlugin 1.0.0

  com.apple.driver.AppleFIVRDriver 4.1.0

  com.apple.driver.AppleMCCSControl 1.2.13

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.iokit.IOBluetoothUSBDFU 4.4.6f1

  com.apple.iokit.SCSITaskUserClient 3.7.7

  com.apple.driver.AppleIRController 327,6

  com.apple.driver.AppleUSBStorageCoexistentDriver 3.7.1

  com.apple.driver.AppleUSBCardReader 3.7.1

  com.apple.driver.AppleFileSystemDriver 3.0.1

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 38

  2.8.5 com.apple.iokit.IOAHCIBlockStorage

  com.apple.iokit.AppleBCM5701Ethernet 10.2.0

  com.apple.driver.AppleAHCIPort 3.1.8

  com.apple.driver.AppleFWOHCI 5.5.4

  com.apple.driver.AirPort.Atheros40 700.74.5

  com.apple.driver.usb.AppleUSBUHCIPCI 1.0.1

  com.apple.driver.usb.AppleUSBEHCIPCI 1.0.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleACPIButtons 4.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 4.0

  com.apple.driver.AppleAPIC 1.7

  com.apple.driver.AppleIntelCPUPowerManagementClient 218.0.0

  com Apple.NKE.applicationfirewall 163

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com.apple.driver.AppleIntelCPUPowerManagement 218.0.0

  com.apple.driver.AppleBluetoothHIDKeyboard 181

  com.apple.driver.AppleHIDKeyboard 181

  com Apple.kext.Triggers 1.0

  com.apple.driver.IOBluetoothHIDDriver 4.4.6f1

  com.apple.driver.AppleMultitouchDriver 304.12

  com.apple.driver.AppleHIDTransport 5

  com.apple.driver.DspFuncLib 274.12

  com.apple.kext.OSvKernDSPLib 525

  com.apple.iokit.IOSurface 108.2.3

  com.apple.iokit.IOAcceleratorFamily2 205.11

  3.12.8 com.apple.driver.AppleGraphicsControl

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOFireWireIP 2.2.6

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.iokit.IONDRVSupport 2.4.1

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.4.6f1

  com.apple.iokit.IOBluetoothFamily 4.4.6f1

  com.apple.driver.AppleHDAController 274.12

  com.apple.iokit.IOHDAFamily 274.12

  com.apple.iokit.IOAudioFamily 204.4

  com.apple.vecLib.kext 1.2.0

  com.apple.driver.AppleThunderboltEDMSink 4.1.1

  com.apple.kext.AMDSupport 1.4.2

  3.12.8 com.apple.AppleGraphicsDeviceControl

  com.apple.driver.AppleSMBusPCI 1.0.14d1

  com.apple.driver.IOPlatformPluginLegacy 1.0.0

  com.apple.driver.IOPlatformPluginFamily 6.0.0d7

  com.apple.driver.AppleSMBusController 1.0.14d1

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.CoreCaptureResponder 1

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.iokit.IOSCSIMultimediaCommandsDevice 3.7.7

  com.apple.iokit.IOBDStorageFamily 1.8

  com.apple.iokit.IODVDStorageFamily 1.8

  com.apple.iokit.IOCDStorageFamily 1.8

  com.apple.iokit.IOAHCISerialATAPI 2.6.2

  com.apple.iokit.IOUSBHIDDriver 900.4.1

  com.apple.iokit.IOUSBMassStorageClass 4.0.2

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.7

  com.apple.iokit.IOUSBMassStorageDriver 1.0.0

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.7

  com Apple.Driver.USB.cdc 5.0.0

  com.Apple.Driver.USB.Networking 5.0.0

  com.apple.driver.usb.AppleUSBHostCompositeDevice 1.0.1

  com.apple.driver.usb.AppleUSBHub 1.0.1

  com.apple.driver.AppleThunderboltDPInAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPOutAdapter 4.1.3

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.1.3

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  com.apple.driver.AppleXsanScheme 3

  com.apple.driver.AppleThunderboltNHI 4.0.4

  com.apple.iokit.IOThunderboltFamily 6.0.2

  com.apple.iokit.IOEthernetAVBController 1.0.3b3

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.driver.AppleUSBMergeNub 900.4.1

  com.apple.iokit.IOAHCIFamily 2.8.1

  4.6.1 com.apple.iokit.IOFireWireFamily

  com.apple.iokit.IO80211Family 1110.26

  com.apple.iokit.IONetworkingFamily 3.2

  com Apple.Driver.corecapture 1.0.4

  com.apple.driver.usb.AppleUSBUHCI 1.0.1

  com.apple.iokit.IOUSBFamily 900.4.1

  com.apple.driver.usb.AppleUSBEHCI 1.0.1

  com.apple.iokit.IOUSBHostFamily 1.0.1

  com.apple.driver.AppleUSBHostMergeProperties 1.0.1

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 417,4

  com.apple.iokit.IOStorageFamily 2.1

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 4.0

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  com Apple.KEC.corecrypto 1.0

