best way to load 'Action Essentials'

Similar Questions

• Envy 13: Want to Best Way to load HP

  I want my battery life to be at his best and was wondeing which would be the appropriate way to recharge my phone. I had previously used a different HP laptop and since I used to always plug the charger even when the load is complete, the battery soon become damaged. SO, what is the best way to load this laptop? should I always stop and load it? or is it ok to load even when I use it? Y at - there no point of comparison as to what level I charge the battery and then plug it off, as 80%?
  Please claify and suggest the best way to charge the phone.

  Hi @atab6,

  Welcome to the HP Forums!

  I understand you want to maintain the good condition of your battery. I would like to help.

  You can consult this document: HP - understanding Lithium-Ion notebook computers and smart battery technology

  Thank you for being a part of the community of HP. Please let me know if that helps solve the problem by marking this message as "accept as a Solution. If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• Best way to load separate components of the main sequence

  When loading my flash animation, it takes time to display the loading image because he's too busy to export items on the first image. What is the best way to avoid this, while being able to use the components via the .swf?
  
  Thanks for any help,
  ~ Oni.

  OniLink wrote:
  > Loading my flash animation, it takes time to display the loading image
  > because it is too busy to export the items on the first image. What is the
  > best way to avoid this, while being able to use the components through
  > the .swf?
  >
  > Thanks for any help,
  > ~ Oni.
  >
  loadMovie ("component.swf", _container);

  the best way is to load on the outside, but if you do not receive it, check
  www.gotoandlearn.com...
  they have the best basic and advanced tutorials.

• Best way to load but game not automatically an instance of movieclip?

  Hello

  I use CC lead to produce an HTML5 Canvas project that uses symbols with embedded animations. My main scenario one frame containing the animated symbols.

  I wish that the symbols load but NOT immediately start their timeline. Is there a way to put in place a symbol with animation, so that the animation starts immediately but waits for a command?

  
  

  Or, is it an event generated that I listen to, when a symbol is fully charged and ready to start?

  
  

  For example, I have an instance of a symbol named 'Planet10' and I would stop this movieclip play until it is said to do, rather than starting as soon as it is loaded.
  

  I've been hacking at it for a few hours now and my teacher of first year since some time there wouldn't be happy... his reign was that if you get stuck after 5 minutes, you waited too long to ask for help. :-)

  -Pete

  JavaScript variables are typed, but they are not statically typed. Declare a variable with no value initializes type not defined (non-null). Within a value Boolean comparison, undefined is converted to False. It's all documented behavior of the language, there is nothing to bet on. Advise beginners to the language to use ropes to semantically store Boolean data are simply false. It leads to the kind of code that can be found on thedailywtf.com.

  In addition, a quick overview of the scope of variables how works in canvas:

  • myVar = 1; variable is accessible everywhere in the current page (global scope)
  • this.myVar = 1; variable is accessible in all the images of the current clip
  • var myVar = 1; variable is accessible in the current context only

  So, this is what works:

  If (! this.didstop) {}

  This.didstop = true;

  This.Stop ();

  }

• What is the best way to load multiple playlists on a V1 8 GB Fuze?

  I have a version of 1, 8 GB Sansa Fuze firmware I want to load some previously created on .m3u playlists.  I can't get this to work.  If I managed to get all the music of such playlists on the player, I'm unable to play through a playlist - they are right on the player as individual tracks, without organisation of playlist.

  Can someone give a step by step how to do what worked for them?

  Thank you!

  Create playlists with Winamp & MSC mode

• best way to flash to the structure of the site... classes? XML? layer actions?

  I'm doing a website.  The Web site will have several components:

  • a preloader, which will host while content is loading.
  • an external browser, full intro slideshow swf that will work until it is clicked on a menu item and will work again when the user clicks a button 'House' in the main menu.
  • a main menu, which will be accordion style and using some fades of tweenlite/greensock etc..
    
  • several external swf that is loaded based on the user's selection in the main menu.  This will be the "pages" which have different slideshows, text etc..

