Better charging habits?

Similar Questions

• Charging "habits"?

  I read in another topic that one factor to preserve the life of the battery of the Sansa player is your "load patterns.

  What is the most effective way to charge the battery to maintain his life? A little charge often, or leave weaken, and then do a long load, or what? (Whenever I have connect the reader to my PC it at the top of the load.)

  I just bought a Sansa Fuze 4 GB (and a charger to go with it.) So far so good and I am very happy with it.

  I want to make it last as long as possible but then I'd appreciate some tips you can give me. I've already put the minimum brightness settings, 10 second backlight, etc. in 5 minute wait. I keep the volume as low as possible, also, but high EQ settings use more energy?

  Finally, can what kind of life I expect from my player? Is it possible to return the device to SanDisk for installing a new battery?

  
  

• Be a problem using a charger better?

  I'm using 2nd generation of bike g and it takes a lot of time to load. If the phone will face any problem if I use a more powerful charger?

  I suggest that you do not use any charger not manufactured by Motorola. If you need a better charger, my recommendation for you is to buy the Motorola Turbo charger. As it's Motorola, it shouldn't pose any problems with the Moto G 2nd gen. It should load much faster phone. If the G supports fast charge of Qualcomm technology, it will load even faster.

  See this link to the page:

  http://www.Motorola.com/us/accessories-batteries-chargers/Motorola-turbo-charger/Motorola-turbo-charger-PDP.html

• Using firefox 26 beta, Windows 7; Adobe flash player11 loaded, but doesn't show is not in the list or the agifts running? I tried to recharge, help etc! not

  I run Windows 7, with Firefox (beta) charged 26. Tried to play the video "Bones" on Fox homepage and you need Adobe Flash Player (AFP). Downloaded and executed/uninstalled the AFP several times; whenever it appears on my hard drive, but it does not appear on my list of Firefox ad - ons? If I then try to play a video on Fox, it warns me that AFP is not installed? I'm frustrated - I read all posts on this problem, either something is "weird" and I missed it, or I do not understand the available corrections. I have not had any problems at all with Firefox until these latest two updates? I have not been invited to support AFP up to now - the Fox network has changed their requirement of video player? I certainly remember watching videos on their website months ago... Would be to uninstall and install a fresh copy of Firefox help? I'm grabbing at straws here... Thank you

  Hello

  According to the details of your system, you have correctly installed the latest version of Flash. A clean install (and then reinstall the Flash Player) can help as you suggest. But first, I would try to clear your cookies and cache (see below). In addition, you may need to restore the last full version, Firefox 25 until this issue is resolved.

  Note: This will be you temporarily disconnect all sites, you're connected to.
  To clear the cache and cookies to do the following:

  1. Go to Firefox > history > clear recent history or (if no Firefox button is displayed) go to tools > clear recent history.
  2. Under "Time range to clear", select "all".
  3. Now, click the arrow next to details to toggle the active details list.
  4. In the list of details, see the Cache and Cookies and uncheck everything.
  5. Now click the clear now button.

  More information can be found in article to clear your cache, history, and other personal information in Firefox .

  This solve your problems? Please report to us!

  Thank you.

• All sites https fails to load with an invalid certificate

  I bought a new computer, I freshly installed 14 Firefox on Windows 7 (64-bit) and all https sites fails to load, with various failures of security certificate. Gmail, for example, does not charge for this reason:"accounts.google.com uses an invalid security certificate. The certificate is not reliable because no issuer channel was provided. »... Even after the addition of a manual control. My Bank Web site does not open because the serial number is used on another certificate... etc etc.

  I tried all the most commonly recommended solutions - cert8.db removal uninstall Firefox, creating new profiles, copy on the old PC profile, create a new profile under a new user... Nothing seems to have no effect. I tried Firefox 14 and 15 (beta), charges both installs. I tried to disable my antivirus and firewall (ESET).

  I'm out of ideas. Chrome and IE work without any problem. All other computers on the home network even behind the same router have Firefoxes that work very well.

  What security (firewall, antivirus) software do you have?

  Some security software intercepts them secure connections and sends its own certificate.

  Some examples are ESET and Bitdefender.

  • ESET setup-> Advanced Configuration-> expand web and email-> SSL shaft
  • SSL protocol: do not scan SSL protocol
  • BitDefender-> privacy-> settings disable SSL Scan

• Cannot use Wake on LAN, unless that "allow this computer to turn off the device to save power" is checked

  Wake on LAN - power management

  On my Media Center PC, I am unable to use Wake on LAN unless "allow this computer to turn off the device to save power" is checked (in the tab power management of the adapter in the Device Manager). "Allow this device to wake the computer" and 'Allow only a magic packet wake the computer' is checked, but become grayed out when "allow this computer to turn off the device...". ' is not checked.