  Model: iMac12, 2, IM121.0047.B23 of BootROM, 4 processors, Intel Core i5 2.7 GHz, 12 GB, MSC 1.72f1

  Graphics card: AMD Radeon HD 6770 M, AMD Radeon HD 6770 M, PCIe, 512 MB

  Memory module: BANK 0/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020

  Memory module: BANK 1/DIMM0, 2 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333235533642465238432D48392020

  Memory module: 0/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0 x 0198, 0x393930353432382D3035312E4130304C4620

  Memory module: 1/DIMM1 BANK, 4 GB DDR3, 1333 MHz, 0 x 0198, 0x393930353432382D3035312E4130304C4620

  Airport: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.74.0 - P2P

  Bluetooth: Version 4.4.6f1 17910, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en1

  Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB

  Serial ATA Device: OPTIARC DVD RW AD - 5680H

  USB device: USB 2.0 Bus

  USB device: FaceTime HD camera (built-in)

  USB device: Hub

  USB device: Hub BRCM2046

  USB Device: USB Bluetooth host controller

  USB device: USB 2.0 Bus

  USB device: Hub

  USB Device: IR receiver

  USB Device: Card reader

  Bus crush: iMac, Apple Inc., 22.1

  First remove all the third-party RAM installed on the computer and re - built-in. Then, restart and test, whether the KIMBERLEY process continues to have a barrette of faulty RAM MEMORY.

  Finally, what third party RAM brand has been installed? In these forums, because the iMacs are sensitive and benefit from the high quality of RAM, the Crucial two (buy it direct) and the two OWC (www.macsales.com) RAM are recommended because of their high quality and reasonable price. You can also have another hardware problem, in your case I would try to boot from the Partition Recovery (command + R to start) and open disk utility to see if the boot disk is found. You can also use Apple Hardware Test or Apple Diagnostics according to the age of the computer to run a test to see if two applications can detect any material error.

• MacBook Pro retina 2014 keeps restarting

  Hello

  My refurbished Macbook Pro has been reset continually in recent days, but done so much since I got the computer. I don't have a problem out of it first because it was only a few days, but now it's annoying, because sometimes I'm in the middle of a report and it resets any chance. If anyone can help me understand how to solve this problem, I would really appreciate it.

  That's what the report said that when the computer restarts again...

  Anonymous UUID:

  277B4EA4-9058-B2A7-1363-7AD57DA93BDD

  Kill Mar 29 16:19:37 2016

  Panic report *.

  panic (cpu 0 0xffffff8011a16df2 appellant): Kernel trap at 0x00000001001a0912, type 14 = page fault, registers:

  CR0: 0 X 0000000080010033, CR2: 0X00000001001A0912 CR3: 0X00000001A4ECD049 CR4: 0X00000000001627E0

  RAX: 0XFFFFFF8037198000, RBX: 0XFFFFFF80250DD000 RCX: 0 X 0000000000000001, RDX: 0X7FFFFFFFFFFFFFFF

  RER: 0XFFFFFF801DD8BB78, RBP: 0XFFFFFF801DD8BBC0, IHR: 0 X 0000000000000002 RDI: 0XFFFFFF8037198400

  R8: 0X00000000000002A7, R9: 0XFFFFFF801579C388, R10: 0 X 0000000000000000, R11: 0XFFFFFF8026ABDD20

  R12: 0XFFFFFF8012112F48, R13: 0XFFFFFF8012029750, R14: 0XFFFFFF8037198400 R15: 0XFFFFFF803716EC00

  RFL: 0 X 0000000000010282, RIP: 0X00000001001A0912, CS: 0000000000000008, SS 0 X: 0 X 0000000000000010

  Lack of CR2: 0x00000001001a0912, error code: 0 x 0000000000000011, CPU fault: lack of NX RID/user of 0x0

