'BI answers' data not updated

Similar Questions

• Data not updated blackBerry Smartphones when inactive phone

  Hi all

  Recently, I removed my main of my device e-mail address while he is on vacation.

  I just put back it, but now I find that data (emails and BBM) are not updated when the phone was in bag for awhile.

  If I put myself in response to or sending emails or BBM of unit all starts update again and all emails in circulation and BMMs come out at the same time.

  Everything working the normal flow is restored, but after being in the Pocket for awhile everything stops again.

  Any ideas?

  I noticed the problem when I started getting these archaic messages called SMS asking me why I do not answer to my BBM... naturally the idea of not receiving them is scaring me senseless!

  Kind regards

  Erik

  Hi and welcome to the forums!

  We need to know what version of the software on your device.

  Check the version of operating system of the device, and then use the correct steps to register your device. Basically, you refresh your network connection and the software to control the connection on your device.

  Thank you

  Bifocals

  KB23393 How to check the version of the BlackBerry Device Software installed on the BlackBerry smartphone

  KB00510 How to register a BlackBerry smartphone with wireless network

  KB02141 How to reset a BlackBerry smartphone

• The calendar icon date not updated?

  I just noticed the date on the calendar icon in the Launcher Launcher Quick/wave is not up-to-date.  It is currently stuck at 29, even though the date on my Pre is correct (7/1).  Is it possible the 1.0.4 update borked it?

  Will try a reboot and see if that helps.

  A reboot solved the problem - the icon now shows the correct date.  Look to see if it will update tomorrow as it should.

• SQL data not updated in IE but OK in Chrome

  I created a Flash vote function that writes the user votes for and bed curent them average of SQL database. Every time you vote, average should add the new vote and changed. It works well with chrome, but not in Internet Explorer. Refresh the window does not work. The only way to show new data must exit the browser and start it again.

  I checked the temporary internet files folder and found the only way to update without leaving every time is to remove the ASP which query the SQL cache database.

  Is there a way for Actionscript force reload the ASP every time?

  Thanks for your advice!

  Add a query string evolution to your call of the asp, for example

  URLLoader.Load (new URLRequest ('your_asp.asp? qs ='+ Math.random ()));

• Data not updated report

  I'm creating a reporting utility that retrieves data in a temporary table and generates tables with double entry, summaries of charges and graphic. I can run a cross-analysis of age against the language and the results look very good. If I change the crosstab to be race vs age, I get results, but they continue to receive language vs. age.
  
  After the recovery, the data in the temporary table are age against the race. If the data is OK. But when the crosstab is built, it returns the results of the previous run.
  
  This forum works on CF version 5 at the present time.
  
  
  

  Problem has been resolved. Cachewithin value was too large.

• Planted in the middle of the intallation: "could not update the registry data.

  My hard drive was a hardware malfunction and had to be replaced altogether. I just got my new hard drive, and after fit, he tried to install vista Home premium 32B, that came with my dell inspiron 530 computer. About 10 minutes after the installation a message announcing that "windows could not update the registry data" and "installation has been cancelled. This was repeated several times. Any ideas why and how to solve?
  Thank you.

  HI -.
  Other people who have had this problem report that choose NOT to do the updates during installation allows you to install finish. They are then installing updates once the installation is complete. You see an option to install no updatesa as part of the installation? Barb winter
  Program Manager of Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Line update does not update in the data of table view

  Hello
  
  I have Developer SQL 3.0.04 running on Windows XP.
  
  In the view of the table (Data tab) of the SENSOR table, after update of a line, I do not see the change. It's always the old value that is displayed. I managed to see if the table has been updated and it has been on sqlplus. After 'engage', I could see the same thing.
  
  The update statement has been:
  
  UPDATE safege.sensor SET lastacq = (select max (raw_date) of safege.msr_3566) where cmt = "W090QR01M002."
  
  And I got the answer "1 line Update". But when I look at I can't see the changes, still the old value.
  
  I tried to select
  Select lastacq from the probe where cmt = "W090QR01M003."
  and I could see that the change was made
  
  It was only after the closing of the view table and reopening, I could see the change presented in this table.
  
  It is a big problem for me because if I can't trust what I see under Developer slq, then I doubt on what I'm doing, if I'm really updating the table or what.
  
  
  Thank your for your entry.
  
  Christian

  I've seen a few bugs with 3.0.x, but I'm not sure you hit a bug. I have woked with 3.1 and 2.x versions and I didn't see this problem.
  Try to use the 3.1.x or 2.x version, I hope it is and must solve the problem.

  Kind regards
  http://www.oracleracexpert.com
  RMAN Oracle 11 g new features
  http://www.oracleracexpert.com/2011/12/Oracle-recovery-managerrman-new.html

• Last logged Date and Points not updated profile

  Under my profile, last logged Date means 24 October 2008 08:29, yet I was connecting on a one or two times a day!

  I also answer a certain number of discussions today and answering questions etc, yet my points have not updated in my profile?

  Does anyone else know this?

  Hi malala.

  There is a bug in the "last connected" - it appears a number of users (perhaps all) see the last logged date of Oct. 24 or 25 October 2008.  I asked my development team to investigate.

  Calculation of points is sometimes delayed for several hours - it is a normal feature.  Calculation of points is a relatively expensive operation, so improves the overall performance of site if we calculate points in real-time.  It is a change, we did at the beginning of 2008.

  Having to connect several times per day is a known bug.  In my view, there are two basic causes: we have a solution for those who will be released in February, and we are investigating the other.

