ADF BC: Choose between two identical DB schemas on the application startup

Similar Questions

• I'm trying to put a Transition chained between two elements placed one above the other.  I tried and I failed.

  I'm trying to put a Transition chained between two elements placed one above the other. To the left of the line that she plays in the lower clip and after the line, he played in the clip above.  Is that it can be done when the two clips are on the other? I tried and I failed. Help please.

  Also how do you call this long line like?

  Thank you.

  simply put your 'top' clip where it belongs - in the scenario

  Select the clip, Option - command - down

  the secondary has no replacement for 'tracks '...

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• How to switch between two keyboards (Japanese keyboards have the double function of "direct entry"

  I have a laptop with keys 'English' and 'Japanese' on the same key board.  For example "A" key is also 'CHI' in Japanese, 'B' is also "KO" in Japanese.  How to switch between the two.  It changes itself.  This seems to happen after the mail in Hotmail changed in Outlook.

  Thank you

  Tomoko

  Hello

  Please go to the Microsoft Community Forums.

  From the description of the question, we understand that you want to switch between two keyboards entries.

  Let me go ahead and help you with the issue.

  Here are some steps you can follow to resolve the problem:

  Step 1:

  To change the default language, follow these steps:

  a. Click Start and then click Control Panel.
  b. double-click regional and Language Options.
  c. click on the languages tab, click details and then click Add.
  d. under input language, add the language that you want to use.
  e. under Configuration keyboard/IME, click the keyboard layout that you want, and then click OK.
  Note: Only users who have permissions on the local computer can configure the following options on the languages tab in the regional and Language Options.

  Step 2:

  To resolve this problem, change the hot key settings in your computer system. To do this, follow these steps:

  a. right click on the language bar and then click settings.
  b. in the Text Services and input languages window, click the Advanced Settings button select an action and then click Change Key Sequence.
  c. set keys and then save the settings.

  Hope that answers your query. You can write back to us for other queries/problems related to windows and we will be happy to help you further.

• Number of weeks between two dates that are in the same or different year

  Hello

  How to calculate the number of weeks between two dates?

  for example. "" "17-mar-2013' and June 27, 2013" or June 15, 2013 "and" 25-mar-2014
  

  
  

  Thanks in advance.

  lukx
  

  Hello

  Looks like your date range is incorrect.

  Please try the below.

  SQL >-front right

  SQL > select D2 - D1 "days."

  2 round ((D2-D1)/7.0) "weeks."

  3 round (Months_between (d1, d2), 0) 'months '.

  (select 4

  5 TO_DATE ('20121201', 'YYYYMMDD') D1, D2 TO_DATE ('20130116', 'YYYYMMDD')

  6 from two

  (7) date_range;

  Elapsed days weeks months

  ------------ --------- ---------

  46         7         1

• Windows Live Mail lists two identical hotmail accounts on the left.

  I lost my hard drive.  In reloading, I found myself with two accounts of Hotmail on the left side, but all messages in their Inbox are the same.  Then right-click and select Remove, he warns that it will delete the hotmail account.  I want only to delete the second screen of the same account.  How to remove duplicates?

  Depends on what version of the year of your WLM 2009 or 2011.

  They have different received to get accounts from email.

  Basically, tools > Options > account > see if you have 2 accounts Hotmail listed > If Yes, select one > click on delete.

  If this does not work for you, please repost in Windows Live Solution Center.

  http://windowslivehelp.com/

• Can I change the schema of the application when running?

  I created a workspace with 3 schema (for example three different customers).
  
  What software (starting with one of this scheme of three).
  
  I would like to know if it is possible to choose (by code) during execution of the schema to be associated with the application.
  
  Thanks in advance to all.
  
  Francesco Galante

  Try again with

  "ALTER SESSION SET CURRENT_SCHEMA [MY_SCHEMA]"on a logon after treatment. "

  Otherwise, you can create 3 different home page in 3 different applications that directly call the 4 'hand' app where the business logic in.
  Usually 1 app by schema.

  Search

• settings - choose between two

  Is it possible to have the choice of the parameters?
  
  Example - either the customer chooses a setting that gives the possibility of one or more different accounts, or the client chooses to enter information in two settings: FromAccount / / class.
  
  In other words, if the customer enters information in the first parameter, the second becomes inaccessible.
  
  Thank you.
  Leah

  I used the concept of an initial setting what information is used in a 2nd at the wheel. or 3rd parameter (in the old days of office) but even more I don't think it's possible to 'turn off' a parameter according to another.

