Best way to set up 6 1 TB SATA disks for ESXi performance than

Similar Questions

• Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  Apple Extreme, Time Capsule and Express on the same system, what is the best way to set it up so that all devices smoothly from one end of the House to another?

  I'm going to assume that you plan to have wireless devices.

  Let's say that the Capsule is your "main" router  If this is the case, then it must be located in the House, so that the distance between the time Capsule is the same for the outside walls of the House.

  Then, on the 'left' side of the House, looking for an airport to midway between the Capsule and time of the outer wall of the House. Do the same thing the 'right' side of the House.

  In other words, each of the two airports that "extend" the wireless signal are located at equal distance from the Capsule of time... but they are in opposite ends of the House.

  If you intend to interconnect all the airports and Time Capsule using a permanent, Ethernet wired... which by far is the 'best' way to put in place a network in terms of performance and reliability... then you can locate one of the devices anywhere you want.

• Best way to set up multiple iPhones within the family?

  We have 3 iPhones in our family, and we always use the same Apple ID for all three devices.  I understand there was recently some changes to ios, and this strategy may not be the best way to have things to put in place now.  I started seeing a strange behavior between phones, with calls/texts appear on the phones of other people.  Doing some research, it seems that perhaps we should all have separate Apple ID and then go the family share the road, so I was hoping someone could explain clearly how can I do to set this up.

  Right now I have my ID Apple we use for purchases, and it seems that we use an old account @me.com for our iCloud account... which I suppose is what has allowed us to share calendars, see all our devices to find my iPhone, etc.  My ID Apple is not the same as the address of the iCloud account.

  I work in it and myself usually as a guy... pretty strong goal, I will admit that all these Apple and iCloud IDs confuse me... so any help is appreciated.  My main goals here are:

  • Be able to see the locations of all the people of my family
  • Have no other phone calls/texts/etc
  • To share and be aware of purchasing iTunes on all devices
  • I have set up, Music Match on my Apple ID (I think...), so I don't want to lose this functionality across all devices
  • Share a family calendar that we do today (and I hope not to lose what is currently implemented)

  Thanks in advance!

  Add to this... I just looked at the option icloud on my phone and it shows my address @me.com as a principal and an address of @icloud.com as a verified.  My apple account is my gmail address, and my wife and daughter use their gmail as their primary e-mail accounts.

  So I was wondering if I should put in place of the apple for each of them using ID addresses gmail... then we would all have an identifier associated with our gmail addresses apple.  If this is the case, how to set up the account icloud?  I can leave it like that, or should I set up with my gmail account, as my apple ID?

• The best way to set default styles in the libraries of widget for use by the public?

  I am putting together a code to go with my blog, and it will include a custom component. I would like to than the default component to use a style that I set, but I also want the user to be able to replace it easily. Anyone have any suggestions on the best way to do it?
  
  I see that the range slider [url http://www.jidesoft.com/blog/2011/10/04/meet-our-first-javafx-component/] of JideSoft we explicitly setting the skin in code in their example. Ideally the end-user would not do that. So, what is the best practice? Should I create a skin for my component and then set the style in my code? Should I set a basic style sheet that somehow always is imported, etc.?
  
  Essentially, I want to have my base of work styles in the same way that caspian.css is - is possible?

  I gave a talk at JavaOne on creating custom controls, perhaps the slides can be useful in answering some of your questions. I blogged about my three talking:
  http://fxexperience.com/2011/10/slides-from-JavaOne/

  In particular, you will be probably more interested by the following slide deck:
  https://oracleus.WingateWeb.com/published/oracleus2011/sessions/24140/S24140_2556650.PDF

  Hope that helps,
  -Jonathan

• Need advice on the best way to set up a 6 nic Server

  I have a server with 6 cards.  Looking for some suggestions on the best way of provision.  We use the software iscsi client.

  Here's what I think to do:

  0/2 NIC (one onboard and a pci): VmNet

  1/3 network interface cards (one on board and a pci): vmkernel: vmotion/service console

  approx 4/5 (pci): vmkernel for software iscsi

  Is there a better way to do it?  It's just the way I'm used to doing.  It would be nice to maximize the number of ports used for iSCSI.

  Thank you!

  -shane

  Tough call...

  If you lose the management network, HA will cause a failover.

  If you lose the iSCSI, all virtual machines fail, but HA will not switch.

  If you lose VM network, all communications from the virtual computer fail, but HA does not tip over.

  If it was me, HA failover is a better option than full scall VM failure or net VM...

  But now, you will get twelve opinions on which is better.

  Dave Convery - VMware vExpert 2009

  ************************

  Accomplish the impossible only means that the boss will add it to your regular tasks.

  Doug Larson

• What is the best way to set up EA6400 with WRT54GP2 to network home?

  We must keep the WRT54GP2 router with VOIP telephone service.  Any help would be appreciated.  Thanks, n

  Hi nikki2819. I suggest that you configure EA6400 as a secondary router via a LAN - WAN connection with your WRT54GP2. In this way, the EA6400 router can function as a router for full commitment and can have its own network, while the other router can focus on the VOIP line.

  Check out this link: http://kb.linksys.com/Linksys/ukp.aspx?vw=1&docid=785463d9ecaf4cac84aed245b08d615f_3733.xml&pid=80&r...

• best way to copy backups time machine on another disk

  From an article by Apple (here), it seems that the best way to copy a TM backup (since one external hard drive to another) is drag-and - drop in the Finder. The CCC does not (and not only Mac backup Guru)-due to types of file owner by Apple. My record is about 1.6 to. The Finder is still the best method to use?  TX

  Yes, in accordance with article. TBS 1.6 will take much time since you will be transferred via LAN. I suggest you use Ethernet. The 2011 model is expected to support Firewire. If the other computer also supports Firewire, then use it. If she supports Thunderbolt, then get the adapter from Apple. It will probably take more than 2.5 days.

