Best method for photo ID for the portfolio & how to retrieve images of portfolio as a group?

Similar Questions

• What is the best product for the use of... image gallery to crop, color correct, then re-touching etc.

  What is the best product for the use of... image gallery to crop, color correct, then re-touching etc.

  Hi gardenzio2,

  You can try using Adobe Photoshop

• best method for the implementation of the equallogic line

  Hello

  We recently purchased an equallogic ps4000 who will be used mainly for purposes of DR in a branch.

  The idea is to have a copy of all critical servers on this group of Branch Office.

  My plan was to create a replica of the 'seed' of all servers when the two paintings are at Headquarters (i.e. on the same network). When I then take the painting at the branch there is much less data to be replicated across the WAN. for example

  • Give the 'branch' equallogic iSCSI headquarters subnet address
  • The replication setup (for example, the replica of the seed)
  • Change the IP address of the 'branch' equallogic/group
  • Unplug and take the painting at the branch
  • Resume replication over the Wan

  I was wondering;

  (a) if it is a good plan

  (b) is the best way to do it?

  Thanks for any advice on this.

  Huw

  Yes, it's a way you can do the initial transfer to the DR group.

  You can also read about the Manual Transfer Utility (MTU), the download is on the same page as the Firmware Version you have installed on your berries (on FW download page, find the section titled "EqualLogic Compatibiltiy tools).

  In a nut shell, after installation of the MTU, then using the same system, the connection to the Admin group and in the Tools Menu interface (bottom left), select "Manual transfer utility" as follows:

  

  -joe

• Best approach for the transmission of data and images

  We you write an app that will allow the user to take a picture of a document and enter a few bits of information about the document and then send it to our server. It is a mobile extension to a larger system of document management to back office we develop in-house so the intention of this BB app is not not to distribute to the masses.

  What is the most practical approach to transmit data and images captured on our server?

  -FTP - fooled with it some and a pain

  -WebService - did not attempt

  -Send an email with the picture attached - seems to work very well

  Is there another approach, should I consider?

  If you do not already things that communicates to the Server backend, e-mail is probably the easiest way.  Crosses all the issues of the segmentation of the image that you would have to do with the Web Service or FTP.

• DPS: Judge to use the parameter Raster or vector in the States of the objects when the majority of the page is a photo. What is the best setting for the overall performance?

  I am trying to decide whether to use the parameter Raster or vector in the States of the object when the majority of the screen is a picture (with a modest but important legend for children to read). The legend certainly makes it look more net as vector. But does the photo! The raster setting seems to make the lower-res images in comparison. In my first edition of my application, I thought that raster would be the best setting when the photo was the subject dominating the page. But now, after seeing how strong he looks like vector, (but with almost a refresh of the unacceptable time. Perhaps better on the latest iPad. Most of my readers/students in class will use iPad 2 s, which has a slower processor). I wonder if I should go through the trouble of changing States of photo objects that have the type as well to the vector. It doesn't seem to be as sensitive to a re - draw on the iPad 2 (non-retine)

  Is Filesize hit if I make about 1200 on these objects range from Raster to vector? (It is a huge, highly interactive history book, so I'm curious if acutally go to vector on these photos would reduce the size of the file) What is the best setting for the overall performance?

  I see the freeks screen outside for a bit if you try to pinch and zoom in a vector object (photo) vs raster. Which is disappointing. Does slow down load time/refreshment in frame, which is a little less. I also found that the drop shadows really bad that redraws effect in vector, almost vibrating in a slide show, for example. Thus, in cases where I need shadows, I'm sticking with Raster.

  All tips go ahead?

  Brian

  Does that help? http://boblevine.us/Digital-Publishing-Suite-101-keep-text-sharp-in-raster-slideshows/

• Best Meanless for the 7 "digital picture frame

  Hello

  I had one

  * Digital Photo Frame II, 7 "O, 720 x 480, touch sensor, MP3 Player-Funktion PA3637K-1ETC *.

  Manual talk about the best resolution for the photos to.

  you will find on the Web: 800 x 480 pixel WVGA screen (720 x 480 pixels ZAL Bereich)

  726 x 480 pixel samples.

