Best practices for designing a view in PlayBook

Similar Questions

• Best practices for adding form fillable form designer EULA & forcing acceptance by the user

  What are created the best practices for adding a license agreement end user to a form with LiveCycle Designer. and to force the user to signify the acceptance of the EULA before access inside the form?

  Time, I have the kludged with a series of four message boxes (which is necessary because my LICENSE agreement, like most) is too long to fit in a single messageBox).  3 first message boxes have OK/Cancel buttons.  If the user clicks OK, she gets the following message EULA box; If she clicks cancel the form closes.  The last post (fourth) area a Yes/No buttons with the corresponding behavior.  It seems that the work (I think?), but it's ugly.  Is there an "easy way" to do it with a single drop-down dialog box "I agree" and "I refuse" custom buttons?

  I've seen references to Tools like this but they are marked as obsolete or abandoned due to security or other unspecified concerns.

  Best, Blake

  Another way might be, keep the form pages hidden at the beginning and only display a single page that has text box that contains the EULA with accept and refuse to scroll buttons. IF someone refuses, you can keep the rest of the hidden form or display message boxes to force acceptance of the EULA.

  If anyone agrees, you can simply hide the EULA page, and display form pages.

  I hope that used here too scripting required to reach it either.

• Best practices for color use in Adobe CC?

  Hi all

  Is there an article that describes the best practices for use of color in Adobe CC?

  I produce a mixture of viewing online (PDF, for the most part) and real world print projects - often with the obligation for both. I recently updated my PANTONE + bridge books for the first time in ages and I am suddenly confused by the use of Lab colors in the Adobe Suite (Illustrator and InDesign).

  Everything I found online, looks like Lab color mode preferred to use because it is device independent. And perceptual (on screen), it looks much closer to the color, it is trying to represent. But when I mark a Spot color Illustrator rectangle using laboratory coordinates, to the sides of a rectangle using PANTONE + bridge CP and then export it to PDF, the version of CP to mix CMYK color corresponds exactly to my Pantone book - while the version of laboratory (after converted to CMYK using the ink Manager) is far away.

  I have this fantasy to manage only a single Illustrator or InDesign file for both worlds (PDF) printed and online. Is not possible in practice?

  Any info describing the basic definitions of the color modes - or even a book tracing more than use them in the real world - would be much appreciated!

  Thank you

  Bob

  Here are a few best practices you can already do.

  1 make sure that your color settings are synchronized on all applications.

  2. use a CMYK profile appropriate for your print output. Lab spot colors convert to CMYK values based on the CMYK icc profile.

  3. include icc profiles when save or export pdf files

  In theory, your imagination is possible today. It requires color management and the use of icc profiles. You can place RGB images in InDesign and use Pantone colors in your objects. The problem lies in the printers. If a printer uses a RIP with built in Pantone library, the colors will match when printing. Unfortunately, this kind of CUT is more expensive and not enough printers use them. Most of them is always manually approximate CMYK values composition given Pantone colors.

• HTML and CSS best practices for Eloqua?

  Hello Topliners community,

  My name is Ben and I am a Web Designer. Currently looking for guidance on best practices in HTML and CSS when you work with Eloqua. I am interested in best practices for email and landing pages.

  Thank you

  Ben

  For landing pages, you can use a bit of HTML, CSS, and Javascript like on any other page. For example, we use the Bootstrap on a couple of our Eloqua landing pages.

  Support for HTML and CSS is much more limited. It is one of the best resources I've seen for CSS support:

  http://www.campaignmonitor.com/CSS/

• What is the best way or best practices for access to the session defined in servelt pipeline component?

  Hi Experts,

  What is the best way or best practices for access to the session defined in servelt pipeline component?

  Please, share your ideas.

