Cisco ASR9006 bgp always inactive

Similar Questions

• Alienware13, graphics, external video card amplifier always inactive.

  Hello

  I just bought an alienware13 with an amplifier of graphics. And I have a GTX970 installed in the amplifier of graphics. After I start my alienware, everything seems to work fine, the graphics amplifier power light is the video card fan is running. In the pre-installed application "graphics amplifier" win8.1 I see that my external card is connected. Even with a GPU - Z, I can read all my GTX970 statistics. But it just doesn't! The loading of the GTX970 is always 0%, all applications and games running on the video chip to base. I also tried to connect a LCD monitor to GTX970, but it out nothing and the screen is still in a State of 'no signal '.

  What is the problem with my amp alienware13 and graphics? Please help, thanks!

  Hello

  I have the same problem with the gtx970. So please DELL hurry to implement a solution for this.

  Concerning

• Multihomed BGP - which will broadcast directly connected networks?

  I'm labing in place a script on my site of practical Cisco HSRP, BGP GNS3 and perhaps grow later on network practice as well other protocols.

  http://www.Cisco.com/en/us/Tech/tk365/technologies_configuration_example09186a0080093f2c.shtml

  Everything is already configured and the installer, except that I don't have interconnection routes announced to any BGP process on routers, still.

  Interconnection networks as you can see in the photo are:

  192.168.31.0

  192.168.42.0

  192.168.63.0

  192.168.64.0

  

  Obviously I can't source these networks of each router, or use redistribute connected on each router because I would get duplicate routes, so my question is: what routers you use to come from these 4 networks of? I was thinking of using the network control (or maybe even a map of the route) on ISPA for networks 192.168.31.0 and 192.168.63.0 and ISPB for networks 192.168.42.0 and 192.168.64.0.

  What is the appropriate method of world real something like that, or there are several ways to do this correctly?

  Thanks in advance

  Hi Vanjaburic,

  Failure RIB is not a problem. You'll see this output normally where BGP route is not able to settle in to the routing table, as a route to higher value AD is already there in the routing table. Here we have a static route.

  more information on the failure of BGP RIBS

  http://blog.ioshints.info/2007/12/what-is-BGP-rib-failure.html

  • The function of failure on the SIDES was introduced in IOS version 12.2 T; before that, the BGP routes with superior remote than other sources of road administration have been ignored in silent mode (like all other routing protocols).
  • You can view the BGP routes that are not inserted into the table of IP routing with the commandshow ip bgp ribs-failure , which also explains why the road BGP not was not inserted in the IP routing table.
  • BGP which are not used due to the higher administrative distance roads are always announced to all BGP peers (contrary to what most other distance-vector routing protocols do), unless you configure bgp delete-inactive (introducted in 12.0 and 12.2 T (26) S).

  Kind regards

  Assani

• Why "bgp bestpath missing-as-worst med" command does not produce the desired result?

  Can dear all, someone tell me why "bgp bestpath missing-as-worst med" command does not produce the desired result?
  And I use GNS3 to this practice, the IOS Version: 12.4 (3)
  TKS...

  Back to the beginning:
  192.168.23.0/24 192.168.12.0/24
  RA(F0/0)-(f0/0) RB (s2/0) - RC (s2/0)
  [AS1]                    [AS2]                    [AS3]

  Configuration:
  * RA *:
  A #do sh run (config - router). b r b
  router bgp 1
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  192.168.12.2 neighbor remote-2
  setmed map of nearby route 192.168.12.2 out
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  setmed allowed 10 route map
  the metric value 20

  * RB *:
  B (config - router) #do sh run | b r b
  router bgp 2
  no synchronization
  BGP always-compare-med
  The log-neighbor BGP-changes
  BGP bestpath missing-as-worst med
  neighbor 192.168.12.1 distance-1
  neighbour 192.168.23.3 distance-3
  No Auto-resume

  * RC *:
  C (config - router) #do sh run | b r b
  router bgp 3
  no synchronization
  The log-neighbor BGP-changes
  1.1.1.0 netmask 255.255.255.0
  neighbour 192.168.23.2 distance-2
  No Auto-resume

