Satellite M60-162: the system hangs after connection of SD card

Similar Questions

• Portege M800 - the system hangs after connecting to fingerprint

  I just got my Portege M800 weeks ago and frankly speaking, this model has been giving me a lot of trouble. Earlier, it's heat problem in the palm rest and there is no solution for it.

  Now I am facing another problem with the connection of fingerprints. I'm running on Windows XP. I put the system must be locked after 5 minutes of inactivity. So normally after 5 minutes of inactivity, the system will have to be me to scan my fingerprint to open the windows. But there are moments which, after analysis of my fingerprints and put in correspondence with success, the screen will be just white (only show the desktop wallpaper). Not the desktop icons, no taskbar windows and nothing. Press Ctrl + Alt + Delete to bring up nothing and no answer even not a button. I tried to put the system to Hibernate by press the power button once as no response.

  So I have to finally press and hold the power button to reset the laptop.

  No matter which can help or give any idea of what was going on? Thank you!

  Hello

  I believe that these issues are in the past fixed with the new version of the fingerprint reader. Have you tried to install the latest version or you already have?

• Window remains white screen after starting windows screen. the system hangs after Mup.sys on safe mode

  The title pretty much everything said.

  The problem occurred on a fault that Dell Vostro 2510 with the additional option should only do the downgrade of Win Xp (from Vista).  As noted, on normal startup, the system will remain in a blank screen after the Windows Xp "loading" screen.  And on safe mode, it will join Mup.sys and then hang there.

  The closest thing that I got from a web search was a thread in forum saying that the official info from Microsoft was that it was a question of Win Xp/motherboard (http://www.hardwareanalysis.com/content/topic/31874/?o=40 halfway to a post by Bobb Fwed).  The poster provided no link, so I don't know how official his info was really.

  Thank you
  -joe

  Contact the Dell Support under conditions of your warranty or Service contract. I suspect that you look at a clean install of Windows here. Good luck! ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• The system hangs after the installation of KB82286198 & KB980408

  system crashes after windows starts after windows update downloaded Security Update kb82286198 02/08/2010. problem solved after that I go into safe mode and uninstall the update even and reset manual download options. Same thing happened in April after Windows update kb980408.

  Hello
  
  Please cross check, the number of update must be Ko 2286198.
  
  This update will protect your system from a remote attacker unauthenticated to compromise your system and take control.
  
  For more information visit http://support.microsoft.com/kb/2286198
   
  You can try to download the update from the link below and install it clean in boot mode.
  
  http://www.Microsoft.com/downloads/en/results.aspx?pocId=&freetext=2286198&displaylang=en (select the update based on the operating system installed on your computer.)
  Put your boot system helps determine if third-party applications or startup items are causing the problem.
   
  Try the steps in step 1 in the article to put your computer in clean boot mode.
  http://support.Microsoft.com/kb/929135

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• Vista SP2 enterprise. Updates to Windows from 11 August caused the system hang after starting.

  Œuvres of mouse pointer, but the catch systems when I click on any element of the bar of tasks or office. OK works in safe mode. System Restore to a date before the updates does not help. I've eliminated all unnecessary programs in menu start, including NVIDIA drivers, but the problem persists.  Any suggestions?  Thank you!

  Hi Mathew and Imran;

  Thank you.  After several reboots, add and remove services, I believe a solution to the problem.   It seems that McAfee Total Protection disliked among updates August 11... or the update did not like 'total Protection '.

  After much frustration, I removed any trace of McAfee, first using windows uninstaller, then running the downloaded program to uninstall McAfee. I then installed Microsoft Security Essentials and downloaded and re-installed McAfee Site Advisor.

  I don't think I have the same level of protection as I had before, but the system is faster and I think that I have an adequate level of security.  I'll leave it as it is for now.