  Thank you

  ankV

  As performance is concerned, a lot would depend on as to how your design & logic is implemented and you presented search operations to support the specific performance problems. In fact the operation itself can be not expensive than in-house it is somewhat like a search for key/value of the objects in session/application context name. But having said that, Yes, a potential performance problem could be because it's a synchronized operation. So to avoid searches to be performed during each request, caching the results of a search of a component. And in the majority of cases to solve a 'A' component within your component, you must configure a property reference 'A' in the file properties for your component.

• Best practices for tags

  Hello
  
  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached... What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.
  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.
  OR
  You have a better option?
  
  Kind regards
  Fateh

  Fateh says:
  Hello

  In the bundled applications Tags are used in most applications. For example. in App Customer Tracker, we can add tags to a customer where these tags are stored in a varchr2 column in the Customers Table.
  In my case, I've pre-defined tags real estate (Real Estate) in a table of research called TAGS. For example, Full floor, furnished, equipped, duplexes, attached...

  These seem to be two different use cases. In the bundled applications tags allow end users to join free-form metadata to the data for their own needs (they are sometimes called "folk taxonomies"). Users can use tags for different purposes or different tags for the same purpose. For example, I could add 'Wednesday', 'Thursday' or 'Friday' tags customers because these are the days that they receive their deliveries. For the same purpose, you could mark the same customers '1', '8' and '15' by the numbers of road trucks making deliveries. You can use 'Monday' to indicate that the client is closed on Mondays...

  In your application you assign to the known properties of predefined attributes. It is a model of standard attribute 1:M. their view using the metaphor of the label is not equivalent to the user of free-form tags.

  What is the best practice for tag properties:
  1 - to store these tags in a varchar column in the table of PROPERTIES using the Shuttle box.

  If you do this, how can you:

• Search for furnished duplex properties effectively?
  
• Change in the world "mounted" to "integrated"?
  
• Ratio of the number of properties, broken down by full floor, double-sided, equipped...

  OR
  2. to store in a third table Eg, PROPERTIES_TAGS (ID PK, FK property-ID, TAG_ID FK), then use the LISTAGG function to show tags in one line in the report properties.

  As Why use Look up Table, shows the correct way to proceed. It allows the data to be indexed for efficient extraction, and issues such as those above should be dealt with simply by using joins and grouping.

  You might want to examine the possibility of eliminating the PK ID and use an index table organized for this.

  OR
  You have a better option?

  I'd also look carefully your data model. Make sure that you're not flirting with the anti-pattern VAE. Some/all of these values are not simply the attributes on the property?

• Best practices for managing strategies of path

  Hello

  I get conflicting advice on best practices for managed paths.

  We are on version 4.0 of ESXi connection to a HP EVA8000. Best practices guide HP recommends setting the strategy of railways handle on Round Robin.

  This seems to give two active paths to the optimized controller. See: http://h20195.www2.hp.com/v2/GetPDF.aspx/4AA1-2185ENW.pdf

  We used certain consultants and they say that the best practices of Vmware for this solution is to use the MRU policy which translates a single path to the optimized controller.

  So, any idea what good practice is best practice? Does make a difference?

  TIA

  Rob.

  Always go with the recommendation of the storage provider.  VMware recommendation is based on the characteristics of the generic array (controller, capable ALUA failover methods, etc.).  The storage provider's recommendation is based on their performance and compatibility testing.  You may want to review their recommendations carefully, however, to ensure that each point is what you want.

  With the 8000, I ran with Round-Robin.  This is the option of creating more robust paths available to you from a failover and performance point of view and can provide performance more even through the ports on the storage controller.

  While I did of the specific tests/validation, the last time that I looked at the docs, the configuration of HP recommends that you configure each IO to the ports in the switch configuration.  This adds the charge to the ESX host, the switch to other ports, but HP claims that their tests showed that it is the optimal configuration.  It was the only parameter I wondered in their recommendation.

  If you haven't done so already, be sure to download the HP doc on configuring ESX and EVA bays.  There are several parameters that you must configure the policy path, as well as a few scripts to help make the changes.

  Virtualization of happy!

  JP

  Please consider awarding points to useful or appropriate responses.

