Best way to load separate components of the main sequence

Similar Questions

• Envy 13: Want to Best Way to load HP

  I want my battery life to be at his best and was wondeing which would be the appropriate way to recharge my phone. I had previously used a different HP laptop and since I used to always plug the charger even when the load is complete, the battery soon become damaged. SO, what is the best way to load this laptop? should I always stop and load it? or is it ok to load even when I use it? Y at - there no point of comparison as to what level I charge the battery and then plug it off, as 80%?
  Please claify and suggest the best way to charge the phone.

  Hi @atab6,

  Welcome to the HP Forums!

  I understand you want to maintain the good condition of your battery. I would like to help.

  You can consult this document: HP - understanding Lithium-Ion notebook computers and smart battery technology

  Thank you for being a part of the community of HP. Please let me know if that helps solve the problem by marking this message as "accept as a Solution. If you need more assistance let me know and I will gladly do whatever I can to help. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me congratulations.

  Kind regards

• best way to load 'Action Essentials'

  A little new with the help of Macs... need to know the BEST way to load the Action Essentials?

  Action essentials are just images so just put in the folder and import it into the project that you want to use it in. Nothing to install or load.

• Which is the best way for a function called identify the class name of the appellant.

  Which is the best way for a function called identify the class name of the appellant.
  
  (1) sun.reflect.Reflection using the function call
  

                  Class caller = Reflection.getCallerClass(2);
                  System.out.println("Caller Class Name ::"+caller.getName());

  Trace of function called battery 2) analysis of current threads

                  StackTraceElement[] stElements=Thread.currentThread().getStackTrace();
                  System.out.println("Caller Class Name ::"+stElements[3].getClassName());

  Y at - it all the other ways to achieve the same. What is the best way?
  Called function does accept no argument, I don't want the arguments of function calling function called t.
  
  Help, please.
  
  With greetings
  Paul

  798185 wrote:
  Which is the best way for a function called identify the class name of the appellant.

  Y at - it all the other ways to achieve the same.

  SecurityManager

      // 0 is the anonymous SecurityManager class
      // 1 is this class (also works in static context)
      // 2 is calling class
      static Class getClass(int i) {
          return new SecurityManager() {
              protected Class[] getClassContext() {
                  return super.getClassContext();
              }
          }.getClassContext();} 
  

• Transfer data from DoPreUUT to the main sequence

  Hi all, I am working on editing a sequential model existing in NI TestStand.

  In PreUUT do that I just wanted to have mu, own VI Custom which will require a path and once the path is selected, the VI will extract 2D Array of string values that I have to move my hand Sequence.I am facing a question of transfer data from table 2D-doPreUUT to mu from the main sequence.

  http://forums.NI.com/T5/NI-TestStand/pass-parameters-from-PreUUT-to-main-SEQ/m-p/2850684#

  who says the best way is to use the globals file, but I'm not able to get my values transferred to my main sequence.

  Need help to solve...

  Thanks in advance

  If you are adding a FileGlobal to Test DUT and expecting to access this variable in your file of the client's sequence, you will not be able to read the FileGlobal directly. You will need to use the "RunState.Root.FileGlobals" string... »

  for example if you have an array of strings FileGlobals.MyDataPaths you MainSequence, you can access using RunState.Root.FileGlobals.MyDataPaths of MyDataPaths.

  Remember that this will only be available when you use the process model, therefore, it would be wise to test that you run with the process template.

  Hope this helps

• Go to the list of the results of the main sequence in my plugin...

  Hi guys,.

  OK, first post here, but I'm a little stuck. I am writing a plugin model to generate a custom HTML report (my requirement has a very specific layout for the report, which is not at all compatible with the html reports generated by teststand normally). Anyway. I generated all labview code, I want to make the report in the format I need, but I'm really bad at actually get information of teststand in a way that is easier.

  What I want to do is browse through the list of the results of the main sequence in the callback sequence DUT-Done of the sequence of pluging, which is stored in

  Parameters.MainSequenceResult.TS.SequenceCall.ResultList according to the documentation, but how can I really access it as a table I can go? All I have in my list of parameter is a reference to the parameters. MainSequenceResult, and for the life of me I can't work out what to call this knowledge actually just get it into a format that I can then use to browse in a loop "foreach" to get out of these settings.

  I'm on a windows machine and teststand 2014 7.

  Any help you could give would be really appreciated!

  J

  The list of top level result is: Parameters.MainSequenceResult.TS.SequenceCall.ResultList

  To find it, I dragged Parameters.MainSequenceResult in the Watch window to a breakpoint and developed it until I found the list of results.

