BI Publisher fail to get the sample data

Similar Questions

• Failed to get the disk partition information when you add the new data store

  Hello

  Update my ESX to version 4 Update 1 (4.0.0, 256968). Now, I'm trying to add a new data store to a cluster in vCenter and receive the following error message when I will review the current structure of the disc "error when configuring the host: failed to get the disk partition information. When I click back, then next, there's no error message but in the formatting window, I get the error "Object reference" not set to an instance of an object.

  I see this question has been asked before, but I can't seem to find an appropriate response. Anyone? The interface using CLI instead of vCenter isn't an option (alignment VMFS, workload and so on)

  I use Dell R900 with an EMC Symmetrix VMax SAN

  The size of the LUN I want to add is 741 GB

  Concerning

  Marius Aulie

  If you have a virtual machine for Windows test, you could do the following, to ensure that the logic unit number has a clean partition table:

  -set the LUN as a GROSS physical to virtual machine device

  -Run diskpart, select the drive and run the CLEAN command

  -detach the LUN to the virtual machine

  -try to create the data on the LUN VMFS store

  The size of the block of the data store where the VM test can be a problem with the above. Due to the size of the LUN, the size of the block of the data store must be at least 4 MB. Attach the LUN to a physical test system could be an alternative.

  André

• Get the latest data of Variable shared before disconnecting from the network

  Hello.

  I use Shared - published network variables for my communication between two PC's. Each LV software will pass the data to another.

  Sometimes the wireless connection to become really bad and the network connection stops.

  I want to get the latest data. Currently my VI will show the value '0' on the variable shared data once the connection is cut.

  I tried using shift, but she registers the same results.

  Can someone show me how I can stay past data when the network connection is disconnected.

  Thank you very much.

  Kind regards

  Hello Fan, Ravens

  It works! Thank you very much.

  Kind regards

• Can't mount NFS share - operation failed, diagnostics report: failed to get the path console for volume

  I'm trying to mount a NFS on ESXI 6 volume, but continue to operate in the error.  Googling everything nothing helped, so I'm here. Error:

  Call "HostDatastoreSystem.CreateNasDatastore" of object "ha-datastoresystem" on ESXi '192.168.xx.xx' failed.

  Operation failed, the diagnostic report: failed to get the path of the console for the volume, the name of the sample.

  The NFS share is located on a synology nas. I checked the permissions and configuration. Everything seems correct based on the various boards and KB articles.

  Ideas?

  Thank you.

  Find the esx.conf file in/etc/vmware.

  If you could also share a copy with me...

  Try to mount the NFS VMware KB: Volume fails with the error: could not resolve the host name

  Check the link as well below.

  http://www.Bussink.ch/?p=1640

• Failed to get the status of printer/bizhub Konica Minolta C654e

  Failed to get the status of printer/bizhub Konica Minolta C654e

  Cannot print from my Mac.

  With the limited information you supplied I would check the configuration of the print queue. If you open information system (located under Applications > utilities), you will see a column on the left and if you select printers the right pane displays the print queue information. Note If you have multiple printers, you can select in the right upper pane to view its information in the bottom right pane. Can you copy this information and paste it here.

• Get the raw data to map its (SDK)

  I did a search on sound cards and many forums have been useful.  I have just a few quick questions.

  I have a card his (CardDeluxe http://www.digitalaudio.com/) connected to the computer through a PCI.  My goal is to get the raw data from the card and plug and it blow in analytics in CVI.  I don't know how to "talk" to my sound card.

  Of course, my main question is above, but to the refine some concerns...

  I guess I need the SDK libraries for that.  For this, I just need to install the MSN help libraries?

  Is this possible in the Basic Version, or if the full Package of CVI is necessary?

  I have not done things well at low altitude, but it looks like getting a wav file is necessary.  I can't use anything outside of the applications I want to eventually create a program automatically record and play at a time (sync) précis.

  Thanks in advance.

  This site is what I was looking for.  The zip file contains an exe as file c source code.

  http://paulhoule.com/phsrec/index.php

  Edit:

  There is also some info here - http://forums.ni.com/t5/LabWindows-CVI/wav/m-p/235344

• problem to get the current date in qml

  Hello world

  I'm trying to get the current date in c ++ and qml and I used the class QDate, but it still has some problems:

  Code:

  =====================================================

  QDate * nowdate = new QDate;
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (nowdate-> currentDate()));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  ===========================================================

  After setting the nowdateMap, I'm able to get the date in the application, but the format is really weird, I did not use QDatetime, but the restult of shows like ' 2013-1 - 3 T 00: 00:00 ", how can I get rid of the final"T00:00:00 "? or is there a better way to get the current date?