• best practices for placing the master image

  Im doing some performances / analysis of load tests for the view and im curious about some best practices for the implementation of the image master VM. the question is asked specifically regarding disk i/o and throughput.

  My understanding is that each linked clone still reads master image. So if that is correct, then it seems that you would like the main image to reside in a data store that is located on the same table as the rest of the warehouses of data than the House related clones (and not some lower performing table). The reason why I ask this question, it is that my performance tests is based on some future SSD products. Obviously, the amount of available space on the SSD is limited, but provides immense quantities of e/s (100 k + and higher). But I want to assure you that if, by putting the master image on a data store that is not on the SSD, I am therefore invalidate the IO performance I want high-end SSD.

  This leads to another question, if all the linked clones read from the master image, which is general practices for the number of clones related to deploy by main image before you start to have problems of IO contention against this single master image?

  Thank you!

  -

  ---

  Omar Torres, VCP

  This isn't really neccissary. Linked clones are not directly related to the image of the mother. When a desktop pool is created and used one or more data stores Parent is copied in each data store, called a replica. From there, each linked clone is attached to the replica of the parent in its local data store. It is a replica of unmanged and offers the best performance because there is a copy in every store of data including linked gradient.

  WP

• What is the best practice for the enumeration for the ADF?

  Dear all,
  
  What is the best practice for the enumeration for the ADF?
  
  I need to add the enumeration to my request. ex: sex, marital status.
  
  How to deliver? Declarative custom components or is there another way?
  
  Thank you.
  Angelique

  Check out this topic - '5.3 fill view object Rows with static data' in Guide of Dev
  http://download.Oracle.com/docs/CD/E17904_01/Web.1111/b31974/bcquerying.htm#CEGCGFCA

• AF best practices for video

  I'm using an EOS 7 d for 1080 p HD video shooting. New to SLR camera and digital video. I have watched several tutorials but do not yet have a good understanding of what the best practices for the development.

  If I put the camera in AI Servo it will auto focus if the subject is moving away or toward me with depress me back AF-ON or the shutter button? Or should I press one of these buttons to make the camera continues to focus?

  You know tutorials or video lessons that cross using update with the video?

  Thanks in advance!

  I don't know any tutorials, but more serious videographers say it is best to use only the manual focus.

  Trial and error is a good teacher, when it comes to video DSLR. You'll quickly learn that video Auto Focus is really bad with the 7 d and most of the people do not use it all together.

  The method that works for me is to use AF before the filming of the video and then adjust manually if you want to you to shoot the video. With the help of f/8 or f/11 to keep everything in short without having to keep the setting.

  More recent Canon DSLR's like the T4i, T5i, 70 d and SL1 have a "hybrid AF" that does a much better job of AF during video, but it is not yet as good as a camcorder

• I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates.

  Thank you for taking the time to read this. I would like to know the "best practices" for unplugging my computer permanently to the internet and other updates. I thought I would do a clean install of Windows XP, install my Microsoft Works again and nothing else. I would like to effectively transforming my computer into a word processor. He continues more and more slow. I get blue screen errors, once again. I received excellent Microsoft Support when it happened before, but since my computer is around 13 years, I think it is not worth the headache to try to remedy. I ran the Windows 7 Upgrade Advisor, and my computer would not be able to upgrade. Please, can someone tell me how to make it only a word processor without updates or internet connection? (I already have a new computer with Microsoft Windows 7 Home Premium, it's the computer that I use. The old computer is just sitting there and once a week or so I updates.) I appreciate your time, thank you!

  original title: old computer unstable

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/install-Windows-XP

  http://www.WindowsXPHome.WindowsReinstall.com/sp2installxpcdoldhdd/indexfullpage.htm

  http://aumha.NET/viewtopic.php?f=62&t=44636

  Clean install XP sites
  You can choose which site to reinstall XP.

