Installation of database 12.1.0.1 and EM Cloud Control

Similar Questions

• How to day/change the descriptor of connection to a database to target CARS in Cloud control

  I have Cloud control 12 c than Release 3 implemented and followed by many hosts and targets. However when monitoring my RAC (2 knots), it cannot connect to database instances (although it shows them only up to). I get the message "IO error: the network adapter could not establish the connection. I see that the connect descriptior using vip, rather than the host name.

  How can I update the connection descriptor in Cloud control to the correct values?

  Change the following configuration control listed below note

  How to change/update Configuration of the analysis of a target database or the listener in 12 c Cloud Control (Doc ID 1385769.1)

• My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it

  My MacBook froze during the installation of the update at El Capitan and now I am unable to connect to any except the screen of the guest user. There was a message of panic, and somewhere in there, he said no set of OS. I tried to start without danger, it does not work either.

  This general situation may be similar to what is mentioned in this sequel to thread of the CSA

  and if the remedy is to use instructions; detailed and I hope they are correct...

  Re: Restart fails after installation of El Capitan help!

  Or you can try and see on the repair of the system and then if your disk utility can

  See the Macintosh HD, as a boot volume, you could restart from OS X Recovery to

  the Mac system, to see if this solves the problem. There may be more than one cause.

  You could try and boot into OS X Recovery, utilities out there, and other options are available.

  • OS X: on OS X Recovery - Apple Support

  This example uses a special partition on the hard drive of recovery which is not in the

  same disc that the Mac OS X section; However if your hard drive is missing, these other

  items may also be at risk. You must have and maintain backups of your duplicate content

  on the external storage drives closed; In addition, a Time Machine backup helps to restore.

  • Apple OS X and Time Machine tips:

  http://pondini.org/OSX/home.html

  • Tips for OS X - using HD recovery:

  http://pondini.org/OSX/RecoveryHD.html

  {Using the utility disc and other tools can be done from the boot OS X Recovery volume

  Beware of the fact these tools can also delete or reformat your content; wiping.}

  Don't know what to say; you could see visiting an Apple store with genius if

  There is an official store. Usually for best time planning you would contact them for an appointment.

  • Make an appointment at an Apple Retail Store Genius Bar
  • Find an Apple authorized service provider
  • https://locate.Apple.com/country - Apple - find places - selector of country (if outside the U.S.)

  Or if there is no official retail Apple Store with genius, the following suggestion would be to contact

  a service provider authorized Apple, an independent specialist who is qualified in the repair of Apple.

  In any case...

  Good luck & happy computing!

• XP Reinstall or repair the installation, all the keys show as zero and will not turn on!

  I do installs repair and re - installs several PCs in the last days, and none of the license keys are coming as valid, though even I am sure they are (the PC came directly from Dell).

  Now, I have one, I did a repair install, though I have the correct cd (oem, oem cd installation), the key showed as not valid for repair so I used the public keys of http://technet.microsoft.com/en-us/library/bb457096.aspx to complete the installation.

  Now, however, I can not connect to Windows. It won't let me open a session as long as I go through the product activation and activation says that my (valid) key is not valid! I would use the key update tool, but cannot connect to use it!

  It said that the key which is on my COA which has been on the Dell PC is not valid? It's a bit infuriating. The first couple I gave up and used nine keys of unopened copied of XP that I have, but I'm out of those now and in any case the old keys must be still valid! Unless MS is turn off old keys to sell more. Seems pretty shady to me.

  More information is needed, such as:

  1. is the Dell keys to products for Windows XP Home Edition or Windows XP Professional?

  2 is the OEM Windows XP CD, you are using a Windows XP Home Edition or a version of Windows Professional?

  3. what level of Service Pack is installed on the CD that you are using? 1, 2 or 3?

  4. have you tried to use the Windows product key update tool ?

  5. have you ever tried to activate by phone: How to activate Windows XP by phone

  Carey Frisch

• During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry. How can I do this?

  Original title: Registery Error Message

  During startup, I get an error message that the registry database cannot find a file and modify registry to delete the reference to the file in the registry.  How can I do this?

  Hello

  • What were the changes made before the problem occurred?

  I recommend you perform the clean boot.
   
  Configuration of your system in a clean boot state helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.
   