• What is the best way to set a default value on an attribute that is dependent on a query?

  Hello master,

  I use Jdev 12.1.2. I have a project requirement where I have to set a default value for an attribute. The default value is derived from an SQL query.  I was intending to set the value of the Create method of the entity using VO class. But I preferred to have an opinion on if I do best.  Please advise

  Thank you and best regards,

  Mohamed

  It is a logical place, so just go ahead with this...

• What is the best way to set up a key of my emulator configuration?

  I have a pc game controller which is an exact equivalent of the Playstation gamepad.

  I always use it when playing games via the Nintendo 64 emulator on my pc.
  What is the best configuration of key to use?

  Try this .
  this or
  Does that help?
  Josh Luitjens - self-taught computer Techhttp://www.pchalp.com/

• What is the best way to set a built-in webcam?

  My phone fell recently on his side of the counter for hardwood floor. My laptop (HP Pavilion g6) survived the fall and has seemed to suffer only a minor chip on the upper left. Everything seemed to remain as it was before the fall. The next time I tried to use my webcam, however, seems to be zoomed in its entirety and not in the update. When I place my thumb on the camera, it changes the lighting for a second before returning to its original state blurred. I think that the webcam is still working but perhaps has been jumped or moved? What is the best move for me to have this problem?  I lack the idea of buying an external webcam.

  Hi krissy2314,

  As mentioned by Hula_Baloo in the previous post, you need to contact the manufacturer of the computer for help because it is an built-in webcam.

  See the article-

  http://WWW8.HP.com/us/en/support-drivers.html?JumpID=ex_r11400_us/en//IPG/_ps_g_hpsupport/support&k_clickid=AMS | 13. 49711 | 6c4926f7-3e17-8788-b2d6 - 00003475191c

   

  Hope this helps!

• Best way to set up a host of ESXi 4 with only 3 network cards?

  Set us up an ESXi 4 Host with 3 cards.  It is a stand-alone server that will not connect to the SAN FC network.  However, we respect the vStorage VM function if necessary.

  With only 3 cards on hand, there's any suggestion on the speed and the consolidation of NETWORK cards that we set up?  Our network administrator wants to give us only 1 x 1 Gbps Connection + 2 x 100 Mbit/s.

  Your suggestion is requested

  Thank you

  Post edited by: TonyJK

  Since you do not connect to FC SAN I guess you have local storage or storage over IP.

  In this case it is recommended to dedicated 1Gbit link for IP storage. If you can not have dedicated you will share Gbit link between the storage on IP and VMs.

  100 MBit NIC cand be used only:

  (1) dedicated storage VMotion or IP management interface

  (2) relief links networks of VM and management failover

  You definitely need at least 2 running on Gbit network cards

  ---

  MCSA, MCTS Hyper-V, VCP 3/4, VMware vExpert

  http://blog.vadmin.ru

• What is the best way to set permissions for the DNSAdmins?

  If applied to the object in ADSIEdit adminsdholder MicrosoftDNS will reset permissions?

  We want permissions to be consistent in the whole area and our areas our ineritting DNSAdmins not when we create them.

  Hello

  That your computer is under domain, you must contact the technet forum, where we have of the support technicians who are well equipped with the knowledge on the issues of domain, do visit the link provided below.
   
  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Are there guidelines on the best way to set up multiple users?

  My hard drive has been reformatted; Operating system reinstalled; Windows 7 Home premium operational. I now at least 4 users (one being administrative, each separate passwords and permissions.) I wonder if there is some general guidelines in doing so. I'm not well the language in the OS (c :)) properties/security.)

  Sorry, I'm not sure I follow 100%, but that is the information that you need:

  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  more info - http://www.homeandlearn.co.uk/BC/win7/user_accounts.html

  My apologies if I misunderstood.

• Best way to set the default values for the form elements

  Hello
  
  I have a form with a lot of defaults that is mentioned below...
  

    Field                      value  
    created by             :APPL_USER
    creation_date         SYSDATE
    last_updated_by     :APPL_USER
    last_update_date    SYSDATE
    item1                     value1
    item2                     value2

  I am currently using calculation-> after presents... then when we create/update a record... these computaion takes place and the default value for the inserted values get... THIS WORKS PERFECTLY WELL.
  
  I want to know... If this approach is fine OR we can have a better approach to achieve...?
  
  Thank you
  Deepak

  Hello

  I think it's good if it fits your need.

  But why you have these fields in the form?
  created by: APPL_USER
  CREATION_DATE SYSDATE
  last_updated_by: APPL_USER
  last_update_date SYSDATE

  The user can enter the ones?
  I thought that those who are to audit and I would fill those drop with trigger in the database.
  So that you get the same "correct" values if you need to manipulate the data with example of sql client

  BR, Jari

• Best way to set up a REPO?

  We have therefore almost 7 TB of disk space (local) for AppAssure.

  I'm not sure if I should create a repo to 7 full (less 500 GB use restorations or sys)

  OR

  Two 3.5 to rest.

  Is there a recommended configuration or does anyone have advice?

  Thank you

  Hello Stephen,

  Yes, you must create a repository on each DL 4000.  As you say, deduplication will be better, but you will also be optimizing the matrix disk I/O.  In the case of a repository, AppAssure will be much on reading and writing in a repository and generating the drive array not in random read/write.  If you have two repositories, you'll be dividing the Bay load of two repositories on the same I/O to disk and producing essentially random read/write i/o, which reduces the performance of the disk.

  I highly recommend to never put more than one repository on a disk array.  That is why the DL 4000 Configuration Wizard recommends using any storage space for storage.