"bgp as path bestpath ignores" in 1006 ASR
Hi all
I want to configure BGP to ignore as the path for the best choice of path to the router ASR 1006. But in BGP configuration mode, this isn't the option as path access list. It's showing as unrecognized command.
RTR1(config-router)#bgp bestpath ?
compare-routerid Compare router-id for identical EBGP paths
cost-community cost community
igp-metric igp metric
med MED attribute
prefix-validate Prefix origin validation
RTR1(config-router)#
IOS version details are:
RTR1#sh ver
Cisco IOS Software, IOS-XE Software (X86_64_LINUX_IOSD-ADVENTERPRISEK9-M), Version 15.2(4)
S, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2012 by Cisco Systems, Inc.
Compiled Mon 23-Jul-12 20:02 by mcpre
IOS XE Version: 03.07.00.S
Cisco IOS-XE software, Copyright (c) 2005-2012 by cisco Systems, Inc.
All rights reserved. Certain components of Cisco IOS-XE software are
licensed under the GNU General Public License ("GPL") Version 2.0. The
software code licensed under GPL Version 2.0 is free software that comes
with ABSOLUTELY NO WARRANTY. You can redistribute and/or modify such
GPL code under the terms of GPL Version 2.0. For more details, see the
documentation or "License Notice" file accompanying the IOS-XE software,
or the applicable URL provided on the flyer accompanying the IOS-XE
software.
ROM: IOS-XE ROMMON
RTR1 uptime is 31 weeks, 17 hours, 51 minutes
Uptime for this control processor is 31 weeks, 17 hours, 53 minutes
System returned to ROM by reload
System restarted at 23:29:29 IST Sat Apr 6 2013
System image file is "bootflash:/asr1000rp2-adventerprisek9.03.07.00.S.152-4.S.bin"
Last reload reason: PowerOn
Any help would be appreciated.
Thanks to all in advance
Irfan,
The command can be hidden, but maybe it can be accepted if you type in its entirety. See here, this is a 2691 12.4 (15) T13 IOS:
R1(config)#router bgp 1
R1(config-router)#bgp bestpath ?
compare-routerid Compare router-id for identical EBGP paths
cost-community cost community
med MED attribute
R1(config-router)#bgp bestpath as-path ?
% Unrecognized command
R1(config-router)#bgp bestpath as-path ignore ?
% Unrecognized command
R1(config-router)#bgp bestpath as-path ignore
R1(config-router)#do show run | sec router bgp
router bgp 1
no synchronization
bgp log-neighbor-changes
bgp bestpath as-path ignore
no auto-summary
Best regards
Peter
Tags: Cisco Network
Similar Questions
-
Question about BGP best path selection (LOCAL)
Hi Sir,
Out of BGP table which I stumbled upon a book is attached. There is a prefix of the table with two paths.
I noticed that the LOCAL_PREF attribute is not displayed for the routes recorded via eBGP. My understanding of LOCAL_PREF is that it is configured locally on the router and only exchanged within the same as with the other speakers.
Someone can say, what criteria does BGP uses to select the best path for prefix 172.18.0.0? He chooses the iBGP route (jump according to 172.30.255.150). In my opinion, it uses the LOCAL_PREF attribute.
I read that the 'Best BGP' document path selection algorithm this path without LOCAL_PREF is considered as having the value set with the command 'default local-preference bgp' or 100 by default. So in my case, BGP compares 300 LOCAL_PREF (via 172.30.255.150) against 100 LOCAL_PREF (via 10.100.83.1).
Please correct me if I got a bad concept.
Thank you.
B.Rgds,
Lim TS
You are right. The internal path (local-pref 300) wins over the external path (local-pref 100) due to its higher local preference.
Hope this helps,
-
Hello guys,.
Today at awkward work something caught my attention.
The situation returns to BGP, when I run the command sh ip bgp, the output gives me this:
RT52162 #sh ip bgp
Version of BGP table is 56, local router ID is 10.10.0.16
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incompleteNetwork Next Hop path metrics LocPrf weight
* 0.0.0.0 172. **. 161 50 0 15 * 15 * 5 5 65010?
*> 172.**.***.169 0 15**5 65010 ?
*> 10.**.0.16/32 0.0.0.0 0 32768 ?
*> 10.**.0.0/16 0.0.0.0 0 32768 ?The part "BOLD" of the output is exactly the same thing, and this connection works on ATM.
I can't understand this question, so if someone could explain to me why this is happening or how can we solve it, I have other sites configured the with the same configuration and it gives me the same exact result.
Hello
The nearby 172.xxx.xxx.161 done AS_PATH adding by adding at the beginning of his time number one DID when advertising the default route so it is considered to be a neighbor of backup.
Concerning
Alain
-
Cisco ASR9006 bgp always inactive
Hello
I can try to configure asr 9006 for bgp, but I still see the inactive bgp neighbors. My logs configrations and asr are below. What can I do? Could you advice me please.
ASR 9006 router Config:
!
Accept-All route-policy
Pass
end-policy
!
router bgp 100
BGP - router id 192.168.96.92
ipv4 unicast address family
!
family of ipv6 unicast addresses
!
neighbour 192.168.96.4
distance-100
update-source MgmtEth0/RSP0/CPU0/0
ipv4 unicast address family
Route-policy Accept-all in
Route-policy Accept-All out
!
family of ipv6 unicast addresses
!
!
!
RP/RSP1/0/CPU0: #sh bgp summary
Thu Jun 19 21:08:40.414 GMT
Local router BGP 192.168.96.92 identifier UNDER number 100
Generic analysis interval 60 dry BGP.
