My drivers optical dvd rw disappeared two identical - poster Device Manager! mark beside the two circles in yellow

Similar Questions

• CD/DVD-ROM problems, drive not detected AND the category of CD/DVD-ROM does not appear in Device Manager

  I'm having serious problems here. My CD/DVD-ROM drive is not detected and will not answer. I can ONLY open the drawer at the beginning of my computer laptop startup. The drive does not appear in my computer and the category of CD/DVD-ROM does not appear in Device Manager. Therefore, the "uninstall/reinstall" is impossible if the computer behaves as it has never been this drive now or never. Previously, I was able to use it as there was no problem, but someday, it's simply not there.

  http://support.Microsoft.com/kb/982116/en-AU

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  See if the information above solves the problem.

  See you soon.

  Mick Murphy - Microsoft partner

• CD/DVD drive are not not in Device Manager

  Original title: CD-ROM/dvd-rom _

  There is no category listed in the CD-ROM/dvd-rom Device Manager and so I can't update the correct driver

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• HP Pavilion with Vista: Matshita Dvd - ram UJ 861 H ATA Device is disabled in the Device Manager.

  filter of device drivers are corrupt; class filter drivers are corrupt.  I've already replaced the hardware player with SPARE HP 448005-001.  With auto drive disabled, detection of new drivers is not past.  This isn't a hardware problem.  Computer, registry and Device Manager do not see this disc/device.  Mats_run.dvd and Microsoftfixit50123 were used.

  Hello

  Drive or cable might have a problem.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot find CD/DVD drive in my computer on Device Manager. CD - DVD does not work

  I recently discovered that my CD/DVD drive does not work. It worked fine before. Tried to burn a CD in iTunes, but the error message says that the software or the CD device could not be found.

  My CD/DVD drive does not appear in the computer or Device Manager. I have read a few forums and tried to delete upper and lower filters, but that no longer works. Help, please.

  I am running Windows Vista - it came installed on my computer when it was purchased.

  Hello

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• CD/dvd drive is not listed in Device Manager

  my laptop is a hp pavillion entertainment pc dv6605us, running windows vista. the cd/dvd drive is not read / write any CD and it is not listed in Device Manager. I tried to fix this problem by using the microsoft fixit tool, but I'm still having the same problem. I checked the system registry and found no upperfilters and lowerfilters.
  Please, how can I solve this problem?

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the total process
  which solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista
  After starting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• Satellite M - DVD/CD ROM missing in my device manager

  My computer for some reason unknown to me, recognize or load content on any DVD or CD that I put in my combo drive. The disc turns and acts like it is loading, but nothing happens. I want to switch from XP to Vista. whether a disk of music or a dvd movie disc, it always does the same thing. I have a satellite M45-S2652. I tried the registration procedure and nothing has changed. Before that, when I clicked in my device manager and everything was ok, he read "(MAT *** un DVD) RAM UJ - 831 S."

  I tried to use my windows recovery disk, but the computer does not recognize it. I tried the restore later, when I clicked in my device manager, under DVD ROM, I saw a bunch of script gibberish with a yellow exclamation point, but the same thing was happening. Y at - it someone who had that same kind of experience and solved. Will you please help me to solve my problem. I want to upgrade to Vista.

  Thank you.

  Try to remove the CD/DVD filters in the registry.
  When the associated CD/DVD (such as iTunes, Nero, virtual CD software), the software is installed, they install filters in the registry, which can cause compatibility problems.

  (1) run Regedit (start-> Run-> Regedit)
  2) navigate to HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  (3) in the right pane, delete the "UpperFilters" key and delete the key "LowerFilters".
  (4) restart.

  If your CD/DVD programs stop working, you will need to reinstall them (preferably with an updated version).

  This utility can remove the filters for you:
  http://www.CSD.Toshiba.com/content/support/bulletins/su2065061/RmvFltrs.exe

  If it still does not respond, you may need to replace the DVD drive

• lost my controller ethernet and sm bus controllerafter reinstall Windows xp. Device Manager cannot find the drivers. Any suggestions?

  using a computer compaq Intel refurbished. At drivers before reinstalling windows xp. Try to join I have pad and Netflix via a NETGEAR router, but cannot do so without ethernet controller.

  Hello

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you want to reinstall the Ethernet drivers.
   
  If you could answer a few questions that would help us resolve this problem:
  1. What is the brand and model of the computer?
  2. do you have the CD/DVD driver provided by the manufacturer of the computer?
  3. are you able to connect to the internet?
   
  -We would like to say that you can install the network card drivers from the CD/DVD driver provided by the manufacturer of the computer.
  -In addition, you can download all these drivers on a USB of the computer manufacturer's website and install it on the desktop.
   
  Hope that answers your query. If the problem persists, answer us the answers to the questions above so that we can help you further.

• A30 - DVD player 'disappears '.

  Hi everyone, I hope someone out there can help.

  Problem occurred yesterday when I couldn't load a program from the cd-rom, I found that there can be no icon for my DVD player on desktop or in Device Manager.

  I reloaded the BIOS as the knowledge base has said, but it din't work. He worked for a while when I started, but again disappeared shortly after

  Help!

  Hello

  If you want to check a correspondent bootabl CD/DVD, start Notepad and press F12 for the boot menu!
  Then boot from the CD, when it starts the drive should be ok!

  Then the failure is based on windows and a restoration of the system must display the CD-ROM drive in the Explorer again!

  Otherwise, it may be a failure hardware look defective IDE connector or something. Then a Service Toshiba partner must be called for a short check up!

  Goodbye, TOK

• My Dell Desk Top DVD Player does not work. Whenever I have insert the disc and click here to read... I get the message insert' disc Please "."