  Now my problem:

  When you put pictures on it - * it cropps a bit on the right and left side and more on the top and the bottom.*

  I tried many sizes. Even in 720 x 480 it cropps.

  So my question is: what is the best resolution for the photos?

  Best regards

  Markus

  I think that the Digital Photo Frame supports the 3:2 format.

  It's a format that is supported for analog cameras.

  I think that your photos are created in 3:4.

  So if you want to get a maximum photo resolution then you create pictures in the 3:2 format.

  For most all CAMS dig support such format and you can choose somewhere in the menu of the digital camera.

• Best film for the reversals of model format?

  I am re - work my portfolio site and looking for a better way to make my 3D Max models rotations. I am looking at two options, but both have their advantages and disadvantages:

  QUICKTIME:

  It's the way I'm currently doing reversals of model, using Quicktime:

  http://www.mickposch.com/high_poly/high_poly_vdad.htm

  
  The good thing about QT is that the anims are looping - you can press the play button and the model keeps running until you stop it. There is also a very good interactivity - you can view the model from different angles rubbing them. So, what's the problem? If you zoom your browser to blow up the image (using Ctrl + Plus), all on the page scales except the film - which leaves an ugly white space around it. I know not how to change the code so that the film evolves upwards with the page, but it's horrible - pixelated than jpg and other elements of the page files.

  JW PLAYER:

  
  The other option I'm considering for the turnaround is the JW Player. I already use it in another section of my site for clips of animation:

  http://www.mickposch.com/animation/animation_sof.htm

  JW works very well for these clips - they scale well when you zoom upward into the browser, and you also have the option to go full screen. But if I use this method for the reversals of model, there are a few problems: there is no way to make them in a loop, the interaction when you rub is not as smooth as it is with QT, and they always start with the arrow "Play" is huge covering part of the image. The colors also slightly shifted their correct values. This are very big problems in the section of movie clip, but would be a problem for the reversals of model.

  So, any ideas on a better way to make the turnovers? I even wouldn't mind sticking with Quicktime, if I could find a way to eliminate that ugly white space (or make the same color as the background).

  Another alternative is SketchFab: http://sketchfab.com/

  Or: http://verold.com/

  I would avoid QT as the plague today for the web: Quicktime is not installed on a large number of machines.

  Or if not something like this: https://rotaryview.com/

• Best practices for the use of reserved words

  Hello
  What is the best practice for the use of the reserved words as column names.
  For example if I insisted on the use of the word to a column name comment as follows:
  
  CREATE TABLE...
  VARCHAR2 (4000) "COMMENT."
  ...
  
  What is the impact on the track I could expect and what problems should I be informed when doing something like that?
  
  Thank you
  Ben

  The best practice is NOT to use reserved words anywhere.
  Developers are human beings human. Humans have their moments to forget things.
  They will not forget to use the "", or you can force it to use the "' everywhere.
  The two methods are Oracle certified ways to end up in hell.

  ----------
  Sybrand Bakker
  Senior Oracle DBA

• What is the best monitor for the MacBook Pro?

  I want to get a 27 "monitor for my macbook Pro for my degree. Which is the best alternative for the thunderbolt display, as it is incredibly expensive. Thank you guys

  I prefer Samsung, and I deployed samsung monitors to dozens of designers who I support (27 "), but almost all of them use the same components of the same factories.

• Best settings for the analysis of revenues

  I just bought a HP Officejet 6600 A-I-O. I was looking for a device scan my boxes of documents, so I can unclutter my home office. I would also like to analyze the revenue. I considered the famous 'neat Scanner", but I hesitated to the price tag of $400.

  My question: what are the best settings for the HP scanning application when I'm scanning received? What is the difference between PDF and PDF searchable? IsTIFF a better choice than PDF? Use "Generalist" or something else? Recipes do not need large files high resolution, of course.

  Can someone point me to a guide that explains the different parameters available with the HP Scan application, please. Thank you!

  Hi Caesar3,

  In a regular PDF document, the text looks more like a picture of the text.  We can see it, but the file does not contain the words.