  IP route 1.1.1.0 255.255.255.0 Null0

  But when I checked out table RB bgp, as below:

  B (config - router) #do sh ip bgp
  BGP table version is 2, local router ID is 192.168.23.2
  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
  r SIDE-failure, stale S
  Source codes: i - IGP, e - EGP,? -incomplete
  Network Next Hop path metrics LocPrf weight
  * > 1.1.1.0/24 192.168.23.3 0 0 3 I
  *                          192.168.12.1            20                         0  1 i

  The prefix is assigned a MED of 0, but also the best path value when I use "bgp bestpath missing-as-worst med" in how to configure bgp... :-(

  Please take a look at the discussion on the configuration of drugs to an eBGP neighbor:

  https://supportforums.Cisco.com/thread/343397?TSTART=0

  Note that BGP MED is set to 0 even if the injected BGP route from a connected route.

  The first time I came across this problem sending MED was there in a picture of 5-6 years service provider. Routes were injected into BGP with the command 'network', has been validated by OSPF routes or static to null0. Involuntary consignment of drugs was mess with load balancing between 2 links of our inbound traffic from the same upstream service provider.

  Also note that if a route is learned via iBGP, border router removes MED before the road to advertising for an eBGP peers (i.e. the above comments apply a when a route is injected locally into the border and then router BGP sent to an eBGP peer).

  I don't know what the cause of the problem that you said in your last post. It delivers last for a long time or that it does not change after a while?

  p.s. Sorry, I edited post because I said "iBGP" instead of "eBGP" at some point.

• Firefox crashed 45 times in 24 hours.

  I work to a new installation of Windows. also new video card, processor, hard drive. The night last Firefox broke every five minutes. He crashed once before that I put on my addons and several times after (somewhere around 30 times). I tried to go back to an older version of Firefox and crashed as well. It will be either crash at startup, or it will open my tabs and then stop.

  Here is the information that might be useful: https://crash-stats.mozilla.com/report/index/bp-864db5b8-b866-4d20-9f60-913862150406

  I ran Firefox reset to get rid of my modules, but they were:
  Extensions: Adblock more 2.6.9 Amazon Smile 1Configuration for Firefox, Norton Toolbar 2014.7.12.7, reddit improvement suite 4.5.4, abd [fvd] 6.6.7 speed dial.

  Topic: Fractal Frost

  Plugins: OpenH264 Video by Cisco 1.3 (always activate); Shockwave flash 13.0.0.277 (always); NVIDIA 3d vision 7.17.13.4788 (ask to activate) - 2 of them, a Vision and a Vision streaming; and WildTangent Games (never turn).

  It crashed at least 3 times since I have reset Firefox.

  I appreciate the responses. The same day I posted that, Norton started throwing errors also. We uninstalled and reinstalled, but it seemed he had several things wrong so we ended up wiping the hard drive again. I have not tried to download new Firefox again because Norton still gave me errors. I appreciate this help. It is not really resolved, but I don't want that people feel that need to enter and continue to try to understand. I still don't know what happened.

• 4 GB of RAM - only a few MB left * help *.

  Hello

  yesterday, I noticed several hick ups with lack of RAM. All running programs were arrested in a scenario for the accident. He (OSX Yosemite) I was thinking that the question might have been "addressbooksourcesync" that took a lot of RAM. Then I solved this problem so that this doesn´t application take longer, but the problem remains. I then upgraded to El Capitan, but yet all of my RAM seems to have disappeared and the machine is incredibly slow. There here are some hard facts of my analysis but I couldn t see the main issue so far. Is there someone out there who is able to help me?

  Thanks in advance,

  BR Nick!

