Best way to ensure that changes to rule JavaEE take?

Similar Questions

• What is the best way to ensure that there is no virus

  Hi guys,.

  Thanks for your reply,
  I believe that my laptop has a virus or spyware. It is slow and take ages to get up. Also during the use of internet Explorer is very slow in browsing the internet.

  During the use of msn chat voice sometimes it freezes.

  What is the best way to be sure that there are no viruses.
  I already have Norton 2007 with the last update.

  Thank you

  Hello

  > What is the best way to ensure that there are no viruses?

  The best way is to use an Antivirus application and some Anti-malware and Trojan applications.
  You already use the Norton Antivirus program. It is very good. Remember that this application is always up-to-date.
  Additionally, you could install Adaware. It is freeware tool and it scans your operating system for malware.

  But the virus or malware is not always a reason for a BONE of freezing.
  Please check your processes that are run in the context of the BONE. You can also use the application called CNettoyez.
  It scans you BONES of this situation and repair the registry.

  Maybe it helps

• best way to remove all changes

  What is the best way to remove all changes that were made to an image in Camera Raw, to get the picture to the way it was originally?

  I'm surprised! I use Lightroom most of the time, and that's what the reset button. You can do this in bridge. Right-click on the image, then choose the development-> erase settings parameters. As an alternative, you can use your file system browser to delete the XMP files.

• Is there a way to ensure that closing Media Player, the file that it is play too close?

  Original title: Media Player

  Is there a way to ensure that closing the media player, the file it's play also close.  It seems that videos or music that was played last is always open and shows it in media player when it opens again.

  I've got a solution, but couldn't tell you who it is.  I found that when I tried to close the media player, he always tried to index.  I have to write protect the index files to stop the problem.

  Lost the index but works

• Best way to verify that requests to a cfc comes from a SWF, one a specific server

  Hi friends,

  What is the best way to verify that requests to a cfc comes from a SWF, one a specific server? It can be spoofed?

  A server can only check what it is * sent *, all of which is within the scope of the CGI. Most (all?) of these data can be spoofed, hence the need for firewalls that can inspect the packages more closely.

  Do a dump of the CGI scope, you see what you get. You can check the CGI. REMOTE_ADDR to get the IP address of the remote server, but you may not know the name of the page that makes the call, no.

• What is the best way to make big changes of color for items that are already selected?

  CS4 on Mac. I want to do some color changes. So many options! It is posed, for the items in question, they are already a good, saved section that describes also the colors, the new colors I want to use are recorded to the color chart. And one of the changes is a little extreme - satuaration, hue and brightness. In these circumstances, what technique of color change would try first?

  If you mark a specific point in the image and the shade with the color sampler tool, you can use the curves to match the values. Unfortunately, with a reference to singlepoint, as RGB color changes it can also change the tonal scale and local contrast and can even change color in the image. The best solution, especially if one of your samples consist of a significant change in the value is color LAB where color and tonal scale are handled in separate channels.

  

• What is the best way to catch the change event of Focus of the field on the screen.

  Hi all

  I want to trace the change event of focus field, since my setFieldChangeListener and FocusChangeListener domain for a specific use. I can't put that kind of receiver.

  I want to use fieldChaneNotify, however, it does not call at the level of the screen.

  Is there a better way to track field focus change listener?

  I tried fieldChangeNotify and moveFocus... negative screen level...

  Thank you

  Sorry not sure I understand this.

  From what I understand, your problem seems to be that your field only supports a FocusChangeListener, so you can not add another.  Extend the scope to take in charge several FocusChangeListeners and is not your problem solved?  This seems a more elegant way that attempts to manipulate a change mechanism.

• Best way to avoid any changes?

  Hello

  We have a confidential 300-page PDF, and the people here are super paranoid someone will it alter or remove the watermark "confidential."  I informed them of the "encrypt with password" feature which prevents editing, but they are uneasy about the fact that these Adobe security settings are not supported in other publishers of PDF/viewers.  They proposed to turn it into an image, but then got scared when I told him OCR.

  I think I already know the answer to this... but is there a way to make sure that no one can modify the PDF in ANY software?  If not, is the most effective password?  Or does just print and send... (they are paranoid that someone will change the watermark on it too).

