"Core security check failed" and the computer hang when I plug the USB mouse

Similar Questions

• My touchpad does not work and the usb mouse works

  After connecting with a USB key, my touchpad does not work and the USB mouse works

  Hi, Dieudonné,

  Make and model of computer?

  Have you tried to uninstall the drivers for the touchpad.  Update?

• My vista computer hangs when I right click on the screen and scroll again.

  My vista computer hangs when I right click on the screen and scroll again.  I guess it's a problem with the windows Explorer.  I ran virus and malware scan and also led the sfc.  I always get the same result.  If anyone has faced this problem and knows the Fox please help

  It could be a problem with the shell extensions.
  Check out these links to see if they might be able to help:

  Make a right-click is slow or weird behavior caused by context menus managers

  and

  ShellExView - Shell Extension Manager for Windows

• Pagefile.sys has completely disappeared. It started when the power failed and my computer crashed.

  My pagefile.sys has completely disappeared. This all started when the power failed and my computer crashed.
  I get the message that he was away, I went to the performance and settings and tried to change custom settings & re-start.

  No matter what I do, nothing works. I lost several hours of visiting sites for tips and nothing seems to help.

  I was told when re-boots WinXP it creates the new file pagefile.sys and I should delete the pagefile.sys file may be corrupted on the C drive.

  So I put the folders to show hidden files and delete pagefile.sys. I have re-set and tried to recover with no success.

  There is now absolutely no pagefile.sys on my C drive. Anyone know how I can get back my pagefile.sys?

  I want to get my virtual memory works again?

  Thank you very much in advance!

  I'd start first with the chkdsk/r.

  Don't forget - if you have a factory installed recovery Partition, fixmbr will scan it as the Master Boot Record that written XP will equal not the MBR installed by the factory, so first run chkdsk /r (did I say that already)?

  Here are some instructions:

  http://pcsupport.about.com/od/fixtheproblem/SS/RCONSOLE.htm

  Where people have no XP bootable media, here are my instructions:

  If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.

  This is not the same as recovery disks that might have come with the acquisition of the system store.

  You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.

  The ISO bootable image file you need to download is called:

  xp_rec_con. ISO

  Download the ISO from here:

  http://www.mediafire.com/?ueyyzfymmig

  Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:

  http://www.ImgBurn.com/

  When you install ImgBurn, DO NOT install the Ask toolbar.

  Here are some instructions for ImgBurn:

  http://Forum.ImgBurn.com/index.php?showtopic=61

  It would be a good idea to test your bootable CD on a computer running.

  You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive.  These adjustments are made before Windows tries to load.  If you miss it, you will need to restart the system again.

  When you start on the CD, follow the instructions:

  Press any key to boot from CD...

  Installing Windows... going to pronounce.

  Press 'R' to enter the Recovery Console.

  Select the installation that you want to access (usually 1: C:\WINDOWS)

  You may be asked to enter the password (usually empty).

  You should be in the folder C:\WINDOWS.  It's the same as the

  C:\Windows folder that you see in Solution Explorer.

  The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.

  For a list of the commands in the Recovery Console, type help at the prompt of commands or read on here XP Recovery Console:

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/recovery_console_cmds.mspx?mfr=true

  A good idea before you start things must first verify the integrity of your file system by using the chkdsk command.

  In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.

  Running chkdsk is fine, even if he finds no problem.  It won't hurt anything to run it.

  Assuming your boot drive is C, run the following command:

  CHKDSK C: /r

  Let chkdsk finish to correct the problems, he could find.

  It may take a long time for chkdsk complete or they seem to be "stuck".  Be patient.  If the HARD drive led blinks always, chkdsk is something.  Keep an eye on the amount of the percentage to be sure that it is still making progress.  It may even seem to go back sometime.

  You must run chkdsk/r again until it finds no error to correct.

  Remove the CD, and then type "exit" to exit the RC and restart the computer.

  You have not to set the BIOS to boot the disk HARD since the CD won't be.