  Model: MacBook Air 13 ", mid-2012, 1.8 GhZ Intel Core i5, 4 GB RAM

  • iStat Pro shows only 51 MB left, but always inactive 1 GB
  • Activity monitor shows 3.13 GB wired, about 800 MB of cache, most using "kernel_task". I also read a few posts on this subject, but I guess that the problem is hidden somewhere else
  • EtreCheck show 3.97 GB of RAM used, but there is not too many applications running in my eyes and I'm not able to identify the troublemaker
    

  

  

  EtreCheck version: 2.6.6 (226)

  Generated report 05.12.15, 20:05

  Time 01:43

  Download http://etrecheck.com EtreCheck

  Click on the links [click for support] to help with non-Apple products.

  Click on the links [click for more details] for more information on this line.

  Hardware Information: (Does that mean?)

  MacBook Air (13 inch, mid-2012)

  [Click for plug technique]

  [Click here for the User Guide]

  MacBook Air - model: MacBookAir5, 2

  1 1.8 GHz Intel Core i5 CPU: 2 strands

  4 GB RAM not extensible

  BANK 0/DIMM0

  OK 2 GB DDR3 1600 MHz

  BANK 1/DIMM0

  OK 2 GB DDR3 1600 MHz

  Bluetooth: Good - transfer/Airdrop2 taken in charge

  Wireless: en0: 802.11 a/b/g/n

  Battery: Health = battery check - Cycle count = 586 - SN = D8624160J6SDKRNAX

  Video information: (Does that mean?)

  Graphics Intel HD 4000

  Color LCD 1440 x 900

  Software: (Does that mean?)

  OS X El Capitan 10.11.1 (B 15, 42) - since the start time: 8 hours

  Disc information: (Does that mean?)

  TS128E SSD APPLE disk0: (121,33 GB) (Solid State - TRIM: Yes)

  EFI (disk0s1) : 210 MB

  HD (disk0s3) [recovery] recovery: 650 MB

  Macintosh HD (disk 1) /: 120,10 (Go 63,37 free)

  Storage of carrots: disk0s2 120.47 GB Online

  USB information: (Does that mean?)

  Card reader Apple

  Apple Inc. Apple keyboard / Trackpad

  Apple Inc. BRCM20702 hub.

  Apple Inc. Bluetooth USB host controller.

  Apple Inc. FaceTime HD camera (built-in)

  Lightning information: (Does that mean?)

  Apple Inc. Thunderbolt_bus.

  Guardian: (Does that mean?)

  Mac App Store and identified developers

  Launch officers: (Does that mean?)

  [loading] com.oracle.java.Java - Updater.plist [click to support]

  [loading] org.macosforge.xquartz.startx.plist [click to support]

  Launch demons: (Does that mean?)

  [loading] com.adobe.fpsaud.plist [click to support]

  [loading] com.microsoft.office.licensing.helper.plist [click to support]

  [loading] com.oracle.java.Helper - Tool.plist [click to support]

  [loading] org.macosforge.xquartz.privileged_startx.plist [click to support]

  User launch officers: (Does that mean?)

  [operation] com.amazon.music.plist [click to support]

  [loading] com.google.keystone.agent.plist [click to support]

  Items in user login: (Does that mean?)

  iTunesHelper program (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)

  Dropbox Programm (/ Applications/Dropbox.app)

  TuneupMyMac UNKNOWN (missing value)

  Sony Ericsson bridge Helper program hidden (~/Library/Application Support/Sony Ericsson Bridge for Mac/Sony Ericsson bridge Helper.app)

  Other applications: (Does that mean?)

  [ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.EtreCheck

  [ongoing] com.google.Chrome.48032

  [operation] com.sonyericsson.Sony - Ericsson-bridge - Helper.72352

  Plug-ins Internet: (Does that mean?)

  FlashPlayer - 10.6: Version: 19.0.0.245 - 10.6 SDK [click for support]

  QuickTime Plugin: Version: 7.7.3

  Flash Player: Version: 19.0.0.245 - 10.6 SDK [click for support]

  Default browser: Version: 601 - SDK 10.11

  SharePointBrowserPlugin: Version: 14.0.0 [click for support]

  AmazonMP3DownloaderPlugin101749: Version: unknown

  JavaAppletPlugin: Version: update of Java 7 55 check version

  User Plug-ins internet: (Does that mean?)

