Best ways to manage the CSS & JS updates?

Similar Questions

• Best way to manage the accessible host check after restart

  vCO newbie here...

  I'm building a workflow for (a) take an array of clusters, (b) the loop through a cluster and take a picture of the armed forces, (c) using the table of the host, in Maint Mode on first host... run a script, restart (d) check host reconnects and move then to the next host... until all hosts have been completed.  I'm looking for the best way or an example of verification of accessibility of the host and to wait for the host is accessible before you continue.  Any help is greatly appreciated!

  Hello Carlos, you certainly came to the right place for this question vCO is ideal for this kind of thing... I got to play a little before I restart something that resembled what you're asking for is basically a host and wait for it to be reconnected.

  Well, the workflow "Reboot Host" indicates indeed vCenter API to restart a host, but it does not wait for the host to come back to the top, she finished just all right because that's what indicates the API... Therefore, we must introduce a timer to wait a few minutes and to give a chance of him having turned off as part of resetting to the host. Then we check the connectionState of the host to see if it is 'connected' - otherwise, wait a few minutes and repeat the loop until the host is connected again. See example attached workflow. I recommend a MINIMUM of 3 minutes for the wait time. Test this several times in your environment to see what still works for you and adjust as necessary.

• Best way to prevent the collection of updated?

  I have a problem/question about the dataGrid control, see code attatched.
  
  When I click on a line in the lower grid I want to copy the information in the upper grid. I don't want the collection of grids below to be updated when I edit the cells in the upper grid.
  
  If I use the code attatched and edit a cell, the collection in the grid below to update when I scroll up and down lines (in the lower rack).
  
  The only way I can stop this update is to set the dataProvider "[{colA: dataGrid1.selectedItem.colA, colB: dataGrid1.selectedItem.colB, teachers: dataGrid1.selectedItem.colC}]" instead of "dataGrid1.selectedItem".
  
  Is this a bug or what I am doing wrong? It should be a better way to prevent the updated collection. I tried different events at the same time check if/when the collection is updated but no success here. I can't get the function 'preventDefault()' to work.
  
  Any solution/suggestion?
  
  Kind regards
  
  the Sweden newbe...

  You need two independent dataProviders, one for each grid. then you need to do a * copy * of the row of data before put you in the second dataProvider. This is because that just assign the object (selectedItem) will be just a reference to the same object.

  You could use ObjectUtils.copyObject (), or simply create a new Object() and assign the properties and the values for the new object, and then to the second dataProvider addItem().

• What is the best way to manage the use of the XP processor and backup storage?

  I have a three year old computer, I use a lot of disk space and burn the DVD for backup storage. I am a heavy user of CPU too. How do you recommend that I improve it? Thank you

  * original title - my Windows XP storage... *.

  Hmmmmmm!

  "I use a lot of disk space" - remove all the files that you do not need, does not store things that you don't use often. Delete unwanted files, i.e. run diskcleanup for example.

  "burn the DVD for storage of backup" - If you have USB2 then consider getting an external USB2 hard drive. Its easy to set up as and when necessary and is easy to copy/backup information to.

  Indeed, consider laying a HD internal or (easier) a USB2 external hard drive for storage from day to day, not just a backup.

  "I am a heavy user of CPU too" - its sometimes possible to upgrade your processor one installed initially, but it will depend on your type/brand/model of PC. Sometimes possible, sometimes it isn't. But it is usually at best a stop gap.

  If you have any free ram slots, additional ram stick in (get the right type for your PC) that can help speed up actions for certain tasks. If you play games and you have a "graphics card", level it as well.

  Best of all, is to consider a replacement PC. If you are really short on HD and have a very slow motherboard or CPU, long term on a new PC is probably going to be the best.

  Not sure if this is the type of information you were after? If it is not coming back.

• Best way to manage the loading differed in TreeView

  It is possible to attach a listener for each expandedProperty TreeItem element, then by loading the children if the GET node expanded, but am I really supposed to attach a listener for each TreeItem element in my hierarchy? Is it possible to attach a listener directly in the TreeView control which would be notified when a node is expanded?