  Once it is installed, then you do not have to connect what anyone, however, some updates may be required to perform the work, test this by installing work and see if you get an error msg. Except that you should be fine.

• HP stream 11-d008tu: best practices for migrating to Windows 10?

  Hey there, I have a HP flow 11-d0008tu and received the notification I can upgrade to Windows 10. I want to do a clean install with a downloaded ISO but knowledge first of all, it is better to upgrade so that you get the activation done.

  Can someone give me some ideas on best practices for the upgrade? The stream has only 30GB HD so I have no recovery disk, I'll just do a recovery later on USB or SD card. When I do the upgrade can deselect recovery option or delete?

  Also, any other suggestions appreciated, especially which helps make effective for small HD

  See you soon

  Hi, I posted an installation procedure for Windows 10 fresh for the Tablet HP Stream here.  Also, I have a laptop 11 flow but do not have that yet. I think it must be the same because they both the same drive of mem 32 GB Hynix. A change would you probably want to use the 64-bit instead of 32-bit Windows 10 ISO file, the Tablet has only 1 GB of RAM.

• Just improved m tips on best practices for sharing files on a Server 2008 std.

  The field contains about 15 machines with two domain controllers, one's data is the app files / print etc...  I just upgraded from 2003 to 2008 and want to get advice on best practices for the establishment of a group of file sharing. Basically I want each user to have their their own records, but also a staff; folder. Since I am usually accustomed to using windows Explorer, I would like to know if these actions can be done in the best conditions. Also I noticed on 2008 there is a feature of contacts. How can it be used? I would like to message or send an email to users their file locations. Also, I want to implement an admin at a lower level to handle the actions without making them far in on the server, not sure.

  I read a certain bbut I don't like test direct more because it can cause problems. So basically a way short and neat to manage shares using the MMC, as well as the way that I approach their mail from the server of their actions. Maybe what kind of access cintrol or permissions are suitable also for documents. Also how can I have them use office templates without changing the format of the model.

  THX

  g

  Hello 996vtwin,

  Thank you for visiting the Microsoft Answers site. The question you have posted is related to Windows Server and would be better suited to the Windows Server TechNet community. Please visit the link below to find a community that will support what ask you:

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

  Hope this helps J

  Adam
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Best practices for vsphere 5.1

  where can I find the doc more up-to-date about berries EQL configuration / best practices with vmware vsphere 5.1

  Hello

  Here is a link to a PDF file that covers best practices for ESXi and EQL.

  Best EqualLogic practices ESX

  en.Community.Dell.com/.../20434601.aspx

  This doc mentions specifically that the storage Heartbeat VMKernel port is no longer necessary with ESXi v5.1.  VMware has corrected the problem that made it necessary.

  If you add it to a 5.1 system it will not hurt.  It will take an IP address for each node.

  If you upgrade 5.0 to 5.1, you can delete it later.

  Here is a link to VMware which addresses this issue and has links to other Dell documents which confirm also that it is fixed in 5.1.

  KB.VMware.com/.../Search.do

  Kind regards

• [ADF, JDev12.1.3] Best practices for maintaining a form validation

  Hallo,

  in my application, I need to create a registration form which contains fields that must be validated (for example they should follow a format like e-mail, phone number, tax code,...).

  If the data inserted by the user are ok, a new record in my custom db table Users will be created.

  I would like to know which are the best practices for maintaining the validation, which means the place where the controls must be made and a message to the user who fills out the form when something goes wrong.

  The best vo or EO or managed bean? Or some controls should be put in the OS, others in the VO and other in the managed bean?

  I would be happy if you could give me some examples.

  Thank you

  Federico

  Assuming you want the validation on the value of the field to any screen data can be entered in (and possibly web services that rely on the same BC ADF) then put the validation on the definition of the attribute in the EO.

  If you want to add a little more friendliness and eliminate some of the network traffic to the server, you can also implement the validation client in your page - for example by using the regular expression validator.

  https://blogs.Oracle.com/Shay/entry/regular_expression_validation