  WebEx64: Version: 1.0 - 10.6 SDK [click for support]

  Web of Google Earth plugin: Version: 7.1 [click for support]

  Safari extensions: (Does that mean?)

  Vacuum MyPermissions

  3rd party preference panes: (Does that mean?)

  Flash Player [click for support]

  Java [click for support]

  Time Machine: (Does that mean?)

  Skip system files: No.

  Mobile backups: OFF

  Automatic backup: YES

  Volumes to back up:

  Macintosh HD: Disc size: 120,10 GB disc used: 56.73 GB

  Destinations:

  My Passport for Mac [Local]

  Total size: 2.00 TB

  Total number of backups: 4

  An older backup: 15.02.15, 19:11

  Last backup: 05.12.15, 09:09

  Size of backup drive: Excellent

  Backup TB 2.00 size > (disk size 120,10 GB X 3)

  Top of page process CPU: (Does that mean?)

  6% kernel_task

  4% hidd

  3% com.apple.WebKit.WebContent (7)

  2% fontd

  1% com.apple.WebKit.Plugin.64

  Top of page process of memory: (Does that mean?)

  811 MB com.apple.WebKit.WebContent (7)

  496 MB kernel_task

  147 MB Google Chrome Helper (4)

  Safari of 139 MB

  Com.apple.WebKit.Plugin.64 94 MB

  Virtual memory information: (Does that mean?)

  24 MB of free RAM

  3.97 GB used RAM (682 MB cache)

  Used Swap 0 B

  Diagnostic information: (Does that mean?)

  December 5, 2015, 19:23:32 ~/Library/Logs/DiagnosticReports/secd_2015-12-05-192332_[redacted].crash

  December 5, 2015, 13:23:23 ~/Library/Logs/DiagnosticReports/secd_2015-12-05-132323_[redacted].crash

  5 December, 2015 11:04:32 self-test - spent

  December 4, 2015, 23:03:33 ~/Library/Logs/DiagnosticReports/CallHistoryPluginHelper_2015-12-04-230333_[red, agi] .crash

  You actually have a performance problem?

  Don't you worry about that. OS X, like all modern UNIX systems, use all available RAM to increase performance. The important thing is to the memory, which is green on the next page you post. There is nothing wrong. It is the way it is supposed to work.

• BIOS v 1.18

  Hello!

  Another question on my aspire 9520:

  If I can Flash my bios (current version: 1.12) with the 1.18 a?

  It is worth the change - and the risk!

  It will solve these recurring issues:

  3 USB on the left always inactive.

  The RAM is limited to 3 GB even with 2 x 2 GB inserted into both?

  I'll try to answer the questions in order:

  Yes, you can Flash the BIOS v1.18.

  Is there something wrong with the BIOS you currently have?

  I do not suspect anything short of repair / motherboard change would fix broken USB ports.

  RAM is limited, I suspect that, by your operating system.  A 32-bit operating system is limited to about 3.2 GB.

• WRT54GH will not show wireless! Help!

  Hello to you all,.

  I have a serious problem with this template WRT54GH.

  It is configured with automatic DHCP, plugged into a DSL cable modem to use on a Mac OS 10.6.6 and Win7.

  I used the connection wireless with no problems until today. Suddenly it will not broadcast my connection Wireless by all means!

  I have already created a new connection, tried multiple SSID, passed to B, G, I tried WEP, WPA, different channels, even with the SSID broadcast enabled/disabled and I cannot find the router on any computer.

  I already updated the firmware, reboot the router to the factory settings and tried every tip on the support of Cisco, Google and always avaiable not game.

  The ethernet cable works perfectly, from where I am accessing internet now, but I guess that's not the proper use of a wireless router...

  Can anyone help me on this issue?

  Thank you!

  After all, it was a problem with the router.

  I got this problem change for a new!

• HP Mini MIE & Open Source?

  There are a lot of critics mixed on locked Linux devices like iPhone & that, however, as a linux user myself, I believe that this is a positive step to introduce to the world centered on M$... Keep everything else simple and plug-and-play. This seems to be the most viable solution to make images for a long time as an alternative friendly haker.

