Re: Can I start by USB port

Similar Questions

• Photosmart HP 6510 - can't find the USB port to connect to the computer. It is right in front of my face?

  Photosmart IHP 6510 - can't find the USB port to connect to the computer. It is right in front of my face? I can't find a diagram online. do not have wireless capability. With the help of MacPro with Snowleopard.Thanks.

  Hello

  The usb port is not #22. as seen in the picture. It's in the back of the printer on the side right hiand.

  

  Best regards

  ERICO

• I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  I can´t use the USB ports on my monitor dell 1905fp using win7. Help, please.

  Have you plugged your monitor with a USB cable to your computer?

• Qosmio F10: Edition of USB-mouse - how can I reinstal drivers USB port?

  Hello

  I am the owner of a Qosmio F10 with Win XP MCE.

  I have recently encountered problems with my USB ports I have 3 in my computer. It began with one of them and has now spread to the rest of them.

  The problem occurs especially with my mouse. The mouse freezes and sometimes I hear the alarm which is generally issued when disconnected a device. Sometimes it restarts seconds later and sometimes I have to physically unplug my mouse and plug it back in to restart.

  The problem also occurred with other devices that is my Ipod.

  The problem could be related to lack of memory because it seems to me see more during the execution of the programs such as Photoshop, Illustrator, InDesign, Flash, etc., however I can't say that for sure.

  Can I reinstal the drivers for the USB ports? I tried reinstalling my driver of mouse, with no effect.

  Please note that I cannot go into 'Control panel' I get an error message and closes the window.

  I hope someone can help me.

  Best regards

  Green tentacle

  USB drivers are part of the Windows operating system. 3rd party USB drivers don t exist!
  What you could do is to disconnect all USB devices and could remove the USB ports/hubs/controllers in Device Manager.

  Reboot the laptop.
  After restarting again the operating system should recognize and install again the USB ports.
  This accelerated procedure should help you

• I can't use my USB ports on my Satellite A30

  I tried to upgrade Windows XP Home to XP Pro on my Satellite A30, but he would not then allow me I formatted the hard drive and installed XP Pro on a drive and then installed the toshiba utilities and readers from the disc supplied. But now the laptop does not recognize my usb ports and I can't install my rinters and other prepherels. Can someone tell me please how to fix this? I have to re - install the XP Home again?

  Thanks a lot for your help in advance!

  Hello

  Have you installed Service Pack 2? What is with power supply for all your external devices? They have own adapter?

• Can not use the USB ports on my Satellite P10

  I have a laptop Toshiba Satellite P10 3 years computer that has 3 USB ports. None of them works although the power is coming from them than my external mouse upwards but lights does not work. In Device Manager it says that everything is working ok IE all the drivers, etc. I was told that it's probably the motherboard?

  Maplins it's a software problem. I tried a PCI card with USB port but they no longer work. The PCI location is fine but as my wireless adapter card works from there ok. I restored the computer 3 times and each time the USB ports do not work.
  Any suggestions? I want to add an external mouse drive DVD etc...

  Any help appreciated... Mark

  Hello

  Did you use the clean Toshiba Recovery CD to restore the operating system on your laptop or have you installed the operating system from the original Windows CD.
  I advise to use the Toshiba Recovery CD because all the driver and patches installed on this CD.

  The USB ports provide a current of 500 ma, and it is a standard. If several external devices connected to ports needs more power as 500mA, then it of possible that the laptop does not detect USB devices several.

  In Device Manager, you may turn off the power save the unique option to the USB ports.
  You can do this in the properties of the USB port

  Additional I advise to use a USB hub with external power clean.
  These devices are not very expensive and will allow you to connect and use several devices together.

• Can I add additional USB ports?

  We just bought a pack of PC HP Pavilion p7 1036b.  There is simply not enough USB ports.  Can we add additional ports?

  Hello

  Yes you can, you can buy a USB hub called device such as this. They are many around.

  http://www.pccasegear.com/index.php?Main_Page=product_info&products_id=18565

  (You can buy USB3 now for futuer usage)

  Kind regards.

• How can I get my USB ports working again?