  I don't want this post as a blow against McAfee, they are an industry leader in computer security and 'Total Protection' provided exactly that.  We have a second PC in our House... material of identical office however, but under Vista Home Premium, whereas this one is running Vista Business.  Home Premium system runs 'Total Protection' and has not experienced the same problem, as the system of the company.  What's up mind dat?  It runs more slowly, probably because of McAfee files analysis procedures.

  If Security Essentials works well in the coming months on this system, I can install it on the other system, as well as on my laptop.  In more than 10 years (from Windows 98 to Vista), we always used McAfee products and have NEVER had a viral infection.  Is it because of MCafee or our own due diligence?  Assume that this is not serious.

  Thanks again for your help.  You got me on the right track!  Best regards... TeeDubTW

• System hangs after connecting a USB device in Satellite A110

  Hello
  I have a Satellite A110 (psab6c). Whenever I plug an ino device USB my computer it crashes and I have to put it off and then on again and remove the USB device. I looked for the drivers, but I can't find.
  I use Windows XP. Can someone help me? Thank you

  Riledogg

  I'm sure that there is a driver problem. See the manuals. It must be described how to properly use this external device.

• The computer hangs after connecting first time. Dell Support Center will not stop running. Windows has blocked some startup programs.

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Last week, I used Ad-Aware, Spybot and malware to scan my computer.  They found several things, but my problems are now: computer falls down after a time of connection the first only.  The center of Support Dell continues to operate for a few minutes, I just cancel now.  "Windows has blocked some startup programs" keeps popping up in the lower left corner.  I uninstalled Spybot but do I have to uninstall the other 2?  During these changes last week, I changed too Trend-Micro (which was nothing capture) to the free version of AVG.  Help, please.  Muzictchr

  Hey muzictchr

  did you completely remove micro trend in your system

  You can use an installed antivirus or conflicts occur

  Use the tool to uninstall micro trend from the link below to remove all vestiges of what it may be the cause of conflicts with avg

  http://eSupport.trendmicro.com/1/How-do-I-remove-old-or-new-versions-of-trend-micro-products-in-my-comp.aspx

  Walter, the time zone traveller

• The system hangs after upgrade Windows XP to Windows Vista premium,

  I upgraded my windows xp to windows Vista premium edition and it freezes all the time now, want to release until I press the off button and it shuts off and turns back on.

  Hello

  1. the manufacturer of your computer had vista drivers available for you to download and install on your computer to model?

  2 - is your computer meet the minimum requirements of vista?

  http://Windows.Microsoft.com/en-us/Windows-Vista/products/system-requirements

• System hangs after upgrade to 'Windows 8 preview version' to 'Of Windows 8 preview with media center version' when connected to the Internet

  I use "Windows 8 preview version" for the last 4 months.

  I recently updated the system 'Windows 8 preview with media center version', but my system hangs after each start and restarts.
  It works only when I disconnect from an Internet connection. Once I connect to the internet, the system shows new blue screen. Now, I don't even have a system restore to go back to the previous configuration.
  I want to use internet on a system without the system get crashed, please help me solve this problem.
  I am using Dell Inspiron 15R

  The minidump files display a stop error message DPC_WATCHDOG_VIOLATION (133) referencing the netio.sys:

  BUCKET_ID: 0x133_DPC_NETIO! StreamInjectRequestsToStack

  The netio.sys is a Windows driver that is involved in the "networking."

  The process that crashes regularly is avgnsa.exe which is a process of AVG.

  I would say to uninstall AVG and see if the accidents to solve.

  He also seems to be a remnant of a previous installation of Trend Micro (tmtdi.sys) driver.

  If you had previously installed Trend Micro plan to run the following Trend Micro removal tool:

  http://esupport.trendmicro.com/pages/How-do-I-Remove-Old-or-New-versions-of-Trend-Micro-Products-in-My-COMP.aspx#.

  If you're running Windows 8 pre-release version of the software consider using just the built-in Windows and antivirus software firewall rather than any third-party antivirus or firewall software.