  What is the faulty drive, or the software that is missing

  Hello

  What happens if you close all programs and then insert the disc?

  -------------------------------------------------------------------------

  If you have problems with CD/DVD drive:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• video and game drivers missing in my system device manager

  Hello, I have a computer laptop sony vaio with operating system Windows Vista home premium original on it. The problem I m dealing with, it is that my video drivers and game are missing. When I go to System-Device Manager and expand the sounds, video and game controllers the only thing that appears is the audio drivers, the other two Don t. How can I fix this, or, if West no physical solution, where can I re - download missing drivers?
  system model: VGNCR - 520 d, OS: windows vista Home premium 6.0, version of DirectX: 11.0, processor Intel core 2 duo processor T8100 2.10 GHz, 3 G of ram memory.
  Thanks since now, Anne.

  Hello

  you get your latest drivers direct sony vista

  go to the link below and key in your model number etc.

  http://eSupport.Sony.com/

  hope that works it for you

• Wireless adapter suddenly lost, disappeared from the Device Manager. How to prevent this?

  Hey :)

  Ive looked all over the internet, but still nothing quite similar to this...
  -Asus PC V551LB-CJ093H
  -Windows 8
  -Wireless network adapter: Intel Dual Band Wireless-N 7260
  The problem is: laptop suddenly loses wireless wireless adapter because suddenly friggin disappears from the Device Manager, as did not exist. Only the wired network adapter still works and all things Bluetooth. The only way to resurrect from the dead is to restart my laptop. But I don't like this solution X_x. How can I stop my laptop disconnect my wireless connection?
  What I've tried:
  Auto-updated the driver from Device Manager
  -' Find the hardware changes' on Device Manager
  -Disable "allow the computer to turn off this device to save power" the power of the device management
  The only thing that has worked now:
  -Restart the laptop.
  Thank you very much for your help :D

  Thanks a lot :) I've manually updated the drivers from the manufacturer's website (intel), and the problem ceased to occur. I will you update if anything... Thanks again.

• U350 webcam stopped working, Device Manager disappear.

  Hi all

  I'm hoping to get some help here. I have seen that other people had similar problems, but no satisfactory solution that applied. So go again us.

  I bought a U350 with Windows 7 home basic 32-bit.

  He came with a Bison/Lenovo Webcam which worked fine when I bought it. I usually use the camera with Skype.

  Yesterday, when using Skype, I noticed that the camera was gone, dissappeared.

  It does not show when I hit FN + ESC. I have reinstalled Power Manager, always the same question.

  It shows nothing in Device Manager. Imaging devices have disappeared.

  When I tried to add a new device imaging and added manually and stressed the downloaded driver, the driver installation begins. Then suddenly it stops with a warning saying: "no device in the setup.ini file is on this computer.

  I can't uninstall anything, because I don't see anything in the Device Manager. I can't install any drivers as the material seems to be undetectable.

  My wild guess is that the Webcam has stopped working or is disconnected from the motherboard. But maybe you have clues othere what this could be? Not detected by Device Manager means that the material is broken?

  Thank you very much!

  AJ

  If you script site and it has not detected any camera, possible problem of cable, connector or camera.

  I suggest you call lenovo support line and ship your laptop.

  Edit: because you need technical support, I've marked this issue as resolved.

• Two different processors in Vista on the Satellite M-series(1M8) Device Manager

  I have two different processors in the vista Device Manager:
  first pilot intel core 2 Duo T7100 and second Core 2 Duo T7700

  What this means and how do I use it?

  Thanks Klaaus

  Hello

  This is a bug of Vista ;)
  Just remove the processors the Device Manager and reboot the laptop.
  After the restart new Vista should recognize and refresh the information in the CPU.

  Best regards

• Pavilion Slimline s5-1020: DVD drive not recognized in Device Manager

  My rarely used DVD player no longer works. Here are the things I have seen/made:
  -J' updated to Windows 10. It may or may not have stopped working before the update.
  -I update Windows automatically, and everything seems to be in order there.
  -The DVD seems to be operational, insofar as you can hear it turn when a disc is inserted.
  -Setup recognizes, and it is enabled; It is not at all in Device Manager or in the file Explorer.
  Based on the things I've tried, there are indications that it may be either a hardware or a software problem (or both?):
  
  SOFTWARE PROBLEM?
  I followed these as much as possible:
  http://support.HP.com/us-en/document/c03370738#c03370738_NoDriveWin8
  http://support.HP.com/us-en/document/c03370738#c01895589_resetpower
  http://h30434.www3.HP.com/T5/desktop-CD-DVD-read-only/read-this-for-CD-DVD-drive-with-burning-Missin...
  
  -I got disconnected/reconnected the drive.
  -J' tried various DVD I knew to do.
  -I don't have to update the BIOS, given warnings.
  - Nor did I mess with registry filters.
  -J' tried to find a Microsoft Fixit solution, but the one referenced somewhere in these pages don't apply to this OS - I think it was for Win 7.  I tried MS Control Panel convenience stores, but none of them worked.
  So I can't say whether or not it is a software problem.
  
  HARDWARE PROBLEM?
  -J' have set the boot on the CD order in configuration and the desktop with Windows 7 HP Pavilion system repair disc - nothing happened, he went straight to the HD (even if I had turned off).  So that leads me to believe it may be a hardware problem after all.
  
  Do I have other options at this point, except maybe buy another drive?  And in fact if I do, it is possible that one does not work either?

  While you are not alone in this problem, here's a thread that deals with her.

  http://h30434.www3.HP.com/T5/desktop-operating-systems-and-recovery/CD-DVD-drive-not-detected-after-upgrade-to-Windows-10/TD-p/5172346

  See if that helps