Best tolerance\failover of fault for two identical ESX 3.5 hosts

Similar Questions

• Network configuration for two virtual machines on a host

  I have two XP running on a Vista 64 host using 6.5 guests.  I would like to power instant message between the two guests.  I use the option open, and each guest can comminicate outward, very well.  However, if I send an instant message from one guest to another, the message can't.  All parameters in the virtual network editor are the default values on the two hosts.  Thank you.

  so IM between two virtual machines should work as well.

  There must be a factor that we haven't talked yet - any ideas?

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Configure two MS for two databases on a single host, EM for first DB cannot open

  Hi all
  
  My 10 g database version 2.
  
  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.
  
  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em
  
  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.
  
  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.
  
  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?
  
  I thank you very much in advance and wish you all a great weekend!

  PhoenixBai wrote:
  Hi all

  My 10 g database version 2.

  In the beginning, I created a database called "ORCL" and configured the EM to her, not manually of course. and it was working fine.
  Then, later, I found that I need to install a second database called "ORCLDW", and since I have used DBCA to create, EM is configured automatically as well.

  EM for ORCL is: http://phoenixbai:1158 / em
  EM for ORCLDW is: http://phoenixbai:5500 / em

  the problem is that the EM for ORCLDW works perfectly fine, even if I can't open the EM for ORCL.

  When I use 'emctl start dbconsole', it works for a very long time, but still, he tells 'EM for ORCL is started successfully.
  However, when I try to open the URL: http://phoenixbai:1158 / em
  Once again, it lasts very very long and doesn't have to open it.

  Then, someone at - it never met the similar situtaiton?
  someone has an idea of what could be the reason? and how to check and fix it?

  I thank you very much in advance and wish you all a great weekend!

  the default behavior for OEM is that it supports a single database for each host
  If you need to support multiple DBs, use Grid Control.

  BTW - OEM is NOT necessary to run or support of Oracle's RDBMS

• DMZ Canals to allow the VM Update Manager 4.0 Update 1 for work FRO ESX 4.0 Hosts?

  Hi all.

  I'm trying to get two ESX 4.0 servers in the DMZ to be allow to get patched by our internal server VMupdate Manager... Having a few problems to work through our firewall and was hoping that someone who post the ports required to make this work? When I scan the host I get this error:

  Host cannot download Vmware Update Manager patch store files. Check your network connectivity and configuration of firewall and esxupdate logs for more details.

  ESX host connects to the Manager to update through port 80. The reverse proxy forwards the request to 9084.

  For host ESX sweeping and sanitation, Update Manager requires that port 80 be open on the ESX host.

• Certificate error on one of the two identical systems?

  I recently installed Ubuntu 12.04, PC01 and PC02 two COMPLETELY identical systems. The browser is the latest version of Mozilla Firefox.

  When visiting https://www.komplett.dk/k/signin.aspx with cp01, the connection is secured and everything is OK, no error message. When you visit the same URL with PC02, the following error message appears:

  ---
  This connection is Untrusted

  You asked Firefox to connect safely to www.komplett.dk, but we cannot confirm that
  your connection is secure.

  Normally, when you try to connect safely, sites will present a reliable identification to prove
  you go to the right place. However, the identity of this site cannot be verified.

  What should I do?

  If you normally connect to this site without problems, this error could mean that a person is
  trying to impersonate the site and you should not continue.

  Get me out of here!

  Technical details

  www.Komplett.dk uses an invalid security certificate.

  The certificate is not approved, because no sender string has been provided.

  (Error code: sec_error_unknown_issuer)

  I understand the risks
  ---

  Why is - what happens when systems are COMPLETELY identical? I tried to delete the folder of profile on both systems, but the result is the same. NO certificate has been installed manually on cp01, so this isn't the reason. The size of the file cert8.db on cp01 is 94K and on PC02 is 64K, I don't understand how the size may be different when profiles are newly created.

  I really want to know why, I feel a different behavior with Firefox, on two identical systems, so any suggestions or ideas are welcome.

  Note that Firefox automatically records the intermediary certificates that send servers in Manager certificates for future use.
  
  So, you can't see a mistake if you have visited a Web site in the past who did send the intermediate certificate.
  
  If you have ever visited a Web site that uses the same intermediate certificate then Firefox it has not registered and you will get an error unreliable.

• My drivers optical dvd rw disappeared two identical - poster Device Manager! mark beside the two circles in yellow

  Yes I know I'm a dinasauer still under kind of WinXp Pro Home edition use it - my burner gone--not recognized by my computer - I checked the Device Manager, they are there, but the two identical optical dvd rw drives have a! Mark surrounded both in yellow that I restored the system when I had a player that nothing changed - Help! Looks like I need some drivers, but I thought that windows would have covered them in case of default?

