Error message "frequency out of range".

Similar Questions

• When booting computer error says "frequency out of range" in Vista

  I tried to play the fortress team 2 out of steam when he says "frequency out of range" when he started. I restarted my computer, he got to the start screen, but with the screen that he always says "Frequency out of range" there is sound but no screen. I tried to change the resolution in safe mode, but it still doesn't work. need help please

  * original title - when I turn on my computer, it says "frequency out of range."

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do the restore of the system in Safe Mode, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  See you soon.

  Mick Murphy - Microsoft partner

• New monitor displays an Error Message "Signal out of range" when computer starts

  Installed new ASUS VS24H-P control on my computer and I get this image of "out of range" bouncing around the corners of the screen.

  This means that the computer sends a signal that the monitor is not capable of displaying.  It could be:

  • A screen resolution (width x height pixel size) is selected, the monitor cannot display
  • The refresh rate (Hz) is the one who can not display the monitor
  • These two

  If you have another monitor, you can plug it to visit your office. Right-click and choose the resolution of the screen, then turn it down to a 'safe' resolution like 1024 x 768 (most monitors can display this).  Then plug your new monitor back and turn the resolution back to a better suited for this monitor.

• "Frequency out of range".

  After launching a game, my computer has been changed, (I think) 1600 x 1200. Of course, it's too much for my monitor to manage, so the screen becomes black, and it is written in a blue box "frequency out of range". (and the box bounces around the screen making fun of me.) If I try to restart windows, it won't happen again, so I have to restart in safe mode. I can't change my resolution in safe mode, and if I try to switch to normal mode to change it I get ""frequency out of range,"and I don't see what buttons press.»

  BTW, sorry for the bad grammar

  --------------------

• I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.

  I'm not tech guru when it comes to computers.  I don't really know enough to get into trouble.  Here's my problem.

  For the last six weeks or so, I keep getting dropped offline.  AOL is my browser and I get the message "your AOL software has encountered a problem" or words to that effect.  Tech AOL were useless to solve the problem.  I checked my error messages and noticed that when I fell off line, most of them involved a WININET problem.  I know little or nothing of WININET, but it seems that this may be the problem based on the error messages 9 out of 10 say involve this part of the Microsoft software.  It's just a guess on my part, but the problem becomes very irritating to say the least.  So, if someone can you please throw some light on my problem it will be greatly appreciated? This WININET error message might have nothing to do at all with hit his offline, but thought I'd ask at least satisfy my limited knowledge of computer programs.

  Thank you

  Gordon

  Gordon

  To see if your system or software from AOL, what happens if you connect to AOL by using another browser (like Firefox or IE)?

  Wininit is part of the operating system and usually if it was the problem you would have other problems on your computer then I suspect it's an AOL software

• RVL200 error message: DHCP IP address range into conflict with the LAN IP address

  I have a RVL200 (firmware v1.0.12).  I use it mainly as a firewall, but also taking advantage of the DHCP server on this subject - at least I thought I was!

  When I configured the RVL initially (several years ago), I have it has assigned an address 192.168.0.128 LAN IP and enabled the DHCP server.  The DHCP address for the allocation range is 192.168.0.100-. 149.  I have not assigned a DNS server address (don't remember why not - maybe - because of the same issue, I'm now face).  Since then, whenever I have to appear a new PC on my LAN I put client PC using DHCP to get an IP address... but I need to manually specify the DNS server address (which is logical in the light of what I have described so far).

  The question I have now is that I want to assign the DNS server address on the DHCP server on the tab Configuration RVL, so my client DHCP PCs will automatically resume the DNS server address.   But when I enter the address of the local DNS (192.168.0.1), the RVL gives me the error message listed above (conflict IP range).  I can't understand why...

  The "strange thing" I see is the DHCP of the RVL / status tab - at the top of this tab it lists the DHCP server address is 192.168.0.1.  This is the address of my DNS server / domain controller.  And the IP address of the domain controller is assigned statically (if it matters).  So I do not know why the RVL shows the DHCP server or my DNS server / DC, rather than showing his own address de.128.  Or why I get this error message when I try to enter the address of the DNS server?  Just as an experiment, I also tried entering the other IP addresses, just to see what happens (all on the local subnet)... and they all return the same error message.

  Any ideas?

  Thanks in advance.

  Adam

  1. the address LAN IP of the RVL shouldn't be in the DHCP address pool. I guess that causes the error message when you try to change the settings for the DHCP server.

  2. I would say that you Flash the latest firmware 1.1.7 on your router. Read the release notes.

• Error message is out-of-the box joins to the custom error message?