  What I did would be like:

  parm1: Enter 'G' for gl_date or 'P' to the date range of process
  PARM2: enter DATE
  parm3: enter date

  In such an example, the use of parm1 is fair determination calculations for a condition relating to the execution of the query for gl_date or process_date.

  In addition, I used the same concept for parm1 if you want to use the date range that the user has entered in parm2 parm3 drive or use a calculation instead such as:

  parm1: enter "P" for the previous month or has ' for the date range
  PARM2: enter DATE
  parm3: enter date

  Then the condition would be to use the from / to date range or use a calculation such as: sysdate-30 or something similar.

  But again, never had a parameter blanked out so he could have his word.

  Your best bet would be to check a second time if more handles something you could use - because they have cascading parameters, etc. and if any tool could be used in this case it would be more.

  But I'm still what you want to do in Paris is not possible - at least not easily - that you're changing the operator (ie: IN BETWEEN versus).

  Russ

• Choose between two xml file date ranges

  Hello
  
  I have a date_ of column with the VARCHAR2 data type (150) it stores
  
  data in the form of
  19/05/2010 11:23
  20/05/2010 12:23
  22/05/2010 11:23
  25/05/2010 11:23
  
  
  I have to select all the lines between the 19/05/2010 and 22/05/2010 how do that this column found in the xml file

  Manaat wrote:
  2010-05-22 11:23 data is stored like this now, and the previous thing does not work on this format.

  So I guess you need to adjust the format.

  Something like:

  AND trunc( to_date( date_ , 'MM/DD/YYYY HH:MI AM' ) ) BETWEEN to_date('05192010','MMDDYYYY') AND to_date('05212010','MMDDYYYY')
  

• How to find the time between two channels of entry in the data acquisition card or pci 6036

  Hello

  I read a lot-related posts on the simultaneous measurement of two input voltage of similar channels in map data acquisition. I know that the best material is "simultaneous measurments of the Series DAQ cards" but I only pci data acquisition card 6036 and I try to understand what is the time between the reading of the two channels . This period is always constant? (must it rely on a voltage (amplitude, frequency, waveform..). I send the sine wave (s) to the two channels and read the values of V, if they read the same value, the difference should always be zero but I get-0,002 to 0.002 Volt difference (I must find a way to convert it in time). A screenshot of my VI is attached. I wonder how I can accurately measure the time delay between the channel.

  I am open to any suggestion, my final goal to read exactly two channels at the same time ((ou connaître le délai exact donc je peux correspondre les données correspondantes étant donné le temps de retard))

  Hi spinup,

  better you should post your question in the forum of LabVIEW, LabWindows/CVI is used

  Good luck.

• Delay in acquisition phase data between two lines connected physically on the acquisition of data NI USB-6289

  Hello

  Currently, we have two signals which are physically and logically linked together on the same line of data acquisition. The first, 'I' and the second signal, 'Q', are both related to "Ai6" (PIN 23) and "Ai GND" (Earth). However, when we probe the two lines coming our function "signal split", I drove Q by about 0.5ms. My question is, if these two lines are actually bound together physically and logically, then why are they phase shifted if they are both the same channel? They should be exact matches. I thought that the phase delay inter-channel occurs only in what concerns channels being read from data acquisition. I have attached a few screenshots as well.

  Input signal is 20 kHz. Sampling rate is 40.5 kHz, number of samples/point is 1000.

  Thank you.

  Best,

  Saami

  System - Ultrawave Labs engineer

  The board you are using is a multiplex.  If you create several virtual channels, pointing to the same physical channel, we can enjoy this channel once for each channel.  So what's happening essentially is that the physical channel was sampled once for channe 'I', then again for the channel 'Q' with a delay of a few milliseconds in between.

• Routing between two remote sites connected over the VPN site to site

  I have a problem ping between remote sites.  Now the Cryptography and no nat ACL's for different sites just to affect traffic between the remote site and main site. I tried to add roads, adding other subnets to the crypto and no. ACL Nat at the remote sites... nothing worked.  Any ideas?