  Backtrace (CPU 0), frame: return address

  0xffffff801dd8b820: 0xffffff801192ad21

  0xffffff801dd8b8a0: 0xffffff8011a16df2

  0xffffff801dd8ba60: 0xffffff8011a33ca3

  0xffffff801dd8ba80: 0x1001a0912

  0xffffff801dd8bbc0: 0xffffff7f93904a68

  0xffffff801dd8bc00: 0xffffff7f93913b95

  0xffffff801dd8bc30: 0xffffff7f93905479

  0xffffff801dd8bc50: 0xffffff7f9396a6a8

  0xffffff801dd8bc70: 0xffffff7f939052dc

  0xffffff801dd8bca0: 0xffffff7f939136a1

  0xffffff801dd8bd00: 0xffffff8011eb6631

  0xffffff801dd8bd50: 0xffffff8011efde62

  0xffffff801dd8bdc0: 0xffffff80119e17de

  0xffffff801dd8be10: 0xffffff801192ef8c

  0xffffff801dd8be40: 0xffffff80119139f3

  0xffffff801dd8be90: 0xffffff801192429d

  0xffffff801dd8bf10: 0xffffff8011a0231a

  0xffffff801dd8bfb0: 0xffffff8011a344c6

  	Extensions of core in backtrace:
  	com.apple.iokit.IOAcceleratorFamily2 (156.16) [1259B80F-E4C5-3BC9-BED5-65B42289E8C 0]@0xffffff7f938e9000-> 0xffffff7f93957fff]
  	dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f92124000 0xffffff
  	dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f929c7000
  	com.apple.driver.AppleIntelHD5000Graphics (10.0.6) [8B5EFA23 - 04D 4-3D2E-8520-512245 DE51BD]@0xffffff7f93966000-> 0xffffff7f939c5fff]
  	dependency: com.apple.iokit.IOSurface (97.4) [A4AE35B7-0C17-38F2-AD0D-A4C4B40196FB] @0xffffff7 f9289f000
  	dependency: com.apple.iokit.IOPCIFamily (2.9) [05578B0B-C99C-3A87-9F3E-B4746D19CEF4] @ 7f92124000 0xffffff
  	dependency: com.apple.iokit.IOGraphicsFamily (2.4.1) [8922721D-5517-3883-BD3A-57422D0244A0] @0 xffffff7f929c7000
  	dependency: com.apple.iokit.IOAcceleratorFamily2 (156.16) [1259B80F-E4C5-3BC9-BED5-65B42289E8 C0]@0xffffff7f938e9000

  Corresponding to the current thread BSD process name: plugin-container

  Mac OS version:

  14F1509

  Kernel version:

  14.5.0 Darwin kernel version: kills Sep 1 21:23:09 PDT 2015; root:XNU-2782.50.1~1/RELEASE_X86_64

  Kernel UUID: 06D286E3-A8A1-3BE7-A7EB-EAC6E0C69758

  Slide kernel:

  0 x 0000000011600000

  Text of core base: 0xffffff8011800000

  Text __HIB base: 0xffffff8011700000

  Name of system model: MacBookPro11, 1 (Mac-189A3D4F975D5FFC)

  Availability of the system in nanoseconds: 3336442471206

  last load kext to 4307476898: com.apple.filesystems.autofs 3.0 (addr 0xffffff7f9347f000 size 45056)

  Finally unloaded kext to 147183012433: com.apple.driver.AppleIntelLpssI2C 2.0.57 (addr 0xffffff7f938c6000 size 36864)

  kexts responsible:

  com Apple.filesystems.autofs 3.0

  com.apple.driver.AudioAUUC 1.70

  com.apple.driver.ApplePlatformEnabler 2.2.0d4

  com.apple.driver.AGPM 110.19.6

  com.apple.driver.X86PlatformShim 1.0.0

  com.apple.iokit.IOBluetoothSerialManager 4.3.6f3

  com.apple.driver.AppleHDA 272.18.3

  com.apple.driver.AppleUpstreamUserClient 3.6.1

  com.apple.driver.AppleOSXWatchdog 1

  com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.driver.AppleLPC 1.7.3

  com.apple.driver.AppleSMCLMU 2.0.7d0

  com.apple.driver.AppleThunderboltIP 2.0.2

  com.apple.driver.AppleCameraInterface 5.36.0

  com.apple.iokit.IOUserEthernet 1.0.1

  com.apple.Dont_Steal_Mac_OS_X 7.0.0

  com.apple.driver.AppleHWAccess 1

  com.apple.driver.AppleHV 1

  com.apple.driver.AppleIntelSlowAdaptiveClocking 4.0.0

  com.apple.driver.AppleBacklight 170.7.4

  com.apple.driver.AppleMCCSControl 1.2.12

  com.apple.driver.AppleIntelHD5000Graphics 10.0.6

  com.apple.driver.AppleIntelFramebufferAzul 10.0.6

  com.apple.driver.AppleUSBTCButtons 240.2

  com.apple.driver.AppleUSBCardReader 3.5.5

  com.apple.driver.AppleUSBTCKeyboard 240.2

  com.apple.driver.AppleUSBHub 705.4.2

  com.apple.AppleFSCompression.AppleFSCompressionTypeDataless 1.0.0d1

  com.apple.AppleFSCompression.AppleFSCompressionTypeZlib 1.0.0

  com.apple.BootCache 36

  com.apple.driver.XsanFilter 404

  com.apple.iokit.IOAHCIBlockStorage 2.7.1

  com.apple.driver.AppleAHCIPort 3.1.2

  com.apple.driver.AirPort.Brcm4360 930.37.3

  com.apple.driver.AppleUSBXHCI 710.4.11

  com.apple.driver.AppleSmartBatteryManager 161.0.0

  com.apple.driver.AppleACPIButtons 3.1

  com.apple.driver.AppleRTC 2.0

  com.apple.driver.AppleHPET 1.8

  com.apple.driver.AppleSMBIOS 2.1

  com.apple.driver.AppleACPIEC 3.1

  com.apple.driver.AppleAPIC 1.7

  com Apple.NKE.applicationfirewall 161

  com Apple.Security.Quarantine 3

  com.apple.security.TMSafetyNet 8

  com Apple.kext.Triggers 1.0

  com.apple.driver.DspFuncLib 272.18.3

  com.apple.kext.OSvKernDSPLib 1.15

  com.apple.iokit.IOBluetoothHostControllerUSBTransport 4.3.6f3

  com.apple.iokit.IOUSBUserClient 705.4.0

  com.apple.driver.AppleHDAController 272.18.3

  com.apple.iokit.IOHDAFamily 272.18.3

  com.apple.iokit.IOAudioFamily 203.3

  com.apple.vecLib.kext 1.2.0

  com.apple.iokit.IOSerialFamily 11

  com.apple.iokit.IOBluetoothFamily 4.3.6f3

  com.apple.iokit.IOSlowAdaptiveClockingFamily 1.0.0

  com.apple.driver.X86PlatformPlugin 1.0.0

  com.apple.driver.IOPlatformPluginFamily 5.9.1d7

  com.apple.driver.AppleBacklightExpert 1.1.0

  com.apple.driver.AppleSMC 3.1.9

  com.apple.driver.AppleSMBusController 1.0.13d1

  com.apple.iokit.IOSurface 97.4

  com.apple.iokit.IONDRVSupport 2.4.1

  3.10.25 com.apple.AppleGraphicsDeviceControl

  com.apple.iokit.IOAcceleratorFamily2 156.16

  com.apple.iokit.IOGraphicsFamily 2.4.1

  com.apple.iokit.IOSCSIBlockCommandsDevice 3.7.5

  com.apple.iokit.IOUSBMassStorageClass 3.7.2

  com.apple.iokit.IOSCSIArchitectureModelFamily 3.7.5

  com.apple.driver.AppleUSBMultitouch 245.2

  com.apple.iokit.IOUSBHIDDriver 705.4.0

  com.apple.driver.AppleUSBMergeNub 705.4.0

  com.apple.driver.AppleUSBComposite 705.4.9

  com.apple.driver.CoreStorage 471.30.1

  com.apple.iokit.IOAHCIFamily 2.7.5

  com.apple.driver.AppleThunderboltDPInAdapter 4.0.6

  com.apple.driver.AppleThunderboltDPAdapterFamily 4.0.6

  com.apple.driver.AppleThunderboltPCIDownAdapter 2.0.2

  3.1.7 com.apple.driver.AppleThunderboltNHI

  com.apple.iokit.IOThunderboltFamily 4.2.2

  com.apple.iokit.IO80211Family 730.60

  com.apple.driver.mDNSOffloadUserClient 1.0.1b8

  com.apple.iokit.IONetworkingFamily 3.2

  com.apple.iokit.IOUSBFamily 720.4.4

  com.apple.driver.AppleEFINVRAM 2.0

  com.apple.driver.AppleEFIRuntime 2.0

  com.apple.iokit.IOHIDFamily 2.0.0

  com.apple.iokit.IOSMBusFamily 1.1

  com Apple.Security.sandbox 300.0

  com.apple.kext.AppleMatch 1.0.0d1

  com.apple.driver.AppleKeyStore 2

  com.apple.driver.AppleMobileFileIntegrity 1.0.5

  com.apple.driver.AppleCredentialManager 1.0

  com.apple.driver.DiskImages 398

  com.apple.iokit.IOStorageFamily 2.0

  com.apple.iokit.IOReportFamily 31

  com.apple.driver.AppleFDEKeyStore 28.30