  Hi all

  I try to display the status message of return 203 CyberSource below.

  
  

  "The general decline of the card. Any other information provided by the issuing bank.

  
  

  
  

  but, I see the error message out-of-the box "[cardType] credit card could not be authorized for payment: general decrease of the map" is adding to my error above.

  
  

  Please tell me how this happens and how to stop adding error meessage custom out-of-the box to my message.

  Thank you

  Vishnu

  Hello

  the string of pipeline authorizePayment (/ atg/commerce/command/processor/AuthorizePayment) is the addition of the error. The message is defined in the resource bundle \atg\commerce\order\OrderResources.properties. In theory, you can change the message by substituting the resource group in the DCS\lib\resources.jar\atg\commerce\order\OrderResources.properties file.

  David

• audioeng.dll error message check out iTunes or any program that uses sound

  audioeng.dll error message on Windows Vista 64

  Here is the still unresolved audioeng.dll error message during the startup of iTunes or any other program that uses sound:
  "C:/windows/system32/audioeng.dll is not designed to run on Windows or it contains an error.
  Updates to Vista 64, probably after one of the windows

  have not found a solution yet.
  Please answer if you know the answer to that.
  Thank you.
  -i.

  Yay!
  I fixed it!

  Here's how:
  I looked at the advice of Robert (thanks Robert!) and thinking that it is must be a typo - 64-bit should be Wow, not sys32, just hypothetically.
  So, I checked my Wow folder and found 0 bytes audioeng.dll there as well - I didn't replace yesterday with snached dll, I only replaced front sys32. The same dll is used twice by the system.
  I decided to take the risk to replace with the same dll snached.

  Here are my steps:

  1. Tear off the healthy donor machine DLL
  2. Start the bulb--> cmd with admin permissions
  3. in the command prompt writing
  • takeown /f C:\Windows\SysWOW64\AudioEng.dll
  • ICACLS C:\Windows\SysWOW64\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\SysWOW64\AudioEng.dll
  • takeown /f C:\Windows\System32\AudioEng.dll
  • ICACLS C:\Windows\System32\AudioEng.dll/grant administrators: F
  • copy YourFreshDllDirectory\AudioEng.dll C:\Windows\System32\AudioEng.dl

  Make sure you did it in both places.
  Enjoy!

  Thanks a lot for all help.
  I really appreciate it.
  -Irena.

• Error message of out game card

  Hello world

  I make a deck of cards with two sets of brewing. Two decks cards are also expected to flip and drag. My first apron works well, but in my second game, the map will not return. Whenever I try to return the card to the second bridge, I get this output message:

  TypeError: Error #1009: cannot access a property or method of a null object reference.
  at Wicky / clickCard)

  I get no errors in compiler for the moment, but I get this message every time I click on the two bridge. Drag the map, but it don't flip, and this error message is displayed. Does anyone have an idea hence is my mistake maybe?

  I have two files, Wicky.as and Wicky.fla. Here's the code for Wicky.as. Thank you in advance for your help!

  Wicky.As

  
  package {}
  import flash.display. *;
  import flash.events. *;

  SerializableAttribute public class extends MovieClip {} Wicky
  game constants
  private static const boardWidth:uint = 7;
  private static const boardHeight:uint = 7;
  
  boardOffsetX:Number private static const is 120;.
  boardOffsetY:Number private static const is 45;.

  private var firstCard:Card;
  private var secondCard:Card;
  private var thirdCard:Card2;
  private var fourthCard:Card2;
  
  public function Wicky (): void {}
  Make a list of card numbers
  var cardlist:Array = new Array();
  for (var i: uint = 0; i < boardWidth * boardHeight; i ++) {}
  CARDLIST.push (i);
  
  }
  
  var cardlist1:Array = new Array();
  for (var j: uint = 0; i < boardWidth * boardHeight; j ++) {}
  CARDLIST.push (j);
  
  }
  
  create all the maps, their position and assign a randomcard to each
  for (var x: uint = 0; x < boardWidth; x ++) {/ / horizontal}
  for (var y: uint = 0; y < boardHeight; y ++) {/ / vertical}
  var c:Card = new Card(); copy the clip
  c.Stop (); stop on the first frame
  
  var r: uint = Math.floor (Math.random () * cardlist.length); get a random face
  c.cardface = cardlist [r]; assign to the map
  CARDLIST.splice (r, 1); Remove the face of list
  c.addEventListener (MouseEvent.CLICK, clickCard); have it listen to the clicks
  addChild (c); Show the map
  
  create all the maps, their position and assign a randomcard to each
  
  var b:Card2 = new Card2(); copy the clip
  b.Stop (); stop on the first frame
  
  var s:uint = Math.floor (Math.random () * cardlist1.length); get a random face
  b.cardface = cardlist1 [s]; assign to the map
  cardlist1.splice (s, 1); Remove the face of list
  b.addEventListener (MouseEvent.CLICK, clickCard); have it listen to the clicks
  b.x = 200
  b.y = 200
  addChild (b); Show the map
  