  Yes, element tree events bubble chain of parent tree to the root, which is usually the TreeView.root element. You can simply add a listener for this element root to be notified of all event types defined in TreeItem, including expansion, collapse, added/removed children, value/graph modified, etc.

  -Jonathan

• What is the best way to manage the result variable? (IF THEN GOTO)

  I want to ask a question and then use the response on the position of my result, in a very old language and is no longer used, it would be IF a = 1 THEN GOTO 20, SO a = 2 THEN GOTO 30

  I did experiment with switch, case

  but its not really give me the results that I'm at the end, the conclusion is i do not use the syntax correctly or I use the right method.

  var docRef = app.activeDocument;

  var items = docRef.selection;

  var abRef = docRef.artboards;

  var swatchBoxX =-71.5

  var swatchBoxY = 372.518

  var swatchBoxSize = 22.04

  var totalSelected = items.length;

  newGroup var = docRef.groupItems.add ();

  newGroup.name = "ArtworkGroup";

  app.coordinateSystem = CoordinateSystem.ARTBOARDCOORDINATESYSTEM;

  abRef.setActiveArtboardIndex (0);

  position var prompt = ("Please enter the Position (1) front, (2) = back, (3) = left channel, (4)" = right channel ', '1', 'Print Position' ");

  switch (position) {}

  case 1: swatchBoxX =-71.5.

  break;

  case 2: swatchBoxX =-490;

  break;

  box 3: swatchBoxY = 840 & & swatchBoxX =-490;

  break;

  }

  If (totalSelected > 0) / / check selected objects

  {

  for (var j = 0; j < totalSelected; j ++) //loop through selection

  {

  var tpBox = swatchBoxX +-34.2

  var currentObject = items [j];

  var color = currentObject.fillColor.spot;

  myText = docRef.textFrames.add ();

  myText.contents = color;

  myText.position = [401, swatchBoxX];

  Rect = docRef.pathItems.rectangle (swatchBoxX, swatchBoxY, swatchBoxSize, swatchBoxSize) var;

  swatchBoxX = tpBox

  rect.fillColor = colour.color;

  Rect.stroked = true

  items [j] .duplicate (newGroup, ElementPlacement.PLACEATEND);

  } //end for

  } //end if

  else {}

  Alert ("Please select at least one object");

  }

  newGroup.resize (20,20,true,true,true,true,20,Transformation.CENTER)

  newGroup.position = [160, -130];

  I just need some advice please

  Yep, put your more likely to use the first option, and more add an option 'default' in the end, in the case where a person enters a key out of reach

  default:
       swatchBoxX='whatever you want';
  

• What is the best way to store the RCS for an insert/update in this rec

  Oracle on Win 64 non-conteneur 12.1.0.2

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  I thought of a line after trigger, but did not know if this trigger to store the current_scn would still fire that trigger again (recursive trigger).

  Someone at - he a good idea of what the best way is to do?  The devs don't want to store the pk and the SNA in yet another table...

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  3rd party applications retrieve data from tables (all data).  We are looking for a way for them to just pull what is new or updated updated since their last sweater.

  I suggest that you try again and give all OF THE REQUIREMENTS.

  You have rejected ANY answer given and he justified using 'hidden' on what knowledge management or the devs want or do not want to. Stop making us guess what are the requirements and constraints. If you want a real answer then tell us ALL the news.

  When a record in one table is inserted or updated, what would be the best way to store the RCS for this record in this folder.

  Solomon answered repeatedly. If you want to add a column to a table to store the then "best" SNA is to let the Oracle to do this for you automatically by using the DEPENDENCY LINE.

  As he says also re-create the table to add this clause will be MUCH MORE EFFECTIVE that everything THAT you can do it manually. It will be also more accurate because Oracle will fill the value ORA_ROWSCN with the SNA at the time the line was committed. You, as long as user, can't fill a column in function when a line is engaged since real VALIDATION belongs to a transaction, not the line or the trigger that you use.