  
  I learned how to do all of these things since the timeline and with a layer of actionscripts.  Should I be coding this in a document and through xml class?  Is it possible, with the knowledge that I have to do all these components on the line time and an actions layer, to make it more efficient and less load time if I do via a document class / xml?  Can anyone recommend the best way to organize a flash like this site?  I read that the sites should be done through classes with xml and coding not only on the first frame of the timeline; However, I'm not sure what kind of site, it seems to be.  This is a site for a small architecture firm, which will be river photos of the projects, descriptions, etc.

  Any ideas?

  Thank you.

  You use classes to organize your code - and so you can reuse code more easily and you can be as granular as you want - or you can paste all code into a single document class... that would really be better than putting in the timeline... Finally unless you write your code in an external editor like FlashDevelop, which is loads better than writing code in Flash.  You use XML if you need to read some data... whatever it is and want / need to be editable outside of Flash. But you could also just use a database and PHP. It's really a matter of what you are comfortable with. Using external coding and classes are all simply better in every way with a script code... so I'd say just take the leap and learn to do it "right".

• What is the best way to save an array of objects and then load it?

  Hi, what is the best way to save and load an array of objects?

  I hade a code like that, but it does not work:

  var test = new Array();
  test.push(new Foo("a"));
  for (var i = 0; i < test.length; i++) {
      console.log(test[i]);
  }
  // save and load, then show again
  localStorage.setItem("test", test);
  var test2 = localStorage("test");
  for (var i = 0; i < test2.length; i++) {
      console.log(test2[i]);
  }
  

  the problem is, the first newspaper that get the things I want. The second time I get:

  Uncaught TypeError: Property 'localStorage' of object [object Object] is not a function
  

  The work around this problem is to stringify before saving and then analyze before loading.

  http://StackOverflow.com/a/2010948/773263

  Although I said, it is better to use IndexDB.

• Best Way to hook 8,53 PT / wait for PeopleSoft Ajax grid to load?

  Hello

  I'm looking to improve our tools of 8.49 to 8.53

  We have little javascript which reads and modifies the data in the html grid once the page is loaded in 8.49. Any grid / grid page navigation would, of course, a trip to the server and javascript code would be just re - run on the page.

  8.54 Grids are transferred via AJAX - so that the page will load everything first, then the grid is loaded after... so any modification of the grid, I suppose, will no longer cause a page refresh.

  My question is - can anyone suggest the best way to hang on in the grid of Peoplesoft and call code javascript after the grid has loaded and whenever the change in the data grid (IE view another page of the grid)?

  I have the same problem with pagelets too, but guess that the grid would be similar to pagelets.

  Thank you

  Kane

  The benefits of user experience of 8.54 are great. One of the problems I had with Ajax and JavaScript, however, is exactly what you mention:'re missing us this trigger that identifies the data and the loading of the page changes. The solution that I use is to override the net. ContentLoader and net2. The ContentLoader object methods. I save a pointer to the old version and reset to use my version. All PeopleSoft Ajax calls work through these methods. Prior to 8.54 I must add my code to any supplied HTML definition. From 8.54, you can create your own definition of JavaScript that contains the version of your"punch Monkeypatched/duck" of net2. ContentLoader then add it globally or to a specific aid of the new component branding options in 8.54. I refer to this technique in a few blog posts and comments on my blog. The most glaring example, however, probably is in this post: Jim's PeopleSoft Journal: Monkey Patching PeopleSoft.

• Best way to save and load the MovieClips in As3?

  Hello I am trying to understand the best way to record multiple clips when the application closes and load them when the application opens? PLZ!

  Physically, you can't add content in a swf file that you go back and find what you have created still exists.  You need to store information related to these new content in external storage (cookie, database, xml file, etc.) and then use that information to reconstruct this content when you reopen the file.

• What is the best way to call a method in the bean on the adf page loading?

  Hello
  
  which is the best way to call a method in managing the beans on the adf page loading.
  
  My version of jdev 11.1.1.5.0
  
  Thank you

  I don't know if it's the right answer for your question try this...

  In taskflow for properties of method call, you must return a value when you use #{pageFlowScope.returnvalue} (returnvalue is a variable), so you can use your return value in the taskflow... Please let me if this is correct...