  That said, I happen to be one of those hakers, who likes my CLI but also appreciate a well-designed GUI.
  not being is not able to learn new tips tux does not work for this geek. can he go out and play?

  other posts indicate THAT CLI is not really missing (as stated in the doc)
  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=4194
  http://h30434.www3.HP.com/PSG/board/message?board.ID=OS&message.ID=3531

  I really want to get your hands on one of these
  ... If he can play nice with the Community open source

  people have succeeded with ubuntu stock, NBR or another Dion?
  requires the mini wifi custom, NDS or other modules as EEA?
  MIE piracy will affect the warranty?

  -marcB
  Although I am an employee of HP,
  I speak for myself and not on behalf of HP.

  -marcB
  Although I am an employee of HP,
  I speak for myself and not on behalf of HP.

  > mini requires custom wifi, NDS or other modules as EEA?

  Briefly, I installed Ubuntu 8.10 on the Mini Mi 1110NR.  All the material has been supported.  WiFi required a pilot non-free which is installable repositories.  However, I came back to HP Linux, as I found 8.10 resume not always inactive.

  I suppose that this phenomenon was linked to the wifi drivers.  I spent 0 time troubleshooting, because I like the interface of HP and generally prefer Ubuntu 8.04 is based distro of HP, anyway.

  A few tips:

  -Open a terminal: ALT - F2 gnome-terminal

  -sudo apt - get install gdebi to install the front end pretty .deb that Ubuntu is provided with.  This allows things like installing files .deb on internet

  -MIE repositories have had so far of each package of 8.04.1 standard I've ever used.  HP limit what is available via Add/Remove... don't try to prevent people from apt - get install what they want.  It's very appreciated.  I hope that Asus based on this.

  -J' found the sound quality to be terrible, the problem was a package: idt-alsa-eq-plugin I would remove just that.

  -Adobe Reader is bloated for a machine with 8 GB SSD.  apt - get, remove it and install mozplugger.  It will use Evince to embed a PDF file in a browser window

  -Thingie from USB HP recovery works very well.  There is a text .cfg file that allows you to twist/remove the recovery partition as swap.  My 8GB SSD comes with only 2.1 GB free, they allocated 1 GB for recovery (very good, but not necessary if you do a recovery USB disk) and a huge 2 GB for swap.  (!!)  Why on earth they did it is beyond me.  I reinstalled from the USB and abandoned the recovery partition, made 256 MB swap.

  -Shortcuts can be found in usr/share/applications/*.desktop.  I copied one to make a .desktop for gnome-terminal entry.

  That's all I can think of at the moment.  I must say, HP and Canonical did a job with the user interface.  Just the right combination of easy to use and flexible.  Great stuff.

  Yesterday, I used my new Mini to troubleshoot a ThinkPad C2D Vista 7lb to 1 GB of RAM.  The Mini could fly circles around her.  10 minutes to start, without exaggeration.

• Why replace MSE 8510 MCU 4.4 with Telepresence Server (3.1)

  We have a with MCU 4.4 MSE 8510. Looking at the software accessible to the general public, that looks like that I could replace the software with the telepresence instead server software.

  Why I do this? What can I win (and lose) by? I don't have any old CTS systems, just Jabber, MXP and C systems. Is telepresence server software that is actively developed while the old software MCU is not?

  Thank you

  I agree with you, Codian MCU is the best.   =)

  This is why I think Cisco is not going to add MCU multi-screen support, because if MCU multi-screen support, I don't know that all customers would not want to migrate to server TP or buy a new server TP.

  But because of these two main features of server TP, we think about its use, who are the multimonitor support and support for the optimization of the resources with the driver.

  Many Cisco! As always... In this way, they can keep the two products on the market, MCU and GST.

  Paulo Souza

  My answer was helpful? Please note the useful answers and do not forget to mark questions resolved as "responded."