  Thanks for all the ideas!

  Even if they distribute the document to someone, someone could create a fake. If they're that paranoid, it would be preferable to hire legally binding agreement with the people they distribute to. Something like an NDA.

• best way to add and change the menu all programs without turning off UAC?

  I just download HJsplit, as someone has sent me a video file into segments to overcome the limitations of attachment size. HJsplit doesn't require installation, but UAC is actually prevents me from adding it to the start menu.

  What would be the 'proper' normal procedure to add it to the menu all programs on the start menu, preferably in an existing folder, called "utility" without having to go through two reboots to turn UAC on or off?

  If there was a previous version of Windows 95 and XP, I would have included the word "shortcut" in the paragraph above.

  Essentially the same as option B in my two ways, but without the use of the command prompt to start the Explorer. I must have accidentally deleted the icon from the Windows Explorer of my account administer as I find it, but it appears in my standard account and backup my admin account.  Thank you, he let discover me the missing icon, and I fixed it.

• Forcing a file DOWNLOAD vs open a file when you click on a link... What is the best way to do it?

  Hi all

  What is the best way to ensure that when a user clicks a download link on a web page that the file is actually downloaded rather than the file open in any program can read? For my case, this includes two types of files, video files (.wmv, mainly) and .pdf files. I want my users to browse I provide for them, then they choose a link, click and the file downloads, NOT to have them play/open.

  I started researching on this last night, and the best I could come up with was the suggestion to add "& action = 3Dsave" file as a query string name. So, me being curious, I tried without success to find out whether A) the right way to do it or B) If this query string is the code appropriate to today's standards.

  I looked on the Web site of w3c.org not knowing if it was something that was of their Kingdom, but their website has been revamped and is now so cinfusing to navigate that one must become a software engineer to understand.

  Any help on this would be most appreciated. Thank you!

  Sincerely,

  wordman

  Create a file with the same name as the video/pdf file but with the extension .php. Insert the following code at the beginning (NO space before that in the file):

  <>

  Header ('Content-disposition: attachment; filename = yourfilename.xyz');

  Header ('Content-type: abc');

  ReadFile ('sourcefilename.xyz');

  ?>

  Replace with the file name to "yourfilename" above. sourceFileName may be the same. This gives you just the ability to change names.

  You can find a list of the types mime here: http://en.wikipedia.org/wiki/Mime_type

  If you know php, you have a lot of files, it would probably be easier to have all the links go on one page with the filename and mime type as parameters. You would then use the simple substitution to do the rest.

• When you install a new application, is it necessary to start from a clean boot to ensure that no application works?

  When you install a new application, is it necessary to start from a clean boot to ensure that no application works?  Somewhere, a long time ago, we advised me to always be in a boot environment when installing new applications and have always respected this notice since.  However, I recently learned that is not necessary and may even be counterproductive because some Microsoft Services are needed for new facilities.  My goal is to have no corrupted installations to avoid future problems, but I have nothing seems to give me resistance gremlin 100% and I still have my share of challenges.   Almost all applications that I install contains the warning to make sure that no application works before installing.  Can anyone tell me with authority the best way to ensure that new installations of new applications please?  In addition, the same orientation for Win XP Pro to do with Win 7 Home Premium please?  Thank you.

  YW. Yes, I think an important thing to take away is to realize that it is better to only install the necessary Windows updates 'priority '. There is one exception, apparently. Recently, an MVP made me notice that updates to certificate root (which although considered "Optional" are virtually useful updates to security for IE) must be installed as well.

  But others are optional and since then, they can be VERY problematic (especially updates of pilot and the dreaded Windows Search 4.0), you really should stay away from them!

  Happy to help to explain things. Good luck!

• What is the best way to update coming 8 Pro?

  I'm a little confused about the best way to update my V8P. The app My Dell seems to be looking for updates, but it is also linked to a page on the Dell site that checks the latest downloads for the device. The link is provided through the tile from drivers and downloads . This page of the Web site, incidentally, trying to install a program to check my V8P, but the facility apparently never works. I always get an error message that says (and I entered here exactly as it appears, the police blue and all):

  "We're sorry, we were able to scan your system. "Please return to the drivers home to return to.

  Because of the link to the site I don't know if My Dell app is all I need. The app has an area of notification, which seems to be to talk about new drivers and such available, although drivers and downloads of tiles wonder is if there is more, I might have need. Why have the drivers and downloads of tiles if the application checks and warns me on drivers and downloads?

  Bottom line, is that I'm confused. So, what is the best way to ensure that my V8P is up-to-date?

  Manually, I downloaded and installed Dell system detect. After doing this I have re-tried the system analyze the updates of the Web page and it worked. I now have a lot of updates available.

• best way to track

  I have a table that has information project inside. What is the best way to track when changes are made?
  Here is an example.
  
  

  create table testing1 (
  projectid varchar2(50),
  value1 varchar2(50),
  value_date date
  );
  insert into testing1 (projectid,value1)values ('1a2a3','12345');
  insert into testing1 (projectid,value1)values ('1a2a4','12645');
  insert into testing1 (projectid,value1)values ('1a2a5','17345');
  --select * from testing1

  every day, this table is deleted and recreated via a stored procedure, I have running.
  I would like to create a new table and a procedure that is below.
  
  If there is a change of value1, I want a new insertion to end the projectid, the new value1 and the sysdate in the column date. If there is no change, there is no insertion.
  
  
  
  any help is appreciated.
  
  I'm not looking for someone write everything to me (although it would be amazing), just looking for some ideas on how best to do it.thanks.

  http://docs.Oracle.com/CD/B28359_01/server.111/b28313/CDC.htm

• What is the best way to import and export images from the 5 d Mark II?

  Hello

  I have just finished what I plan my first masterpiece of shooting film.  Shot on the Canon 5 d (1080 p, 24 fps), and the film looks amazing.  Now, I'm ready to start editing and now use creating lately, but I still have to figure out the proper conduct.  I want to know the best way to keep the resolution before I dive into this project.

  My questions:

  (1) what is the best way to start a new project and import the images without having to make while editing, in order to keep all the resolution and the originality of the source footage?

  (2) what is the best way / codec / format to export these images even once done editing to maintain than crisp 1080 p for which the 5 d is therefore counted?

  (3) what is the best way / codec / format for import and export / rendering between the first and after effects?  I speak especially of Visual effects and color correction.  I also a few sequences of 30 images per second that I intend to slow down in AE and then import into first.

  I know that it's wide enough, but as a solo Director I really need advice from someone.  Rarely, I finished my films with the same look crispy as images.  I need help of pipeline and really appreciate it!

  > used first lately

  A list of tutorial in the #3 http://forums.adobe.com/message/2276578 message

  1 - Please NOTE that the PPro CS6 screen may be a little different (I use CS5)

  For CS5 and later versions, the easy way to ensure that your video and your project

  See 2nd post for the photo of a NEW ELEMENT of process http://forums.adobe.com/thread/872666

  - and a FAQ on setting http://forums.adobe.com/message/3804341 sequence

  2 - BluRay... but I'm not sure if 1080 p is supported (I don't use of BluRay)

  1080 p http://forums.adobe.com/thread/995191 some work, some are not

  In addition, for upcoming posts, information FAQ http://forums.adobe.com/message/4200840

  In addition, read the metadata contained in the file http://forums.adobe.com/thread/1015001?tstart=0

  And finally, read Bill Hunt on http://forums.adobe.com/thread/919388?tstart=0 installation project

• Best way to secure RIDC connection?

  Hi all
  
  I need you entered on the best way to ensure the RIDC. RIDC supports the following:
  
  1 Intradoc - use SSL Socket.
  
  2 JAX - WS. -
  
  3 HTTP - using the Apache HttpClient package. It is not like we do not have an environment that will promote the Ondaaah.
  
  I'm more interested in the what options is the best (1 or 2) and the reasons for it.
  
  Thank you
  SP

  I would say using the socket connection. The reason for this is because the AAU provides a way to set an IP filter on who is allowed to open a socket connection. So even if your firewall is open for RIDC, UCM will block all the RIDC connections if the incoming IP is not in the list of IP filters.
  That is why it is very safe, so you can add your production server to connect to your server from the Complutense University of MADRID.