Error 80070020 when installing KB2656374

Similar Questions

• Error 80070020 when installing nVidia GeForce GT 230 M through Windows Update.

  Original title: suddenly my Windows 7 does not detect my nVidia GeForce GT 230 M

  Everything was going well until I tried to update the graphics driver through windows update... suddenly the solution of problems on my screen and everything is a mess now... the update installation failed, I tried again and again but did not work and it it gives me error Code (80070020)! I tried to download the driver from the official site but there not too... as if she has not detected any graphics card! I tried to look for the reader to "System information" and I went to check the display and I found nothing! as if it just disappeared in the air!

  Hey, Adnan,.

  This problem could be caused due to the update of the driver failed. Uninstall and re - install the latest drivers could do the trick.

  Reference: http://windows.microsoft.com/is-is/windows7/windows-update-error-80070020

  Here are a few steps, try.

  1. start the computer in safe mode.

  http://Windows.Microsoft.com/en-in/Windows7/start-your-computer-in-safe-mode

  2. find the nVidia GeForce GT 230 M under adpaters to display in Device Manager. In addition, let us know what other driver, you see under graphics cards.

  -Click Start and type Device Manager in the search start and press ENTER.

  -Press on the longer brand before graphics cards.

  -If you see the nVidia GeForce GT 230 M, right-click on it and choose Uninstall. You may be asked to remove the driver software. Press OK and continue.

  -You may be asked to restart the computer. Do not restart the computer.

  3. check that the software nVidia in programs and features.

  -Type of Control Panel in Start search, and then press ENTER.

  -Select programs and features , and then click uninstall a program.

  -Check the nVidia software. If found, select them and click Uninstall.

  -Once all nVidia-related programs are uninstalled, restart the computer and start the computer to nomally.

  Once the computer restarts, it will try to check for new material and to download and install display drivers.

  Since you have already downloaded the nVidia drivers, install them and restart the computer.

  Note: Do not install the drivers that are provided in the Windows updates. It is best to download the latest drivers from the website of the manufacturer of the computer.

  Hope the troubleshooting steps to help you solve the problem of video driver.

• Error code 80070020 when installing KB968930 and update KB2463332.

  I get the error code 80070020 when installing KB968930 and KB2463332. Install other updates.  Automatic Fixer MS says this update should be fixed, says he has set when I run, but nothing changes.  Vista Home premium 32-bit, service pack 2.  Update does not work in safe mode.

  WHMM

  80070020 ERROR_SHARING_VIOLATION

  These errors very strongly suggest that you see the effects of a hijackware infection.

  Instead you send on what could turn out to be a proverbial 'wild goose chase', I would recommend that you contact the Security Support for the MS consumer on all this.

  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy.

  If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

  Or you can...

  Start e-mail Windows Update support incident request
  https://support.Microsoft.com/OAS/default.aspx?Gprid=6527

  You can also start a support incident via the homepage of customer security: https://consumersecuritysupport.microsoft.com/

  For more information about how to contact your local Microsoft subsidiary for security update support issues, visit the International Support Web site:http://support.microsoft.com/common/international.aspx

  UTC/GMT is 20:44 Monday, May 21, 2012

• Will not install driver installer of EPSON Scan (L210) - ' error occurred when installing re start the computer, and then try again.

  Original title: problem installing scanner

  EPSON Scan (L210) setup driver moved - "is an error occurred when installing re start the computer, and then try again.

  Hey there, MAHIPALSINGH143

  Welcome to the Microsoft community forums.

  So that the community help to install your printer, we will need more information. Please answer these questions:

  1. Windows what operating system are you running (Windows 10, 8.1, 7)?
  2. The troubleshooting steps have so you far?
  3. Did you upgrade to a new operating system?
     1. If Yes, what operating system you were on before?

  When you look at the error message, it doesn't look like you need to update your drivers. You will need to go on the official website of manufacturers, with your EPSON.

  Here is the site for the EPSON drivers: http://www.epson.co.uk/gb/en/viewcon/corporatesite/support

  When I entered your model of "Epson Scan (L210)" number, it does not recognize the product. Would you be able to check and make sure that you have provided the correct model number? Your model is a new printer?