BGP table status: Active
Table ID: version 0xe0000000 RD: 0
BGP table 1 main routing version
Interval analysis BGP dry 60
BGP runs in STAND-ALONE mode.
Process RcvTblVer name/DRI LabelVer ImportVer SendTblVer StandbyVer
Speaker 1 0 0 1 0 0
Neighbor Spk AS MsgRcvd MsgSent TblVer InQ OutQ high-low St/PfxRcd
192.168.96.4 0 100 0 0 0 0 0 00:00:00 Idle
RP/RSP1/0/CPU0: #.
debugging BGP
Debug bgp io
debugging BGP
Debug bgp events
term Lun
RP/0/RSP0 / CPU0:Jun 19 21:15:01.746: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:01.808: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:12.830: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:15:12.830: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:12.830: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:12.831: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:15:14.941: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:14.941: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:14.941: bgp [1039]: [IOTC]: open to 30 s delayed 192.168.96.4 (open controls failed)
RP/0/RSP0 / CPU0:Jun 19 21:15:16.748: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:16.810: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:27.167: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:15:27.167: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:27.167: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:27.168: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP0 / CPU0:Jun 19 21:15:31.750: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:31.812: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:41.503: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:15:41.504: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:41.504: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:41.504: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:15:41.544: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:41.544: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:41.544: bgp [1039]: [IOTC]: open to 30 s delayed 192.168.96.4 (open controls failed)
RP/0/RSP0 / CPU0:Jun 19 21:15:46.752: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:46.814: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:15:49.696: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:15:49.696: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:49.696: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:49.696: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:15:55.840: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:15:55.841: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:15:55.841: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:15:55.841: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP0 / CPU0:Jun 19 21:16:01.754: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:01.816: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:06.933: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:06.933: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:06.933: bgp [1039]: [IOTC]: open to 30 s delayed 192.168.96.4 (open controls failed)
RP/0/RSP1 / CPU0:Jun 19 21:16:08.133: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:08.133: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:08.133: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:08.133: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP0 / CPU0:Jun 19 21:16:16.756: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:16.817: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:20.420: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:20.421: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:20.421: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:20.421: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:16:27.589: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:27.590: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:27.590: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:27.590: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:16:29.100: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:29.100: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:29.100: bgp [1039]: [IOTC]: open to 30 s delayed 192.168.96.4 (open controls failed)
RP/0/RSP0 / CPU0:Jun 19 21:16:31.758: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:31.819: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:35.781: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:35.781: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:35.782: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:35.782: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP0 / CPU0:Jun 19 21:16:46.760: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:46.821: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:16:49.094: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:49.094: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:49.094: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:49.094: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:16:50.278: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:50.278: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:50.278: bgp [1039]: [IOTC]: open to 30 s delayed 192.168.96.4 (open controls failed)
RP/0/RSP1 / CPU0:Jun 19 21:16:58.310: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:16:58.310: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:16:58.310: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:16:58.311: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP0 / CPU0:Jun 19 21:17:01.762: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:17:01.823: bgp [1039]: [iowt]: bgp_io_write_nbr_ver_timer_process: nbr_ver_timer Manager: empty ilist! : Return...
RP/0/RSP1 / CPU0:Jun 19 21:17:05.478: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:17:05.479: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:17:05.479: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:17:05.479: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
RP/0/RSP1 / CPU0:Jun 19 21:17:13.670: bgp [1039]: [IOTC]: context of adjustment (0x5052a768) for FD 89
RP/0/RSP1 / CPU0:Jun 19 21:17:13.671: bgp [1039]: [IOTC]: using local addr 192.168.96.92 for nbr 192.168.96.4
RP/0/RSP1 / CPU0:Jun 19 21:17:13.671: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "no ipv6 addr gbl.
RP/0/RSP1 / CPU0:Jun 19 21:17:13.671: bgp [1039]: [IOTC]: Passive open of rejected 192.168.96.4: open the controls failed
Cisco 7206 router configuration:
!
router bgp 100
BGP - router id 192.168.96.4
no synchronization
The log-neighbor BGP-changes
neighbour 192.168.96.92 distance-100
neighbor 192.168.96.92 update-source GigabitEthernet0/1.1
No Auto-resume
!
7206VXR_G2 #sh ip bgp
7206VXR_G2 #sh ip bgp sum
7206VXR_G2 #sh ip bgp summary
Local router BGP 192.168.96.4 identifier UNDER number 100
BGP table version is 1, 1 main routing table version
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
192.168.96.92 4 100 0 0 0 0 0 never slowed
7206VXR_G2 #.
Hi Umit,
It is good that you have debugs attached:
RP/0/RSP1 / CPU0:Jun 19 21:17:13.671: bgp [1039]: [IOTC]: open verification failed for 192.168.96.4 - "No ipv6 address of gbl.
You need an IPv6 address on the interface of "family of ipv6 unicast addresses" peering - otherwise the BGP session would not come and rest idle, also open check fails
This is a known problem logged in as CSCtq26829:
Kind regards
Ivan.
-
Archiving log / nologging / direct path insert
Could you please confirm if the following are true or correct me if my interpretation is wrong:
Log mode archive 1) and logging is necessary to deal with the media recovery; It was not necessary for the recovery of the instance.
(2) IF the insert is no. APPEND mode, redo is generated, even if the table is in nologging mode and database is in log noachive mode. This recovery is necessary for recovery of the instance.
(3) direct path insert ignore cancel the generation and can jump redo generation if the object is in nologging mode.
Thank you.
In case if it is relevant, I'm using Oracle 11.2.0.3.(1) Yes, archive logs is required for media recovery.