  This function is called when the mouse button is pressed.
  function startDragging(event:MouseEvent):void
  {
  event.currentTarget.startDrag ();
  }

  This function is called when the mouse button is released.
  function stopDragging(event:MouseEvent):void
  {
  event.currentTarget.stopDrag ();
  }

  c.addEventListener (MouseEvent.MOUSE_DOWN, startDragging);
  c.addEventListener (MouseEvent.MOUSE_UP, stopDragging);
  b.addEventListener (MouseEvent.MOUSE_DOWN, startDragging);
  b.addEventListener (MouseEvent.MOUSE_UP, stopDragging);
  
  }
  }
  }
  
  clicking on a card reader
  public void clickCard(event:MouseEvent) {}
  var thisCard:Card = (event.target as card); What card?
  firstCard = thisCard; I have note
  firstCard.gotoAndStop(thisCard.cardface+2); Return it
  
  }
  
  public void clickCard1(event:MouseEvent) {}
  var thatCard:Card2 = (event.target as Card2); What card?
  thirdCard = thatCard; I have note
  thirdCard.gotoAndStop(thatCard.cardface+2); Return it
  
  }
  }
  }

  Try this one:

  package {
       import flash.display.*;
       import flash.events.*;
  
       public class Wicky extends MovieClip {
            // game constants
            private static const DECK_LEFT:String = "deckLeft";
            private static const DECK_RIGHT:String = "deckRight";
            private static const boardWidth:uint = 7;
            private static const boardHeight:uint = 7;
            private static const boardOffsetX:Number = 120;
            private static const boardOffsetY:Number = 45;
            private var firstCard:Card;
            private var secondCard:Card;
            private var thirdCard:Card2;
            private var fourthCard:Card2;
            private var cardDeckLeft:Sprite;
            private var cardDeckRight:Sprite;
  
            public function Wicky() {
                 if (stage) init();
                 else addEventListener(Event.ADDED_TO_STAGE, init);
            }
  
            private function init(e:Event = null):void
            {
                 removeEventListener(Event.ADDED_TO_STAGE, init);
                 cardDeckLeft = makeDeck(DECK_LEFT);
                 cardDeckRight = makeDeck(DECK_RIGHT);
  
                 addChild(cardDeckLeft);
                 addChild(cardDeckRight);
  
                 cardDeckRight.x = cardDeckRight.y = 200;
  
            }
  
            private function makeDeck(deckName:String):Sprite {
                 var container:Sprite = new Sprite();
                 var cardCollection:Array = [];
                 var j:int = 0;
                 var i:int = 0;
                 for (i = 0; i < boardWidth * boardHeight; i++) {
                      cardCollection.push(i);
                 }
                 var c:MovieClip;
                 var r:int = 0;
                 for (i = 0; i < boardWidth; i++) { // horizontal
                      for (j = 0; j < boardHeight; j++) { // vertical
                           c = deckName == DECK_LEFT ? new Card() : new Card2(); // copy the movie clip
                           c.stop(); // stop on first frame
                           r = Math.floor(Math.random() * cardCollection.length); // get a random face
                           c.cardface = cardCollection[r]; // assign face to card
                           c.deckName = deckName;
                           cardCollection.splice(r, 1); // remove face from list
                           c.addEventListener(MouseEvent.CLICK, clickCard); // have it listen for clicks
                           c.addEventListener(MouseEvent.MOUSE_DOWN, startDragging);
                           container.addChild(c); // show the card
                      }
                 }
  
                 return container;
            }
  
            // player clicked on a card
            private function clickCard(e:MouseEvent) {
                 var target:MovieClip = e.currentTarget as MovieClip;
                 // do different things based on what deck card belongs to
                 if (target is Card) firstCard = target as Card;
                 else thirdCard = target as Card2;
                 target.gotoAndStop(target.cardface + 2); // turn it over
            }
  
            // This function is called when the mouse button is pressed.
            private function startDragging(e:MouseEvent):void
            {
                 e.currentTarget.startDrag();
                 stage.addEventListener(MouseEvent.MOUSE_UP, stopDragging);
            }
            // This function is called when the mouse button is released.
            private function stopDragging(e:MouseEvent):void
            {
                 stopDrag();
                 stage.removeEventListener(MouseEvent.MOUSE_UP, stopDragging);
            }
       }
  }
  