  com.apple.driver.AppleACPIPlatform 3.1

  com.apple.iokit.IOPCIFamily 2.9

  com.apple.iokit.IOACPIFamily 1.4

  com Apple.KEC.corecrypto 1.0

  com.apple.kec.Libm 1

  com Apple.KEC.pthread 1

  Model: MacBookPro11, 1, MBP111.0138.B16 BootROM, 2 processors, Intel Core i5, clocked at 2.6 GHz, 8 GB, MSC 2.16f68

  Graphics card: Intel Iris, Iris Intel integrated

  Memory module: DIMM0/0 BANK, 4 GB DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453120

  Memory module: DIMM0/1 BANK, 4 GB DDR3, 1600 MHz, 0x802C, 0x384B54463531323634485A2D314736453120

  Airport: spairport_wireless_card_type_airport_extreme (0x14E4, 0 x 112), Broadcom BCM43xx 1.0 (7.15.166.24.3)

  Bluetooth: Version 4.3.6f3 16238, 3 services, 27 aircraft, 1 incoming serial ports

  Network service: Wi - Fi, AirPort, en0

  Serial ATA Device: APPLE SD0128F, 121,33 GB SSD

  USB device: Memory card reader internal

  USB device: Apple keyboard / Trackpad

  USB device: Hub BRCM20702

  USB Device: USB Bluetooth host controller

  Bus crush: MacBook Pro, Apple Inc., 17.2

  This kind of panic can be caused by a bug in OS X, or by a hardware failure. I suggest that you upgrade to the current version ("El Capitan") in the App Store and see if the panic stop.

  Before the upgrade, verify that all of your most important third-party software are up-to-date and compatible with current versions of old OS X. Very Microsoft and Adobe products, for example, may not be compatible. The Web site is the best source for this information.

  Incompatible third-party software causes almost all problems with OS X updates.

  Finally, in back up all the dataand be sure you know how to restore if you don't like the results of the upgrade.

  If you have a with a sufficient capacity storage device, you can copy the boot volume in disk utility, then run him and to upgrade. So, if you don't like the results, all you have to do is change the setting in the startup disk preferences pane and restart.

• Satellite P300 itself keeps restarting after the initial splash screen.

  My Satellite P300 itself keeps restarting after the initial splash screen.

  Start-up of the first screen with the F2 and F12 options down is displayed, the screen goes black, then a cursor appears in the upper left corner and flashes once or twice. Then the laptop stops and restarts and goes through the same process again and again.

  That's all with the power adapter is plugged in. If disconnected, he goes through the above process and close with no reboot.

  Any help or advice would be much appreciated.

  Post edited by: aic-poppy

  Start your laptop and enter the settings of the BIOS (F2). Set to its default value. Restart your computer, and press F8 to access the advanced boot menu.
  To start the laptop in safe mode and let us know if it works, try it please.

• Satellite L655-1E3 keeps restarting in an infinite loop

  Hello

  It seems that I have installed an update of the BIOS not adapted to my Satellite L655 1E3. Now my laptop is never reach the Windows startup and keeps restarting in all about 3 seconds after the Toshiba screen display.

  What I tried to do is reinstall my Windows with the Windows CD: does not not when starting on the CD/DVD

  I still have access to my data located in the hard drive when I took it out of the laptop and makes a transfer on the other hard drive.

  Can you please help me and suggest me some ideas to do?

  > It seems that I have installed an update of the BIOS not adapted to my Satellite L655 1E3.

  I m wondering how could I know if you would try to update the BIOS to the version that is not compatible, the BIOS update procedure would be interrupted and it is not possible to Flash the ROM module
  That is why I think this might be the case.

  However, you said that you see the Toshiba start screen.
  Question: are you able to access the BIOS of the F2 keys?

  In the case where this is possible, the value of the default BIOS and try to start the machine again.
  Where this is not possible, remove the AC adapter and the battery.
  Press and hold the power button / stop along 30 sec. Then reconnect both sides and try to turn on the unit.

  Your comments and good luck would be appreciated