2 and 3) even if the table is in nologging mode, it generates little recovery data dictionary and index maintenance. After a reboot of a failure - Oracle reads the online redo logs and replay any what transaction it finds in there. It's the little "roll forward." The binary redo information are used to re-read everything that did not get written to the data files. This review included refreshing the information for CANCELLATION (UNDO is protected by roll forward).After the restoration has been applied, the database is generally available for use now - and restore begins. For any transaction that was being processed when the instance failed - we have to revert his changes, roll back. We do this by treating the cancellation of all uncommitted transactions.
The database is now fully recovered.
Also read he following link
http://docs.Oracle.com/CD/B19306_01/server.102/b14220/startup.htm
http://asktom.Oracle.com/pls/asktom/f?p=100:11:0:P11_QUESTION_ID:5280714813869 -
DMZ-Link bandwidth does not change the routing table countin traffic
Hey guys
I'm INE laboratories dong and shoved a weird one that delivers.
I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.
Here is my configuration:
Rack1R6 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 54.1.1.254 distance-54
neighbor 54.1.1.254 dmzlink-bw
neighbour 155.1.67.7 distance-300
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
No Auto-resume
Rack1R6 (config) #.
Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 54.1.1.254 0 54 I
* > 28.119.17.0/24 54.1.1.254 0 54 I
* > 112.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 113.0.0.0 54.1.1.254 0 0 54 50 60 I
* > 114.0.0.0 54.1.1.254 0 0 54 I
* > 115.0.0.0 54.1.1.254 0 0 54 I
* > 116.0.0.0 54.1.1.254 0 0 54 I
* > 117.0.0.0 54.1.1.254 0 0 54 I
* > 118.0.0.0 54.1.1.254 0 0 54 I
* > 119.0.0.0 54.1.1.254 0 0 54 I
r > 155.1.0.0 0.0.0.0 32768 I
Rack1R6 (config) #do sh ip bgp
Version of BGP table is 35, local router ID is 150.1.6.6
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i28.119.17.0/24 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 54 i
* i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I
* > 0 0 54 50 60 54.1.1.254 I
* i114.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i115.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i116.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i117.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
* i118.0.0.0 204.12.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
*> 54.1.1.254 0 0 54 i
* i119.0.0.0 204.12.1.254 0 100 0 54 I
*> 54.1.1.254 0 0 54 i
r i155.1.0.0 155.1.146.4 0 100 0 I
r> 0.0.0.0 32768 i
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* > i205.90.31.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i220.20.3.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
* > i222.22.2.0 155.1.13.3 0 100 0 200 254?
* 155.1.67.7 0 300 200 254?
Rack1R6 (config) #.
# now R4 configuration
Rack1R4 (config) #do sh run | dry BGP
router bgp 100
no synchronization
The log-neighbor BGP-changes
BGP dmzlink-bw
155.1.146.0 netmask 255.255.255.0
aggregate-address 155.1.0.0 255.255.0.0 summary only
neighbour 155.1.45.5 distance-200
155.1.45.5 route-neighbour card GAME-54 on
neighbour 155.1.146.1 distance-100
155.1.146.1 neighbor send-community times
neighbour 204.12.1.254 distance-54
neighbor 204.12.1.254 dmzlink-bw
No Auto-resume
Rack1R4 (config) #.
Rack1R4 (config) #do sh ip bgp Synt.
Local router BGP 150.1.4.4 identifier UNDER number 100
BGP table version is 18, table 18 main routing version
15 entries for network using 1980 bytes of memory
18 entries for path using 936 bytes of memory
9/7 BGP path/bestpath attribute entered using 1512 bytes of memory
3 entries for BGP AS-path ACCESS using 72 bytes of memory
1 entries PMO community, using 24 bytes of memory
0 cache entries of BGP route-map with 0 bytes of memory
0 cache entries of filter-list BGP using 0 bytes of memory
Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory
BGP using 4620 total number of bytes of memory
Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds
Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd
155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3
155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3
204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10
Rack1R4 (config) #do sh ip bgp
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
s > 155.1.146.0/24 0.0.0.0 32768 0 I
* i205.90.31.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i220.20.3.0 155.1.13.3 0 100 0 200 254?
*> 155.1.45.5 0 200 254 ?
* i222.22.2.0 155.1.13.3 0 100 0 200 254?
Network Next Hop path metrics LocPrf weight
*> 155.1.45.5 0 200 254 ?
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents
BGP table version is 18, local router ID is 150.1.4.4
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 28.119.16.0/24 204.12.1.254 0 0 54 I
* > 28.119.17.0/24 204.12.1.254 0 0 54 I
* > 112.0.0.0 204.12.1.254 0 54 50 60 I
* > 113.0.0.0 204.12.1.254 0 54 50 60 I
* > 114.0.0.0 204.12.1.254 0 54 I
* > 115.0.0.0 204.12.1.254 0 54 I
* > 116.0.0.0 204.12.1.254 0 54 I
* > 117.0.0.0 204.12.1.254 0 54 I
* > 118.0.0.0 204.12.1.254 0 54 I
* > 119.0.0.0 204.12.1.254 0 54 I
* > 155.1.0.0 0.0.0.0 32768 I
* > 205.90.31.0 155.1.45.5 0 200 254?
* > 220.20.3.0 155.1.45.5 0 200 254?
* > 222.22.2.0 155.1.45.5 0 200 254?
Total number of prefixes 14
Rack1R4 (config) #.