  In an indexed PDF, text is stored as text, so it can be searched.

  http://acrobatusers.com/tutorials/how-to-create-a-searchable-PDF-file

  When you scan receipts, 200 or 300 dpi should be fine.  If you plan to print the stored version receive 300 dpi would work well.

  I recommend PDF more TIFF.  TIFF files can store pages or multiple images in a single file, but access to additional pages is a bit awkward.  Generally, the file size is much smaller with PDF or TIFF.

  The site http://www.scantips.com/ is a good resource.  This is a Web site not HP, but it does not scan HP.

• Define a map or ORDER method for the object type

  Hi gurus

  I created an object and then its type and then I use this object and type based on line, see below:

  Create the object

  CREATE OR REPLACE

  TYPE test_object

  IS

  OBJECT

  (

  next_appearance_dt DATE, - next_appearance_dt

  youth_adult VARCHAR2 (5) - youth_adult

  ) ;

  
  /

  Create the object Type

  CREATE or REPLACE TYPE t_docket_object IS TABLE OF THE test_object;

  /

  Create function Pipeline

  FUNCTION to CREATE or REPLACE f_report (p_dt date, p_c_cd VARCHAR2)
  return t_test_object pipeline
  IS
  BEGIN
  FOR J IN)
  Select distinct test_object)
  next_appearance_dt,--862,
  'YOUTH '.
  ) AS test_object
  Jen.next_appearance base
  WHERE 1 = 1
  AND (base.next_appearance_dt = p_dt)
  AND (base.circuit_point_cd = p_c_cd)
  - and cse.information_id = 322
  -ORDER 15 - alias_name
  )

  loop
  PIPE ROW (J.test_object);
  END loop;
  END;

  /

  Run function

  SELECT * FROM TABLE (F_REPORT (TO_DATE('25-sep-2015','dd-mon-yyyy'),'1 '))

  Error

  ORA-22950: cannot ORDER objects without map or ORDER method

  ORA-06512: at "F_REPORT", line 5

  22950 00000 - "cannot ORDER objects without map or ORDER method.

  * Cause: an object type must have a defined for map or ORDER method

  all comparisons other than equality and inequality comparisons.

  * Action: Define a map or ORDER method for the object type

  I know the reason of this error and the reason is that I use the clause separate in my pipeline service, but do not know how to get rid of this error...

  Confuse you the type of table with the object type. He forge

  Select test_object (next_appearance_dt) test_object

  Not:

  Select t_test_object (next_appearance_dt) test_object

  Then:

  SQL > CREATE OR REPLACE
  FUNCTION f_report (DATE p_dt 2,
  3 P_C_CD VARCHAR2
  4                   )
  5 t_test_object of RETURN
  6 IN PIPELINE
  7 EAST
  BEGIN 8
  9 FOR (IN) v_rec
  10 WITH () DID
  11. SELECT TO_DATE('01-jan-2015','dd-mon-yyyy') NEXT_APPEARANCE_DT
  the double 12
  13                                  )
  14 select test_object (next_appearance_dt) test_object
  15                          from  t
  16                      ) LOOP
  PIPE 17 ROW (v_rec.test_object);
  18 END OF LOOP;
  END 19;
  20.

  The function is created.

  SY.

• Lightroom would be the best choice for the modification or improvement of portrait photography

  Lightroom would be the best choice for the change and improvement of portrait photography

  An official Adobe Evangelist Terry White did a demonstration of complete portrait retouching for Lightroom 5.  Look at that and you'll know if that's what you have in mind.

  https://www.YouTube.com/watch?v=iYxu17-R_wQ

• Binds the exportXFAData(); method for the saveAs event

  I have an XFA form that was built with LiveCycle and I try to write javascript to Adobe who will export the form data to an XML file whenever a user manually saves the file in Acrobat. Preferably, this feature is easily sharable, because I have clients who need to have this ability.

  I'm a novice, but it seems that the interactive objects are grey and so I can not add a custom button. That's why I hope to link the exportXFAData(); method for the saveAs event. When a user does CTRL + S or file > save (sub)... the XML should be exported to the desktop.