  The problem is, Wake On Lan doesn't work unless the computer has been asleep for a short period of time. If I try to activate the computer using WOL after about 10 minutes, he never wake. I guess that's because "Allow this computer to turn off the device to save power" is checked, the machine is before turning off the network adapter.

  Is it possible to force the computer to disable the NETWORK card, but would retain the capability of WOL? Or ensure you THAT WOL works little regardless of how long the PC has been asleep?

  The machine is a Windows 7 PC with a Nvidia nforce network controller.

  By the way, I have a laptop on the same cable network that has all three items checked in the tab for its NIC device power management, and this machine can be awake at all times using WOL, regardless of how long he has been asleep, this issue must therefore be with the configuration of the Media Center computer.

  I would be really grateful for any suggestion, I spent a lot of time trying to get this to work!

  See you soon

  Hello

  If the systems are only a sleep you don't need a magic packet.

  If computers are set to wake on any network traffic all Ping or arp will wake them up.

  For this configuration, it is best to disable the saving of NIC.

  There may be some variations on where is the energy saving setting.

  Here are a few examples, YMMV, look around your systems.

  Example, http://www.ezlan.net/example/powersave.jpg

  Example, http://www.ezlan.net/Win7/power_sav_wireless..jpg

  Example, http://www.ezlan.net/Win7/power_save_win7.jpg

  Example, http://www.ezlan.net/Win7/adv_power-sav.jpg

  ----------------------------------

  Real means WOL shut down a computer on Hibernate real position, http://www.ezlan.net/WOL.html

  However as these has involved the PSU cooperation. Motherboard. Network card and are not considered critical by the industry for the user end is a YMMV situation.

  12 Desktop who are under my immediate control (mix and match brands and processors). Only three are fully compliant and properly awake.

  Three satisfied partially, the rest don't care my desires/needs of Wake on LAN.

  On the positive side, since it is now fashionable to go green, the percentage of new computers that keep the better sleep habits significantly improved.

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• Load with the incremental update of the IKM Oracle

  Hi Experts,

  According to my understanding, incremental load is that the new data (with insert append or load incremental (update/insert or merged with or without behavior SCD)).

  While peek into the code of the IKM KM here it is my understanding:

  Incremental update: given the PK defined in the target data store, that KM will check line by line and put insert/update (change data capture).

  Append: Blindly block for the table insertion target and any changed data will be captured. It will not truncate and insert so that to avoid duplicates in the data, have a PK defined in the target table, so whenever the duplicate data comes it can be prevented or go for CKMs.

  
  

  Now my doubt is,

  
  

  When you use the incremental km update: the scenario is I have an incremental load today, inserted for example 200000 files today and tomorrow other 200000 records added (may include updates of certain lines in the previous loaded 2,00,000 documents. Now it will scan 4,00,000 (yesterday + today) and seek changes, I mean to update or insert

  Because according to my understanding will treat this KM row by row all records (my understanding is correct?). If it reads each record and are looking for a change or not change it seems to me that his time and performance issues?  CDC is right approach in this scenario or the implementation of SDC on all columns in the table?

  
  

  Regarding the large number of records coming daily, updated incremental if IKM checking all records for update or insert or no change, in my opinion, this isn't a performance wise and time to compare source and target value. This KM eliminate comparing itself the Chronogram of the source to target those who does not charge any change in any of the previous column value?

  
  

  
  Sorry if this is a silly question. Just trying to figure which can be better charge strategy, especially when I have millions of records entering source daily.

  
  

  SSX I remember ealier JeromeFr our expert member in the community, said Partioned Exchange to treat only to process the given month data when you manage tables partitioned at the database level.
  

  
  

  Best regards

  ASP.
  

  
  

  
  

  
  

  
  

  
  

  
  

  
  

  Hi ASP_007,

  Charge, as opposed to full reload, does indeed only new (and possibly changed) data. There are 3 main ways to do this:

  • Set up a filter in your mapping interface/load only the data including the upper date to a variable (which holds the last loading date).
  • Use the framework of the CDC in ODI. There are several JKMs. The solution optimal is probably the Golden Gate, one, but you must purchase this additional license. mRainey wrote about this several times: http://www.rittmanmead.com/2014/05/goldengate-odi-perfect-match-12c-1/
  • Retrieve all the data in the source and allow an incremental update of the IKM define what already exists.

  Of course, the first two still will take a little more time to develop, but it will be much faster in terms of performance because you treat data less.

  It is for the part "Extract", get data from the source.

  Now, you must know how to "integrate" into your target. There are different strategies as insert Append, incremental update, Type 2 SCD...