• SX20 installation with no CUCM

  We expect use SX20 conference 2 of different city offices using a link with sufficient bandwidth and no firewall between, by the time there is no available CUCM, no VCS, no TMS, etc, and I have 2 questions about H323 and SIP configurations:

  -What is the best way to configure the SX20 devices?  Configure the profile H323 Gatekeeper or Direct mode?  What are the recommendations on any mode?

  -How do I dial to each other?  By IP address?

  TC6.0.0 running

  Any help will be be appreciated.

  Kind regards

  Juan Carlos Arias

  So I won't have to configure any other option on H323 menu (Authentication, Gatekeeper and H323 Alias)??  Just like that??
  

  Yes, for a basic call you do not have to configure anything else on H323 configuration options.

  So, the system information status about H323 and SIP will be always Inactive, right??
  

  Yes, gatekeeper and SIP server status will be displayed as inactive, it means that you are not using any server to make calls. But the protocols are still capable, so you can use H323 do call by dialing the IP address normally.

  Concerning

  Paulo Souza

• Problem of the NAC - Agent is a disconnect

  Hello

  We have a problem with the NAC in mode virtual outofband.

  AD SSO, sanitation, everything is working, but the strange things happening: after awhile, when downloading large files, Agent connects to the formula of network users, and the registration process is restarted.

  I disabled the pulsation clocks and timers, session, but we still have a problem.

  Also, while sniffing traffic on the switch port, I noticed that after have correctly connected you to the own Cisco Agent network always send traffic to UDP Port 8905. Is this a normal behavior?

  I noticed problems with this version of the agent causing connections to give up intermittently. I would upgrade to agent v4.1.3.1.

• Emergency response in ASA VPN 5055

  Hey guys...

  AM starting in ASA and cisco configuration, I always use ASDM Launcher to set up or change my Cisco Firewall ASA5055, I tried to enable VPN on my ASA with IPsec VPN Wizard, remote VPN section and I did a configuration for Cisco VPN Client (not windows), until this moment, I still couldn't connect to my VPN, I don't know where is the problem exactly , it delivery? or access list?
  Here is running Setup:

  -------------------------------------------------------------------------------------------------------------------------------------------------------------------------------

  : Saved
  
  :
  
  ASA Version 8.0(3)6
  
  !
  
  hostname ciscoasa
  
  enable password ******* encrypted
  
  passwd ********* encrypted
  
  names
  
  !
  
  interface Vlan1
  
  nameif inside
  
  security-level 100
  
  ip address 10.10.10.2 255.255.255.252
  
  !
  
  interface Vlan2
  
  nameif outside
  
  security-level 0
  
  ip address xx.xx.xx.xx 255.255.255.248
  
  !
  
  interface Ethernet0/0
  
  switchport access vlan 2
  
  !
  
  interface Ethernet0/1
  
  !
  
  interface Ethernet0/2
  
  !
  
  interface Ethernet0/3
  
  !
  
  interface Ethernet0/4
  
  !
  
  interface Ethernet0/5
  
  !
  
  interface Ethernet0/6
  
  !
  
  interface Ethernet0/7
  
  !
  
  ftp mode passive
  
  same-security-traffic permit inter-interface
  
  same-security-traffic permit intra-interface
  
  access-list DALLAS_splitTunnelAcl standard permit host 192.168.3.229
  
  access-list DALLAS_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252
  
  access-list DALLAS_splitTunnelAcl standard permit 192.168.3.0 255.255.255.0
  
  access-list dallas_VPN_splitTunnelAcl standard permit 10.10.10.0 255.255.255.252
  
  access-list Out extended permit ip any any
  
  access-list inside_nat0_outbound extended permit ip 10.10.10.0 255.255.255.252 192.168.14.0 255.255.255.192
  
  pager lines 24
  
  logging asdm informational
  
  mtu inside 1500
  
  mtu outside 1492
  
  ip local pool Dallas 192.168.14.1-192.168.14.50 mask 255.255.255.0
  
  ip verify reverse-path interface inside
  
  ip verify reverse-path interface outside
  
  icmp unreachable rate-limit 1 burst-size 1
  
  icmp permit any inside
  
  asdm image disk0:/asdm-603.bin
  
  no asdm history enable
  
  arp timeout 14400
  
  global (outside) 1 interface
  
  nat (inside) 0 access-list inside_nat0_outbound
  
  nat (inside) 1 0.0.0.0 0.0.0.0
  
  static (inside,outside) interface 192.168.3.229 netmask 255.255.255.255
  
  route outside 0.0.0.0 0.0.0.0 xx.xx.xx.xx 1
  
  route inside 192.168.3.0 255.255.255.0 10.10.10.1 1
  
  timeout xlate 3:00:00
  
  timeout conn 1:00:00 half-closed 1:10:00 udp 0:02:00 icmp 0:00:02
  
  timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
  
  timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
  
  timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
  
  dynamic-access-policy-record DfltAccessPolicy
  
  http server enable
  
  http 192.168.1.0 255.255.255.0 inside
  
  http 0.0.0.0 0.0.0.0 inside
  
  no snmp-server location
  
  no snmp-server contact
  
  snmp-server enable traps snmp authentication linkup linkdown coldstart
  
  no sysopt connection permit-vpn
  
  crypto ipsec transform-set ESP-DES-MD5 esp-des esp-md5-hmac
  
  crypto ipsec transform-set ESP-DES-SHA esp-des esp-sha-hmac
  
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set pfs
  
  crypto dynamic-map SYSTEM_DEFAULT_CRYPTO_MAP 65535 set transform-set ESP-DES-SHA ESP-DES-MD5
  
  crypto map outside_map 65535 ipsec-isakmp dynamic SYSTEM_DEFAULT_CRYPTO_MAP
  
  crypto map outside_map interface outside
  
  crypto isakmp enable inside
  
  crypto isakmp enable outside
  
  crypto isakmp policy 10
  
  authentication pre-share
  
  encryption des
  
  hash sha
  
  group 2
  
  lifetime 86400
  
  no crypto isakmp nat-traversal
  
  telnet 0.0.0.0 0.0.0.0 inside
  
  telnet timeout 5
  
  ssh 0.0.0.0 0.0.0.0 inside
  
  ssh 0.0.0.0 0.0.0.0 outside
  
  ssh timeout 5
  
  console timeout 0
  
  dhcpd auto_config outside
  
  !
  
  vpnclient server xx.xx.xx.xx
  
  vpnclient mode client-mode
  
  vpnclient vpngroup dallas password ********
  
  vpnclient username dallas password ********
  
  threat-detection basic-threat
  
  threat-detection scanning-threat shun
  
  threat-detection statistics
  
  group-policy DefaultRAGroup internal
  
  group-policy DefaultRAGroup attributes
  
  vpn-tunnel-protocol IPSec l2tp-ipsec
  
  group-policy DfltGrpPolicy attributes
  
  vpn-tunnel-protocol IPSec l2tp-ipsec
  
  group-policy dallas internal
  
  group-policy dallas attributes
  
  dns-server value xx.xx.xx.xx
  
  vpn-tunnel-protocol IPSec
  
  username admin password *************** encrypted privilege 15
  
  username dallas password *********  nt-encrypted privilege 0
  
  username dallas attributes
  
  vpn-group-policy DefaultRAGroup
  
  username user1 password *********** nt-encrypted privilege 0
  
  username cisco password ********* encrypted privilege 15
  
  tunnel-group DefaultRAGroup general-attributes
  
  default-group-policy DefaultRAGroup
  
  tunnel-group DefaultRAGroup ipsec-attributes
  
  pre-shared-key *
  
  tunnel-group dallas type remote-access
  
  tunnel-group dallas general-attributes
  
  address-pool Dallas
  
  default-group-policy dallas
  
  tunnel-group dallas ipsec-attributes
  
  pre-shared-key *
  
  !
  
  class-map inspection_default
  
  match default-inspection-traffic
  
  !
  
  !
  
  policy-map type inspect dns preset_dns_map
  
  parameters
  
    message-length maximum 512
  
  policy-map global_policy
  
  class inspection_default
  
    inspect dns preset_dns_map
  
    inspect ftp
  
    inspect h323 h225
  
    inspect h323 ras
  
    inspect rsh
  
    inspect rtsp
  
    inspect esmtp
  
    inspect skinny 
  
    inspect sunrpc
  
    inspect xdmcp
  
    inspect sip 
  
    inspect netbios
  
    inspect tftp
  
    inspect icmp
  
  !
  
  service-policy global_policy global
  
  prompt hostname context
  
  Cryptochecksum:beac138dba28b1b3b58dffbcbc4fbb93
  
  : end
  
  asdm image disk0:/asdm-603.bin
  
  no asdm history enable

  When I use the VPN Client to connect to my VPN using the real IP, this message

  

  Please if someone can see the problem and tell me how to solve it by ASDM GUI or CLI, but I preferred ASDM...

  Note: VPN Tunnel must connect on 192.168.3.X internal network IP range
  which is accessible by ASA you see the redirect to 192.168.3.229

  Thank you all

  Here is the step by step on all orders that are required so far:

  conf t

  Sysopt connection permit VPN

  Crypto isakmp nat-traversal 25

  inside_nat0_outbound to access extended list ip 192.168.3.0 allow 255.255.255.0 192.168.14.0 255.255.255.192

  dallas attributes of group policy

  Split-tunnel-policy tunnelspecified

  value of Split-tunnel-network-list DALLAS_splitTunnelAcl

  user name attribute of dallas

  No strategy of group-vpn-DefaultRAGroup

  Strategy Group-VPN-dallas

  not static (inside, outside) interface 192.168.3.229 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 80 192.168.3.229 80 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 132 192.168.3.229 132 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 444 192.168.3.229 444 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 66 192.168.3.229 66 netmask 255.255.255.255

  public static tcp (indoor, outdoor) interface 77 192.168.3.229 77 netmask 255.255.255.255

  clear xlate

  And finally "wr mem" to save the configuration.

  Regarding spam, ASA cannot block spam unless you have the CSC module installed on the SAA.

• ACS VM 5.2 ESXi 4-ESXi5

  Hello.

  My client as agreed at the servers virtualized in ESXi5, the problem is that the ACS5.2 has been installed in ESXi4.

  Is there any question connects to the migration of the CSA installed 5.2 in ESXi4 to ESXi5?

  The procedure to follow?

  Thank you

  Antero Vasconcelos

  Hello Antero,

  ACS 5.2/5.3 can't ESXi 5.0. It seems that ESXi 5.0 support for versions 5.x ACS will be included on the version 5.4 of the ACS. However, I am not aware of the release of GBA 5.4 ETA.

  As ESXi 5.0 is not a supported platform / tested for ACS 5.x, you may experience bad behaviors on the application itself.

  We have seen ACS 5.3 running on ESXi 5.0 without any problem on a lab environment, however, if a problem arises and a support ticket is necessary, Cisco TAC will always respect the fact that we run that demand for ACS in the specifications supported listed on the product release notes and installation guides.

  I hope this helps.

  Kind regards.

• Creative solutions to Cloud membership

  Hi all! I have a problem with the subscription of creative cloud. Everytime I open an application, like InDesign, it will open a warning that your subscription has expired. I would point out that the annual fee that I signed more licenses expiring October 17, 2016. I tried all the solutions given to me by the help of Adobe, but I couldn't fix anything. I noticed that one of my products, nothing is recorded, and it should be as specified in the online manual. I has not yet provided the serial number to register a product. I should note also that two licenses only my problem. The license is for Mac. I don't know what to do and chat are always inactive even at the times specified by them. Please help me!

  CAT should be available - it might be a problem of connection/browser.

  To the link below, click on the still need help? option in the blue box below and choose the option to chat or by phone...
  Make sure that you are logged on the Adobe site, having cookies enabled, clearing your cookie cache.  If it fails to connect, try to use another browser.

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html ( http://adobe.ly/19llvMN )