• NEED HELP WITH SERVICE PACK 3. After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. ,

  NEED HELP WITH SERVICE PACK 3.  After downloading and the computer goes into rebooting mode I get the screen to restart with three options, network security safe mode and the other thing. , but it of although he gets, he keeps countdown to restart and reboots and restarts, over and over again, never reboots, same screen. my computer won't let me out this screen even after I turned off the computer and turn it back on, I get the same screen. the only way I can get out of this is to erase my computer everything and bring it back to factory, right out of the box, this big headaches. Thanks for anyone who can help me. PS. Keep the answers in simple terms please.

  Hi BSRC$, in stock

  1. You have security software installed on the computer?
  2. You receive an error message when you restart the computer?

  Reinstalling Windows XP to the factory setting would not be the first option.

  It is possible that some third-party programs or the services installed on the computer interfere with the installation of service pack 3.

  I suggest that you try to uninstall service pack 3 from the computer by using the recovery console and subsequently ask the article below for what to do before installing the service pack 3on the computer.

  How to remove Windows XP Service Pack 3 from your computer

  http://support.Microsoft.com/kb/950249

  Steps to take before you install Windows XP Service Pack 3

  http://support.Microsoft.com/kb/950717

• My Windows telling me that he needs 11 updates. These updates consistently fail and the Microsoft fix did not work. Error codes are 641 and 80070641

  My Windows telling me that he needs 11 updates.  These consistenly updates fail and the Microsoft fix did not work.  Error codes are 641 and 80070641.

  Hello

  Did you change your computer before this problem?

  You can follow the suggestions and check out them.

  Method 1

  You can follow the procedure in the article.

  How to resolve problems connecting to Windows Update or Microsoft Update

  http://support.Microsoft.com/kb/818018

  Method 2

  You can reset the Windows Update components.

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.
  Back up the registry
  http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Method 3

  You can download and run the system update readiness tool.

  Description of the update tool of the system to Windows Vista, Windows Server 2008, Windows Server 2008 R2
  http://support.Microsoft.com/kb/947821

  Method 4

  Step 1:

  Place the computer in a clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Step 2:

  You can manually download and install updates from Microsoft Download Center.

  Microsoft Download Center

  http://www.Microsoft.com/downloads/en/default.aspx

  Method 5

  You can disable temporary of your security software.

  Disable the antivirus software

  http://Windows.Microsoft.com/en-us/Windows-Vista/disable-antivirus-software

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks

  See also:

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

• Core security check failure blue screen on Windows 8

  Whenever I'm playing games such as sometime V or even just browse the internet or Watch youtube my computer hangs and has a blue screen saying kernel security check failure and my pc restarts. She often does. Is there a way to fix this?

  KH

  First of all, you need to upgrade to win 8.1 as in itself, it may solve the problem

  These related to the MRVW24C.sys Device driver for Marvell NIC of Marvell Semiconductor 802.11n your 2007

  Completely, remove the current (or software) driver and install the latest driver available.  For instructions on how to do read everything to update the drivers of my partner JMH3143 http://answers.microsoft.com/en-us/windows/wiki/windows_other-hardware/updating-a-driver/a5e6345e-af9b-4099-bef0-8d22254aa1c1?tm=1436753520149 here

• Windows 8 core security check failure... help please...

  I have an ASUS X502C with windows 8, I try to install and run the WinTV - HVR-900H tv t hybrid. Whenever I have try adjusting the handle of the computer displays a blue screen with the kernel security check failed.

  I had the computer controlled by the store that say that there is nothing wrong with the laptop. I was in contact with the WinTv Hauppauge company several times and done every thing they suggested for a free installation of error, but I am having no joy.
  Any ideas of what to do next? any help would be graciously received, thank you.

  Good looking

  The files were perfect and the solution is not too expensive.

  These were related to 3 things combining to produce the accident.

  1 - Aicharger.  Associated with the driver ASUS AiCharger.sys from ASUSTek Computer Inc. charger.