  Hello

  1. What is the exact error message you are getting?

  2. don't you make changes to the computer before the show?

  Please follow the steps from the link below.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://support.Microsoft.com/kb/322756

  How to back up and restore the registry in Windows

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

• HA Dell two, Sonicwall for two ISP links configuration

  Dear experts,

  I have two Dell SonicWall NSA3600 with two ISP links.

  Currently one that nsa3600 with two links ISP uses with configured load-balancing feature.

  Now I want to configure hardware failover using NSA3600 secondary.

  I know how to configure hardware failover with NSA3600 unique using two Internet service providers.

  But I have no idea about 'How to configure hardware failover for two NSA3600 with two Internet service providers.

  You have an idea on that?

  Thank you.

  Warm greetings,

  Zaw

  Hi Zaw,

  According to my understanding of the question you posted "How to configure hardware failover for two NSA3600 with two Internet service providers. »

  If so there is no special configuration is required. It will be like the regular HA installation. the 2nd Internet service provider, you need a switch connecting the two NSA 3600.

• Implementation of QOS for on multiple switches for two VLAN

  afternoon all that I was looking for a little help in configuring QOS for two local area networks VIRTUAL, I created. These will be for voice traffic vlan 22 and traffic video vlan23. I also have three other VLAN for pc, wireless devices and our cnc machines. We have 5 switches which are all SG30028P with a single switch making the intervlan routing (Layer 3-powered). all switches are resources shared by the main switch and ive been through the guide written on how to do it on a single switch, which I think is layer 3.

  could someone help me with what I want the video and voice to take precedence over the rest of the traffic

  best regards Patrick

  Right, this way, you can give priority to IP or MAC address.

  No, there is nothing different, only one review of the routing. As the L3 switch can make local routing decisions, the placement of the ACL can vary. In an L2 environment, all packages are transferred to the router, then back down the network to the local destination, so you can clear an ACL on the uplink.

  Since you have a L3 switch, you can practice the same, empty an ACL on the link downstream for L2 switches for all traffic subject to the ACL. Any connection to the L3 switch, you can of course apply an ACL to the uplink router to get all notice of incoming traffic correctly. You can also apply a policy on port source interface to get the note as soon as traffic hits the switch.

  QoS policy is the concept of an ACL, you want it is the closest to the resource. If you apply a QoS policy an uplink upward, QoS will be marked up when it hits this port. Not before. So it should be applied closest to the device as possible. Many times, local QoS is not as important, until it starts to get to the router. As most Cat 6 environments can generally manage all local traffic. So, depending on the number of devices and the amount of traffic, a decently robust network can handle all traffic local then you just give priority to the uplink remarks to ensure that what is important is first.

• Facing a problem with writing the custom for WLS identity assertion provider

  I am facing a problem with writing the custom for WLS identity assertion provider.

  Requirement:

  Asserter identity configured in WLS should get called when the following cookie is sent in a request by my application
  cookie name: OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I added the name of the cookie as a token of support and Active token in WeblogicCustomIdentityAsserter.xml
  
  < MBeanAttribute
  Name = "SupportedTypes.
  Type = "java.lang.String [].
  Writeable = "false".
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >
  <!-ActiveTypes attribute contains the subset of your mbean SupportedTypes who are active in the area. ->
  < MBeanAttribute
  Name = "ActiveTypes".
  Type = "java.lang.String [].
  Default = "new String() {& quot; OAMAuthnCookie_blr1234567.idc.oracle.com:7777 & quot ;}.
  / >

  Problem:

  Identity asserter provider is not invoked for the request that has the cookie named OAMAuthnCookie_blr1234567.idc.oracle.com:7777.
  
  I did some experiments with the cookie name, to see where the problem could be
  
  Identity asserter provider is triggered for the following cookies:
  OAMAuthnCookie_blr1234567.idc.oracle.com7777.
  blr1234567. IDC. Oracle
  blr12_XXX. IDC. Oracle.com
  
  and it does not work for cookie name - OAMAuthnCookie_blr1234567.idc.oracle.com:7777
  
  I think that the name of the token supports not the colon. I don't have control over the name of the cookie, two points will always be
  
  Tried it with giving the name of the cookie after the encoding of the colon
  

  < MBeanAttribute

  Name = "SupportedTypes.

  Type = "java.lang.String [].

  Writeable = "false".

  Default = "new String() {& quot; OAMAuthnCookie_blr2211441.idc.oracle.com & #58;. 7777 & quot ;} »

  / >

  
  But still does not work
  Am I missing something? Any help will be appreciated.
  Help, please!

  colon ': ' is an illegal character in the name of the cookie.

  RFC 2616, Section 2.2 says:

  token = 1 *.

  separators = "(" | ")" | " <" |="" "="">" | " @"

  | "," | ";" | ":" | " \" |<">

  | "/" | "[" | "]" | "?" | "="

  | "{" | "}" | SP | HT

  It is clear ":" a "separator" and thus not allowed in a token or a cookie name.