  • Indeed insert Append won't update. It will only insert lines. It is a good approach for a full charge, or for an additional charge when you want to insert data. There is an option in most of the IKMs Append (control) to truncate the table before inserting (or delete all the lines if you do not have the privileges to truncate).
  • Incremental update: there are different IKMs for this and some may have better performance than others depending on your environment. I recommend you to try a few and see which is more fast for you. For example ' IKM Oracle incremental update (MERGE) "could be faster than 'IKM Oracle incremental update. I personally often use a slightly modified version of ' IKM Oracle incremental update (MERGE) for Exadata ' to avoid using a work table (I$ _) and perform the merge directly into the target table. The last approach works well with the CDC when you know that all data are new or changed and needs to be treated.
  • SCD2: To maintain your dimensions needing SCD2 behavior.

  So in answer to your questions:

  Because according to my understanding will treat this KM row by row all records (my understanding is correct?). If it reads each record and are looking for a change or not change it seems to me that his time and performance issues?

  Some of the IKMs will do it line by line, others will do it based on a game. This is why it is important to check what he does and he spots.

  CDC is right approach in this scenario or the implementation of SDC on all columns in the table?

  Yes certainly, you will have less data to be processed.

  Regarding the large number of records coming daily, updated incremental if IKM checking all records for update or insert or no change, in my opinion, this isn't a performance wise and time to compare source and target value. This KM eliminate comparing itself the Chronogram of the source to target those who does not charge any change in any of the previous column value?

  Yes, by using ' IKM Oracle incremental update (MERGE) for Exadata ' with the strategy of 'NONE '. This means that he will not try to see the rows from the source is already in the target.

  PS; I am remember ealier JeromeFr our expert member in the community, said Partioned Exchange to treat only to process the given month data when you manage tables partitioned at the database level.

  It is a good approach when you want to reload an entire partition (if you have a monthly charge in a monthly partition or a daily load in a daily score for example). It is easier to set up to load the new lines only. But if you need to update things in the source, you can use incremental update strategy on an intermediate table that contains the same data that your partition and then create the swap partition in a further step.

  Thanks for the mention.

  Be sure to close your other discussions.

  It will be useful.

  Kind regards

  JeromeFr

• Acer repair must taken in charge for better machines!

  I wanted to post nothing but good, because the Internet site support and the phone is outstanding.  But the machine was 3 weeks OLD when I sent... IT has been impeccable. I checked before a bubble wrapped it.

  But I got a new machine that I treated like GOLD for repairs and I got a new back with scratches and live stripped head!

  I have sent down with 2 layers of large air bubbles.  I came back without filling stuck cardboard so that he feels any shock that gets the box during shipping!  Given that the only remedy they did was reconnect a cable... (where people have found is usually not the problem) Ship without filling is a bad choice.

  Then I open it:

  (1) one of the screewheads on the docking station is BADLY Stripped.  USE THE RIGHT SIZE TOOL! GEEZE

  (2) I machine which was keept in a padded case returned with new scratches on the bottom of the keyboard docking station and a space of 2 inches of abrasion on the bottom

  (3) and little paint wear away on top. This comes to the Dock to work on it without good padding on the Workbench.

  The machine WAS 3 weeks old and I treated with care!  ITs rack for me you probably use without filling and work benches are not completed, or clean elements that could scratch the machines.

  It would take me two years to develop this level of damage on a new machine.  Its small, but I take care of my business.  I'm waiting for you also.

  Use the size of the right tool... to small Phillips screwdriver screws of RUIN.

  Cushion transport you bins move since all about machines that you use less expensive materials

  Check that screws and tools out of the workspace if you scratch machines.

  Ironically, they noted scractches surface. As if I write it... I don't get blamed. I know that there are none when I sent it.

  Site support Web has

  Phone support has

  Process of repair and speed (assuming that this correction lasts)

  Care of the machines during the REPAIR C

  Case # so you can frame tech on the use of appropriate screwdriver... [private under the leadership of life]

  Lesson... Photograph every inch of your machine before you send it for repair.

  Sorry for the problems, you have had to repair your unit. This is certainly not the experience we want customers to have with our service centers. I'll take our hand to you tender technical support team to better understand what happened during the repair and to help get your product returned to the State, it is in when you send it for service.

• Nikon D800 certainly NOT taken in charge in ACR RC 6.7 or in Photoshop CS6 with ACR 7 Beta

  It has been my experience that I am unable to view RAW images shot by my new Nikon D800 with ACR 6.7, or Photoshop CS 6 beta installed, which includes an ACR plugin 7. It is true, if I am shooting in Live View mode or not.

  Anyone else having trouble with the FIRST images filmed by the Nikon D800?