  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:
   
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135 
   
  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• acrobatprodc installer does not much with the network and cpu disk and 0 byte 0%

  I am usin win10 pro 64-bit and I noticed that Manager tasks shows the installer as being 32-bit, even if no error or complaints have been question by the installer to start. It's truly something or should I kill and look elsewhere for my needs

  Only a few programs are 64-bit - -system requirements | Adobe Creative Cloud scroll down and check each program

  In regards to Cloud Setup does nothing, a few ideas below

  Please read https://forums.adobe.com/thread/1499014

  -try some steps such as changing browsers and disable your firewall

  -also clear the cache of your browser if you start with a fresh browser

  -Run "Difficulty Host File" option https://helpx.adobe.com/creative-cloud/kb/cc-cleaner-tool-installation-problems.html

  http://myleniumerrors.com/installation-and-licensing-problems/creative-cloud-error-codes-w ip.

  https://helpx.Adobe.com/creative-cloud/KB/creative-cloud-desktop-application-failed.html

  http://helpx.Adobe.com/creative-cloud/KB/failed-install-creative-cloud-desktop.html

  or

  A chat session where an agent can remotely look inside your computer can help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• I need help I get error 6 installation program and creative cloud 1 error.

  I need help I get error 6 installation program and creative cloud 1 error.

  Code 1 https://forums.adobe.com/thread/1434528

  6 http://helpx.adobe.com/creative-suite/kb/errors-exit-code-6-exit.html code

• Hi, I have bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy. I expect that when I pay 129 euros for the LR I can install it easily and not

  I bought LR6 and installed cloud creative ok, but when you go to installation of Lr, it allows only one installation of the trial version, the other options are to buy.

  Serialize Lightroom trial to activate like Lightroom 6 CC

  https://helpx.Adobe.com/Lightroom/KB/serialize-Lightroom-CC-trial-to-activate-as-Lightroom - 6.html

• Installation Cloud Control agent 12 c on other blades thru RPM file and answer sets name of the bad cluster

  Hello

  I hope someone can help me with this. We have installed Cloud control 12 c em and its agents on various machines.

  First, we conducted with the target part two nodes of a network Infra cluster (let's call it proclu_1). Operating system is RH6.

  Then, using the same method (1 / y yum install /tmp/oracle-agt-12.1.0.3.0-1.0.x86_64.rpm then)

  2 / /etc/init.d/oracle-agt RESPONSE_FILE=/usr/lib/oracle/agent/agent.properties) we have installed the agent on the other 2

  blades that are part of another cluster (proclu_2). The agent.properties file that precedes contained only the usual key-value lines:

  OMS_HOST = omsmachine.stuff.be

  OMS_PORT = 4889

  AGENT_REGISTRATION_PASSWORD = ametemp

  AGENT_USERNAME = oracle

  AGENT_GROUP = oinstall

  AGENT_PORT = 3873

  ORACLE_HOSTNAME = promachine.stuff.be

  Now, if I change to the/usr/lib/oracle/agent dir and search for the name "proclu *" from there, I found the name of the

  First install (on the first cluster of proclu_1):

  [oracle@bladb0406 officer] $ pwd

  / usr/lib/Oracle

  [oracle@bladb0406 oracle] $ find. -name "proclu_1."

  ./agent/agent_inst/SYSMAN/EMD/State/has/proclu2/cluster/proclu

  ./agent/agent_inst/SYSMAN/EMD/State/configstate/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/EMD/State/statemgmt/cluster/proclu_1

  ./agent/agent_inst/SYSMAN/log/targets/cluster/proclu_1

  My questions:

  1 / the first two nodes (blada0204 & blada0406) in our first group this 'find' send him back

  same directory names with "proclu_1", this is what we expected: where to look for the agt oracle script

  our cluster name?

  2 / why he put the name of 'proclu_1' even - and evil - on our other two nodes (bladb0204 & bladb0406)?

  (us have expected 'proclu_2'...)

  Is there a way to fix this, or should I reinstall the agent (after you set/change something somewhere

  While it contains the name of the correct cluster...) ??

  Thank you very much.

  Kind regards

  SEB

  Unfortunately, this goes back to the RAC install procedures.   Check the name of the cluster for each cluster.   If they are all the same, installed, then you will need to manually discover/change name when you promote so that your clusters are unique in EM.

  To verify the name together for clusterware installation:

  / bin/cemutlo n

• CS5 install Fail: installation met an error(-1) during installation. If please restart the computer and try again.

  Running CC of Photoshop and Lightroom CC on a MacBook Pro (with CS5/Adobe Bridge).