• GREP: find two identical consecutive strings

  Hello

  I should find all occurrences of two identical words (or string) which occur consecutively, as those at the beginning of this sentence. Is this possible with the ID?

  I would have thought that

  (\w+) $1

  It would, but it's not.

  The syntax of a search string is different from the chain of change. Use the following syntax:

  \1 (\w+)

  - but he will find one or more consecutive characters of same separated by a space. For example, it will find your "find find" but also "t t' in ' to the '.  If you want to find whole words only, a good first attempt would be:

  \1 (\b\w+)

  but it will fail for a few fairly common phrases. She will find 'for foreign countries","in international relations"and"be better ". To find words in doubles only, use this:

  (\b\w+) \1\b

  or even that; a little better because he will find reanalyses thus:

  (\b\w+) (\1)+\b

  Edit: Hi Eugene.

• ADF BC: Choose between two identical DB schemas on the application startup

  Hello
  We want to provide users the ability to choose between two identical db schemas.
  Anu idea how?
  

  Cvele wrote:

  -No, my idea is to just drop-down list (selectOneChoice) with available data sources

  Then it would be quite similar to my example, except that in the JSP page you have an input field, but the drop down menu. The underlying values of the different choices in the drop-down list would be different JDBC data source names (or alternately a string that your middle-tier code would then become so JDBC data source names you don't want the JDBC data source names to appear in the 'View Source' in your HTML page) for example).

  -Aaa, I think I understand now, correct me if this evil: in the app, my data controls is currently configured to use an App module even Configuration with data source connection.

  However, at the level application server, at deployment time, I have to define two distinct dataSources and map to point to the my two diagrams separate db, correct?

  Fix.

  And on the login page, I fall to the bottom of the list with two options, one for each db schema. True values for options is a names of data source that is set to the name of the application server.

  Or with a level of abstraction as I mentioned above, if you don't want to "View Source" in your HTML page to contain the JNDI names themselves. The list can contain logical names such as the 'db1' and 'db2' which, inside your classes of dynamic authentication information, you could turn the 'db1' string in some "jdbc/DatasourceNameForDB1" and similarly to turn the 'db2' string in the datasource JNDI name.

• I bought the app bundle and charged separately for two apps

  Hello.

  This was my first purchase. I bought the boundle app on App Store, ('The Go Collection' for 1 euro) and charged for two applications 2 euros on my bank account. What should I do? And also I have received everything or anything.

  How does show on the purchase of your account history: view your purchase history in iTunes on Mac or PC - Support Apple store or http://reportaproblem.apple.com on your phone? If you have been overcharged (by example part of the load is not a temporary store holding the load, which should be automatically reimbursed by the card issuer in a few days or more: on the payment card's authorization in the iTunes Store - Apple Support) and then contact iTunes support via the site 'report a problem' above

• Can I use symbolic links to share the file abook.mab for two users

  If I delete all the user profile .mab files and replace it with a symbolic link pointing to the same file in the other profile will be what sync my address for two profiles books. I have win7.
  The object is to have two user accounts Windows sharing the same e-mail data. I already have them show up on the same basis of messages.
  I would like to know if deleting a .mab file will only cause it be re-created.
  I hesitate to experiment.
  Thank you

  Remove files two default mab, abook.mab (PAB) or history.mab (collected addresses) will result in empty files with these names are automatically re-created on reboot of TB.

  There are a few ideas for sharing here address books:

  http://KB.mozillazine.org/Sharing_address_books

• Why is there the databases for two Web sites in my appdata roaming default firefox profile folder?

  Www.fling.com _ C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\http_

                                                                                                                                                                        C:\Users\user\appdata\Roaming\Mozilla\Firefox\Profiles\i4unw84s.default\databases\https_cashier.bovada.lv_
  

  Two of these databases of site are 64 KB and io_temp.sqlite files. I want to know how they were created and what information is that are stored there. I know that my boyfriend goes to the website of bovada much, but want to know if he has information of personal connection stored for two of these sites. I know that they are not cookies because I saw the list of cookies and delete the and these files are still there. I really want to know if the only way that the sites Web could be in the folder because he saved intentionally information stored on these sites and if not, then why they are part of a roaming profile?

  Hello, I could not find any documentation on what the data in the profile or an io_temp.sqlitefolder - file would do in firefox (perhaps it was a first version of dom storage or indexeddb).
  If you have questions about the use of these sites by your boyfriend, you should probably talk with him directly about this, instead of finding an answer in this way...

• Why does a minute remaining on download for two hours

  Recent upgrade of OS was arrested at a minute remaining for two more hours. Is this normal or a problem?

  Give it more time.

  Installation can be perform tasks that are not included in the count.