  I spoke to a Support technique Nikon.  Apparently, Nikon Transfer as a standalone application is old and obsolete. The transfer function is now included in Nikon View NX 2. They had me uninstall Nikon Transfer and use the transfer function in View NX2. Allows you to to avoid the numbering system you're used to, Jim, Nikon Transfer, it's just that it is now contained in Nikon View NX 2, latest version 2.3.1. My ships are now visible in all software, be it Photoshop, Capture One, etc. My issues are all now resolved. I'm going to give me the "right answer" annotation, but it wouldn't have happened without the discussion we had here.

• HP15-r009tx: charging or IT load, which is better to use my laptop

  to get a good performance of the laptop, choose which mode, using a load disconnect or baterry suggest that it sir

  Hey @sabretooth04,

  Thanks for the reminder on the best way to use a laptop battery. Very much appreciated.

  Thank you.

• How how to videos from youtube for better play and not load all few seconds? The video clip load and only play for two seconds and starts charging again.

  I have a toshiba laptop satellite 655.

  I have a toshiba laptop satellite 655.

  Hello

  If a YouTube video is slow to the buffering, which is a network related issue and not a system issue. See the article on reading problems: http://support.google.com/youtube/bin/answer.py?hl=en&answer=74662

  Kind regards

  Patrick

• Feature Request - better taken in charge of multiple monitors

  Using Lightroom for a second screen has certainly helped my workflow. I hope that the team will consider multiple adding more flexible monitor support in version 4. Here's why.

  I recently experimented running one of my three displays in portrait mode. When this screen welcomes the secondary display of Lightroom in the Loupe window, my vertical finally get equal real estate for editing. While I don't have hard statistics on my library, I know that more than 50% of my images is in portrait orientation.

  I would like to see LR V4 supports three or more screens, so I could be implemented as follows:

  Display 1 - main lightroom interface, would not need to be calibrated, controls and navigation

  Screen 2 - Portrait orientation, view Magnifier - this would be a calibrated screen, all develop changes to vertical markets would be judged on this screen

  Screen 3 - landscape, view Magnifier - another calibrated screen orientation, all develop changes to the horizontal would be judged on this screen

  If Adobe could improve the application smart enough to send the image to the correct screen, based on orientation (recognition and respect which could change the direction of culture) my editing sessions would certainly speed up and I could maximize the productivity of multiple screens.

  I'd be happy with that, but I am also frustrated by the need to return to the mode tag image library when my workflow main a me to develop.  Ultimately depends on the quality of the image. Before investing in specific image meta-data, I have an image in the process or at least 'test-process'. IMO the Quick Develop panel serves to nothing, as soon as you are used to the granular control of cursors, it just don't cut it.

  In the three configuration monitor I described above I would like to be able to configure the screen 1, with a combination of library panels and to the point, so I could stay "develop centered on" immediate access to Keywords and meta. Two additional screens would intelligently deal with the display of images.

  I think this could speed up my workflow of 33% and who has just returned from a Tour of France project that generated 23 000 images I need the help of productivity, that I can get.

  + 1,000,000 votes.

  1 for me; 999 999 for people who have it also but just not yet.

  Optimization for a workflow based on multiple monitors would be great - interface with lib + dev panels on a monitor, an edict of fullscreen on another one (or two) would be great.

  I think if I had three monitors can I want even a set of panels aligned right on the left screen, a set of aligned left on the right screen and the picture being developed in the monitor of the centre - which I could turn to taste according to proportions cropped, if I was in the mood.

  R

• Is it true that only charge your iphone at 100% can shorten its battery life?

  Because some say it may decrease the battery life if you always or often recharge your iphone to 100%. They said that it is better not to load it 100%, and some have said it's ok to charge your phone to 100%.

  your phone/ipad/computer laptop/ipod is designed to be loaded until it reaches capacity. That's what it is designed by engineers. Then no. Tell the 'they' who says 'it is better do not reach' 04:20 occurs only twice a day and they have to keep it up to two times per day to book all the cells of the brain are left in hiding.

• iPad charging problem

  I have a slight problem because whenever I connect my iPad to my MacBook. The charge indicator will start to blink continuously between the load and do not load. My iPad is on iOS 10 beta also and my iPad charges with the normal load brick in the wall without problem. Any help appreciated.

  Alex

  At best, the iPad will get only a charge of maintenance by the usb port and will take a long time to load. The off / / indicator means he needs more power than the usb port can provide. Use the wall charger.

  If this started after you installed the beta version operating system, we cannot discuss beta programs here. You must take this in the developer community.

  Good day.

• Uninstalling the beta program of iOS 10

  My son has stupidly installed the iOS beta 10 on his iPad which is at the origin of the problems of charge and wifi. How can I uninstall it and go back to iOS current 9 without him losing his data? Thanks a lot to andvance!

  Which cannot really be discussed here. He agreed to that in the framework to install.

  Any software beta iOS - Apple Support