  Yes - there are two drawbacks to this method:

  1. you need to re-create the table

  2. you cannot add an index to this "hidden" column

  The devs don't want to store the pk and the SNA in yet another table...

  Then? Who cares what the devs want to do? You want the BEST solution? Next, you will need to put aside personal preferences and determine what is the 'best' solution. Why it is important that certain dev wants to do this or not?

  OK, the problem of biz is now, 3rd party external users are an all-wheel drive large number of tables in the database via the API that we wrote.  That was obviously interrupted OLTP during the day.  To reduce to the minimum, we want for them just to extract data that has been inserted/updated since their last sweater.

  It is the definition of a "replica" DB Then why don't you consider a real replicated DB? You can use DataGuard and have replicated DB which is read only that can be used to generate reports. Oracle does ALL the work to keep ALL the tables in sync. You and your developers do NOTHING!

  We thought that store the RCS higher their last sweater would allow the API to extract only data with YVERT higher than their last data pull CHN.

  OK - except you keep rejecting solutions actually do. Ask you questions about the SNA stored in the same table, but then reject the solution that does this. And then you add your "devs" don't want to store the info in a new table either.

  Then your solutions must ONLY use the replication or Log Miner. The REDO logs have all changes, if you want to extract yourself. Replication (e.g., DataGuard) will use these logs for you to maintain a replicated database.

  We thought about it, but recreate all tables in production with ROWDEPENDENCIES as well as dealing with CF and other dependencies idea this was shot.

  Well you NEVER mentioned you "thought that" and rejected it. And you NEVER mentioned anything about FKs and other dependencies. What is FKs and other dependencies which prevents this working solution? Tell us! Give us ALL the information.

  Wouldn't a trigger AFTER LINE capture the commit YVERT?  Or is after really not after validation?

  No - a trigger has NOT one commit. A trigger runs as a step in a transaction. Validation applies to the entire transaction. Until you, or Oracle, issues a commit, there is NO "committed SNA" to be stored as ORA_ROWSCN.

  You can easily see that for yourself. Create a simple table with dependencies of the line and then update two different sessions.

  create the table emp_scn rowdependencies in select * from emp where rownum<>

  Select empno, emp_scn ora_rowscn

  Update emp_scn set work = 'b' where empno = 7499

  commit;

  The first SELECT statement will show you that each row has the same SNA.

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622201

  7521,70622201

  Now, do the update (but no commit), then SELECT it

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,

  7521,70622201

  Where is the value of 7499? This session will NOT see a value for the changed lines in the current transaction. Other sessions will still see the old value.

  Now do the validation, then SELECT

  EMPNO, ORA_ROWSCN

  7369,70622201

  7499,70622301

  7521,70622201

  7499 now has a new and different value than the other lines. It will not be this new value until the validation occurs.

  Yes, row_dependencies would be the best way to go.  But mgmt doesn't recreate all tables for this.

  Well, you got the answer you want. You ask the best way. Now, you say that you were told the best way. But now you don't like the answer.

  How is it our fault? Your question has been answered wasn't she?

  Here are the facts:

  1 oracle creates a history of changes - the REDO log files

  2. you can use Log Miner to extract these changes

  3. you can create your own change log by adding a log file of MV to your table.

  4. you can then write a custom code to use this MV log file to determine which rows to "reproduce".

  So far reject you all THE POSSIBLE solutions.

  Accept it or change the requirements to allow one of the solutions proposed to be used.

  Personally, if I HAD to use a customized solution, I would use a MV journal to record the ROWID of the lines that have changed (for tables ROWID cannot be changed). I would then extract the appropriate lines by pulling on the lines corresponding to these row ID.

  Even that has problems since a line can be changed several times and children lines can also be amended several times - these questions FK you mentioned.

  I suggest you read this entire thread on AskTom a dozen years ago. It addresses ALL these issues.

  https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:16998677475837

  Then in your next reply on this topic give us a summary of where some things with your question and what help you further expect.

