Satellite M30: best way to connect to STEREO to listen to music

Similar Questions

• Best way to connect my computer to computer outside

  What is the best way to connect to my server from 14 Filemaker from an outside computer.  Both computers to run OS10.11.  Team Viewer is the only way I just need to do one or two weeks a year, in order to access the program.

  You can use any service remote desktop, such as VNC, Apple Remote Desktop, etc.

• What is the best way to connect the pipes to Labview? DDE or OPC

  What is the best way to connect quizix pipes to labview?

  Pipes share data by using Dynamic Data Exchange (DDE), which is the best way? To use an OPC server between labveiw and pipes or DDE?

  If the program manages DDE communication the best way is via a DDE, as LabVIEW handles this. Otherwise, you will need to add another instance (OPC Server) system that will make it more complex and causes more load.

  See the previous link to the words 'to the help of LabVIEW as a DDE Client'.

  -Tom

• best way to connect two PC 2748 s?

  I just upgraded our office in two PC 2748 s (while still also using one of our PC 2324 devices) and I would like to know the best way to connect these three switches.

  At the present time, I have a cord Ethernet connecting each of the 2748 s via the 49 port and then another cord ethernet connecting the 2324 to the 50 of my first 2748 port (which has our main file server and the outgoing Internet connection on it, among other things).

  Should I also connect the 2324 to SECOND 2748 or is asking for disaster? Also, is there an advantage to invest in GBIC modules for the two 2748 s so that I can connect this way or this advantage of flow occurs only when connecting a 2748 to another device (i.e. There is no speed advantage when only connecting two 2748 s together)?

  Thanks in advance for your clarification...

  
  

• Satellite M30-106 - does not connect via radio

  Hello
  hope someone can help im having headache with my Satellite M30-106 problems

  I can connect to the internet via ethernet, but once I delete it does not connect via radio. I am trying to connect to a router broadband Sagem sky but for some reason any he just not going, when I open wireless connections, I can see the projection of router as safe but just cannot connect.

  I would also like to point out I am very new on wireless and to be honest, I don't know what im doing please give me advice in simplistic terms you can so I can be sure I understand where im going wrong

  Regards wayne

  Hello

  If you try to connect to your router, you will ask for a password or what exactly is going on?

  Maybe you should try to update your laptop WLAN driver. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online downloads support & -online Download Driver

  Also make sure you use the same WiFi standard that you have configured on the router, for example 802.11 g.

  What operating system do you use? Have you installed all service packs and patches?

• Satellite M30-604: unable to connect to the WLan

  Hi all

  I have some problems with my toshiba SM30-604

  First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???
  Even with the program auto-detection!

  The other big problem is with the wireless card.
  Since the first time I bought the laptop when I tried to connect with some internet wirless networks I had problems with certain types of escryption of these networks.

  If the network is an escryption
  WPA,
  WPA 2,.
  WPA - PSK
  WPA2-PSK
  I can not connect to this network and he brings a message, something like "the network may not be available at this time" Although it is.

  Even if has a WEP encryption and password isn't a 10-digit is brings a message like "the neck should be 40 bits or 104 bits and 5 or 13 ASCII characters and 10 or 26 hexadecimal characters.

  The last days I can not connect to any wireless network for the above reasons.
  I know that its an old pc, but it is very good even for today an I still use it even I have other laptops

  Please can someone help me?
  Will there be some updates for my card toshiba wireless?
  I downloaded the automatic detection tool, but it does not recognize my pc model

  Under my pc has this data:

  SM30-604
  model No. PSM30E-0SY2K-GK

  the wireless card must be the:
  Intel (r) PRO/Wireless LAN 2100 3B Mini PCI Adapter

  I'm desperate this problem.

  Nick

  Post edited by: niksta

  > First of all, I find the product in the section support somehow, even I can't find it by giving the serial number! ???

  The portable M30-604 PSM30E-0SY2K-GK is an old classic. Right?
  Well, Toshiba driver European page you will find three categories: Archive, book and Options.
  If you don't find this portable model of laptop in the computer category then I would say that the next step should be archiving. Right? To me, it seems plausible to check the area archives due to the age of the laptop.

  In addition, the books are sorted by serial number; means that you won't find satellite M30 604 but Satellite M30 PSM30E.

  To my knowledge the Intel (r) PRO/Wireless LAN 2100 supports only 802.11 B Wlan standard and only the key WEP, WPA, encryption (AES +).
  FTP://download.Intel.com/support/wireless/WLAN/SB/intelprowireless2100mpci_prodbrief.PDF

  This means that if the WiFi network is not set to 802.11 B and if the WiFi network has been set to WPA2 encryption, so you won't be able to connect to this network.

• The best way to connect 2 the application of ADF database servers?

  Until merge us the databases, I have a situation where I need to connect and to interview the two different databases. If the number of declaration is < 9 digits, use DBConn1, otherwise use DBConn2.
  
  I thought to use two modules of the application, but how would pass between the two connections in the code, let's say, a command button from the user interface with links?
  