• Satellite M60-162: vertical and transparent stripe on the screen

  Hello

  Satellite M60-162 appeared a transparent white vertical stripe on the screen of my laptop. The band is present at startup in the BIOS and in normal operation of the computer. How can I fix?

  No doubt with the replacement of the screen.

  A few years ago I had old Satellite M70 and it had a horizontal white line on the top of the screen. The line was also visible all the time, in the BIOS, when the home Toshiba screen showed and using OS.
  I replaced the LCD screen and everything was OK again.

• Satellite M60-162: problem gambling (game)

  Hello
  I bought a Satellite M60-162 to use for work and a bit of entertainment (including games).
  It happens that all types of game, I installed (Medal of honor, C & C Generals, Nba live 2005, MS Flight simulator 2004) breaks down when it is run (just click on 'play' and after a while, the game crashes). The installation program ends normally, but every game crashes.
  The only game that works is 'The elder scrolls III - Morrowind '.
  I have updated with patches - if available - all games without any profit.
  I also updated the graphics (Ati mobility radeon 700) driver and installed the DirectX 9 .0c. Nothing has changed.
  Finally, I ran a test for the graphics system (3D Mark 360) to check if there were hardware problems. All tests have passed.
  I don't know what I could do to remedy this situation.
  Thanks a lot for your help.

  Hello

  Believe me it's not easy to say why it happens.
  It could be a driver problem or a software problem (game). The only way to know why it happens is to test the device with different settings. Try using a lower screen resolution during the games. Try to change the game settings.

  Windows XP performance settings that affect the visual appearance of the operating system, most of the games have buried in their menus of Options graphic settings. The trick is to find them.

  I found a very useful and interesting article how to optimize the parameters of play for performance and looks. Please click the link:
  http://www.Microsoft.com/windowsxp/using/games/learnmore/optimize.mspx

  Maybe these tips will help you

• Satellite M60-162 cooling fan

  Dear users of Toshiba,
  is it normal that my Satellite M60-162 new cooling fan is often turned on and off with the normal energy profile selected in the toolbar State Windows XP?
  Sometimes I want to turn off my Satellite only because I'm confused on the noise generated by the cooling fan!

  Kind regards.

  Hi Fabrice,.

  Yes, it is quite normal that your fan to kick in all few minutes (my A30 will systematically even if only displays the desktop).

  Toshiba power settings usually have a 'silent' option which helps to reduce the volume of fan activities (by slowing down the speed of the CPU) that can help, but it is still likely that the fan lights from time to time.

  Excessive activity and the fan noise is a common problem that is often discussed in this forum and is probably the result of trying to put as much of hardware and software in such a small case.

  Kind regards

• Microphone internal satellite M60-162?

  Dear users of Toshiba,
  can someone tell me how to turn on the internal microphone on laptop Satellite M60-162, if any?
  Thanks in advance.

  Kind regards.

  Hello

  Not according to the specifications of your device, there is no internal microphone. I'm sorry.

• XP hangs after connecting an external hard drive via USB port

  When I connect an external hard drive of 250GB via a USB port on my system XP - SP3, the computer crashes immediately after the sound signal from the recognition of a normal connection PnP. There is no assignment of the station. I don't know that he had worked as can be expected before. A new 500 GB external hard drive is recognized as new hardware, the driver installed and ready to use, but after that, the PC shuts down completely new. However, when I do a system startup after connection of the same two drives, everything looks OK. Also, no problem with a USB stick of 2 GB. How to find what's the problem?

  Well - it's Windows for you, sometimes. :/

  Good luck with your new installation!

• System hangs after installation of security.

  My Dell computer freezes.
  After the installation of Verizon's Internet security suite.
  I restarted and was ased by adobe acorbat to install a undate immediately.
  I did and rebooted again.
  Now when my office is ready, if I hit any key, the system hangs.
  Can I restore back a few days in "safe mode" may solve my problem?

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  See you soon.

  Mick Murphy - Microsoft partner