# and where is the real problem, R1
Rack1R1(config-Router) #do sh ip bgp
Version of BGP table is 15, local router ID is 150.1.1.1
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* i28.119.16.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i28.119.17.0/24 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I
* > I 204.12.1.254 0 100 0 54 50 60 I
* i114.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i115.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i116.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i117.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i118.0.0.0 54.1.1.254 0 100 0 54 I
Network Next Hop path metrics LocPrf weight
* > I 204.12.1.254 0 100 0 54 I
* i119.0.0.0 54.1.1.254 0 100 0 54 I
* > I 204.12.1.254 0 100 0 54 I
* i155.1.0.0 155.1.146.6 0 100 0 I
* > I 155.1.146.4 0 100 0 I
* > 205.90.31.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 220.20.3.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
* > 222.22.2.0 155.1.13.3 0 200 254?
* i 155.1.45.5 0 100 0 200 254?
Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0
112.0.0.0/8, version 4 BGP routing table entry
Paths: (2 available, best #2, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Announced for the update-groups:
1 2
54 50 60, (from a customer-RR)
54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)
Origin, IGP, 0, 100, valid, internal multipath localpref metric.
DMZ-Link Bw 250 KB
54 50 60, (from a customer-RR)
204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)
Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best
DMZ-Link Bw 12500 KB
Rack1R1(config-Router) #do sh ip route 112.0.0.0
Routing for 112.0.0.0/8 entry
Known through 'bgp 100', 200, 0 distance metric
54, internal type tag
Last update of 204.12.1.254 ago 00:15:30
Routing descriptor blocks:
204.12.1.254, 155.1.146.4, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
* 54.1.1.254, 155.1.146.6, there is 00:15:30
Path metric is 0, number of shares of traffic 1
AS hop 3
Beacon road 54
Rack1R1 (config - Router) #.
as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...
can you please help me if I makeover anything in my setup?
Hello
Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.
-
Folder action to run a ruby script
Hi all
I have various AppleScript scripts that deal with PDF files manually, (thanks to the kindness of many on this forum), but I want to convert to a folder rather than ask me sources and destination action script.
This is the current script - it is easy to convert to a folder action so I can just drag files to a hot folder?
=======
_main()
on _main()
o script
aa property : Choose file with command prompt ("choose PDF Files.") Type {"com.adobe.pdf"} ¬
location (path to the Office) by default with multiple selections allowed
the value beginning de choose a folder with prompt ¬ ("Choose Destination folder.") my aa
default location (path to the Office)
game of args for «»
Repeat with an in my aa
Set args to args specified POSIX path form & space
end Repeat
in view of digital channels
if (system information)'s version of the system < "10.9"=""> then
Ruby set to "/ usr/bin/ruby.
on the other
Ruby set to "/ System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby".
end if
end in view of
"ruby shell script &"<'EOF' -="" "="" &="" args="" &="">
require ' osx/cocoa '.
include OSX
require_framework 'PDFKit.
OutDir = ARGV.shift.chomp('/')
ARGV.select {| f | f = ~ \\.pdf$/i} .each | f |
URL = NSURL.fileURLWithPath (f)
doc = PDFDocument.alloc.initWithURL (url)
path = doc.documentURL.path
pcnt = doc.pageCount
(0 .. (pcnt-1)). each | I have |
page = doc.pageAtIndex (i)
page. String.to_s = ~ /VMA_\\S * /.
name = $&
name unless
"puts \"no corresponding to the string in the page #{i + 1} of #{path}------".
# next skip this page
end
Doc1 = doc # PDFDocument.alloc.initWithData (page.dataRepresentation) for this page
less than doc1.writeToFile(\"#{outdir}/#{name}.pdf\") "
"puts \"failed to save the page #{i + 1} of #{path}------".
end
end
end
EXPRESSIONS OF FOLKLORE. "
end script
say o to run
end _main
Hello
You can save the script as a script compiled in applescript
~/Library/Scripts/Folder Action Scripts
and assign it as a folder action script in the hot folder. Specify the destination directory defined in. DESTINATION | property at the top of the script.
* Note that the destination folder cannot be the Hotfolder.
To test the code as a stand-alone script, you can simply run the script in the Script Editor and it will allow you to choose the PDF files by the dialogue.
property |DESTINATION| : ((path to home folder)'s POSIX path & "Desktop/hot") as POSIX file as alias -- alias of destination directory on adding folder items to d after receiving argv if d = |DESTINATION| then display dialog "Folder Action :" & return & ¬ (path to me)'s POSIX path & return & return & ¬ "The destination cannot be the hot folder." with icon stop error number -128 end if _main(argv) end adding folder items to on run -- # for stand-alone test _main({}) end run on _main(argv) (* list argv : list of alias of source PDF files *property |DESTINATION| : alias of destination directory *) script o property aa : argv if (count aa) = 0 then set aa to choose file with prompt ("Choose PDF Files.") of type {"com.adobe.pdf"} ¬ default location (path to desktop) with multiple selections allowed set my aa's beginning to my |DESTINATION| as alias set args to "" repeat with a in my aa set args to args & a's POSIX path's quoted form & space end repeat considering numeric strings if (system info)'s system version < "10.9" then set ruby to "/System/Library/Frameworks/Ruby.framework/Versions/1.8/usr/bin/ruby" else set ruby to "/System/Library/Frameworks/Ruby.framework/Versions/2.0/usr/bin/ruby" end if end considering do shell script ruby & " <<'EOF' - " & args & " require 'osx/cocoa' include OSX require_framework 'PDFKit' outdir = ARGV.shift.chomp('/') ARGV.select {|f| f =~ /\\.pdf$/i }.each do |f| url = NSURL.fileURLWithPath(f) doc = PDFDocument.alloc.initWithURL(url) path = doc.documentURL.path pcnt = doc.pageCount (0 .. (pcnt - 1)).each do |i| page = doc.pageAtIndex(i) page.string.to_s =~ /VMA_\\S*/ name = $& unless name puts \"no matching string in page #{i + 1} of #{path}\" next # ignore this page end doc1 = PDFDocument.alloc.initWithData(page.dataRepresentation) # doc for this page unless doc1.writeToFile(\"#{outdir}/#{name}.pdf\") puts \"failed to save page #{i + 1} of #{path}\" end end end EOF" end script tell o to run end _mainBriefly tested under OS X 10.6.8.