  Adobe Bridge broke so I uninstalled the full program of CS5 and when I try to reinstall from the CD, I get the dreaded installation met an error(-1) during installation. If please restart the computer and try again. "message.

  Have not been able to find a solution for the moment. Any help would be greatly appreciated,

  Thank you!

  [Duplicate message deleted... post the same question more than once is confusing... MOD]

  [This is an open forum, not a direct line to Adobe support... you have to wait a response]

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

• I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do th

  I just switch to CC to photographers. I downloaded and uninstalled Manager creative cloud several times and whenever I do tab apps under creative cloud wrote "the installation is no longer functional. Uninstall and reinstall... I continue to do this with the same results

  Please follow the steps below.

  1. Follow the Solution 1 and 2 of error: "unable to install". Creative Office Cloud
  2. Install Creative Cloud Desktop Application using Download Adobe Creative Cloud apps | Adobe Creative Cloud free trial

  Hope this will help you.

  Kind regards

  Hervé Khare

• Advanced POS 5.8 only sees the system databases in SQL Server 2014 and fails when attempting backup

  We have upgraded to VDP 5.8 has progressed today and installed the new SQL agent in 3 different SQL servers.  Two SQL Server 2008 work well with VDP machines - he can see all databases.

  But when I try to create a backup of the SQL Server 2014 computer, by selecting individual databases, the VDP device (such as it is controlled through vSphere Web Client) sees only the three system databases

  Master, MSDB and Temp.  And when I tried to back up the master database, the process has failed with an error various non-expose of reasons.

  Is there something special about setting up SQL Server 2014 to be backed up by advanced VDP?

  See M80ARM - Warrior of Virtualization: VDP Advanced SQL Agent permissions

  Basically, you need to either run the 'Backup Agent' service in a context that had rights to the SQL Server or you have enable the NT AUTHORITY\SYSTEM account with rights on the SQL Server.  Not obvious in the documentation, but that solved for me.

• Database update issue with JavaScript and local storage

  Hi all

  I come from a PHP background and a newbie with HTML5 and JavaScript, and local storage

  
  

  Currently I'm building a mobile web application that uses a remote database.

  I have a question about the update database.

  Currently, I set it up so that when the user logs on successfully - Local Storage fields are loaded from the remote database query using a jQuery.Get. This seems to work well.

  When it's time to update the data, I fill the form in local storage, allow the user edit fields, then:

  -a form post to send data to the remote php page that updates the database...

  Here is where I have a question: How can I make sure the edit went through good - what is better to do it now?

  -Can I set up a json response to say whether or not the update was successful

  or

  -Query the database once more and recover the fields to compare the edit results

  or

  -Another technique to do of course change it went through OK

  - then if successful, I can update the local storage

  Q: what is the best way to ensure that the database has been correctly updated (and also not lose time with Access database useless)?

  Is there a recommended for this?

  In addition, if possible this beginner can use a clear example...

  Why not to use jquery get () callback status where if the success is returned then to update local storage?

  best,

  Shocker

• I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

  I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

  See link below and check:

  https://forums.Adobe.com/thread/1848277

• ASUS new comp, windows 8.1... try to install Adobe photoshop CC (installed 42%), lightroom CC and creative cloud with msg:ERROR combo: third payload Installer vcredist_x64.exe failed with exit code:-2147024546 and msg:ERROR: cannot install microphone

  New Asus windows 8.1 desktop computer... try to install Adobe photoshop CC (installed 42%), lightroom CC and creative cloud with msg:ERROR combo: third payload Installer vcredist_x64.exe failed with exit code:-2147024546 and msg:ERROR: failure to install the Package redistributable Microsoft Visual C++ 2012 (x 64). Please try to install by double-clicking the executable file to "C:\Users\Milan\AppData\Local\Temp\{12D1155A-EC7D-48B0-B8A9-1738A801773A}\Photoshop_15_LS 20_win64\Adobe CC 2014\payloads\Microsoft VC 2012 Redist (x 64) \vcredist_x64.exe", or download and install the 2012 Microsoft Visual C++ Redistributable Package last (x 64) Microsoft Web site - www.microsoft.com.

  When you try to install MS Visual C++ Redistributable Package 2012 on my computer it comes to msg: you cannot run it on this PC... Please HELP Milan

  Hi Milan, please share the OS version so that we can help you properly. Check: How to fix error download creative cloud?

  Let us know if you still get the same message.

  It's you

  Atul_Saini