  2 - about the hcw66x64.sys Hauppauge WinTV HVR-900-Stick of Hauppauge Computer Works, Inc.

  These two are the USBXHCI. SYS accident (XHCI Microsoft Corporation USB driver)

  I would like to delete Aicharger (you can change the devices using USB only), update the driver for the Hauppauge Win - TV (I suspect it is the real cause of the accident) as yours is almost 3 years old.

  After the two above if you continue to crash, I would run a check of system files to check the USBXHCI. SYS driver.

  Please run a check of system files (SFC) 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• I get an error screen every time I plug my USB mouse on my laptop and get wat "kernel Security Check Failure.

  I just bought a DELL laptop and nothing happened in the first week of a few... And then now when I plug a 'what' USB device that is wat it appear kernel security check failure, and I was running window 8 too...

  Here the Minidump files... :D
  https://SkyDrive.live.com/redir?RESID=7526244054DEF000! 225 & authkey =! AHHbZvIw4HldflA

  OK, the NMgamingms.sys was probably installed via Windows Update.

  You can try the following:

  Open the Manager of devices, and then with the right button of the mouse optical USB > select uninstall and select "Delete the driver for this device" > OK > continue with uninstallation

  Restart the computer and let Windows detect again the mouse.

• Why I can't update windows and fail. and the error is 0x8007001F

  Why I can't update windows and fail. and the error is 0x8007001F

  How to reset the Windows Update settings?
  http://support.Microsoft.com/kb/971058

  and/or

  Claire on your temporary internet cache.

  and/or

  Rename the folder C:\Windows\SoftwareDistribution

  Click Start, choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click on stop.
  Stopping the service will take a moment.

  Rename the folder "C:\Windows\SoftwareDistribution":
  a. Click Start, click Run, type %any and then click OK.
  b. right-click on the C:\Windows\SoftwareDistribution folder, and then click Rename.
  c. Type SoftwareDistribution.old, and then press ENTER to rename this folder.

  Click Start. Choose run.
  In the run box, type services.msc.
  Click OK.
  Right-click the automatic updates service.
  Click Start.
  Starting the service will take a moment.

  Restart if necessary and try and update again.

  You will notice that you will lose your history of updates, but it's not important.

  If everything works well again, you can delete the old renamed folder.

• Computer hangs when you try to watch live TV through windows media centre__

  Computer hangs when you try to watch live TV via windows media Center
   
   
   
  Signature of the problem:
  Problem event name: BlueScreen
  The system version: 6.0.6001.2.1.0.768.3
  Locale ID: 3081
  More information about the problem:
  BCCode: a
  BCP1: FFFFFA600C193FF8
  BCP2: 0000000000000002
  BCP3: 0000000000000001
  BCP4: FFFFF8000233499E
  OS version: 6_0_6001
  Service Pack: 1_0
  Product: 768_1
  Files helping to describe the problem:
  C:\Windows\Minidump\Mini112509-01.dmp
  C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
  C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
  Read our privacy statement:
  http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409
  

  Hi Eddie Hunt

  Welcome to the Microsoft Answers Forum!

  I suggest you try this method and check if it is helpful

  Method 1:

  Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to run check and clean boot if you have the problem.

  i. Click Start, type msconfig in the search box and press ENTER.

  II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.

  III. in the general tab, click Selective startup.

  IV. under Selective startup, clear the check box load startup items.

  v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.

  VI. click OK.

  VII. When you are prompted, click on restart.

  VIII. after the computer starts, check if the problem is resolved.

  If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:

  Clean boot

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  i. Click Start, type msconfig.exe in the start search box and press ENTER.

  II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.

  III. on the general tab, click the Normal startup option and then click OK.

  IV. When you are prompted to restart the computer, click on restart.

  Method 2:

  Install the latest codec package and check if that helps, link below will help you with the same:

  http://www.Microsoft.com/downloads/details.aspx?FamilyId=06fcaab7-DCC9-466B-b0c4-04db144bb601&displaylang=en

  Method 3:

  Update the graphics card. Steps to update the graphics card:

  i. click on start, type devmgmt.msc and then on enter.

