Question about BGP best path selection (LOCAL)
Hi Sir,
Out of BGP table which I stumbled upon a book is attached. There is a prefix of the table with two paths.
I noticed that the LOCAL_PREF attribute is not displayed for the routes recorded via eBGP. My understanding of LOCAL_PREF is that it is configured locally on the router and only exchanged within the same as with the other speakers.
Someone can say, what criteria does BGP uses to select the best path for prefix 172.18.0.0? He chooses the iBGP route (jump according to 172.30.255.150). In my opinion, it uses the LOCAL_PREF attribute.
I read that the 'Best BGP' document path selection algorithm this path without LOCAL_PREF is considered as having the value set with the command 'default local-preference bgp' or 100 by default. So in my case, BGP compares 300 LOCAL_PREF (via 172.30.255.150) against 100 LOCAL_PREF (via 10.100.83.1).
Please correct me if I got a bad concept.
Thank you.
B.Rgds,
Lim TS
You are right. The internal path (local-pref 300) wins over the external path (local-pref 100) due to its higher local preference.
Hope this helps,
Tags: Cisco Network
Similar Questions
-
Question about the upgrade path Essbase
Hi Techies,
We are modernizing Essbase in windows since version 7.1.6 to 9.3.1 platform. Now my question is what is the best way to do that, as first upgrading to 9.2 then 9.3.1 or completely uninstall and reinstall the version 9.3.1 directly? In Essbase 9.3.1 application is rebuilt from scratch, so we thought to stick with the second option IE 7.1.6 to uninstall and reinstall 9.3.1. But now we have other applications that must be replicated from 7.1.6 to 9.3.1 an app frame. We heard that we must follow the path of upgrade first to 9.2, then in 9.3.1. Is this true? !!
Can you guys shed some light on this as well as the consequences of each option, if applicable.
Thanks in advance
Kpersonally, I would be completely uninstall, make sure that all the elements of the old version have disappeared, so check the registry and environment variables have been removed. Then install the 9.3.1.
As it seems as you are going to use the same server, then for the applications that you want to migrate upward all objects (outlines, scripts of calc, rules, reports), export the data.
So if you want to export security and filters, then I would look using the essbase (free utility) Advanced Security Manager. Then rebuild the applications once the new environment has been built.See you soon
John
http://John-Goodwin.blogspot.com/ -
Question about hidden images and selection
Hello. Let's say I put an image on a page, then it hidden with a smaller shape - a circle. During the layout I would an image like that hidden to be selectable only in the unmasked area (selectable basically just inside the circle). Is it achievable? Currently, every time I fly over the hidden region of the masked group gets highlighted, and it's very annoying when trying to select a specific hidden group out of several, which are nearby.
Thx for any assistance.
Johnny,
There are dirty destructive work, with the selected clipping mask:
(1) in the drop-down list the palette/Panel transparency list select everything except Normal (Multiply is fine; this step may not be necessary in your version, you can try without him).
(2) object > flatten transparency, just keep the defaults including 100% vector.
(3) thrill (optional, unless that inevitable).
This will crop the image so it is only highlighted in the bounding box of the Clipping Path.
-
Questions about layers and color selection. Help, please! : 0
Hello! I am a user of Gimp for a long time, but finally upgraded to photoshop primarily for logo designs or. I'm a bit lost when it comes for the most part and did not get some questions answered by youtube tutorials that I thought I could. How to draw on multiple layers? I don't understand the error message when I try. Also how I ' smart select ' a certain color on a given layer? Thank you very much!!!
First of all, I suggest that if your work is in large part illustration and logos, you look at the Adobe Illustrator. Amnesty International, a vector approx. offers many advantages and can provide an accurate picture regardless of resizing. If you prefer to work with Photoshop, you can draw on several layers, by choosing each layer in turn through the layers panel. If an image has several dull colors and you want to select one of them to put on its own layer, see the feature Select > color range followed by Cmd + J. remember to save your file as a psd rather than jpg in order to maintain the different layers.
-
Question about the color range selection methods similar colors in Photoshop.
Hello
I have a few images that I must exclude the background out and some of them are very difficult to exclude. For example, an image is that of a white hat that has feathers on it and it sits on a white background. These photos were taken by a professional photographer, but it is extremely difficult for me to choose the background because it is dangerously close to the foreground in terms of color image. I tried to use the range select color that works a little, but feathers are almost impossible to extract. Does anyone know of a more efficient way to choose the colors of the narrow range? Any help would be appreciated.
You need contrast between the subject and the background to be able to extract the subject well. If you can't find a way to create the necessary contrast, you will need to rig the extraction. If the subject has smooth edges may use the pen tool to create a path or selection then the selection of feathers and use it as a mask to soften the edges of the object.
-
Ask questions about the best way to build a page
I built a site design in Photoshop and then slice it upward, leaving a space for the main text of each page. Then, I put the html code and images in Dreamweaver and built a model, make an editable region in the table cell where the main text of each page will go. Here's a screenshot to give you a better idea...
Screenshot
Originally I set up so that the combo box had a scroll bar to accommodate the amount of text to the page (I used whole overflow to auto in CSS). The problem is, the customer does not want scrollbars and wants to dynamically extend the page vertically according to the amount of text for the page (with top image of women aligned with the text and their relationship to bio under the navigation bar and 2 magazines and photos that his introductory text and copyright is pushed down to the bottom below the main text).
If I don't use the scroll bars and try to put more text that you can insert into the editable cell, it breaks the table and nav bar gets all messed up and looks like this...
Screenshot 2
I am at a loss, how can I set up so that the page will dynamically expand vertically with the text? Any suggestions? A table is not the way to go? What is the best way to do it?
I'm open to what it is at this point, I tried things on my own for hours with no. results, any help is appreciated, thanks!Hey everyone, I just wanted you to know that I have rebuilt the table in Dreamweaver, it has worked very well and solved all the questions I had, thanks for any help!
-
Hello
Have a question about the best way to create a document.
I make a menu for a small restrauant. He wants to do on 8 1/2 x 11 and trifolded.
Q. will it be a problem if I have created six 8 1/2 x 11 documents and then place each one of six in the correct Panel documentation in the doc of trifolded (and do a fitting > content to adapt the framework to scale?)
Now, you may be wondering why would I not only work on the three himself and forget the 6 docs. Well, it seems just easier to work on something that I can see and easily managed without having to constantly zoom (as I would on the Trifolded 8 1/2 x 11 doc). Then, just take one place and fitting for the great doc in the right panel of the portfolios in three sides.
In addition, there a chance that he may want to go with the pages of 8 1/2 x 11 and forget the smaller print trifold.
Anyway, I would appreciate your comments.
Bob
I see no problem with the creation of six separate documents and placing them in every panel of the 8.5 X 11 trifold. As long as each placed the document is created with the same size as a 1/3 to three components Panel. And I don't know it is not an international consortium of creating document evil overlords who will expose you to do.
However since you asked to talk technical, it would be considered a little on the non-standard side if sent to a printer. It could even be seen as hackney and amateur, but not too many print shops will tell you that because you pay for your print job.
However, this is not the place to pick up emotion a back rub for how to create a file. You would be better served by making the complete document (one document) and learning of the rapid means of keyboard shortcuts to navigate through the document. Using the space bar to activate the tool hand for the panorama, using the SPACEBAR and the command key together to bring up the zoom tool, by adding a shift of this combo to zoom back. These techniques can be very fluid navigation and eliminates the unnecessary task to create 7 documents where there should be only one. After a few days of repeated use these key combos should seem like second nature, and you'll wonder how you did without them before.
-
Questions about N3024 switch by default - originate BGP
Here is the configuration of the two switches. I set up and rising BGP, passing of prefixes. I want 1 switch to send a default gateway to switch 2 and have the default installation of command on the next statement are created. I don't see the 0.0.0.0 route by default in the show ip bgp sum command, but which is detailed in the configuration guide. However, I don't see a default route 0.0.0.0 in the routing table for switch 2 at all and an error message that there is no default route available. Would I be missing here?
Config is below:
SWITCH 1
Configure
VLAN 50
output
VLAN 50
name "switchtest".
output
hostname "Switch_1.
location 1/0 1! Dell network N3024
battery
1 1 member! N3024
output
IP routing
!
loopback interface 1
IP 10.0.0.1 address 255.255.255.255
IP ospf area 0
output
interface vlan 1
DHCP IP address
output
interface vlan 50
172.16.0.1 IP address 255.255.255.252
IP ospf area 0
output
router ospf
router ID 10.0.0.1
10.0.0.1 network 255.255.255.255 area 0
network 172.16.0.0 255.255.255.252 area 0
output
!
item in gi1/0/1 interface
Description 'Switch '.
switchport access vlan 50
output
Server SNMP engineid local 800002a203f8b1566f36c4
router bgp 65001
router BGP 10.0.0.1 ID
172.168.0.0 netmask 255.255.255.252
10.0.0.1 netmask 255.255.255.255
172.16.0.2 neighbor remote - as 65002
neighbor 172.16.0.2 are created by default
output
output
Switch_1 #show ip bgp
BGP table version is 7, local router ID is 10.0.0.1
Status codes: s removed, * valid, > best, i - internal
Source codes: i - IGP, e - EGP? -incomplete
Network Next Hop metric LocPref path origin
------------------- ---------------- ---------- ---------- ------------- ------
* > 172.16.0.0/30 172.16.0.2 1 100 65002 I
* > 192.168.100.0/30 172.16.0.2 1 100 65002 I
* > I have 10.0.0.1/32 0.0.0.0 1 100 I
* > 10.0.0.2/32 172.16.0.2 1 100 65002 I
Switch_1 #show ip bgp sum
IPv4 routing... Enable
BGP Admin Mode... Enable
BGP router ID... 10.0.0.1
Local AS number... 65001
Traps ......................................... Disable
Maximum paths... 1
Maximum paths IBGP... 1
Default Keep Alive Time... 30
Default hold time... 90
Number of entries of network... 4
Number of PATHS... 1
Default metric... Not configured
Advertise default route... NO.
Redistribution:
Dist metric list of source route map
--------- ---------- -------------------------------- --------------------------------
Neighbor ASN MsgRcvd MsgSent State down time Pfx Rcvd
---------------- ----- -------- -------- ------------- -------------- ---------
172.16.0.2 65002 78 82 ESTABLISHED 0:00:23:24 3
Switch_1 #show ip route
The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static
B - Derived E - from outside, AI - BGP OSPF Inter zone
E1 - OSPF external Type 1, E2 - OSPF external Type 2
N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2
S U - unnumbered Peer, L - flight road
* Indicates the best route (the lowest metric) for the subnet.
No default gateway is configured.
*10.0.0.1/32 C [0/1] directly connected, Lo1
B *10.0.0.2/32 [20/1] via 172.16.0.2, Vl50
10.0.0.2/32 [110/11] via 172.16.0.2, Vl50
*172.16.0.0/30 C [0/1] directly connected, Vl50
B 172.16.0.0/30 [20/1] via 172.16.0.2, Vl50
B *192.168.100.0/30 [20/1] via 172.16.0.2, Vl50
192.168.100.0/30 [110/20] through 172.16.0.2, Vl50
SWITCH 2
Configure
VLAN 50 100
output
VLAN 50
name "SwitchTest".
output
VLAN 100
name of the 'Switch '.
output
hostname "Switch_2".
location 1/0 2. Dell network N3024F
battery
1 2 Member! N3024F
output
IP routing
!
loopback interface 0
output
!
loopback interface 1
10.0.0.2 IP address 255.255.255.255
output
interface vlan 1
DHCP IP address
output
interface vlan 50
IP 172.16.0.2 255.255.255.252
IP ospf area 0
output
interface vlan 100
IP 192.168.100.1 255.255.255.252
output
router ospf
router ID 10.0.0.2
10.0.0.2 network 255.255.255.255 area 0
network 172.16.0.0 255.255.255.252 area 0
network 192.168.100.0 255.255.255.252 area 0
output
!
interface item in gi1/0/23
switchport access vlan 100
output
!
interface item in gi1/0/24
Description 'Switch '.
switchport access vlan 50
output
Server SNMP engineid local 800002a203f8b156530097
router bgp 65002
router BGP 10.0.0.2 ID
172.16.0.0 netmask 255.255.255.252
192.168.100.0 netmask 255.255.255.252
10.0.0.2 netmask 255.255.255.255
neighbor remote - as 65001 172.16.0.1
output
output
Switch_2 #show ip bgp
Version of BGP table is 9, local router ID is 10.0.0.2
Status codes: s removed, * valid, > best, i - internal
Source codes: i - IGP, e - EGP? -incomplete
Network Next Hop metric LocPref path origin
------------------- ---------------- ---------- ---------- ------------- ------
* > I have 172.16.0.0/30 0.0.0.0 1 100 I
* > I have 192.168.100.0/30 0.0.0.0 1 100 I
* > 10.0.0.1/32 172.16.0.1 1 100 65001 I
* > I have 10.0.0.2/32 0.0.0.0 1 100 I
Switch_2 #show ip bgp sum
IPv4 routing... Enable
BGP Admin Mode... Enable
BGP router ID... 10.0.0.2
Local AS number... 65002
Traps ......................................... Disable
Maximum paths... 1
Maximum paths IBGP... 1
Default Keep Alive Time... 30
Default hold time... 90
Number of entries of network... 4
Number of PATHS... 1
Default metric... Not configured
Advertise default route... NO.
Redistribution:
Dist metric list of source route map
--------- ---------- -------------------------------- --------------------------------
Neighbor ASN MsgRcvd MsgSent State down time Pfx Rcvd
---------------- ----- -------- -------- ------------- -------------- ---------
172.16.0.1 65001 83 82 ESTABLISHED 0:00:24:32 1
Switch_2 #show ip route
The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static
B - Derived E - from outside, AI - BGP OSPF Inter zone
E1 - OSPF external Type 1, E2 - OSPF external Type 2
N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2
S U - unnumbered Peer, L - flight road
* Indicates the best route (the lowest metric) for the subnet.
No default gateway is configured.
B *10.0.0.1/32 [20/1] via 172.16.0.1, Vl50
10.0.0.1/32 [110/11] via 172.16.0.1, Vl50
*10.0.0.2/32 C [0/1] directly connected, Lo1
*172.16.0.0/30 C [0/1] directly connected, Vl50
*192.168.100.0/30 C [0/1] directly connected, Vl100
Switch_2 #show ip route 0.0.0.0
The traffic code: R - RIP derived, O - OSPF derived, C - connected, S - static
B - Derived E - from outside, AI - BGP OSPF Inter zone
E1 - OSPF external Type 1, E2 - OSPF external Type 2
N1 - OSPF NSSA external Type 1, N2 - OSPF NSSA external Type 2
S U - unnumbered Peer, L - flight road
* Indicates the best route (the lowest metric) for the subnet.
No default gateway is configured.
No route found.
Solution:
Dell switches need to be turned on in the config.
router bgp * AS number *.
default-information originate always
-
Hello.
I have a problem where the best path to a particular destination is removed by BGP.
To explain.
Site A has 2 links to site B. 1 via a peer eBGP on MPLS, 2 via an iBGP during a backup VPN peer.
I configured the ebgp with a higher weight counterpart so that it is preferred.
The problem is the following.
When the ebgp peer link goes down, the connection via the ibgp peer is preferred.
When the link via the ebgp peer returns to the top, the path of the ebgp peer doesn't come back in the BGP table (in fact it dates back to a second and is then removed).
Could someone help me on this one.
Thank you
Lee
It would go something like this:
Country:
router bgp 65500
nearby MPLS map route setMed out
setMed allowed 10 route map
corresponds to the ip address 1
set 2 med
setMed allowed 20 route map
med game 1
permit access-list 1
RtrC:
router bgp 65500
nearby MPLS map route setMed out
setMed allowed 10 route map
corresponds to the ip address 1
set 2 med
setMed allowed 20 route map
med game 1
permit access-list 1
Let me know if you have any questions,
-
Question about local variable in LabVIEW
I am a new bie to LabVIEW.
I have a question about local variable in LabView.
I tried to stop a loop by the local variable, but the value of the loop for counter is different with my hope.
I think that the loop to stop at 6, but he stopped at 7.
Could someone help me?
This looks exactly like a race condition. You have know control if the control terminal is first in reading or the local variable is written to the first.
Try to run your code to highlight execution.
In your code, what usually happens is that order is read and the value is false. Then the other code will run allowing the value to write to the local variable. Let's say that in a particular loop iteration, we get the True value. But control of the final value has already been read as false, then the loop runs again. The next iteration of the Terminal is read and then he sees the true, will force to stop no matter what happens in the rest of the loop the loop.
So, why do you use a local variable instead of sending just the wire to the terminal stop?
-
An error occurred when DNS was questioned about the resource record (SRV) service location used to locate a domain controller Active Directory (AD DC) for the domain 'HAMI. LOCAL ".
The error was: "an existing connection was to be closed by the remote host".
(0 x 00002746 WSAECONNRESET error code)The query was for the SRV record for _ldap._tcp.dc._msdcs. HAMI. LOCAL
Hello
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Forums TechNet Windows 7 Technet.
Here is the link:
http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threadsHope this helps
-
Ask questions about the HP Pavilion 14-V041TX Bluetooth
Hello, sry for asking questions about simple things.
How to activate bluetooth for laptop HP Pavlion 14-V041TX?
Or how to bluetooth to detect other bluetooth devices?
coz already try to use my smartphone, but cannot detect any bluetooth device or laptop.
for what I know, I already install the driver for bluetooth.
Maybe there's another driver, that I'm missing?
Thank you.
SRY for my bad English.
HI @Ton1_qrenz ,
Welcome to the HP Forums!
It's a great place to find answers.
You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more
No worries about your English. I believe that I understand your question, and if not, you can specify if you must post back.
I understand that you are unable to detect Bluetooth devices.
Here is a document to help you with this company. There are links that it contains other documents that can also be of assistance.
Understand and troubleshoot Bluetooth wireless technology (8.1 Windows, 8, 7, Vista, XP)
If the problem persists, try the following steps.
Step 1. Go to Device Manager
Step 2. Right click on "Bluetooth device" you want
Step 3. Select "update driver software... »
Step 4. Choose "Browse my computer for driver software".
Step 5. Choose "Let Me pick from a list of drivers for devices on my computer.
Step 6. Select "Ports (COM & LPT)"
Step 7. Select "Microsoft" to the list of "manufacturers".
Step 8. Finally select "Standard series via a Bluetooth connection.If you are unable to connect to a Bluetooth device, try the following:
Step 1. Search for 'Change device' in the start menu in Windows 8.
Step 2. Click on where it says change device installation settings.
Step 3. Select No, let me choose what to do option.
Step 4. Check the automatically get the device app option
Step 5. Click on save changes to save the settings that you selectSo, you can try this
Step 1: Go to RUN (Windows Logo + R) and type "services.msc" and Enter
Step 2: Now find 'Bluetooth Support Service' and double click it
Step 3: Now click on the Log on tab and type "Local Service" without the quotes
Step 4. Click on "account".
Step 5: Now remove any authorization of passwords the password field blank
Step 6: Below the upper left title should be a hyperlink 'Start' clickYou can also view tab management power and unchecked the box "Allow the computer to turn off this device to save power."
If it is still not resolved, I suggest contacting HP support for further assistance.
Please contact our technical support at the 800-474-6836. If you are outside the United States / Canada region, please click the link below to get help from your region number. Phone goes everywhere in the world
Good luck!
-
Hello guys,.
Today at awkward work something caught my attention.
The situation returns to BGP, when I run the command sh ip bgp, the output gives me this:
RT52162 #sh ip bgp
Version of BGP table is 56, local router ID is 10.10.0.16
Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.
r SIDE-failure, stale S
Source codes: i - IGP, e - EGP,? -incompleteNetwork Next Hop path metrics LocPrf weight
* 0.0.0.0 172. **. 161 50 0 15 * 15 * 5 5 65010?
*> 172.**.***.169 0 15**5 65010 ?
*> 10.**.0.16/32 0.0.0.0 0 32768 ?
*> 10.**.0.0/16 0.0.0.0 0 32768 ?The part "BOLD" of the output is exactly the same thing, and this connection works on ATM.
I can't understand this question, so if someone could explain to me why this is happening or how can we solve it, I have other sites configured the with the same configuration and it gives me the same exact result.
Hello
The nearby 172.xxx.xxx.161 done AS_PATH adding by adding at the beginning of his time number one DID when advertising the default route so it is considered to be a neighbor of backup.
Concerning
Alain
-
Question about DISCHARGE (expr, 1016) function
Hello
I have a question about the DUMP function, specifically the DUMP (expr, 1016). What character set is the function of report? The only logical answer seems to me the characters of data. The http://download.oracle.com/docs/cd/E11882_01/server.112/e17118/functions055.htm#SQLRF00635 docs it says: "by default, the return value contains no character set information. To retrieve the name of character of expr, add 1000 to all the values of previous format. "For example, a return_fmt of 1008 returns the result in octal * and provides the character set name of expr.*.
I ask this question because a client complains that there a database with database EE8MSWIN1250 (obtained from DATABASE_PROPERTIES) characters and when I asked him to run a SELECT that could empty the contents of a column, he gave me this result:
Now I can't imagine how the data can be stored in the AL32UTF8 character set if the characters of the database are EE8MSWIN1250. This scenario is still possible? I tried in vain to reproduce on my test database.select dump(some_col, 1016) from some_table; Typ=1 Len=8 CharacterSet=AL32UTF8: c5,bd,c5,a0,54,45,53,54
I don't know if the column is defined with the characters of database or the national database characterset, but even if it was a NVARCHAR2, the dump function could not return AL32UTF8 since he is not a national character set.
If anyone has an explanation, I will be very grateful.
Thanks in advance and best regards,
Swear1. to help with the confusion about the DUMP function: index realizes that the DUMP function can be performed in the remote database. Oracle tries to push as many functions as possible and semantically correct on the remote site. Therefore, it sends the statement of simple table on the remote site after stripping the DB link. In this case, the DUMP function sees the character set of the remote database and creates the resulting string of information. This string of AL32UTF8 to EE8MSWIN1250, as described in the note, but as all the characters in the string of information are pure ASCII, some codes are actually changed.
Things get more interesting if you start to combine the tables of local and remote databases. For example, the following query is will normally return the character of local database defined for the two columns:
select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual x, dual@dblink y);
This is because the first dual@dblink is transported to the local site and the join is performed here with application of DUMP.
The following query returns the set for two columns of characters in remote database:
select dump(xx,1016),dump(yy,1016) from (select x.dummy xx, y.dummy yy from dual@dblink x, dual@dblink y);
This is because all the tables are remote and the entire query is sent to the remote database and y.
The following query returns the remote character set thus:
select dump(xx,1016),dump(yy,1016) from (select /*+driving_site(y)*/ x.dummy xx, y.dummy yy from dual x, dual@dblink y);
Here, the DRIVING_SITE hint asks the database to perform the join in the database of the table, for example dual@dblink.
2. to answer your question:
Your understanding of the way of conversion is generally correct, but conclusions are not quite correct. In the scenario [client EE8ISO8859P2, EE8MSWIN1250 local database, remote database AL32UTF8], Eastern and Central European characters will work correctly, but the other characters to the remote database will not be (for example, French, Greek, Chinese). It is, I think, quite clear and is usually not a major problem, as usually only compatible languages EE8 are interesting for an EE8ISO8859P2 customer. However, in the scenario [customer AL32UTF8, EE8MSWIN1250 local database, remote database AL32UTF8], the problem becomes more visible. Having a taking customer support Unicode, you can recover some data French or Greeks of the remote database but you will fail as all of these characters will be "killed" by the conversion of distance at the local level (link DB conversion).
EE8ISO8859P2 is also for the same group of languages, such as EE8MSWIN1250, indeed, but it lacks some interesting characters. The most important of them is the symbol of the Euro. Others are "' quotes, long dashes, TM symbol, and a few other less frequently used punctuation. Therefore, always define a database as EE8MSWIN1250, even if you run some clients (Unix) with EE8ISO8859P2. Do not run Windows with EE8ISO8859P2 clients, except for purposes of loading/generation of special file.
-Sergiusz
-
Questions about Stor.e TV +.
Does anyone have a contact point to raise a complaint about the lack of service from Toshiba? I spent £160 on a TV + Stor.e and did have some problems with it, as you can see from the few posts that I raised. After spending £160 on a point I don't understand why if the forum is the only option to support what he is no Toshiba engineers on this issue, who are able to answer my questions. I do not expect a 24 / 7 hotline for £160 I spent, but it would be good to know that a Toshiba engineer could answer my questions about their products. Especially since it's the second one I had which suffers from a cosmetic defect, I had to stick to feet about it as the Unit came with 4 pads ride around the box. I also have my doubts about the HDMI because it seems to be very sensitive to any movement in the area, causing the connection to remove.
I got a Western Digital box media for more than five years and had no problem with this, the only reason why I changed, it was to make use of the connection to the local network, the HDMI connection and the fact it supported more than file formats. FSR this device was abit of a disappointment for me. So if someone could point me in the right direction, I would be very grateful.
Hello
I can understand that you are not happy with the current situation and usually if you buy a product it should properly expect and do no problem.
As you probably already seen here it s a user to only user forum. This means that you can speak with normal people like you and me and there is no official support from Toshiba.
In your case, it would be best if you contact an authorized service provider or call the Toshiba UK. The phone number, you can find on the site of Toshiba UK Web:
http://UK.computers.Toshiba-Europe.comJust give the guy a call and explain your situation. I'm sure they can give you a detailed answer and if your TV Stor.e + must be repaired or not. When warranty hardware repair is free.
I hope I could help you a little bit :)
Maybe you are looking for
-
Satellite L300 PSLB8A - cannot locate the WLan adapter after downgrading from Vista to XP
Model - L300 Satellite PSLB8A-01F004Australian modelPlace of residence current UK Happy new year to you all. I have a problem with the adapter wireless following a downgrade from Vista to XP Pro home. Device Manager indicates that a network adapter,
-
My mini ipad is stuck in recovery mode!
My ipad mini has been slain in recovery mode after that my friend turned it off during the ios 8.1 update. Connected to itunes on my pc and he said he had to be restored and updated. Wait for the software to download, but an error occurred that preve
-
Is the Migration Wizard write in any newspaper?
When you migrate the data, is the migration wizard save anywhere (the console log) how it happened and whether or not it was successful? I did a migration during the night operation, and when I arrived, the computer was switched off (power off). I ne
-
I sent an email to someone by mistake, how to retrieve the email until the receiver reads?
-
"Input string was not in a correct format." When you access certain Web sites.
"Input string was not in a correct format.". laugh the error im getting whenever I tired to open some pages as my emails help me pls im on average in computer science