  Main site:

  192.168.100.0 - call manager / phone VLAN

  192.168.1.0/24 - data VLAN

  Site 1:

  192.168.70.0/24 - phone VLAN

  192.168.4.0/24 - data VLAN

  Site 2:

  192.168.80.0/24 - phone VLAN

  192.168.3.0/24 - data VLAN

  Main router

  Expand the IP ACL5 access list
  10 permit ip 192.168.1.0 0.0.0.255 192.168.70.0 0.0.0.255
  20 ip 192.168.1.0 allow 0.0.0.255 192.168.4.0 0.0.0.255
  30 permits ip 192.168.100.0 0.0.0.255 192.168.4.0 0.0.0.255
  IP 192.168.100.0 allow 40 0.0.0.255 192.168.70.0 0.0.0.255)
  50 permit ip 10.255.255.0 0.0.0.255 192.168.70.0 0.0.0.255
  Expand the IP ACL6 access list
  10 permit ip 192.168.1.0 0.0.0.255 192.168.80.0 0.0.0.255
  20 ip 192.168.1.0 allow 0.0.0.255 192.168.3.0 0.0.0.255
  30 permits ip 192.168.100.0 0.0.0.255 192.168.3.0 0.0.0.255
  IP 192.168.100.0 allow 40 0.0.0.255 192.168.80.0 0.0.0.255

  Expand the No. - NAT IP access list
  10 deny ip 192.168.2.0 0.0.0.255 192.168.70.0 0.0.0.255
  20 deny ip 192.168.200.0 0.0.0.255 192.168.4.0 0.0.0.255
  30 deny ip 192.168.2.0 0.0.0.255 192.168.80.0 0.0.0.255
  40 deny ip 192.168.200.0 0.0.0.255 192.168.3.0 0.0.0.255
  320 ip 192.168.1.0 allow 0.0.0.255 any
  IP 192.168.100.0 allow 330 0.0.0.255 any

  Site 1:

  ACL5 extended IP access list

  IP 192.168.70.0 allow 0.0.0.255 192.168.1.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.100.0 0.0.0.255

  IP 192.168.70.0 allow 0.0.0.255 192.168.100.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.1.0 0.0.0.255

  IP 192.168.70.0 allow 0.0.0.255 10.255.255.0 0.0.0.255

  No. - NAT extended IP access list

  deny ip 192.168.70.0 0.0.0.255 192.168.1.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.100.0 0.0.0.255

  deny ip 192.168.70.0 0.0.0.255 192.168.100.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.1.0 0.0.0.255

  deny ip 192.168.70.0 0.0.0.255 10.255.255.0 0.0.0.255

  IP 192.168.70.0 allow 0.0.0.255 any

  ip licensing 192.168.4.0 0.0.0.255 any

  Site 2:

  ACL6 extended IP access list
  IP 192.168.80.0 allow 0.0.0.255 192.168.1.0 0.0.0.255
  ip licensing 192.168.3.0 0.0.0.255 192.168.100.0 0.0.0.255
  IP 192.168.80.0 allow 0.0.0.255 192.168.100.0 0.0.0.255
  ip licensing 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
  IP 192.168.80.0 allow 0.0.0.255 10.255.255.0 0.0.0.255
  No. - NAT extended IP access list
  deny ip 192.168.80.0 0.0.0.255 192.168.1.0 0.0.0.255
  deny ip 192.168.3.0 0.0.0.255 192.168.100.0 0.0.0.255
  deny ip 192.168.80.0 0.0.0.255 192.168.100.0 0.0.0.255
  deny ip 192.168.3.0 0.0.0.255 192.168.1.0 0.0.0.255
  deny ip 192.168.80.0 0.0.0.255 10.255.255.0 0.0.0.255
  IP 192.168.80.0 allow 0.0.0.255 any
  ip licensing 192.168.3.0 0.0.0.255 any

  What should I do for these two sites can ping each other?  I looked through the forums but can't seem to find someone with a similar problem, which has received a definitive answer.

  Thanks in advance!

  Hi, I assume that you need site 1 and 2 to communicate with each other via the main site right? If this is the case, then you need to set add the following lines to your ACL crypto:

  Main router

  Expand the IP ACL5 access list

  IP 192.168.80.0 allow 0.0.0.255 192.168.70.0 0.0.0.255

  IP 192.168.80.0 allow 0.0.0.255 192.168.4.0 0.0.0.255

  ip licensing 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255

  ip licensing 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255

  Expand the IP ACL6 access list

  IP 192.168.70.0 allow 0.0.0.255 192.168.80.0 0.0.0.255

  IP 192.168.70.0 allow 0.0.0.255 192.168.3.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.3.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.80.0 0.0.0.255