  II. develop the graphics card and right click on the sub element and click on update driver.

  Link for reference: problems with watching TV on your computer

  Thank you, and in what concerns:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Computer hangs when I click on view full map

  My computer hangs when I click on view full map.

  Hello
  1. in using what application are you experiencing this problem?
  2 you referring to maps available online?
  3 are you aware of any changes made to the computer, before the show?
  Please reply to us with more information, so that we can better help you.

• Laptop does not recognize the usb mouse or the internal speakers.

  The laptop does not recognize the USB mouse. I have re installed the drivers from the site of the constructor (HP), but it still does not work.

  In addition, the internal Laptop speakers no longer work. There is no sound coming out of the laptop and it does not recognize the external headphones plugged into the headphone jack.

  I ran several troubleshooting utilities (audio playback, FixIt) and they are no help.

  Hello

  Thank you for keeping us posted.

  Sorry for the late reply.

  I imagine the inconvenience that you are experiencing. However, I appreciate your efforts to resolve the issue.

  I would suggest trying the following methods and check if it helps.

  Method 1:

  How to use the tool File Checker system to repair missing or corrupted system files,

  Please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how to run the system (SFC.exe) to File Checker tool analyzes your system files and to repair the system missing or corrupt files in Windows or Windows 8 8.1. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 2

  Method 2:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.   

       

  If the problem persists, follow method 3

  Method 3:

  I suggest you try the steps from the following link and check if it works.

  No sound in Windows.

  http://Windows.Microsoft.com/en-us/Windows/no-sound-help#no-sound=Windows-8&V1H=win8tab4&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  For the problem with the USB mouse, there could be a possibility that there is a conflict of material with the mouse.

  I suggest you to try some other USB mouse with the laptop and check if it works.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

• Impossible to install the USB/mouse driver

  I recently was unable to use my external mouse. Similarly, I was unable to use USB keys.

  Whenever I plug in a 'sound' in the registers of the computer as a USB is detected, but the driver cannot be installed.

  In Device Manager", the USB/mouse device appears with a yellow exclamation point, which specifies that it is Error 52 - cannot verify the digital signature.

  I tried to use 'Device Manager' to uninstall and reinstall, but without success. Similarly, I tried the 'Microsoft Fix it' program ' with similar results.

  The computer is running Windows 7 with a 64-bit operating system.

  Any help would be greatly appreciated!

  James

  Hi James,

  1. what fixit from microsoft that you ran on the computer?
  2. What is the brand and model of the mouse?
  3 did you do changes on the computer before the show?

  Code 52 says, Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52)

  See the article for more information.

  Error codes in the Device Manager in Windows
  http://support.Microsoft.com/kb/310123/en-us

  I would like you see below and follow the suggestions in the article.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  What to do when a device is not installed correctly
  http://Windows.Microsoft.com/en-CA/Windows7/what-to-do-when-a-device-isn ' t-installed-correctly

  Additional information:

  Please refer to the suggestions of Gokul T answered the 10 March 2010

  Error code 52 - USB ports not recognizing not connected USB devices, declaring that "Windows cannot verify the digital signature for the drivers required for this device.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/error-code-52-USB-ports-not-recognizing-connected/2379017c-D513-478C-A184-0d1b7cd408b2

  Registry warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  How to back up and restore the registry in Windows
  http://support.Microsoft.com/kb/322756/

  I hope this helps to solve the problem. Please come back for any clarification on this or any issue of Windows. We will be happy to help you.

• Software BlackBerry mix conflict with the USB mouse

  I installed Blend and had no problems.  It does not connect while the USB mouse is connected to the computer.  If I disconnect the mouse, then mix will connect to my passport.  IT remains connected and happy until I have plug in a USB mouse.  At that time it disconnects immediately.

  The computer is a laptop with touchpad.  A mouse shows the same question.

  You have the opportunity to try another USB cable?

  I had a similar experience with my eReader and it turns out my USB cable was the source of the problem.