Good luck
H
-
Hi all
Please let me know if I implement IKE V2 on 1006 ASR Cisco router or firewall and sets up IPsec with device IKEv1 (router Cisco, Juniper etc.)
It'll work or not? If so, please share the document to look at other
Syed,
The standards IKEv1 and v2 are not interoperable, if that's what you're looking for.
You can have on a single device, the tunnels with both IKEv1 and IKEv2 peers (he has no problem with that, with the restriction of my initial post), but do not expect IKEv2 configuration only to terminate IKEv1 negotiation.
ASR or ISR G2 come to handle and IKEv2 IKEv1 configuration at the same time.
You can have your connectivity to IKEv2 and IKEv1 peers.
M.
-
error when the BPEL 10 upgrade to 11 g
Hello
We opened and a 10g of bpel project has migrated to 11g jdeveloper 11.1.1.5 following the guests/instructions.
the project has been migrated successfully.
then we tried to restore it without making any changes to the migrated code and he gave the following and other similar caveat.
ignorant C:\...\composite.xml, not on the source path
ignorant C:\...\build.xml, not on the source path
could you please tell what to do to rebuild without warnings?
Thank you
Hello
Sorry, I thought you said you had migrated work and I wanted to just get rid of the warnings...
I guess there's something wrong with the project configuration then... If you go to the project properties, you should see the "Project1" path under path source project > soa content...
Then under technology Scpope, you should see SOA selected...
See you soon,.
Vlad
-
Installer of creative cloud sticks with Lightroom 4.1 showing in place and installation of 4.3
What is the problem with the installer? (see section)
I had installed 4.1 as a separate facility before I went to the creative cloud.
Apparently, there's at least an installation bug: I removed completely Lightroom using uninstall. Subsequently installed via installer creative cloud. Lightroom is installed in C:\Programs can where it was installed before, completely ignoring the installation path in the installation of creative cloud program (what is C:\Adobe for me), which makes the installer not clicking on the link 'Launch app', as the software is not installed where it expects.
So two things to fix: Lightroom 4.3 is not available in the creative clouds, installation path gets ignored by the installation of Lightroom. :-(
Thank you for the information on the custom installation path. You should be able to install Lightroom 4.1 at the default location and then install Lightroom 4.3. 4.3 Lightroom will then use Lightroom 4.1 license information.
We seek to provide an updated release of Lightroom in Adobe Application Manager in the future.
-
Inserting an image with a value of Y in an Access field
Using ASP/VBscript and access
I do a page which dislays a list of organizations (using repeated regions) concerned with disabilities. I want to use the images for symbols which indicate if, for example, an organization uses textphones, is accessible to wheelchairs and other chairs. I use a form to add new records to the database. I want the form to allow users to select the applicable symbols by using the checkboxes. What is the code will allow the registration page to interpret a value Y as a path to the image and ignore a value N.
Thank youAssuming you have text, storing the O N then on the output fields you
have a block of code like this< %="">< br="" >="" si="" recordset.fields.item("wheelchair").value="« Y »" then="">< br="" >="" %="">
<%End if%>However is your domain is configured to be a yes / no type then the best way is to
the test like thisIf recordset.fields.item("wheelchair").value = TRUE then
--
Paul Whitham
Certified Professional Dreamweaver MX2004
Adobe Community Expert - DreamweaverValleybiz Web design
www.valleybiz.NET"Lancs"
News:e6srl5$Jul$1@forums. Macromedia.com...
> Using ASP/VBscript and access
> I get a page that allows a list of organizations (repeated use
(> Regions) concerned with disabilities. I want to use the images for symbols
> who
> indicate if, for example, has an organization using textphones,.
> wheelchair
> access and others. I use a form to add new records to the database.
> I
> useful to allow users to select the applicable using symbols
> check boxes.
> What code will allow the registration page to interpret a value Y as an image
> path
> and ignore a value N.
> Thank you
> -
I downloaded Jdev 11 g and followed the instructions for [Oracle Fusion Store before Demo Application | http://www.oracle.com/technology/products/jdev/samples/fod/index.html].
Data schema and sample are installed successfully. I'm able to compile and generate the model and UI in StoreFrontModule.jws projects.