  Make sure you add these lines before the last permit

  Expand the No. - NAT IP access list

  deny ip 192.168.80.0 0.0.0.255 192.168.70.0 0.0.0.255

  deny ip 192.168.80.0 0.0.0.255 192.168.4.0 0.0.0.255

  deny ip 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255

  deny ip 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255

  deny ip 192.168.70.0 0.0.0.255 192.168.80.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.80.0 0.0.0.255

  deny ip 192.168.70.0 0.0.0.255 192.168.3.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.3.0 0.0.0.255

  Site 1:

  ACL5 extended IP access list

  IP 192.168.70.0 allow 0.0.0.255 192.168.80.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.80.0 0.0.0.255

  IP 192.168.70.0 allow 0.0.0.255 192.168.3.0 0.0.0.255

  ip licensing 192.168.4.0 0.0.0.255 192.168.3.0 0.0.0.255

  Make sure that these lines are added before the last permit

  No. - NAT extended IP access list

  deny ip 192.168.70.0 0.0.0.255 192.168.80.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.80.0 0.0.0.255

  deny ip 192.168.70.0 0.0.0.255 192.168.3.0 0.0.0.255

  refuse the 192.168.4.0 ip 0.0.0.255 192.168.3.0 0.0.0.255

  Site 2:

  ACL6 extended IP access list

  IP 192.168.80.0 allow 0.0.0.255 192.168.70.0 0.0.0.255

  ip licensing 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255

  IP 192.168.80.0 allow 0.0.0.255 192.168.4.0 0.0.0.255

  ip licensing 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255

  So make sure that these lines are added before the last permit

  No. - NAT extended IP access list

  deny ip 192.168.80.0 0.0.0.255 192.168.70.0 0.0.0.255

  deny ip 192.168.3.0 0.0.0.255 192.168.70.0 0.0.0.255

  deny ip 192.168.80.0 0.0.0.255 192.168.4.0 0.0.0.255

  deny ip 192.168.3.0 0.0.0.255 192.168.4.0 0.0.0.255

  So you're saying good enough your routers with these definitions which will be reached via one main remote sites (sites 1 and 2).

  I would like to know if this is what you need.

• CHOOSE BETWEEN STANDARD OR ADMINISTRATOR WHEN CONFIGURING THE ACCOUNT TYPE

  Windows recommends the introduction of standard user account Type no administrator because it is safer for the calculation of daily. I'm the only user who will never access my computer, why not choose administrator? Windows don't warn me (are you sure? Yes/No) if I try to edit or delete anything either by performing security or computer works? If not, please give an example of what could happen by choosing administrator. It's annoying to have passwords Setup and answer Yes or no jump - up when I have to.

  Thank you ~ T. Mustela

  In Windows Vista, you have the new feature called UAC, user account control. If it's on then whenever you try to do Admin tasks he will warn you though that you operate in admin account. If you want to use the administrator account, then make sure that user account control is enabled, check in the control panel in the Windows Security Center, if it is turned off it will show you.

• How to find values between two months (from January to the month prompted)?

  Hello

  I need to create a filter on the name of the month. That is to say of January of the year for the 'guest' month of guest of dashboard.

  Ex: If I ask year and month of year in 2013 and March respectively. I should get values for Jan 2013, 2013 Feb and March 2013.

  I can't try one between because that it only works on numeric values.

  I can't have a number of months in prompt because this isn't the condition and I am not allowed to.

  I tried the below query report filter

  «Sun - times» "" Fiscal month "< = (select"Dim - time". "" Fiscal month "where"Dim - time. " ("' Name of the fiscal month ' = @{PMonth}) PMonth where is the Variable of presentation" for months ".

  But it's not working

  Help, please

  Thank you

  If it is 11g then try to use the column twice.

  Thank you

  http://cool-bi.com

• How to make a route between two routers (networks) connected to the same switch?

  Hello guys, how are you?

  In my company, we have 2 internet routers more dsl router of data connected to 1 switch line

  the data row is used to connect the branches of our company together for network problems.

  the router 192.168.2.1 IP data

  internet routers IP 192.168.1.1 - 57.194.97.1

  We have 3 accesspoints wireless taking their internet of 192.168.1.1 oky guy

  what I want to do is when I connect to any wireless network to connect to the data line dsl with router 192.168.2.1

  When I use the ethernet on my pc I have IP addresses 192.168.2.222 for router data line and 192.168.1.222 for internet

  but the wireless is DHCP n that it is connected only to 192.168.1.1, which is the internet router, how can I do 192.168.1.1 192.168.2.1 when I connect

  using the wireless?

  I hope that you understand me ^_^

  Thanks in advance.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/category/w7itpro/

  Hope this information is useful.