  Is this possible at all?
  
  Thank you
  
  John

  In any case, you will need different display objects to query different data.

  The easy thing would be for create you to choose a database as the main one and in this database, DB links to the database. Then create a synonym for the table in the database, and then build your second view object against the synonym for the link to the DB.

  It is the best way to achieve your goal.

• Best way to connect several hard disks

  HI - since getting my new Mac Pro, I worked with two hard drives of 12 to promised Pegasus 2 Raid-5.  They have been great.  But my video player started to get crazy and so I bought two backup drives WD - 8 to, one to save the key on each PP2 files.  Unfortunately, it was too late to save the video player, as one of the bays failed.  Because it's Raid-5 and with the amazing and patient Vincent promise eSupport, I replaced the failed drive Bay and am now waiting while he rebuilds (if all goes well, without any loss of data).  Then it will get saved.

  Until it became clear that a bad drive Bay was probably underlying computer freezing, loss of images in video playback, etc., I was wondering if there was some sort of best practices for fixing of external drives.  With Thunderbolt, you can chain; But what to what?  Is there a limit any?  Can I plug two disks promise, then the one closest to you on the computer?  Must the WDs be connected in the same way, each to each, and the other to the computer?  Should there be just a Garland of four disks?   ????   In the old days, you had to look at how much energy was used during the USB and Firewire connection, but the true even for love at first sight?

  Surely you'd be recognizing any indication on how best to connect several hard disks.

  Thank you!

  There are 3 unique bus in the Mac Pro black cylinder. Better reactivity is with your readers spread between three buses, keeping in mind that video display takes nearly half a ThunderBolt Bus itself.

  You can use USB-3 for your backup drives - just keep in mind, it is only a sufficient bandwidth behind the USB to operate a chain of reading and writing of full tilt. If you simultaneously use devices more than that, you can start to see some cuts of your maximum transfer rate.

• What is the best way to connect my iPad Air to my hifi amp?

  I'm wanting to connect my iPad Air to my hifi amp and want to know what is the best method, I am currently using a headset taking racial RCA connection.

  Music compressed on an iPad is not designed to be played on a stereo. It was the first question I asked when I got my iPad.

  You can use bluetooth speakers, it allows to be systems for iPhones from and now you can play music Apple on Sonos.See link below. for the Forum.

  Apple music on Sonos

• How is the best way to connect the configuration of my router and switch?

  I have a cable modem. connect to a switch, I have 2 computers connected to the switch. I also just connected my router wireless switch. That's the best configuration or I lose my firewall of the router in passing is not by ports directly above?

  Most of the cable modems will give an IP address, so connect a switch to the modem and then connection of two computers and a router to the switch will usually result in one of these three devices, get an IP address (and internet connection), while the other two will not be.  (Notice that I guess a true "Modem" and not a "Modem/Router" device).  The correct configuration would be to connect your router to the modem (router gets the unique IP address).  The router can then process from the addresses IP what either side LAN of the router, then plug the devices you need (including switch) to the router's LAN ports.  This also ensures that all devices will be on the same subnet that your connection scheme to separate devices on the router wireless from the other two devices on the switch (here, assuming that you have a router/Modem device).

  HTH,

  JW

• What is the best way to connect the Xoom to a desktop monitor?

  I would like to power mirror my screen xoom on a desktop monitor for presentations by small group to the site.  I've seen some of the threads on hdmi to vga, hdmi/DVI and hdmi to hdmi, but I'm a little confused as to what is easier.  It seems that if you go with hdmi to vga you will need some type of converter, not just a cable?  If it was just a cable that would be perfect.  In addition, another option would be to hdmi for display port (published in December 2010), has anyone tried this? Thank you!

  @uberpixels,

  I think the easiest way is using a HDMI output on the Xoom to an HDMI-> DVI Cable. or HDMI-> VGA Cable. I use an adapter at right angles (adjusted to avoid breaking), HDMI port which offers a complete female HDMI.

  Here's the thread on this adapter:

  https://supportforums.Motorola.com/message/401234#401234

  Then, connect a HDMI-> DVI Cable for the monitor. If you want to copy to VGA, you may need to add the + 5V using the applicator of tension mentioned in this thread:

  https://supportforums.Motorola.com/message/414527?TSTART=0#414527

  I have a portable DLP I use with the Xoom and choose to use a small HDMI-> VGA Converter that meets my needs. Here's a thread on this configuration:

  https://supportforums.Motorola.com/message/375995#375995

  -Doc

• What is the best way to connect a time capsule from the airport to an existing dsl router?

  I have a Netgear D6300 router with built-in ADSL modem and I'm getting a time capsule from the airport. I thought to put the D6300 in Bridge mode and connect the TC via a ethernet cable but my netgear router is kept in a metal TV armoire or I asked myself if I put on the floor and used to extend my existing wireless which is a little spotty on the floor, but I didn't know if the connection on the hard drive would be too slow. However I read in another post is no longer that apple supports the extension of networks of "no apple"?

