Benefits of control MOD

Similar Questions

• Tree control mode: Returns a validation event when the NORMAL value

  CVI 2013: I am writing a software to change the command tree modes based on the user's selection. I noticed that when the command is set to NORMAL, I got a "EVENT_COMMIT". Just for reference, I am using a custom control - group of Radio buttons, but the bug (I'm assuming that) is in the tree control are I forgot something?

  An application of Corrective Action (CAR) has been filed for this behavior. His number is 578618. You can monitor the condition of this CAR by checking the notes Readme or release new versions and checking the bug fixes section.

• Qosmio X 505-Q898 - can't get the backlit keyboard and switch mode

  I got this laptop two days ago and I already realized that I cannot get my backlight keyboard, even though it says on the label next to the touchpad it is a backlit keyboard model. I have checked everywhere and can't find out how he backlight. I tried FN + Z and it did not work, the only thing that works with the FN is F (F1 - F12) keys and it's really frustrating because the backlit keys is a great thing for me, I chose the model on the model for this reason i5 i7 exact.

  I also noticed that in the BIOS settings, I am unable to pass on turbo boost. I tried upgrading the BIOS of toshiba support page, but I am still unable to turn it on. The entire CPU frequency of BIOS is greyed out and I can't change it. Also on the BIOS, there is an option to enable or disable the second carrot... are not supposed to be 4 cores and 8 threads on the i7?

  Has anyone else had these issues? It's really frustrating not to find any help anywhere.

  Model: x 500 q898
  Operating system: windows 7 ultimate x 64

  Hello

  I can t say much about your model because it model s a U.S. (shown in the US page), but are you sure there's backlit keyboard?
  Have you checked the specs on Toshiba U.S. page and what is the seller say about this feature?

  With regard to mode:
  Intel Core i7 has normally 4 cores and 8 wires, Yes, but I doubt that you can control mode because it will be controlled automatically.
  Just BIOS make sure using the settings by default and that s it.

• Flex 3-1580 - no mode/tablet pc automatic mode switch

  Hey guys,.

  I bought a Flex 3 1580 a week ago. I reformatted the computer because the video drivers have been screwed up, but now when I flip the laptop around tablet mode, nothing happens. The keyboard is Cancel and all, but I no longer get the small pop up asking me if I want to spend. I tried to go in the settings of the Tablet and say things to switch automatically without asking, but it does not work.

  I wondered if maybe I missed a big piece of the software once I reformated because it worked perfectly before, but I have reinstalled all available on the lenovo Web site and nothing helped.

  I tried Googling this problem again and again but I can never find answers, especially for this particular model.

  Really would appreciate help with this. It's not a huge deal because I can swith manually, but it would certainly be nice to have to work as before.

  Thank you!

  Mod edit: System model added to the front of the subject line to improve visibility / clarity.

  Wanted to update because I think that I thought about it. The support of yoga page has drivers for 'control mode yoga' which is supposed to be responsible for controlling the automatic modes.

  Figured why not try it on the flex, and everything works as it should now. Not sure why Lenovo does not include drivers on the flex support page.

• Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

  Blue contours appeared and I can't control my iphone 5 s. I can't go to settings. I triple click on the button "home" and gives a message to go into settings and enter the password but I can't get to the settings. What does not work? Thank you

  The blue plan is switch control.

  s http://gettecla.com/blogs/News/15538916-what-is-switch-control-mode-in-apples-IO

  Triple click to get rid of him.

  "Siri to the rescue.  I said turn off the control switch. »

  Re: How to disable the switch control

  I don't get a request for an access code.  What is a school system?

  switch control

  Settings > general > accessibility > switching control

  R

• strange appearance of the digital control

  Hello...

  I met a strange appearance of a digital control, see the below two screen captures.

  Reminder: on a tabpanel, two of several digital controls have been changed programmatically if I put an indicator with a checkbox that is located on another tab of the Panel:

  -control mode is switched / battery hot

  -precision went from 6 to 4 figures to compensate for the space of digital arrows

  These changes are applied to three checks, but only the first (highest) behaves unexpectedly, while others are very well...

  (A) if both attributes are changed, the two top controls look like this:

  

  in other words, the left most of the characters of the control are somehow overlapping, giving the impression of a fat o material

  (B) if only the command mode of the higher control is changed to hot, the following result is obtained:

  

  This makes it more obvious that somehow the two zeros on the left of the control are pressed together.

  Interesting, if I operate the higher control by clicking on the arrow/top down, the result displays (1.0000E - 3) is ok.

  I was much afraid to post this mystery which could well be a stupid mine mistake, but unable to locate a problem in the code, I thought that it could possibly be linked to the issue tab panel reported here

  Comments, suggestions?

  Thanks, Wolfgang

  Hi Wolfgang,.

  I checked your project, and it looks like a bug. I created a CAR. The number is 282946.

  I guess that at the moment, you have to live with it or place the box on the same tab.

  See you soon,.

  RMathews

• Error 200077 (frequency) and 200452 (task control loop) error occurred DAQmx create calendar Source.vi

  Hello

  I'm trying to control the timing of a timed loop. So far, I have tried several approaches via the software and which worked very well except the time loop in some missed cases 1-2 Ms I want to make sure the timing is right. I tried to provide an external clock through the acquisition of data I. The system I use is NI USB-6212. It has two counters and DIO and AIO, but I keep getting errors. I tried two different approaches. One was to use directly the game 'DAQmx create calendar Source.vi' in frequency mode, and when I did, I got error 200077. Then I found a post of somone saying that sometimes it is not possible and an alternative method is to use the same vi but set task of loop control mode. This one gave me Error200452. For this one you will see in my attachment the suggestion was to use an AI then the moment of him and then use this task for Creat DAQmx synchronization Source.

  I don't know what the problem is or if I need to put something differently.

  Please let me know if you can help me with this.

  I'll try to continue to work on that, but if anyone of you a suggestion I'll be very happy to consider the issue.

  Thank you in advance,

  Best, Massimo.

  Massimo,

  In my view, the errors that you see are the result of your hardware USB-6212 is supporting the functionality of the task control loop.  I have a M Series PCI card that is capable of operating both of your screws attached without problem (although they still +/-1ms variation on occaision).  When I try to use a USB-6212 simulation, I get the same error codes that you do.  Unfortunately, it's just a case of a lack of equipment.

  Kind regards

• How to customize the cursor in UI Control Suite

  Hi all

  I installed UI Control Suite: NOR custom themed controls Suite but it is not possible to change the color of the cursor, is there a way to customize this custom control?

  Are there other customized themes that can be installed?

  Thanks in advance.

  Hello Mariano76,

  I took a peek at the library you're working. You can access the Panel to edit costrol as usual, then in order to update the properties like color, you can switch to editing of control mode. In doing so, you are correct when you say that there is no way to color to change, however, keep in mind that you are trying to update an image, so it is not supposed to be editabel. Furthermore, I suggest you right click on the component you want and select import in the file, and then replace the background with the plain color image you want. It will work.

  What about tha chance to get more themes, or you could refer to this community group link, where you can get the most times cool libraries and experienced UI developers:

  UI interest group

  Let me know if you are able to overcome the problem.

  Best regards

• change the digital command mode, it is still the initial mode

  In panel.uir, I design a mode of control digital initional as INDICATOR, so I change the control mode to be HOT in my panel.c, but digital is always unacceptible.

  SetCtrlAttribute (systemp2, SEQUINTERVAL, ATTR_CTRL_MODE, VAL_HOT);
  SetCtrlAttribute (systemp2, RBINTERVAL, ATTR_CTRL_MODE, VAL_HOT);
  GetCtrlVal (systemp2, SEQUINTERVAL, &val);)
  GetCtrlVal (systemp2, RBINTERVAL, &rbl);)

  all the two values of val and rbl are nil.

  So how to change the mode indicator to be warm mode in the program?

  In addition, the SEQUINTERVAL is not in the form PANEL_CONTROLID required by the function, so unless it is a variable where you store the correct assessed, function might be unable to translate it into the correct control IDs. Again, return code of SetCtrlAttribute reading should evidence an error in the command. It goes the same for RBINTERVAL.

• customize a pie chart in control

  Hello

  I'm trying to customize a button control. I created a graphic to replace one of the standard 'photo points' (accessible via the command Customize, double click on the chart).

  The control I'm customization is circular. The graph I created is also circular, I saved as a. PNG or. EMF, with value white square background transparent.

  When i 'Import from file' in BT import works well.

  It's the image has always a square box shape (even if the background is transparent), then what makes the active control square area, which means that the control can be activated by clicking on the share of which is transparent (i.e. encompassing one of the corners of the rectangle).

  Is it possible to create a graph that is round, or get the custom control ignore transparent areas?

  - or who are all personalized with imported graphics rectangluar?

  Thank you

  Blue

  In version beta LV 2009, I opened your VI and I can only change the value of the control when you click on the imported image. By clicking on where the arrow points or anywhere else in the rectangle but outside the black outline does nothing (so it works as you want). I don't know if it's because of a change in 2009 or something to do with my PC (XP on a virtual machine), but you should be able to find out soon enough when 2009 fate.

  Alternatively, you can try for now is opening the custom control mode change and displacement of the shadow to the top of the z-order. Because the shadow is not clickable and has a 'hole' in the Middle it could work. It does not work here, but again, it is perhaps because of the new version.

• How to rehabilitate the Parental control?

  During the installation process of Windows 7, I made a mistake: I chose the domain Mode (when should I choose the user Home Mode) there are three butterflies.

  When I try to run games with side as an adult, I have can´t access.  It appears messages like 'Parental controls blocked this game' or 'you don't have permission to run the game.  Check the Parental control in the game Explorer window.

  I have no Parental controls in Control Panel.  How to rehabilitate the Parental control?  or how to rehabilitate the Home user in Windows 7 with Parental Control Mode?

  Note: I am the rights owner and the administrator of my computer.

  TododeAzul,
  Click Start > computer (right click) > properties > change
  This will give you the ability to change from a domain to a workgroup.  After that, change is effective, it should open the Parental controls for you. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• access control using the control panel handle

  Is it possible to access the constant name when I only have the panelHandle of the IUR. The control is part of the different project and panelHandle went from the first

  project for the second project. Second project now need to set the value of the control, but doesn't have access to the panelHandle of the first project.

  TIA

  lvrat,

  There are two ways to detect certain characteristics of a control during execution. Wolfgang and I were suggesting was something like this (code written in memory: there may be some mistakes in there):

  int ctrl, mode, style;

  name char [32];

  'panelHandel' has received another application

  GetPanelAttribute (panelHandle, ATTR_PANEL_FIRST_CTRL, &ctrl);)

  all in (ctrl) {}

  through the constant name

  GetCtrlAttribute (panelhandle, ctrl, ATTR_CONSTANT_NAME, name);

  If (! strcmp (name, "NUMERIC1")) {}

  }

  Else if (! strcmp (name, "NUMERIC2") {})

  }

  ALTERNATIVE: other discriminatory features in the

  GetCtrlAttribute (panelHandle, ctrl, ATTR_CTRL_STYLE);

  switch (style) {}

  case CTRL_SQUARE_COMMAND_BUTTON:

  case CTRL_SQUARE_COMMAND_BUTTON_LS:

  GetCtrlAttribute (panelHandel, ctrl, ATTR_CTRL_MODE & mode)

  If (mode == VAL_HOT) {}

  do something on the control...

  }

  break;

  by default:

  do nothing

  break;

  }

  Check to see if there are more controls on the Panel

  GetCtrlAttribute (...,..., ATTR_NEXT_CTRL,...);

  }

  A list of control styles can be found here and in userint.h. Here the list of control modes.

  There are many attributes that makes a distinction between controls in a Panel. But doubt principal remains the same: have you tried to access a control from another application through handle Panel CVI?

• appearance of incompatible control

  Hello

  using the editor in the user interface, I came across the visual aspect a bit inconsistent following of the various controls such as digital controls and ring, see figures below.

  Scenario I: the UI editor, the two controls are defined on the INDICATOR. Run the program gives appearance i. definition of control to programmatically NORMAL mode, change the appearance of appearance II. So far, it's ok with me .

  Scenario II: In the user interface editor, the two controls are set to NORMAL. Already in the editor, they have different air of aspect II. Run the program, they always look different, see appearance_III.

  So with the various controls on a panel can produce a hodgepodge of designs what I expected, it's controls are similar in NORMAL mode if this mode has been defined in the editor or during execution of the program.

  Just for your interest, the upper control is a ring, the lowest digital.

  I:

  II:

  III:

  There are actually well defined rules that explain what you see, although I admit that they may be a little obscure. Unfortunately, all of the other rules have so far proved to be worse, and so it's probably the least bad scenario.

  I'll explain:

  1. the substance of these controls changes when you toggle the control mode between the indicator and non - indicator if and only if, you have her comply with the system colors option enabled for the Group of experts (in the user interface editor, it will also change if you have the option "use system as default values for the controls and panels colors" enabled (, in Options > preferences).

  2. by default, all new Panel that you create in the UI editor user isn't her conform to the system colors option enabled (unless you change it in the Options > Preferences dialog box). The reason for this default is if panels had this option enabled by default, any time you try to paint any control in this Panel, you would be harassed by a dialog box saying that you could not paint unless you have disabled this option. This dialog box has been considered distracting, and so we wanted to reduce its frequency. The reason why we need display this dialog box when the option is enabled is because otherwise, you'd be able to change a lot of colors, everything would look good, and then you can save the. UIR and reload it and all your colors would be lost as the Panel would return to its system colors (this option is applied at the time of loading Panel, or whenever a new control is added to the Panel)

  3. because the panels is not set to the default system colors, when you run your program, these panels have the ATTR_CONFORM_TO_SYSTEM_COLORS attribute disabled. This means that when you toggle the command mode of your numeric values programmatically, the background color will not change (see rule 1) and controls end up looking like your screenshot II instead of the screenshot more district III.

  You could eliminate this oddity by activating the Conform to option color, either on a Panel, or global system in Option > Preferences dialog box.

  Luis

• Record of control of projects and costs are not visible when the project is created manually or copy model or another project

  
  Hi all

  If I create the project using business process 'Request for project' and when we opened the project, we can see "Project delivery" and "Cost control" mode records.

  But when I create project directly in the workspace of society (Admin mode) > company sponsored Shell > project, either by directly or copy model or another project.

  We are not able to see above two folders in user mode.

  I had checked to access control, there are access avalible for all project users to the two folder in user mode.

  Help, please.

  The project administrator mode.

  Implement > BPs

  Add in your Bps and enable and configure workflow settings.

  Glad that the other worked ok now.

  I hope this helps.

• Question about the flexible reference mode vs mode

  
  Hi, help me to make it clear what mode should I use for my ar test?

  If anyone can answer my questions, it would be useful.

  1. mode of reference

  1.1 reference mode has some standard scenario to make VDI workload. would you share the contents of these scenarios?

  1.2 how the reference mode simulates listening login for users of 400VDI?

  2. flexible mode

  2.1 How can I decide which mode should be used for my test, the remote control mode, the passive mode and local mode?

  in other words, what kind of test cases are recommended for each mode?

  I know remote mode is 1:1 for the client and the desktop computer, passive mode is 1: n and local mode is 0: n.

  2.2 how flexible mode to simulate the time to peak of connection for users of 400VDI?

  Thank you very much.

  Ayako

  1 Yes "remote" mode and specify 400 as the number of workstations. You need 400 clients to connect.

  2. you can see the workload mix on the ViewPlanner UI page. But for the event log, you can only select the 'word'.

  3. There will be a PDF report at the end with all the stats.