• Whenever I start several games full screen, I get a message saying "OUT OF RANGE"

  The games I tried to play are:
  Spore,
  MapleStory

  Hello qwertyuiopasdfghjklzxcvbnmqwertyuiop,

  Thank you for your message.  Click HERE for more information about your problem and troubleshooting to help correct this problem.  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• VGA voltage error message is out motherboard safe voltage 12,0

  I turned on my computer after a few days and received a message flashing in red on the advice of doctors from Asus. saying: VGA tension is off safe bound motherboard 12.0? I have no idea what it means that someone can tell me how to solve this problem

  Hello

  ·         What is the brand and model of your computer?

  ·         Using a laptop or desktop?

  Try reinstalling the Asus Smart doctor and check if it works. I searched and it looks like it happened with the software before.

  I also suggest you to optimize your computer and check if that helps.

  http://Windows.Microsoft.com/en-in/Windows-Vista/optimize-Windows-Vista-for-better-performance

  Also try to contact the computer manufacturer for assistance.

  Hope this helps,

• randomly out of range?

  I have a hp 6200 pro, core i3

  I have the computer attached to a 42 "sanyo lcd tv, the picture is superb, but from time to time when the resumption of the fashion watch, I'll get a pc off error, reset the pc to sleep corrects most of the time there.

  I would like to know how to solve this problem, because it is a little distracting.

  current setting is @60 1920 x 1080 p hz

  Hello

  It may be possible that the video adapter to update the screen setting is incompatible with your new monitor. I'll be you providing an article that has a possible resolution to your question.

  New monitor shows garbled display or an Error Message "Signal out of range" when computer starts

  Let us know if it helps.

• How can I get rid of frequency is out of range warning on my VPL-HS60 projector?

  I recently changed the lamp on my projector and when I turned it back on, I received this warning and now I don't have any picture (sound is ok). All the elements are connected with HDMI (receiver, set-top Blu - ray player cable Charter and projector). Prior to that, everything worked fine (only changed / bulb of the lamp).

  I also put the old bulb back in and it still does not work (as I suspected).

  One thing I noticed in troubleshooting, it is that I can not change the image or Signal settings on my projector. He said that it is not available (not sure if it was this way before I changed the bulb).

  Can someone help me with this?

  Thank you!

  I no longer get the "frequency out of range" warning (I got that fixed - I don't know how but I fixed it before see and try your suggestions).

  So now I can watch the cable TV with cable box set to 1080i. However, I can still watch all the movies of my Blu - ray player (again this used to work fine) - no image is displayed. I tried to adjust the video output from the blu - ray player at 1080i and 720 p with the 1080/24 p output BD ROM set to Auto or off function and it still does not (sound is ok).

  Any ideas or suggestions? Thank you!

• input out of range with HDMI to VGA LE1901w

  Hello!

  Recently, I acquired a LE1901w monitor as a second screen. I'm trying to connect it to my Toshiba u925 using adapters HDMI / VGA (because neither the monitor has an HDMI port, or the laptop has a VGA output).

  I get the message "input out of range signal" requesting a change to 1440 x 920 @ 60 Hz and continues to display until the monitor going to sleep even when I change the settings according to demand.

  I have an integrated Intel HD Graphics 4000 and I use the default Windows for Windows 8.1 monitor drivers

  Any comments will be useful

  Thank you

  Hello @fbinim,

  I understand that you get the message "Input Signal Out Of Range" and it asks you to change at 1440 x 920 @ 60 Hz. I suspect it's a driver problem and you need to make sure that your drivers are up to date on your computer. Just to be safe, I recommend if you could to move the HP LE1901W monitor to another computer and make sure you do not have the problem. If you have it on a different computer the problem you are experiencing seems to be a physical problem. Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html.

  I want to thank you for display on the HP Forums. Have a great day!

• Hi, I'm out of range signal. I'm no computer expert. Can someone answer step by step approach to solve this problem.

  I have a problem with my computer system. When I run the normal mode, winows xp screen opens computer start loading, the screen goes black then message comes out of range signal. How do I solve this problem

  Did you change something, like new monitor or something. Refresh rate has maybe been set too high.

  You will need to start safe mode by pressing F8 in the boot of the computer. You then need to check/adjust the refresh rate by right click on the desktop background, and then click Properties-> settings-> Advanced-> monitor - > "Check - Hide modes that this monitor cannot display", then select the screen refresh rate in the left/available ones. Then click on apply and then your computer may restart.

  BTW - so far has caused this problem? TaurArian [MVP] 2005-2010 - Update Services