  Kind regards

• Error 1935 when installing scan snap xi500

  Keep receiving error message when you try to install the scan snap xi500.  Seven hours on the Helpdesk with Fujitsu does not.  Anyone have this problem?

  Hello

  Thanks for posting your query in Microsoft Community.

  I understand that you receive an error message when installing Scan Snap xi500 and I'll be happy to answer your query. Let me ask you;

  • What is the brand and model of the computer?
  • You are able to install any other application?
  • What security software is installed on the computer?
  • Are you logged on to the computer with administrator rights?
  • Your computer is connected to the domain?
  • Exactly how you try to download?

  There could be several reasons for not being able to install Scan Snap xi500. We will try to help you solve the problem.

  We will ensure:

  (i) you are connected to the computer with administrator rights

  (ii) try to download any other application to ensure that no problem with installation service in Windows

  According to the information provided by Fujitsu in the link of the questionnaire below, it seems that you are supported to fill out an application form in order to complete the installation process.

  Please refer to: Software Downloads: ScanSnap iX500

  Also, you can run the Microsoft Fixit who can automatically fix problems that block program installation or removal because of corrupted registry keys.

  Click to start Fixit.

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• Error 1406 when installing software Karl on windows 7

  Hello

  my system displays error 1406 when installing software Karl.

  Pls let me know if theres a problem with the system or the software

  and the solution to this problem as soon as possible

  thanking you...

  Guy srslly? Just go open Regedit.
  Hold the windows key + R, then type regedit
  then goto HKEY_LOCAL_MACHINE > SOFTWARE >
  and right clikc on Karl and then delete.
  Delete registry filed files and then reinstall kkkkk. :), hope it works.

• Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Hello mnaveen.kumar,

  Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  You can try to manually create the key to see if this will help.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Error 1722 when installing FSX windows8

  I tried to get FSX installed on my windows. I had installed it once and it worked but I had a hard disk problem and did a reset of programs and windows files 8.

  When you try to reinstall FSX it came at the end of this error 1722 and then cancels the installation and come up with another error to halfway, while rolling back and now I can't get install.

  Hi John,.

  Sorry to know that you are facing the issue during the installation of Flight Simulator X on Windows 8. The 1722 error message is a General Setup error message that States that a system level failure has occurred.

  Follow the troubleshooting steps suggested by Abdul Cyril Kola of this link and check if this may help:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-gaming/error-1722-when-installing-FSX-Windows-8/6d465c3e-9FB4-4287-aa5e-631c30b1c6ae

  Also see this Microsoft article:

  Error 1722 when reinstalling Flight Simulator X

  http://support.Microsoft.com/kb/928080/en-us

  I hope this helps. If you need help with Windows, let us know and will be happy to help you.

• Error 1722 when installing Adobe Acrobat

  I need HELP! ,

  I'm trying to install Adobe Acrobat in Lenovo laptop (Windows 10). I get error 1722 when installing to halfway through the installation and error pops up (error 1722) and configuration to be restored.

  -J' tried to uninstall the previous version

  -J' update of the system via Windows Update

  Please give me a solution

  Thank you

  Konrad

  Installation, update and subscribe to Acrobat

  Post edited by: SRAVAN KUMAR

  Error "1721 or 1722]:..., there is a problem with this package" installation of Adobe Creative Suite 4 | Windows

• I get the error code 80070020 when installing windows updates and also my computer crashes a lot. How to fix?

  I'm unable to install all the updates of windows - getting error code 80070020.  Have tried the suggested steps and they didn't work.
  Also can't get with my computer freeze.

  Did you just listed:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates
  http://support.Microsoft.com/kb/883825

• Windows Update Error 80070020 cannot install updates.