  I recently replaced the Windows 8 operating system on my HP Envy dv6 Notebook PC with Windows 7 64-bit operating system. Now, it seems that one of my four USB ports and I have not been able to find a solution to my problem online. I'm simply lack of drivers or I seriously mess up something with the change of operating system?

  Hello

  There are multiple matches found for "HP Envy dv6 Notebook PC"

  I suggest that you will find what is the exact model of your machine number and try to find drivers 64-bit of Windows 7 for this HP site, if they are available.

  http://WWW8.HP.com/us/en/support-search.HTML?tab=1#! = & qryterm = HP Envy dv6 Notebook PC & search_searchtype = s - 002

  If not available, reinstall windows 8.

  See you soon.

• How can I use the USB ports in Windows XP Mode?

  Windows XP mode

  I need to use the USB port, but are not available in Windows XP mode, how do they available?

  Thanks, I need an answer soon.

  Plug the USB device, click the USB menu

  Click Attach device.

  Please wait while this one is initialized.

• How can I fix the USB ports on work for Vista?

  I have Windows Vista basic and USB does not work for all devices when they are plugged in. I get the message "devices connected to the computer USB has malfuctioned and Windows does not. "I also noticed that in the pilot do message"No driver for this device"Port_ #001.Hub_0007 ' if plug all devices including a USB key or a mouse, goed by single power. Any ideas how hard to pull of this problem.  Thanks in advance

  You can try to go to Device Manager and uninstall all the drivers remove all listed (only the hubs and not others) cos of your terminal and restart your computer. After restarting plug your rear hub.

• Equium A60: is it possible to boot from the USB port?

  Hello

  I have an EQUIUM A60 with BIOS Version 1.90 is possible for a start of the USB port using an instead of a floppy mass storage device if yes how?

  Hello

  You can boot from the USB ports with a floppy drive floppy drive. You cannot boot from USB HDD or USB
  Boot devices: HDD, ODD, LAN, USB - FDD

• Cannot get the USB port to work after re-installation of SP2 on Satellite Pro L20

  After re - install XP Home SP2 and download all updates & drivers from here, I can't get my USB port works correctly, if I have more than one connected device it says "bandwidth exceeded".

  I have a Behringer BCD2000 which is a souncard/midi controller for DJ, mixer, he has worked before I reinstalled windows, now that it snaps and POPs playing tunes, ASIO does not work when I start Traktor (Dj software) and the program crashes. Any other external sound card does not work. I've been through the Device Manager, no conflicts outside! during the series under the devices hidden.

  I am lost, my only option, buying a card PCMCIA sound card, it worked fine before as surely as it is a software solution for this?

  If anyone can help I would be very grateful.

  And what model of laptop you have exactly? As far as I know Toshiba has produced many different Satellites in the last ten years.

• USB ports don't automatically recognize my external hard drive

  And I can't find a way to recognize either manually.

  I rebooted, I checked the Device Manager, rinse it and repetition.

  Any help would be greatly appreciated.

  Don't know if it's important but... the HDD is a 1 TB of cavalry.

  T.K.

  Hi Tony Knuckles.

  Thanks for posting your request on the Microsoft answers Site.

  To check, the external hard drive work successfully before? Please also relay if there is an error message when you try to access the external drive.

   
  If the external hard drive not detected below are some steps to solve the problem:
   
  You can check if the device is compatible with Windows Vista by visiting the Windows Vista Compatibility Center, which includes a list of drivers, hardware and applications that are compatible with Windows Vista.
   
  For reference, the link to the Windows Vista Compatibility Center is included below:
  http://www.Microsoft.com/Windows/compatibility/
   
  Then, if the external hard drive is not detected in Device Manager, please check if the external drive is detected in the management of the computer:
   
  You can check this by going to: start then click on computer
  When it is connected and switched on, the drive should appear as a drive letter on the computer (ie: drive E:, F: or another letter.) An Autorun window may also appear if the drive is detected.
   
  If the external drive does not appear, please check the following:

  · Check the power supply and check if it works normally.
  · Check the wiring and check that the USB cable is plugged into a port. You can also try another USB port.
  · Check disk management to see if the drive is detected it:
   
  1. right click on computer, select manage, select disk management.
  2. check the upper and lower windows to find if the drive is detected.
   