• What is the best way to manage applications so that they do not fill a space of memory?

  I have an iPad Air Os9, 64 g

  However, I am already up to 39 g mem.

  What is the best way to manage applications if tat I can use them, but no pork then my mem space?

  y at - it an app that manages the apps?  should I delete and re-download a few apps later?

  I would like to take advantage of many more applications that I believe I have space for.

  You can see how much storage resumes via the settings app > general > Manage Storage - this screen lists each app space (the application and its content), total by selecting an app on this screen should tell you how much space the application content (files, documents, etc.) resumes.

  y at - it an app that manages the apps?

  No, iOS is a sandbox environment, apps can control or manage other applications.

  should I delete and re-download a few apps later?

  Depends on the app. deletion of an app will also delete its content, if it is an application where its content is important (such as documents), and that content is not stored elsewhere (e.g.)  Dropbox or cloud server), you may lose this content by deleting the app.

• What is the best way to check the data

  What is the best way to check the actual changes in the data, i.e., to be able to see each insert, update, delete on a given line, when it happened, who did it, and what looked like to the front row and after the change?
  
  Currently, we have implemented our own audit infrastructure where we generate standard triggers and an audit table to store the OLD (values at the beginning of the Timekeeping point row before) and NEW (values at the beginning of the point of timing after line) values for each change.
  
  I put this strategy due to the performance impact there (important say least) and because it's something that a developer (confession, I'm the developer) came with, rather than something is a database administrator came with. I looked in the audit of the Oracle, but it doesn't seem like we would be able to go back and see what a line looked like at some point in time. I also watched flashbacks, but this seems like it would take a monumental amount of storage just to be able to go back a week, much less the years currently keep us these data.
  
  Thank you
  Matt Knowles
  
  Published by: mattknowles on January 10, 2011 08:40

  mattknowles wrote:
  What is the best way to check the actual changes in the data, i.e., to be able to see each insert, update, delete on a given line, when it happened, who did it, and what looked like to the front row and after the change?

  Currently, we have implemented our own audit infrastructure where we generate standard triggers and an audit table to store the OLD (values at the beginning of the Timekeeping point row before) and NEW (values at the beginning of the point of timing after line) values for each change.

  You can either:
  1. set up your own audit custom (as you do now)
  2 flashback Data Archive (11 g). Application for licence.
  3 version check your tables with Workspace Manager.

  >

  I put this strategy due to the performance impact there (important say least) and because it's something that a developer (confession, I'm the developer) came with, rather than something is a database administrator came with. I looked in the audit of the Oracle, but it doesn't seem like we would be able to go back and see what a line looked like at some point in time. I also watched flashbacks, but this seems like it would take a monumental amount of storage just to be able to go back a week, much less the years currently keep us these data.

  Unfortunately, the audit of data always takes a lot of space. You should also consider the performance, as custom triggers and Workspace Manager will perform much slower than the FDA if there is heavy DML on the table.

• What is the best way to use the Y50-70 battery please?

  I bought the laptop y50-70

  but I want to know what is the best method to use the battery.

  and the best way to recharge.

  NOTE *.

  IAM always use the cable and I gave the battery except a few times.

  Thank you very much..

  Best way to use the battery, if your laptop should ALWAYS be connected in-

  Go to eat energy Lenovo - should be a RED icon in the system tray - and choose the mode for a better health of the battery (or battery Protection or health of battery optimized mode).

  I don't know what the energy Manager version you have, but the option must seem similar. What it does is, it will keep your battery charged ONLY up to 60 percent and will increase its service life.

• Best way to manage databases 8i and 9i?

  Hello
  I'm looking for the best way to manage databases 8i, 9i, 10 g and 11 g with EM (of course, the upgrade from 8i databases is not an option). I installed SGD 12 c successfully, but the 12.1 agent does not connect to the 8i databases. What are the alternatives?
  -L'agent 10g can handle 8i, but he will be able to connect to 12.1 SGD?
  -If this does not work, I guess I need a SGC 12.1 for 9i, 10g and 11g databases and a 10g SGD for 8i databases. Is that a viable solution? Box 10g and 12.1 SGD coexists in the same environment?
  