When I run the StoreFrontUI, I am getting error below. Can you please help.D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\bin\startWebLogic.cmd [waiting for the server to complete its initialization...] . . JAVA Memory arguments: -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m . WLS Start Mode=Development . CLASSPATH=;D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sys_manifest_classpath\weblogic_patch.jar;D:\Oracle\MIDDLE~1\JDK160~1\lib\tools.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic_sp.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.jar;D:\Oracle\MIDDLE~1\modules\features\weblogic.server.modules_10.3.0.0.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\webservices.jar;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5/lib/ant-all.jar;D:\Oracle\MIDDLE~1\modules\NETSFA~1.0_1/lib/ant-contrib.jar;D:\Oracle\Middleware\jdeveloper\modules\features\adf.share_11.1.1.jar;;D:\Oracle\MIDDLE~1\WLSERV~1.3\common\eval\pointbase\lib\pbclient57.jar;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\xqrl.jar;; . PATH=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\native;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\native;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\native;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\bin;D:\Oracle\MIDDLE~1\modules\ORGAPA~1.5\bin;D:\Oracle\MIDDLE~1\JDK160~1\jre\bin;D:\Oracle\MIDDLE~1\JDK160~1\bin;D:\product\10.1.3.1\OracleAS_3\jdk\bin;D:\product\10.1.3.1\OracleAS_3\ant\bin;C:\WINDOWS\system32;C:\WINDOWS;C:\WINDOWS\System32\Wbem;C:\apps\db\oracle102\bin;C:\Program Files\Symantec\pcAnywhere\;D:\product\10.1.3.1\OracleAS_3\MOBILE\sdk\bin;D:\Oracle\MIDDLE~1\WLSERV~1.3\server\native\win\32\oci920_8 . *************************************************** * To start WebLogic Server, use a username and * * password assigned to an admin-level user. For * * server administration, use the WebLogic Server * * console at http:\\hostname:port\console * *************************************************** starting weblogic with Java version: java version "1.6.0_05" Java(TM) SE Runtime Environment (build 1.6.0_05-b13) Java HotSpot(TM) Client VM (build 10.0-b19, mixed mode) Starting WLS with line: D:\Oracle\MIDDLE~1\JDK160~1\bin\java -client -Xms256m -Xmx512m -XX:CompileThreshold=8000 -XX:PermSize=48m -XX:MaxPermSize=128m -Djbo.34010=false -Xverify:none -da -Dplatform.home=D:\Oracle\MIDDLE~1\WLSERV~1.3 -Dwls.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Dweblogic.home=D:\Oracle\MIDDLE~1\WLSERV~1.3\server -Ddomain.home=D:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1 -Doracle.home=D:\Oracle\Middleware\jdeveloper -Doracle.security.jps.config=D:\Oracle\MIDDLE~1\JDEVEL~1\system\SYSTEM~1.88\DEFAUL~1\config\oracle\jps-config.xml -Doracle.dms.context=OFF -Djava.protocol.handler.pkgs=oracle.mds.net.protocol -Dweblogic.management.discover=true -Dwlw.iterativeDev= -Dwlw.testConsole= -Dwlw.logErrorsToConsole= -Dweblogic.ext.dirs=D:\Oracle\MIDDLE~1\patch_wls1030\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_jdev1111\profiles\default\sysext_manifest_classpath;D:\Oracle\MIDDLE~1\patch_cie660\profiles\default\sysext_manifest_classpath -Dweblogic.Name=DefaultServer -Djava.security.policy=D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\weblogic.policy weblogic.Server <Jan 11, 2009 12:42:13 PM IST> <Notice> <WebLogicServer> <BEA-000395> <Following extensions directory contents added to the end of the classpath: D:\Oracle\Middleware\patch_wls1030\profiles\default\sysext_manifest_classpath\weblogic_ext_patch.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\beehive_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\p13n_wls_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\testclient_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\tuxedocontrol_zh_TW.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ja.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_ko.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_CN.jar;D:\Oracle\Middleware\wlserver_10.3\L10N\workshop_zh_TW.jar> <Jan 11, 2009 12:42:13 PM IST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Java HotSpot(TM) Client VM Version 10.0-b19 from Sun Microsystems Inc.> <Jan 11, 2009 12:42:14 PM IST> <Info> <Management> <BEA-141107> <Version: WebLogic Server Temporary Patch for CR380042 Thu Sep 11 13:33:40 PDT 2008 WebLogic Server Temporary Patch for 7372756 Fri Sep 12 17:05:44 EDT 2008 WebLogic Server Temporary Patch for CR381265 Wed Oct 08 10:15:58 PDT 2008 WebLogic Server Temporary Patch for CR380913 Wed Oct 15 13:24:22 PDT 2008 WebLogic Server Temporary Patch for CR381739 Tue Oct 21 14:06:14 IST 2008 WebLogic Server 10.3 Mon Aug 18 22:39:18 EDT 2008 1142987 > <Jan 11, 2009 12:42:18 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> <Jan 11, 2009 12:42:18 PM IST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool> <Jan 11, 2009 12:42:19 PM IST> <Notice> <Log Management> <BEA-170019> <The server log file D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\DefaultDomain\servers\DefaultServer\logs\DefaultServer.log is opened. All server side log events will be written to this file.> <Jan 11, 2009 12:43:12 PM IST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.> <Jan 11, 2009 12:43:25 PM IST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddi was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddi.war'.> <Jan 11, 2009 12:43:25 PM IST> <Warning> <Deployer> <BEA-149617> <Non-critical internal application uddiexplorer was not deployed. Error: [Deployer:149158]No application files exist at 'D:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\uddiexplorer.war'.> <Jan 11, 2009 12:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY> <Jan 11, 2009 12:43:36 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING> <Jan 11, 2009 12:43:46 PM IST> <Notice> <Log Management> <BEA-170027> <The Server has established connection with the Domain level Diagnostic Service successfully.> <Jan 11, 2009 12:43:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN> <Jan 11, 2009 12:43:49 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RESUMING> <Jan 11, 2009 12:43:50 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 127.0.0.1:7101 for protocols iiop, t3, ldap, snmp, http.> <Jan 11, 2009 12:43:50 PM IST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 192.168.1.100:7101 for protocols iiop, t3, ldap, snmp, http.