  I was not able to install updates 12/06/2012 when the Update window 7.6.7600.256 Agent has been installed.  When I try to update I get - install new Windows software update: to check the updates, you must first install an update from Windows Update. To install the update, windows update will automaticall close and reopen: install now. Then get error 80070020 again. Latest installed update was KB2677070 12/06/2012

  I am running Windows Vista Home Premium SP2, 32-bit which is an original except adding Service Pack 2 version when SP1 has expired. I also Norton 360 antivirus - had McAfee on the computer but deleted. Not sure how he got there. Tried to do a reboot also own safe mode without success. Mr fixit displays by default windows data update locations have changed and need to be repaired. Windows Update moved to the default settings of Windows. Do not know how to proceed.

  Thank you for your help. WRQG

  Hello

  This problem can occur if a program (most probably antivirus) interferes with the automatic update process.

  Perform the steps in the following article and check:

  You receive error 0 x 80070020 when you use the Windows Update Web site or the Microsoft Update Web site to install the updates

  http://support.Microsoft.com/kb/883825

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Let us know if it helps.

• Windows Vista - error 663 when installing updates

  Updates failed for a few weeks now and get error Code 663.  I checked the forums online and cannot find a solution. Your help will be greatly appreciated.

  Please are updates, you referring?

  Are the updates for the office or the .NET Framework?

  If Office updates for Office 2007, Office 2003 or Office XP, and see-
  You receive an error message when you install an Office program or you open an Office program or a document
  Run the Fixit on this page. If this does not resolve the error, then see.
  Error message when you try to install some of the Office 2003 or Office XP Update: "no valid sequence were found for the set of patches" If the updates are for a .NET Framework, see - Update: what to do if the other .NET Framework installation troubleshooting do not help
  
  NOTE: Windows Vista NET Framework 2.0 and 3.0 are components of the OS; If you need to run a repair of the, only way to do it is to do an "in-place upgrade", aka, repair Installation of Vista.

  You can do a repair of the .NET Framework 3.5 SP1 or .NET Framework 4 viaprograms and features (not add/remove programs) in Vista.

  MowGreen
  Expert in Windows IT Pro - consumer safety

  * - 343-* FDNY
  NEVER FORGOTTEN

• Code error 800b0100 when installing update Vista KB979559

  I am running Vista SP2, when you try to update KB979559 I get error 800b0100 code.

  What should I do? I tried disabling my firewall. still the same error.

  Description of the update of the system for Windows Vista tool
  http://support.Microsoft.com/kb/947821
  0x800b0100 - TRUST_E_NOSIGNATURE - no signature was present in the subject.

  Error message when you try to use Microsoft Update or Windows Update Web sites to install updates: "0x800B0100.
  http://support.Microsoft.com/kb/956702

  TaurArian [MVP] 2005-2011 - Update Services

• ERROR: 0x8007F0F4 when installing updates in the Windows XP computer.

  Original title: ERROR: 0x8007F0F4.

  I get this error code when Win Update turns on and I'm trying to download/install. It's boring. The update never installs and then returns icon in the systray... what to do, ignore?

  Hi Kota57,

  You did it of any material changes or software on the computer before this problem?

  This problem can occur if any of the following scenarios exist on your computer:

  (a) you are trying to update your laptop when it is running on battery power.

  (b) the update installation program detects that the update is incorrect for your computer.

  (c) updates have not been installed on your computer.

  You can follow this link and check if the problem persists.

  You may receive a "0x8007F0F4" error code when you try to install the updates on the Windows Update Web site or the Microsoft Update Web site

  Hope the helps of information.

  Please post back and we do know.

• Fatal error 1603 when installing my printer software. How can I fix it?

  When I insert the disk to install my printer, the installation is interrupted with the fatal error 1603.  What is the solution?  I use Windows XP.

  Hi rlbass,
   
  -What is the brand and model of your printer?
   
   

  Try to reregister the Windows Installer Service, and then install the product again by following this step:

  a. in the menu 'Start', click on ' execute:.»
  b. in the "Open" box type "msiexec /unreg" and then press ENTER.
  c. on the menu 'Start', click 'run '.
  d. in the "Open" box type "msiexec/regserver" and then press ENTER.

  You receive an "error 1603: a fatal error occurred during installation" error message when you try to install a Windows Installer package
   
  Check if this helps you.