  The ResultList is a PropertyObject which is an array of containers, so as the methods GetPropertyObjectByOffset and GetNumElements are going to work on that.

• How can I include results of a subsequence, which takes place in a new thread in the test report from the main sequence

  Hello!

  I have ", working with the Version 4.2.1 of TestStand. I have a main sequence, which sous-séquences of different calkls. All these steps are reported correctly. One of the subsequences works like "new thread". How can I include his results in the common test report of the main sequence?

  I have variable markes of the subsequence as is required for the test report (it works OK if it's not a new thread). If the digital test, which is performed in this subsequence is correct, I get no results at all. If the digital test could not get a "message in red" who whithout having failed to test any reference to step somewhere in the report of the main sequence or values of vaiables that were not correct.

  I tried an option 'on the fly' in the Configuration of the report, but n ' got no useful result. What should I do?

  Best regards

  Hello Pericles,

  You can use a queue time for the results of the wire once it ends. Place a waiting time after the call to the thread in your MainSequence at the location where you want the results to add to the report (compared to other results). In the waiting step Setup tab, select wait: Thread the threaded sequence, and then select call to specify sequence call the radio button. You can also use an object reference if you need results if poster somewhere where elsewhere - you would just add an object reference to the appeal of sequence threaded in its thread settings dialog box.

  I hope this helps.

  -Jack

• Add Label (and other things like SequenceCall, statement etc.) on the main sequence?

  Hi all

  I try to add the label on the main sequence, but the problem is how to run there. Have been made successfully subsequences and their content, but I now want to add content in the main sequence (labels, SequenceCall, statement etc.). You can someone help me with this code? (CVI/LabWidows). This code seeks to add labels (szName) on the main sequence.

  Before entering the Label, have referred to the hand in the file in the sequence. The missing part.

  tsErrChkMsgPopup (TS_EngineGetSeqFileEx (EngineHandle, & errorInfo, SeqTemplate_path,  TS_GetSeqFile_DoNotRunLoadCallback, TS_ConflictHandler_Prompt, & SequenceFileHandle));
  
            tsErrChkMsgPopup (TS_EngineNewStep (EngineHandle, & errorInfo, '',' Label', & labelStep));
  
  							tsErrChkMsgPopup (TS_StepSetName (labelStep, & errorInfo, szName));
  
  							error = TS_SequenceInsertStep (SequenceFileHandle, & errorInfo, labelStep, indexL, TS_StepGroup_Main);

  I tried with TS_SeqContextGetMain(), but does not work.

  Best regards

  branar

  Hi Ray,

  reason why is used SecuenceFileHandle was I have change the existing file (only not by creating a new). Simply, add subsequences of default file and save as a different name. Problem is now solved by

  TS_SeqFileGetSequenceByName (SequenceFileHandle, NULL, 'MainSequence', & SequenceHandle)

  I get "MainSequence" and adding animals here. Previously, MainSequence has been created and two sequences with the same name were existi.

  Best regards

  branara

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Note the serial number of the UUT in the main sequence

  Hello

  I want to write the serial number of the object to be measured on the main sequence.

  I know that I can access this value through RunState.Root.Locals.UUT.SerialNumber. I can write the serial number in this variable and it works as long as the report is not generated on the fly. If activate on the fly to have pointed out, my serial number of UUT report rest to 'NONE '.

  Is it possible to force the regeneration of the report with the last value of variables? I noticed that there's something similar for the runtime. During the execution of the sequence, on-the-fly feature enabled, the report indicates "0 seconds" for the period of performance. However, when execution is complete, this report field is updated with the actual value.

  How to do the same for the serial number?

  Thank you

  Alex

  OK, ATML seems to create the problem. Using XML reports, it works as expected. What is a work around for you?

  Norbert

  EDIT: Classified CAR 491296 against ATML OTF reporting

• What is the best way to call a method in the bean on the adf page loading?

  Hello
  
  which is the best way to call a method in managing the beans on the adf page loading.
  
  My version of jdev 11.1.1.5.0
  
  Thank you

  I don't know if it's the right answer for your question try this...

  In taskflow for properties of method call, you must return a value when you use #{pageFlowScope.returnvalue} (returnvalue is a variable), so you can use your return value in the taskflow... Please let me if this is correct...

• Best way to transfer a subset of the catalogue with files sidecar from one computer to another?

  I'm recently sent to me to take pictures in Costa Rica as part of my work but had to bring my own laptop because it is not suited to my workplace. While that on the road, every night I loaded the photos I had taken this day here on my computer and often started to change. Now, I'm back at home and want to move all photos of travel as well as all files XMP sidecar from my laptop to my desktop computer at the office. What is the best way to do it? I don't want to transfer all the photos on my laptop (pictures of my children, for example), and I don't want to lose the changes that I've already done everything outside the office.