  If the external hard drive is not detected, try to connect the external drive to another PC to check if the unit is working normally.
   
  Then please check if Windows Vista Service Pack 1 is installed currently.  If WVSP1 is not installed, you can try to install this service pack and check if the problem still persists.
   
  For reference, the link below contains information. about how to obtain the latest Windows Vista service pack:
  http://support.Microsoft.com/kb/935791/
   
   
  The relay please status after the above steps so that we will offer any additional assistance.
  
   

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• USB port recognizes the devices once they work momentarily.

  I have a zune and it has worked well for over a year. Suddenly the usb drivers only recognize the device for about a minute and losing the device when I try to sync saying that it can not recognize the device. How can I get the usb ports to read normally?

  Hello

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------

  Then lets refresh the USB stack

  Control Panel right CLICK on EVERYTHING - Serial USB controllers - device configuration-manager and
  UNINSTALL all but the category itself - REBOOT - it refreshes the drive and battery USB

  This KB shows XP how to and the method of Vista is identical
  http://support.Microsoft.com/kb/310575

  This is a utility to help you, but do 1 above.

  USBDeview is a small utility that lists all USB devices currently connected to your computer.
  as well as all USB devices that you previously used. Run Options and tick the three 1st choice
  to see if one is there. Try to remove all instances and restart then plug the drive.
  http://www.NirSoft.NET/utils/usb_devices_view.html

  ----------------------------------------------

  If necessary try these two:

  Tips for solving problems of USB devices - and a Mr Fixit
  http://windowshelp.Microsoft.com/Windows/en-us/help/c39bd203-f729-47a4-8351-83291e13c8a81033.mspx#EGB

  Hardware devices not detected or not working - Mr. Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• USB ports not recognized anymore

  I have Vista.  USB ports and ports that accept cards camera no longer recognize them.  Scanner can be moved from USB port to the USB port and works but "Explorer" does not show that they exist.  How to recognize camera cards (mainly) as they did before?  Windows offers device (camera card) has a problem, but this isn't the case.  Card works so executed through camera (USB cable to the USB port) in two different cases with two different cameras.  Also plugged on the USP port scanner is not recognized by the function 'Explorer' but actually works very well.

  Hello ghpots,

  ·         What happens when connect cards camera on USB ports, it installs the device drivers?

  ·         What are the changes that you made to your computer, since it has stopped working.

  When you connect your devices to the USB ports, check the status of the device in the Device Manager. Check if you see a yellow fringe or exclamations in the Device Manager.

  I suggest that you remove and then reinstall all USB controllers.

  To remove and reinstall all USB controllers, follow these steps:

  1. click on start, type Device Manager and open the Device Manager.

  2 right-click every device under the Bus USB controllers node and then click on uninstall to remove them one at a time.

  3. restart the computer and reinstall the USB controllers.

  Plug in the removable USB storage device and test to make sure that the problem is solved.

  Check the Device Manager to see if the unit under section USB or other devices. To do this, follow the procedures below:

  Method 1:

  1. click on Start, right click computerand select Properties .

  2. click on Device Manager.

  3. click on the (+) sign next to Universal Serial Bus controllers and next to the peripheral plus other section.

  Look for the USB device under the Universal Serial Bus controllers, or under the other devices section.

  4. If the unit is under Bus USB controllers or other devices, click on the reference to the 'unknown' device name, and then click Uninstall to remove the device.

  5. close Device Manager, and then restart the computer.

  6. If the USB device that has problems with software and it has not already been installed, install the software, now follow the planned manufacturer of the directives.

  7 reconnect the USB device that had issues and test to see if it works.

  The unit should now work correctly. Continue if the device name is not found in the Device Manager.

  Method 2: There may be a problem with the USB port. Try connecting to a different USB port. If the USB device is displayed in Device Manager after plugging the cable in a different port, then uninstall and reinstall the software of USB device driver.

  Method 3: Check the manufacturer of the device for support if the device is still unable to display.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.