  It seems that I have to use the exportXFAData() or exportAsXFDF() method.  I found something that says: " it is a very simple process to do this, use the method saveAs Doc object... " and copy the following code:

  
  

  this.saveAs ("/ c/temp/test.xml", "com.adobe.acrobat.xml - 1-00");

  I do not know where to write this code, or if it must be adapted (not to mention that the path) to accomplish what I asked above.

  Thank you very much,

  
  

  
  

  Carl

  
  

  It does not export form data, as far as I know, but another schema. There is a different method for acroforms export but I don't know for XFA forms. You should check the reference XFA JavaScript, not google.

  The example you found is not in any way binding to the SaveAs event. Rather, it uses a special feature of the document.saveAs method that allows you to save/export other formats instead of PDF, such as file options > save as. The code generally added to a button, but do not work (see below). I don't know if you can run this in an event WillSave or similar, that; s a separate exercise.

  Don't forget to read the XFA JavaScript document for this method since it will have security restrictions designed to stop incorporating any kind of back up/export to a file - because think havoc if a PDF file that you have downloaded begins to silently save/export the files to your computer. Do not try to use acroform rather documentation! And I see that what you quoted DC Acrobat SDK Documentation applies to the acroforms.

  For more specific help, I suggest the LiveCycle Designer forum. We are dealing here Acroforms.

• vSpere 5 Networking of best practices for the use of 4 to 1 GB NIC?

  Hello

  I'm looking for a networking of best practices for the use of 4-1 GB NIC with vSphere 5. I know there are a lot of good practice using 10 GB, but our current config does support only 1 GB. I need to include the management, vMotion, Virtual Machine (VM) and iSCSi. If there are others you would recommend, please let me know.

  I found a diagram that resembles what I need, but it's for 10 GB. I think it works...

  (I had this pattern HERE - rights go to Paul Kelly)

  My next question is how much of a traffic load is each object take through the network, percentage wise?

  For example, 'Management' is very small and the only time where it is in use is during the installation of the agent. Then it uses 70%.

  I need the percentage of bandwidth, if possible.

  If anyone out there can help me, that would be so awesome.

  Thank you!

  -Erich

  Without knowing your environment, it would be impossible to give you an idea of the uses of bandwidth.

  That said if you had about 10-15 virtual machines per host with this configuration, you should be fine.

  Sent from my iPhone

• ORA-19030: invalid method for the schema not based XML Documents

  Hi everyone can u help me please when I am trying to execute query below his throw errror

  DECLARE

  doc xmltype.

  BEGIN

  SELECT

  XMLAGG (XMLElement ("employee",

  XMLAttributes)

                    ' http://www.Oracle.com/emp_simple.xsd ' AS 'xmlns',

                    ' http://www.w3.org/2001/XMLSchema-instance ' AS ' xmlns: xsi ",

                    ' http://www.Oracle.com/emp_simple.xsd

  http://www.oracle.com/emp_simple.xsd'

  AS "xsi: schemaLocation").

  XMLForest (e.employee_id LIKE "EmployeeId",

  Select AS "name."

  e.job_id AS "Job."

  e.manager_id "MANAGER."

  e.hire_date AS "Hire Date"

  e.Salary AS "wages."

  e.commission_pct AS 'The Commission',

  XMLForest)

  d.department_id AS "DeptNo."

  d.department_name AS "DeptName",.

  d.location_id AS 'Place') AS 'Dept')))

  in the doc

  E employees, departments d

  WHERE e.department_id = d.department_id;

  doc.schemaValidate ();

  END;

  /

  The error I get is following

  ORA-19030: invalid method for the schema not based XML Documents

  Yes, Odie meant something like that.

  See how the employee node can now occur more than once in the employees node.

• best practices for the storage of the vm and vhd

  no doubt this question has been answered not once... Sorry

  I would like to know the best practice for the storage of the vm and its virtual hard disk to a SAN.

  Any show advantage does make sense to keep them on separate LUNS?

  Thank you.

  It will really depend on the application of the virtual machine - but for most of the applications no problem by storing everything on the same data store