• Satellite M30: best way to connect to STEREO to listen to music

  What is the best way to export the music to an external stereo installation (by which the port or the connection output device)? Do I need devices additional periferal?

  Hello

  I use the small audio adapter like this one http://www.audiogear.com/cgi-bin/shopper.cgi?key=Adpt2Rf-Mnsp&preadd=action. The HIfI has generally to THE free line. This line, you can use to listen to music.

  It's also nice when I play games. I like it a lot.

  Good bye

• Satellite U405 - what is the best way to battery life increases

  Hello world!

  I searched for it a little and everything I could find are contradictory answers and some confusing instructions... :)
  Even the PDF for my U405 has some conflicting advice (it is recommended to completely discharge or not?)

  I'm trying not to remove it and store it with a charge of 40% in a situation of low temperature (?) because I also trust him as a UPS (power cuts are common to sleep).

  So, in short, what is the best way to prolong my life from the battery to its maximum? Should I fully discharge once a month or only to half way through? Should he ever be completely loaded, or which is actually a good thing?

  Thanks in advance for any wisdom that anyone can offer on that!

  David

  The best way would be to put it out of the laptop, but you already said, you don't do that.
  So I say to completely discharge the battery from time to time and load it to the maximum.

  That's all I can tell you right now, but don't know how much it will increase the battery life.

• Satellite A200 - 1 M 5: what is the best way to extend our battery

  Hi there everyone,

  I hope you are all good, I kindly need to know what is the best way by which we can extend the battery from our PC, I had a friend who apparently frustrated because his laptop battery is almost dead then that PC disconnected electricity; It gives him only five minutes and the beep starts.

  I think she always used his laptop plugged into the electricity, not frequent unloading / loading the battery and yet, I really appreciate it if you guys out there (blessed) could help me maintain my and his of (she bought a new battery lol) batteries.

  Note: My Satellite A200 - 1 M 5 gives me 2.45 minutes after 4 months and I'm happy with that, I turn on my laptop disconnected to power (releases) often, but I feel that I can't explain or help others to look after your laptop battery.
  Thanks a million in advance

  Why we can not find the information seen on the Toshiba site maintenance?
  Maybe we didn't get!

  Hello

  I think you're right research you didn t on the Toshiba page quite long ;)

  I have consulted the European Toshiba support page and selected in the troubleshooting category option-> Solutions to common problems.

  There I found the battery category, and then I found this article:

  * + How to configure my computer for optimal use of battery? + *
  http://www.toshiba-tro.de/KB0/HTD5400Z60005R01.htm

  It looks like an old FAQ document in any case the fact is that all batteries lose own performance after several times several years ago, it is advisable to remove the battery from the laptop to extend the battery life. This is not necessary with the new battery and generation of laptops.

  However, many people remove the battery if the laptop works on sector (power adapter connected) This prevents the battery of standing of the charge and discharge.

• Best way to send signals between the two screws

  Hi all

  I have two screws that generate some complicated signals (sine wave, pulse, etc.). The other one takes manually entered the tension and pressure send to certain material with a pump and reads the output of the pump.

  

  What is the best way to send the waveform of the signal VI the VI hands-on? I still need to be able to control the signals manually in this manual control VI.

  Thank you.

  Your user interface would handle this. If you use a machine to States (hint-hint) you would simply chose the State appropriate for your current configuration. You would provide a mechanism (UI, configuration file, argument of command line to name a few) for the parameter which mode to use, and the application would have chosen the appropriate action.

• Programmatically update nested arrays of Clusters? (What is the best way?)

  I have an array of configuration files that is loaded at startup. Then, I need to update the values in this table of configuration values. The attached VI works, but I was wondering if this is the best way. It seems not scalable I added elements that I do need to update (mostly because the real configuration file has a lot more items).

  What is the best way to update an element of tables nested clusters?

  In this version shortened:

  When I click on "Set a new value" it should set the updated for the selected Config values #, # test, a subtest #.

  

  Back panel:

  

  Thank you!

  A better approach is to use the standard bundle/unbundle and the subset model table index table/replace. A component of Inplace Structure using simplified, as shown: