BI and cloud control

Similar Questions

• Tab performance Cloud control 12 c

  Hi guyz,

  How can I activate tab Performance EM Cloud control 12 c? Do I need a license or is there a light version?

  In Grid Control 11g that it was easy to activate.

  Thank you in advance.

  Could you please confirm the diagnosis Pack of database and Oracle Tuning Pack is enabled for the database.

  The configuration-> administration-> Management Pack Access Pack

  To activate the Oracle Database Management Pack:

  In the configuration menu, select Management Packs, and then select control of Cloud Management Pack Access.Enterprise Manager displays the package access management page.

  Page Access Management Pack, in the look for list, select database ===> it will be lists that all databases Oracle target monitored.

  Of the table, to select your database Oracle target and activate the Pack diagnoses Oracle, Oracle Database Tuning Pack and click on apply.

  For the license information on the Diagnostics Pack, Oracle and Oracle Tuning Pack

  Ref:

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24474/TOC.htm

  Understand the Management Packs in Enterprise Manager (dbconsole, control grid and cloud control) (Doc ID 1566956.1)

• Installation Cloud Control agent 12 c on other blades thru RPM file and answer sets name of the bad cluster

  Hello

  I hope someone can help me with this. We have installed Cloud control 12 c em and its agents on various machines.

  First, we conducted with the target part two nodes of a network Infra cluster (let's call it proclu_1). Operating system is RH6.

  Then, using the same method (1 / y yum install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm then)

  2 / /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we have installed the agent on the other 2

  blades that are part of another cluster (proclu_2). The agent.properties file that precedes contained only the usual key-value lines:

  OMS_HOST = omsmachine.stuff.be

  OMS_PORT = 4889

  AGENT_REGISTRATION_PASSWORD = ametemp

  AGENT_USERNAME = oracle

  AGENT_GROUP = oinstall

  AGENT_PORT = 3873

  ORACLE_HOSTNAME = promachine.stuff.be

  Now, if I change to the/usr/lib/oracle/agent dir and search for the name "proclu *" from there, I found the name of the

  First install (on the first cluster of proclu_1):

  [oracle@bladb0406 officer] $ pwd

  / usr/lib/Oracle

  [oracle@bladb0406 oracle] $ find. -name "proclu_1."

  ./agent/agent_inst/SYSMAN/EMD/State/has/proclu2/cluster/proclu

  ./agent/agent_inst/SYSMAN/EMD/State/configstate/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/EMD/State/statemgmt/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/log/targets/cluster/proclu_1

  My questions:

  1 / the first two nodes (blada0204 & blada0406) in our first group this 'find' send him back

  same directory names with "proclu_1", this is what we expected: where to look for the agt oracle script

  our cluster name?

  2 / why he put the name of 'proclu_1' even - and evil - on our other two nodes (bladb0204 & bladb0406)?

  (us have expected 'proclu_2'...)

  Is there a way to fix this, or should I reinstall the agent (after you set/change something somewhere

  While it contains the name of the correct cluster...) ??

  Thank you very much.

  Kind regards

  SEB

  Unfortunately, this goes back to the RAC install procedures.   Check the name of the cluster for each cluster.   If they are all the same, installed, then you will need to manually discover/change name when you promote so that your clusters are unique in EM.

  To verify the name together for clusterware installation:

  / bin/cemutlo n

• Installation of database 12.1.0.1 and EM Cloud Control

  Hello

  I installed Oracle 12.1.0.1 for Windows 64. Database and the work of the MS Express. Next i tried to install the cloud EM 12.1.0.1 control, but there are errors during the installation process on the repository. EM 12.1.0.1 not does support Oracle Database 12.1.0.1?

  I use EM 12.1.0.3 with database 12.1.0.1 instead? What combination works for Windows?

  Is a virtual machine, including 12 c database and EM Cloud Control available for download?

  Best regards

  Eli

  Hi Eli,

  Monitoring is done by plugins (on the side of the agent). You can download in EM Cloud Control, (if the server can connect to Oracle if not you can use the method in offline mode) and deploy the necessary plugin (plugin 12.1.0.4 database) to the agent.

  See Enterprise Manager Cloud control 12 c: deploy a Plugin - YouTube

  and http://docs.oracle.com/cd/E24628_01/relnotes.121/e39348/toc.htm (DB 12.1.0.4 plugin release notes)

  On the virtual machine: I think it's a race (so compleet) VM, meaning that it is a CMS and a repository. You could add targets yourself. This can be one on another virtual machine, but it is to you what you want to do.

  Eric

• Cloud Control 12 c and change IP address

  Hello!
  
  Please let me now what Enterprise Manager Cloud control 12 c release components
  I should to reinstall when the SGD server's ip address has been changed?
  
  Thank you and best regards,
  Pavel

  Hello

  If you have changed only the I.P. address (ie. the host name has not changed) no re - install is necessary.

  Kind regards
  Select this option.

• Cloud Control 12 c and Middleware as a Service

  Cloud Control (version 1) 12 c brings Middleware as a Service?
  
  Thank you very much

  I think the question was about the functionality of middleware-as-a-service cloud. It will be available soon. If you are interested to be a customer of the beta, please let us know.

• Cloud Control 12 c

  Hi all

  I use Oracle Cloud control 12R5 and I need help with corrective measures.

  Q: I need to run a script that is located in the machine that hosts the control of cloud and not the objective that the incident occurred. Is it possible to do?

  Thanks in advance.

  You can not.  Your choice is, distribute the script for all servers and run via the single command in the corrective action.  Or, put the script in the corrective action so that everybody calls him together, instead of a single cmd call a script.

• Cloud Control 12 c, host on suspended state

  Hi guys,.

  I have a 12 c Cloud Control Facility.

  Recently, I update server plugins for 12.1.4.7 version and then I upgraded agent plugins for 12.1.4.7 version.

  Update was very good, but now, agent status is "interrupted".

  

  Other guests and agents, who have still not improved, works very well (active status).

  Agent is not blocked.

  emctl status agent

  

  So, guys, any ideas?

  Thank you.

  Hello

  Could u pls try to manually start the collection.

  emctl control agent runCollection

  Check if the measurement of the response is still running

  Emctl status agent Planner | Response from grep

  Try to download the agent

  Download emctl agent

  Pls check the log files from the command above and let us know...

  Also, OEMS, have you tried to end the blackout?

  Concerning

  Krishnan

• Install the Cloud control 12 c high availability

  Nice day

  I install cloud control high availability, but when I install the third-party certificate services are not available when I check for HTTP.

  I followed the following guidelines:

  Deployment of a cloud of highly available 12 control Enterprise Manager:

  http://www.Oracle.com/technetwork/OEM/framework-infra/WP-em12c-building-HA-Level3-1631423.PDF

  And third-party certificate configuration, note:

  NOTE: 1399293.1 -EM 12 c Cloud control how to create a portfolio with certificate of third party trust that can be imported in the WHO of communication SSL?

  I have a few questions

  How can I change the CA in the OMS?

  How to export the certificate and key?

  Can someone help me, please

  Best regards

  Alexandra Granados

  Hello

  Please follow the steps below...

  EM11g / EM12c: utility ORAPKI to create a portfolio with third party to trust certificate and import into OMS [ID 1367988.1]

• What is the difference between EM cloud control vs what MS Ops center

  Hello community,

  What is the difference between EM cloud control vs what MS Ops center

  I was looking for this and did not get the right answer

  Kind regards

  Ben

  Hi Ben,

  You can find the oracle's response in this thread of the community: https://community.oracle.com/message/12025608#12025608

  Concerning

  Borys

• Cloud control rule waiting/pause prior to the notification of incidents connection rule

  Can I set up a cloud Incident control waiting, maybe 10 seconds, before rule of triggereing a connection failure / inaccessible? We sometimes have errors of transient connection to monitored hosts, and I get inaccessible agent and other errors, which are erased a few seconds later. I therefore really Cloud Control to pause and try again before you trigger the rule.

  There is probably a way to run an external script, but if it is possible to do with CC, it would be preferable.

  Cloud Control 12.1.0.3.0

  Hi Duncan,.

  In MS 12 c, you create a rule to send a notification and/or to create an incident once opened an event for a specified period of incident. See this blog for an example.

  Related doc (see 3.4.8.7 with a time delay):

  http://docs.Oracle.com/CD/E24628_01/doc.121/e24473/incident_mgmt.htm#EMADM12122

• How to create an incident rule to control of the 12 c Cloud Control alerts log errors

  I have a feeling it will be blinding in retrospect. I have 12 c Cloud control effective against a dozen guests and many DBs I have a rule defined for a database Instance that contains many points of interest - such as FRA filling. I chose each alert metric to see with the alerts log, including 'Generic Alert Log Error'. But I get error messages that appear in the alert log, as ORA-10173.

  Also, is there somewhere in the doco, or a data dictionary view, I can list all the parameters available?

  Thanks, helped these docs. It seems that Oracle has replaced generic monitoring with specific elements of monitoring, but it lacks some interested. However, the doc shows how this can be turned on again. Shame that it's hidden.

• OEM recommended 12 c Cloud Control Monitoring

  Hi all

  We are in the deployment process of models in OEM 12 c (version 4) for, among other things, CRM, BRM, DPOS, OSM, UIM, WCC, BEEP and FMW of surveillance.

  Is it perhaps all best practice documentation out there for what to monitor for each component? My apologies if my terminology is not quite to the height, I don't have much experience with OEM other than monitoring of databases with tools out-the-box, but I understand that there is no so-called management packs for most, if not all of the above, and that the installed agents will likely include things like CPU usage , memory and disk etc, but I am concerned about something else, that we might need to monitor.

  If there is some kind of guide to application of control specifically for each of these items, I think this should help me tremendously.

  Thanks in advance.

  There are certified/recommended models available for many objectives in the company-> monitor-> oversight models.  For example, Ebs, SOA, etc.   I suggest you look at those to begin with.  For DB, Cluster, RAC, etc. recommended are the default settings, so you can create a model of these default values by going to oversight as models above, select Create, and then select the option to create of target Type.  This will allow a drop-down list to select category (database) and then target type (for example database Instance).  Then all the metrics available db will be responsible, with departure recommended thresholds.  Of course, every company has different indicators or thresholds, so there is not 1 correct answer, but it's a good starting point.

  Key points to remember-

  -default incident rule provided by oracle takes no action on warning events

  -recommend create as on rule Inc. and create your own you can adjust/edit, and then clear out of box

  -If you get too many alerts/emails, adjust thresholds or remove thresholds to stop completely to the supervision of models

  -only to set thresholds for the items you will actually act on

  -use reports for others

  Few things I recommend to read:

  Strategies for Scalable, followed more intelligent by using Oracle Enterprise Manager Cloud control 12 c

  Zero to the ease of management - http://www.slideshare.net/CourtneyLlamas/zero-to-manageability-in-60-minutes-building-a-solid-foundation-for-enterprise-manager-12c

  Beyond the Basics: Making the Most of Oracle Enterprise Manager 12csurveillance - CON8138

• installation 12.1.0.4 Oracle enterprise manager cloud control on solaris 64-bit of the sparks

  Dear all,

  
  

  We have a 10.2.0.5.0 Server Enterprise edition db Oracle Solaris spark 64bits.

  We want to install Oracle enterprise manager on that server by using the server db as the repository FRO the EM server.

  
  

  We are download release of the EM below. So my question is that this version of the MA that we download is valid for this version of the OS, or we need to download another version.

  
  

  And you can share a best tutorial to install the EM 12.1.0.4 in 10.2.0.5 db repository on Solaris spark 64bits.

  
  

  Oracle Enterprise Manager Cloud control 12 c Release 4 (12.1.0.4)
  for Solaris (SPARC) operating system

  http://www.Oracle.com/technetwork/OEM/grid-control/downloads/Solsoft-094433.html

  Future prospects for expert advice.

  Regarding

  Nimai kinzonzi

  Yes it is a valid combination. Please follow the installation guide.

  http://docs.Oracle.com/CD/E24628_01/install.121/e22624/TOC.htm

• Change the settings of catalog of recovery for all DBs in EM Cloud control 12 c

  Hello

  A project to migrate our RMAN recovery catalog (11.2.0.3 database) to the CAR, I need to update the Manager of the company with the new catalog of recovery settings. So far I couldn't find how to change it for each database individually, which will be your time to 40 + databases! I found this doc metalink [Doc ID 840051.1] on how to do it in the EM grid control, but don't find anything on how to do this for Cloud control 12 c.

  Does anyone know how to do this? Pointers would be much appreciated.

  Thank you

  Robin

  Hi Robin,

  This should also work for Cloud control 12 c.

  -Go to the homepage of the EM.

  -In the target tab click on databases.

  -In availability tab click 'Catalogues of recovery. "

  -Edit and modify data

  Concerning

  Stefan