> <Jan 11, 2009 12:43:50 PM IST> <Notice> <WebLogicServer> <BEA-000331> <Started WebLogic Admin Server "DefaultServer" for domain "DefaultDomain" running in Development Mode> <Jan 11, 2009 12:43:50 PM IST> <Warning> <Server> <BEA-002611> <Hostname "192.168.1.100", maps to multiple IP addresses: 192.168.1.100, 127.0.0.1> <Jan 11, 2009 12:43:50 PM IST> <Warning> <Server> <BEA-002611> <Hostname "localhost", maps to multiple IP addresses: 192.168.1.100, 127.0.0.1> <Jan 11, 2009 12:43:51 PM IST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to RUNNING> <Jan 11, 2009 12:43:51 PM IST> <Notice> <WebLogicServer> <BEA-000360> <Server started in RUNNING mode> DefaultServer startup time: 153953 ms. DefaultServer started. [Running application StoreFrontModule on Server Instance DefaultServer...] Uploading jazn-data identities. Uploading jazn-data policies. Uploading credentials. ---- Deployment started. ---- Jan 11, 2009 12:45:09 PM Target platform is (Weblogic 10.3). Running dependency analysis... 2009-01-11 12:45:20.906: Writing WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule\StoreFrontModule-StoreFrontUI-webapp 2009-01-11 12:46:22.093: Wrote WAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule\StoreFrontModule-StoreFrontUI-webapp 2009-01-11 12:46:31.515: Writing EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule 2009-01-11 12:46:31.656: Wrote EAR file to D:\Oracle\Middleware\jdeveloper\system\system11.1.1.0.31.51.88\o.j2ee\drs\StoreFrontModule Deploying Application... <Jan 11, 2009 12:46:38 PM IST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application StoreFrontModule is not versioned.> Jan 11, 2009 12:46:38 PM oracle.adf.share.config.ADFConfigFactory cleanUpApplicationState INFO: Cleaning up application state Jan 11, 2009 12:46:43 PM oracle.as.jmx.framework.PortableMBeanFactory setJMXFrameworkProviderClass INFO: JMX Portable Framework initialized with platform SPI "class oracle.as.jmx.framework.wls.spi.JMXFrameworkProviderImpl" #### The deployment process timed out after 120000 milliseconds and has been interrupted. Failed to start Application. #### Deployment incomplete. #### Jan 11, 2009 12:47:07 PM oracle.jdeveloper.deploy.DeployException at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:247) at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.deployImpl(Jsr88RemoteDeployer.java:157) at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94) at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39) at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94) at oracle.jdeveloper.deploy.common.BatchDeployer.deployImpl(BatchDeployer.java:82) at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94) at oracle.jdevimpl.deploy.fwk.WrappedDeployer.deployImpl(WrappedDeployer.java:39) at oracle.jdeveloper.deploy.common.AbstractDeployer.deploy(AbstractDeployer.java:94) at oracle.jdevimpl.deploy.fwk.DeploymentManagerImpl.deploy(DeploymentManagerImpl.java:436) at oracle.jdeveloper.deploy.DeploymentManager.deploy(DeploymentManager.java:209) at oracle.jdevimpl.runner.adrs.AdrsStarter$5$1.run(AdrsStarter.java:1365) Caused by: oracle.jdeveloper.deploy.DeployException at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:413) at oracle.jdevimpl.deploy.common.Jsr88RemoteDeployer.doDeploymentAction(Jsr88RemoteDeployer.java:238) ... 11 more Caused by: java.lang.InterruptedException at java.lang.Object.wait(Native Method) at oracle.jdevimpl.deploy.common.Jsr88DeploymentHelper.deployApplication(Jsr88DeploymentHelper.java:390) ... 12 more #### Cannot run application StoreFrontModule due to error deploying to DefaultServer. [Application StoreFrontModule stopped and undeployed from Server Instance DefaultServer] ADF Library non-OC4J post-deployment (millis): 31 Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures WARNING: A duplicate definition for the feature "AdfDvtGraph" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 3. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition. Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures WARNING: A duplicate definition for the feature "AdfDvtGauge" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 7. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition. Jan 11, 2009 12:47:39 PM oracle.adfinternal.view.faces.partition.FeatureUtils _addFeatures WARNING: A duplicate definition for the feature "AdfRichPivotTable" has been found at zip:D:/Oracle/Middleware/jdeveloper/system/system11.1.1.0.31.51.88/DefaultDomain/servers/DefaultServer/tmp/_WL_user/StoreFrontModule/kulojs/war/WEB-INF/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. A feature with the same name was originally defined at zip:D:/Oracle/Middleware/jdeveloper/dvt/lib/dvt-faces.jar!/META-INF/adf-js-features.xml, line 11. This may indicate that multiple copies of the same jar file are present on the class path. Ignoring the new feature definition.Stop the server; go for the cleaning and the deployment folder at all.
\jdeveloper\system\system11.1.1.0.31.51.56\o.j2ee\drs
Then, test your db connection, compile model and VC individually and run your jspx page.
-
Why "bgp bestpath missing-as-worst med" command does not produce the desired result?
Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
And I use GNS3 to this practice, the IOS Version: 12.4 (3)
TKS...Back to the beginning:
192.168.23.0/24 192.168.12.0/24
RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
[AS1] [AS2] [AS3]Configuration:
* RA *:
A #do sh run (config - router). b r b
router bgp 1
no synchronization
The log-neighbor BGP-changes
1.1.1.0 netmask 255.255.255.0
192.168.12.2 neighbor remote-2
setmed map of nearby route 192.168.12.2 out
No Auto-resumeIP route 1.1.1.0 255.255.255.0 Null0
setmed allowed 10 route map
the metric value 20* RB *:
B (config - router) #do sh run | b r b
router bgp 2
no synchronization
BGP always-compare-med
The log-neighbor BGP-changes
BGP bestpath missing-as-worst med
neighbor 192.168.12.1 distance-1
neighbour 192.168.23.3 distance-3
No Auto-resume* RC *:
C (config - router) #do sh run | b r b
router bgp 3
no synchronization
The log-neighbor BGP-changes
1.1.1.0 netmask 255.255.255.0
neighbour 192.168.23.2 distance-2
No Auto-resumeIP route 1.1.1.0 255.255.255.0 Null0
But when I checked out table RB bgp, as below:
B (config - router) #do sh ip bgp
BGP table version is 2, local router ID is 192.168.23.2
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incomplete
Network Next Hop path metrics LocPrf weight
* > 1.1.1.0/24 192.168.23.3 0 0 3 I
* 192.168.12.1 20 0 1 iThe prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(
Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:
https://supportforums.Cisco.com/thread/343397?TSTART=0
Note that BGP MED is set to 0 even if the injected BGP route from a connected route.
The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.
Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).
I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?
p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.
-
maximum-paths command help required in BGP
HII...
I use cisco WS-C3750X - 48P switch in the branch with link two different ISP and apply in config. I want to balance traffic going out with two Internet service providers. I have configured "paths of maximum 2" command in BGP.
router bgp 65005
The log-neighbor BGP-changes
neighbour 10.75.112.77 distance - as 4755
neighbour 192.168.179.69 distance - 9583
maximum-paths 2
maximum-paths ibgp 2
!
ipv4 address family
neighbor 10.75.112.77 activate
neighbor 10.75.112.77 - prefix to-ISP list on
neighbor 192.168.179.69 activate
neighbor 192.168.179.69 - prefix to-ISP list on
maximum-paths 2
maximum-paths ibgp 2
No Auto-resume
no synchronization
10.32.60.0 netmask 255.255.255.0
10.32.138.0 netmask 255.255.255.0
network mask 10.45.24.0 255.255.255.192
10.46.185.42 netmask 255.255.255.255
output-address-familyWe receive in BGP table two paths for each mention of destination below
Switch ip bgp 10.34.14.0 #sh
10.34.14.0/24, version 187 BGP routing table entry
Paths: (2 available, best #1, table by default-IP-Routing-Table)
MPIO: eBGP iBGP
Not announced in any position
9583 65505
192.168.179.69 (1.7.0.131) 192.168.179.69
Origin, IGP, localpref 100, valid, externally, better
4755 65088
10.75.112.77 (192.168.197.46) 10.75.112.77
Origin, IGP, localpref 100, valid, external
Switch #.But in the routing table always shows only best path. need two routes in SIDES to balance the load. pls help
Switch # sh ip route 10.34.14.0
Routing for 10.34.14.0/24 entry
Known through 'bgp 65005', 20, 0 distance metric
Tag 9583, external type
192.168.179.69 was last updated 13:36:23 ago
Routing descriptor blocks:
* 192.168.179.69, of 192.168.179.69, 13:36:23 ago
Path metric is 0, number of shares of traffic 1
AS hops 2
Tag route 9583Switch #.
Disclaimer
The author of this announcement offers the information in this publication without compensation and with the understanding of the reader that there is no implicit or explicit adequacy or adaptation to any purpose. Information provided is for information purposes only and should not be interpreted as making the professional advice of any kind. Use information from this announcement is only at risk of the reader.
RESPONSIBILITY
Any author will be responsible for any wha2tsoever of damage and interest (including, without limitation, damages for loss of use, data or profits) arising out of the use or inability to use the information in the view even if author has been advised of the possibility of such damages.
Poster
2 maximum paths is only part of what you need. You must also use the secret/hidden command: bgp bestpath as path multipath-relax
-
Hello.
I have a problem where the best path to a particular destination is removed by BGP.
To explain.
Site A has 2 links to site B. 1 via a peer eBGP on MPLS, 2 via an iBGP during a backup VPN peer.
I configured the ebgp with a higher weight counterpart so that it is preferred.
The problem is the following.
When the ebgp peer link goes down, the connection via the ibgp peer is preferred.
When the link via the ebgp peer returns to the top, the path of the ebgp peer doesn't come back in the BGP table (in fact it dates back to a second and is then removed).
Could someone help me on this one.
Thank you
Lee
It would go something like this:
Country:
router bgp 65500
nearby MPLS map route setMed out
setMed allowed 10 route map
corresponds to the ip address 1
set 2 med
setMed allowed 20 route map
med game 1
permit access-list 1
RtrC:
router bgp 65500
nearby MPLS map route setMed out
setMed allowed 10 route map
corresponds to the ip address 1
set 2 med
setMed allowed 20 route map
med game 1
permit access-list 1
Let me know if you have any questions,
Maybe you are looking for
-
connection lost of rMBP vs airport Time Capsule
It gets more frustrating and I noticed that a number of users had similar problems so I wonder if I'm missing something. Here we go: Time Capsule 2 TB with the 7.7.3 airport firmwareConnected to the router of Virgin Media fibre optic (WiFi disabled i
-
HP Photosmart 5520: Duplex HP5520
Please can someone advise on Duplex (duplex) printing a PDF file by doing a HP5520 connected to an iMAC computer. I don't see any option for it in the settings. Thank you
-
Graphics card is not displayed in Device Manager
I have lenovo Ideapad Y560 and recently his device manager stopped showing the card description under graphics cards ATI graphics card. It shows just the Intel HD graphics card. I tried to install the drivers through the Lenovo Web site too from the
-
error 200022 with NI9244, NI9246 and NI9237
I m using NI9244 and NI9246 to a powermeasurment program in LabVIEW. I intend to expand the program with NI9237 that will measure the force on a load cell. However, when you run the program to meet a200022 error: resource requested by this task has a
-
no error message