  I'm looking for the best script that actually works, I understand everything that connects to 8i is not supported.
  
  Thank you.

  Hello.
  I'm afraid that you have understood.

  We will distinguish MONITORING that is done by the management agent (administration, maintenance, performance management etc) - which is made directly from the WHO.

  According to my experience:
  OEM 10 G is the latest version that can totally HANDLE 8i databases.
  OEM 11 G can MONITOR 8i (via an agent 10 G) databases, but cannot MANAGE them (or in other words, the 11 G SGD cannot connect to the 8i databases).
  OEM 12 c cannot CONTROL or MANAGE 8i databases.

  If you use OEM to manage your 8i databases (and intend to continue this way) I advised to retain a dedicated OEM 10G installation for the databases.
  There is no problem using 2 different installations of the WHO and several organizations choose to do for various reasons.
  The disadvantages are that you will need to duplicate your configurations OEM (patterns, rules etc.) and of course you will not be able to manage all the databases in a single console...

  If you use OEM to monitor 8i databases, you can create a set of parameters defined by the user that will run on a 9i database and connects to the 8i DB link databases.
  This solution is less than ideal, but it could eliminate the need to maintain another facility of SGD if all you need to watch the 8i databases.

  Erez.

• What is the best way to support the retina screens?

  Hello

  I've done recently for my custom panel UI code only, but my retina users report that everything is still pixelated (I did have the chance to find a machine of the retina to test yet myself). I had hoped to make the user interface in the code would make it works naturally, but appears not to be the case.

  In this research, I stumbled upon the users of mobile applications using FlexGlobals.topLevelApplication.applicationDPI together a target DPI, but appears not to exist in the CS Flex SDK 3.4.0 (which seems to be something Flex 4).

  What is the best way to support the retina display for my Panel? As far as I know, Flex 4 does not work with the CSXS library.

  Thank you

  Cameron

  Looks like there is no way for you to do this in Control Panel. We need to update some components to be HiDPI aware first. Stay tuned...

• What is the best way to refresh the table after autosubmit (10.1.3.4)

  What is the best way to refresh the table after autosubmit?
  
  I have a page that contains a table where if one of the fields is changed it autosubmitted where the view object changes some attributes, based on the field having been changed. I need these modified attributes that appear in the table. But without doing anything, the only way to see these values is to cause the iterator updated table.
  
  I've been refreshing the table is having a method in a grain of beacking called "getSystemSettingIter.getCurrentRow ();". This seems to be a bit of a hack for me and I was wondering if there is a better way to get the table to update.
  
  Thanks in advance!

  Have you tried setting between the two partial page refresh?
  http://www.Oracle.com/pls/as111120/lookup?ID=ADFUI385

  http://download.Oracle.com/docs/CD/E15523_01/Web.1111/b31974/web_form.htm#CACEIEEI

• How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  How long the Messages keep history to Yosemite? I know for iDevices you can choose between 1 month or 1 year but I wonder about the way it manages the Mac...

  Messages or e-mails?

• Need help: best way to exchange the Ipads?

  Dear all,

  Need help a genre:

  I use Ipad Air2 and my father is using retina Ipad Mini... I gifted him before 2 years...!

  We thought to share the Ipads because he loved the biggest... Can someone guide what is the best way to swap the parameters of the iPad?

  It is by taking backup and restore from Icloud? There will be data loss? or anything else that needs attention (something that he needed to be reconfigured)?

  Any help is very appreciated!

  Make a backup of each individual iPad. Use your own accounts: How to back up your device using iCloud or iTunes - Apple Support

  Import your photos from each iPad: import pictures and videos from your iPad, iPhone or iPod touch to your computer - Apple Support

  Then do it on every iPad: what to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  Then restore the backup in your 'new' ipads: restore your device from an iCloud or iTunes backup - Apple Support

  If the ipads have the same size of storage with the same iOS version, it should work fine. -AJ