  The time Capsule will connect to the Netgear router using a wired Ethernet cable connection, permanent... no matter how you decide to configure things.

  Regarding the location, Time Capsule can be located just about anywhere that it will allow an Ethernet connection. If you want to time Capsule to "extend" the wireless Netgear, and then configure the time Capsule to create a new wireless network that uses the exact same wireless network name and password than the Netgear router. The result will be a network of 'big '.

  Should be a lot more work, but assuming that the Netgear gateway can be configured to work as only a simple modem, the Capsule can be configured as the primary network router.

• What is the best way to connect the two interactive reports?

  Hello
  
  =================
  Set of bottom-up
  =================
  I created two interactive reports - report on the project on the project page and report of tasks in a task.
  Project report on the project page can contain several projects.
  Report of the tasks in a task can contain several tasks.
  A project can have several tasks.
  But a task can have only one project.
  
  
  =================
  What I'm trying to reach
  =================
  When I click on a project name, it must pass The ID of project of work page and view jobs that are established for the project.
  When I create a new task, past project ID must be mapped to the task.
  
  
  =================
  Challenges
  =================
  1. How can I pass Project ID of the project page on the task page while clicking on the project name in the project page ?
  2. How can I get the project name in the page of work based on the project ID goes from the project page ?
  3. How can I view jobs related to the name of the project ?
  4. How can I take project ID passed to the task page and map it to a new task?
  
  Thank you
  Guy

  1. How can I pass project page ID of the project to the task page while clicking on the project name in the project page?

  Create point hidden in a task, for example: P2_PROJECT_ID. That the link on the column to the task page:
  Interactive report-> column change-> link.

  2. How can I get the project name in a task based on the project ID password page of the project?

  There are two ways you can create a function that will return the name of the project by id or you can post the name of the project to the task page (the second way is dangerous, you can miss some parts of your project name if you have a symbol ',')

  3. How can I view the tasks on behalf of the project?

  In the interactive report source add condition to your query, for example:
  and task_table.project_id =: P2_PROJECT_ID

• Best method of connection?

  I went away from wireless connectivity in hand (2 iPhones, an iMac and an iPad being the only wireless), but my iMac, printer, 2 x, 2 x, smart TV, DVD player, a PS4 BT TV boxes, booty and a use of Time Capsule a wired network through 3 x PowerLine adapters (1 in the living room 1 in a bedroom and the other in the "office")

  However, when my iMac back to TB, everything slows down and the TV images (via BT TV boxes) go 'blocks '.

  I appreciate there are some devices on my network, but in general things are very well - until the backup - then I would ask if there is a better way to connect the TC to the iMac that will not affect the network.  I thought that wireless backup has been pretty slow, especially when a full backup as complete, but I don't think that there is no alternative - without splashiing on a thunderbolt or any other drive (Firewire?) type.

  Comments and pine nuts you know :-)

  Pete

  However, when my iMac back to TB, everything slows down and the TV images (via BT TV boxes) go 'blocks '.

  There is no quality of Service in installation of Mac... Unfortunately the backups are rated most important computer and video streaming, which should always be the top of the heap of QoS.

  The problem is also that EOP use common bandwidth... Unlike ethernet, which is based around a switch that is able to run packages on multiple devices at the same time... without wire or can EOP do this.

  best way to connect the TC to the iMac that will not affect the network.

  Ethernet... still and always... and forever.

  I thought that wireless backup has been pretty slow, especially when a full backup as complete, but I don't think that there is no alternative - without splashiing on a thunderbolt or any other drive (Firewire?) type.

  How old is the iMac? If it's 2012 or later, it has USB3 ports that are fast and cheap.

  BUT... even USB 2 on previous computer is still faster than gigabit network. Even if the USB is slower on paper... It reality it works fine. And a self powered 2.5 "drive can be plugged directly on the mac and pretty well hidden completely from view.

  You can make occasional backups for the TC... and continue to use the local drive instead.

  Otherwise, you can wire the House with ethernet... a costly but total of the problem solution.

• Satellite M30 does not show the connection of the battery after 5 min of use

  Hello

  My Satellite M30 recognize the battery when placed first in and for 5-10 minutes.
  After that the power meter shows I'm on sector without battery. Any advice?

  Anyone know if it is an issue that could be fixed with a new battery, or if it might have something to do with the connection between the battery and the laptop?

  Thank you very much
  g

  Hello

  If the AC adapter is plugged into the laptop that Toshiba Power saver should show a connected adapter. In this case the laptop must not run on battery!
  If you you unplug the adapter icon which appears in the taskbar should move from adapter to battery.

  One question; How old is your battery?
  Usually after several times the battery loses performance and it possible s you will be able to use the battery only for a few minutes. After this period, the battery is empty and needs to be recharged.

  Maybe your battery performance isn't the best right now and it should be replaced. ?:|
  This should be checked permanently.

  Good bye