Flex 3-1580 - no mode/tablet pc automatic mode switch

Similar Questions

• The A3-A20-K1AY support automatic power switch with flip covers?

  I just bought this Iconia and a folding cover to go with it. I can't find anywhere in the settings to activate automatic power switch. Now, I wonder if this tablet has even this feature.

  Yes, he does not sleep automatically when you close the lid. Better to use the button for this.

• Gigaframe L80 forget automatic power switch time and brightness settings

  Hello world

  I'm on my second gigaframe l80 and it has just developed the same problem that the first seems default back to factory settings.
  Then he forgets his automatic power switch time and very annoying brightness adjustment!

  Has anyone else had this problem?

  a soon fly

  Hello oozie.

  I also own a Gigaframe L80 and it works very well.
  Have you plugged the permanentely power framework (using the AC adapter)?
  How long does it take, the framework sets the default settings?
  Have you tried "reset" of the image using the small button on the bottom of the frame?

  welcome them

• Silent mode switch Lenovo Vibe P1

  Hello

  can I change the powersaving switch in a silent mode switch?

  Hello

  No, the power save button is not programmable, it is only for the power saving mode.

  You can use the power button: long press and choose the silent mode.

• I don't have the option of automatic graphics switching

  I just bought a new retina MBP mid-2015 with a 256 Flash storage.

  I can't seem to find the automatic graphics switching toggle in the "energy saving" in system preferences.

  Can someone help with this problem?

  Thank you.

  It depends on the model of MacBook Pro you have.

  256 GB of SSD storage?

  

  https://support.Apple.com/kb/SP719?locale=en_US

  

  /macbook-pro-retina-display-how-to-manually-switch-graphics.html http://www.EveryMac.com/systems/Apple/Macbook_pro/MacBook-Pro-retina-display-FAQ

• Why the office buttons, Tablet and phone are switched in the last update?

  Why the office buttons, Tablet and phone are switched in the last update? Are they placed in a different location or have they been deleted all together? I need these options.

  Greg

  I thought about it. They have moved to the Page, and then add another layout.

  Greg

• X 220 T: screen used to turn Tablet & FN + F3 after switching to the Mode will not work

  Dear community,

  as I have already mentioned in the thread title, my screen will not turn after the passage in Tablet Mode. Also FN + F3 does not either. System update shows no other edits, but he seems to be in any case, tapped since im sure that it has not installed the tablet button driver.

  I have a sweet Version of installed Windows 7, and before I start installing drivers hurt over and over again, im invite you you guys for help. Maybe you can tell me which driver I'm missing.

  All the best,

  Nik

  Installed all the drivers of the matrix-driver manually, looks like it worked. System update however was the shit...

• Flex 3-1580, a USB 3.0 port no longer works

  My laptop has been performing fabulously since I bought it a little less than a month ago. Two weeks ago one of the ports usb 3.0 on the right side (not the "always you") has stopped working. If I plug my phone in, it starts to load, but does not appear in windows. If I plug in my external hard drive, it lights up, but also is not recognized. If I plug in a flash drive with a light, it does not and is not recognized. I've updated the BIOS (failed), attempted to update usb drivers that were installed (did not work) and then I tried to uninstall the drivers in Device Manager, restarting and allowing windows to reinstall them automatically (failed). The other 2 usb ports work fine, a 2.0 and the other is 3.0. Any thoughts on what to try next? I then only it back because the place I bought it always bring it.

  I just returned it for a new new works very well.

• When you open a PDF file, it automatically prints & switches to full screen mode

  First of all, I apologize if it's in the category wrong forum - I couldn't find a category that corresponds to this number, something like 'implementation of the software.

  I use Adobe Acrobat 9 Pro on Windows 10.  The software works very well.

  However, whenever I open a PDF file, the software automatically opens a dialogue box invites me to print the PDF file.  Usually I do not want to print the PDF and have quit the dialog box.  Second, once I left out of the print dialog box, the software invites me to indicate that if I want to put the document in view full screen, which usually I don't want to do and to get out of it, I have to leave another dialogue box.

  I don't want to get out of these dialogs whenever I open a PDF file.  I just want to see the PDF file.  That's all.

  How can I configure the software so that it does not prompt me for that?

  First of all, even if works well, Acrobat 9 is not officially compatible with Windows 10, so some problems are to be expected.