  Best regards, Robert

  Robert Dell'Immagine, Director of VMware communities

• Calendar in dock not updated to the date of the day after El Capitan updated to v10.11.5

  El Capitan, updated in version 10.11.5 May 25, 2016, now the calendar in the dock is not updated to the current date, everyone had it?, how he was healed?

  See you soon

  Bill Edge

  What happens when you inspect system preferences > Date & time?

  • The correct time and Date displayed here?
  • Your time zone is correctly indicated?

• Incompatible data Configuration of Extension core will not update for 3.28.2 :(

  I try to use the fix for this problem If the Ethernet on your Mac stopped working recently - Apple supports

  I have a wifi connection so I took the first set of instructions. Unfortunately, the kernel Configuration data Extension Incompatible will not update and is still on version 3.28.1 according to the information system. I followed the steps several times and rebooted without modification. Ethernet connection still shows "Cable Disconnected" in system preferences.

  Help would be very appreciated

  Even if you have WiFi, have you tried the other option?

• IPhone 5 C Date and not updated

  Hi, after the last update IOS 9.2 I foud on this date and time are no longer works. Even I set automatic or manual configuration.

  Is this a bug? Is this a hardware problem?

  Please, I beg you. someone who can help me?

  Concerning

  Hey IP5c,

  Welcome to Apple Support communities.

  Information and troubleshooting in the article below should help you to solve the problem with the date and time, do not update correctly on your iPhone 5 c.

  Get help with the date and time on your iPhone, iPad and iPod touch - Apple Support

  See you soon.

• Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 will not update

  Today, I upgraded my Vista Ultimate Edition of Windows 7 Ultimate and checking the updates it listed 10 important updates. I went back in and there was still the major update 1 "Microsoft Office Access Runtime and Data Connectivity 2007 Service Pak 2 (SP2) who refuses to update which results in an error. I tried several times with the same error that results. Any suggestions as to why?

  The update could not update with no error code, just says 'update failed." However after that restart and check the view of the update the update again must have occurred because it is no longer returns in search of updates.  Thanks for responding to my problem

• My CB5-311 does not update its OS past v45. It's up-to-date. Stable channel is now 49.

  My CB5-311 does not update its OS past v45. I click updatae and he says that it is up-to-date. But the stable channel is now 49. Each type of chromebook only supports up to a certain version and Acer stops it going past?

  Systems will receive updates over the next few days.
  https://plus.Google.com/+MichaelSmith53/posts/ZWdbUq5ui3T

  So, probably, is still not available for your phone model, it will be good to ask to Google by the way.

• Windows will not update - "the location where updates WIndows stores the data changed.... »

  original title: windows will not update - please help

  I get the message "where Windows Update stores data has changed and should be repaired" How can I change this so that I can update my computer?

  How to reset the Windows Updates components?

  http://support.Microsoft.com/kb/971058>

  Download and Save the fix it 50202 from the page above.

  Close all the open browsers and programs prior to execution of the fix it.

  Since the downloads fail, when run you the fix it choose its default mode when you run it the first time.

  When he finished, check if download updates now.

  If the updates are still not download after you run it, then run it again and choose his Aggressive mode.

  Then reboot and see if the download updates now.

  UTC/GMT is 19:07 Monday, December 26, 2011

• Date field will not update

  Apex using pre-packaged "Group calendar" app I work on page 10. I updated the form to include a custom date field and added all the code to the EBA_ca_api package

  My problem is that my custom date field will not retain the value on the edition of an event. I have other custom fields that are not date fields (field numbers and text) that update without any problem...

  How can I update my date fields?

  Update:

  I am sure that the issue is somewhere in the package, the values are not updated for some reason any.

  The pre-existing app code uses this statement

  If to_char()c1.event_date_time,' DD-MON-RRRR HH:MIam ') ! = TO_CHAR ()p_event_date_time ' DD-MON-RRRR HH:MIam '( ) then

  Update EBA_ca_events

  set event_date_time = p_event_date_time

            where event_id = p_event_id ;

        end if ;

  
  

  and it works for this field when updating. I tried to use this code on my custom date field and it didn't work, so now I'm looking for something like this

  if TO_CHAR (nvl(c1.event_due_date,'0')) ! = TO_CHAR (nvl(p_event_due_date,'0')) then

  Update EBA_ca_events

  set event_due_date = p_event_due_date

             where event_id = p_event_id ;

  end if ;  -Copy the following code causes an error when you try to apply changes (not a month valid)

  
  

  Because the following code works and updates to my date no fields

  
  

  If nvl(c1.event_not1,'0')! = nvl(p_event_not1,'0') then

  Update EBA_ca_events

  Set event_not1 = p_event_not1

  where event_id = p_event_id;

  end if;

  Does the code work if I'm on the right track? -At the end of the day what I'm trying to do, it is to be able to add a date field for the application of group calendar pre-packaged on the creation form and event on page 10, and then later change this event and updated it to the database.

  
  

  Richie V wrote:

  No I did not, but do you know how to fix the error happen and allow the new field custom_date to be edited and saved in the database?

  Thereafter. The missing pieces of the puzzle were the type of the values concerned was TIMESTAMP WITH LOCAL TIMEZONE, and that type conversion had already been made in the process of page APEX. Therefore, the required code in the package:

  -- custom date code
  
  if nvl(to_char(c1.custom_date,'DD-MON-RRRR HH:MIam') , 'X')!= nvl(to_char(p_custom_date,'DD-MON-RRRR HH:MIam'), 'X')
  then
      update EBA_ca_events
      set custom_date = p_custom_date
      where event_id = p_event_id;
  end if;