  Please notify.

  Select the pictures you want to copy and then export as catalog including pictures on an external drive. Then, on your desktop, you import catalog.

  A simple google search will be several links to articles and tutorials on how to do it.

• What is the best way to place an alias of the Recycle Bin on my desktop?

  Application of small trivial customization here.  Using OS X 10.11.4, what is the best way to create a trash can on the desktop?  I already tried the Terminal command to place the alias, but I'm unable to change the icon.  Given that I have with this method, how to change the folder icon image so that it represents a trash can?  I would find it useful enough to be honest.

  Thanks in advance.

  You can try to drag /System/Library/CoreServices/CoreTypes/Contents/Resources/TrashIcon.icns into the window read the information for the Alias. Upper left corner.

• HP Pavilion Notebook e101sp 17: best way to charge 10 Windows with the laptop HP software (post regularly update 8.1-> 10)

  My HP Pavilion 17 - e101sp Notebook PC (ENERGY STAR) came with preinstalled Windows 8.1. I later upgraded to Windows 10.

  Although I had Norton Internet Security installed since the bootups earlier, I still have some virus infections from time to time (discovered through runnin ClamAV from a Linux Debian partition, I put in place on the same computer) laptop. After the expiration of the 1 year subscription NIS (I had lost confidence in it right here...) I played around with a few other sollutions.

  In the end, I now have a Windows essentially not fixable (infected) 10. It's not scary for me because Linux is my main OS 'at home' for 15 years now. However, being the standard Windows "de facto" is it much, I still would like to have a copy of own work, installed.

  My question is, in the current scenario, as I mentioned, which of the two is the best way to have 10 Windows installed with all the goodies of HP, alongisde, my Debian Linux system? And what care I would create throughout the process?

  1 reinstall 8.1 can I leave HP recovery disks that I made at the beginning (and hope that does not erase the Linux partitions, I created afterwards - I need more than "hope" in fact, I need evidence-based knowledge on this one!). And then upgrade to Windows 10.

  2 install a Windows 10 fees (from DVD created from the .iso file downloaded from Microsoft), hoping that it activates properly with the key contained in the UEFI BIOS (I think that this 'hope' is pretty much made to knowledge database) and then get all the goodies of HP... by a simple download from the HP site?

  I think option 2 is the safest (and fastest also!) but I'd well informed comment before that I have try.

  Thanks in advance.

  Hello:

  Option 1 is the only way you will get to keep the programs provided HP with your PC, and they reformat the hard drive, so you will lose everything.

  Option 2 will put a clean install of W10 on your C:\Drive and you will be able to leave everything intact, unless you format the hard drive.

  If your current installation of W10 has been successfully activated, W10 will automatically activate once you install it again once you're connected to the internet.

  To install W10 in this way, you select the "I don't have a product key option,' when you get to when Windows asks for the prouduct key.

  The only software and you will be able to install the drivers which will be available on the page of the driver and support for your laptop.

• Best way to display a report of the hierarchy tree to APEX 4.2

  I have a hierarchical query spans four levels over two tables.  The application works very well and also includes columns hierarchical sum (i.e. the parent displays the sum of all children) using functions.

  I wonder what is the best way to view these data for users?

  At the moment I think I would have a collection now my connection with the edition special 'show' column.  Then I would include HTML to define values correct show/hide and refresh the report when you click on a node.  In my view, this would probably work, but may not be the best way.

  I disassembled my request for necessary columns (no column of the sum) and the tree APEX regions work well for this.  Y at - it a plugin alternative jquery or anything that people with what will give me the directory structure 4.2 native while allowing me to display additional columns with links?

  If I need to provide more info let me know!

  LSDev wrote:

  I'm going to use today to test these ideas, and if they don't work I'll go with the classic report hack, I thought.

  AEC: I'll try the plugin and report back on the question if I can get the links to work.

  The plugin code is clear and simple. However, the links generated HTML text in the query as:

  ...
  '' || apex_escape.html(ename) || '' employee
  ...
  

  does not work out of the box as the plug-in is escaping in HTML output column values:

      -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
        sys.htp.p('' || sys.htf.escape_sc(l_value_list(j)(i)) || '');
      END LOOP;
  

  This can be changed to allow the links:

    -- Render all other columns
      FOR j IN 3 .. l_value_list.count
      LOOP
       IF l_value_list(j)(i) not like '' || l_value_list(j)(i) || '');
      END LOOP;