  However, the behavior that you describe is usually caused by a script or parameters incorporated into the files you open, not in the application itself.

• Flex sign in with a user ACL with APs switch locally

  Hi all
  Flex connects allow a user ACL to download the session with local authentication, dial-up, Central? We use ISE for the central policy engine and have the DACL of a wiring installation but am about to embark on WLAN. The controller is a 5508 and the. APs are 3700.

  Second question-if the feeder connect APs do not any form by the user ACL, the other option is to have units in normal mode where they are both centrally switched and authenticated at the center that I understand to support one user ACL. Our WAN links are between 10 Mbps - 30mbps and latency most would be about 40ms. Did this cause issues with network links EXPANDED size and latency?
  Thank you

  Sent by Cisco Support technique iPad App

  Well you run v7.6 so FlexConnect user RADIUS ACLs are supported by this doc since v7.5.

  http://www.Cisco.com/c/en/us/support/docs/wireless/5500-Series-Wireless-...

  The extent of latency WAN 200ms is good, but it depends on your use of the WAN now and AP how you plan on installing and the increase in wireless on your WAN traffic. There is a minimum requirement, but you're on at the end to make sure that you have sufficient bandwidth, otherwise you will need to QoS traffic capwap for ensure that APs do not bounce connected to stand alone.

  Sent by Cisco Support technique iPhone App

• Change the DNS server automatically when switching to WiFi network?

  I am usually connected to one of the two wifi networks, one I have control on and I'm not. When I am connected to that I have no control over, I usually spend my DNS settings of the network server (which often breaks down) to a third party one, but I end up having to do this every time. Is there a way so that it would automatically change my DNS server whenever I connect to this network? I am running Windows Developer Preview

  Hello

  ·         What operating system do you use?

  ·         Your computer is on a domain network?

  Try these steps and see if it helps.

  Step 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

   

  Step 2: Try to reset TCP/IP and check.

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

   

   

  Step 3: Uninstall and reinstall network/modem driver from Device Manager.

  (a) click Start, type Manager of devices in the search box and press ENTER.

  (b) Device Manager window opens, expand the network card.

  (c) right click and uninstall, reboot the system.

   

   

  Step 4:

  Follow the steps in troubleshooting from the link and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

   

  Step 5:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Reference: http://windows.microsoft.com/en-US/windows7/DNS-Domain-Name-System-frequently-asked-questions

• Frequency mode switch damage the mornitor?

  I'm usually using DDM auto mode when I play the game I'm always alt - tab for other things so switch mode pre-selection so long is this fine to use it can damage mornitor?

  That's how the DDM is designed to work, so I doubt that it will damage the screen. I never heard of that happening.

• The mode switching landscape to portrait, what do I do next?

  Hello everyone. I have installed the accelerometer in my application, configure the headphones, created a State of 'portrait '. What is the call to change the status of my _accelerometer.onUpdate ()?

  If you try only to have your app support landscape and portrait orientations, I wouldn't bother using the accelerometer.

  Listen for the StageOrientationEvent.ORIENTATION_CHANGE event or that I am in my application current just monitor Event.RESIZE and don't worry 'landscape' versus 'portrait', but rather just meet the width and height of the actual values.

  I know the tricks of the Tablet OS developer's guide shows an example of using the accelerometer, but I must say it mystifies me why they bother proposing this solution.

• ISE works with Local Mode switch

  Hi guys,.

  My AP is configured to run as a mode with my WLC Flexconnect, which means that my wireless data will be locally switched without going through my WLC, is this ok for my ISE to controll my Wi - Fi?

  Kind regards

  Yes; FlexConnect supports authentication central both locally and centrally switched traffic patterns.

  Lots of info on FlexConnect here;

  http://www.Cisco.com/en/us/docs/wireless/controller/7.4/configuration/guides/Flexconnect/config_flexconnect_chapter_01.html

• Can not access my google drive using my Tablet alpha Acer 12 switch

  Hello

  I just got this new ACER switch Alpha 12. I can access to many websites, but when I try to access the drive.google.com the connection back, but at the same time, I can walk on my mini HP laptop and access the drive of google without problem? No idea why this is happening?

  Thanks in advance.

  What should we not https://drive.google.com? If you have been typing google.drive.com, which shouldn't work.