  Thank you

  QDate nowdate is QDate::currentDate();.

  QString nowdatestring = nowdate.toString (); / / to get the date string format, you can define the shape of toString(), you can //search it
  QDeclarativePropertyMap * nowdateMap = new QDeclarativePropertyMap;
  nowdateMap-> insert ("date", QVariant (QString (nowdatestring)));
  QML-> setContextProperty ("nowdateMap", nowdateMap);

  then in the file qml, using nowdateMap.date will do.

• How to get the last date of 3 days for the current month?

  Hello. Guy

  How to get the last date of 3 days for the current month?

  MY OUTPUT WOULD LOOK LIKE THIS

  JANUARY 29, 2016

  JANUARY 30, 2016

  JANUARY 31, 2016

  
  

  GUYS HELP ME / / /...
  

  SQL > select last_day (sysdate) - level + 1 double connect by level<= 3="" order="" by="">

  LAST_DAY)

  ---------

  29 JANUARY 16

  30 JANUARY 16

  31 JANUARY 16

• How to add two lines when the second row is not visible, but also gets the first data line too?

  Mr President

  Jdev worm is 12.2.1

  How to add two lines when the second row is not visible, but also gets the first data line too?

  I want to add two lines like below picture, but want the second to remain invisible.

  

  I asked this question but my way of asking was wrong, that's why for me once again.

  Concerning

  Try to follow these steps:

  1. in the database table to add the new column "JOIN_COLUMN" and add the new sequence "JOIN_SEQ".

  2. Add this new column in the entity object. (You can add this in entity object by right clicking on the entity object and then select "Synchronize with database" then the new column and press on sync)

  3. in your bookmark create button to create only one line NOT 2 rows.

  4 - Open the object entity--> java--> java class--> on the entity object class generate and Tick tick on the accessors and methods of data manipulation

  5 - Open the generated class to EntityImpl and go to the doDML method and write this code

    protected void doDML(int operation, TransactionEvent e)
    {
      if(operation == DML_INSERT)
      {
        SequenceImpl seq = new SequenceImpl("JOIN_SEQ", getDBTransaction());
        oracle.jbo.domain.Number seqValue = seq.getSequenceNumber();
        setJoinColumn(seqValue);
        insertSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      if(operation == DML_UPDATE)
      {
        updateSecondRowInDatabase(getAttribute1(), getAttribute2(), getAttribute3(), getJoinColumn());
      }
  
      super.doDML(operation, e);
    }
  

    private void insertSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "Insert into table_name (COLUMN_1,COLUMN_2,COLUMN_3,JOIN_COLUMN, HIDDEN_COLUMN) values ('" + value1 + "','" + value2 + "','" + value3 + "','" + joinColumn + "', 1)";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  
    private void updateSecondRowInDatabase(Object value1, Object value2, Object value3, Object joinColumn)
    {
      PreparedStatement stat = null;
      try
      {
        String sql = "update table_name set column_1='" + value1 + "', column_2='" + value2 + "', column_3='" + value3 + "' where JOIN_COLUMN='" + joinColumn + "'";
        stat = getDBTransaction().createPreparedStatement(sql, 1);
        stat.executeUpdate();
      }
      catch (Exception e)
      {
        e.printStackTrace();
      }
      finally
      {
        try
        {
          stat.close();
        }
        catch (Exception e)
        {
          e.printStackTrace();
        }
      }
    }
  

• com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  I use D:\MessageQueue4_5\mq\bin\imqcmd.exe to get heads of JMS queues. In most of the facilities, I can retrieve the results without problem.

  At a single facility, however, I get an error when you try to run this command. Called with no arguments, it should display a list of available commands. But that's what I get instead:

  D:\utilities\imqChk > d:\MessageQueue4_5\mq\bin\imqcmd.exe

  Boot process failed.

  Could not run

  Java

  -cp

  d:\MessageQueue4_5\mq\lib\imqadmin.jar;

  d:\MessageQueue4_5\mq\lib\fscontext.jar

  -Dimq.home=d:\MessageQueue4_5\mq

  -Dimq.etchome=d:\MessageQueue4_5\mq\... \etc\mq

  com.sun.messaging.jmq.admin.apps.broker.BrokerCmd failed to get the exit code of the child.

  Other info:

  • Java is installed (version 1.7.0_17).
  • QBrowser using, I can sign in successfully and retrieve information from queue.
  • All of the named files and jar files are where they are supposed to be within the meaning of the doce above.

  I was not able to locate the source of the problem. Any ideas would be greatly appreciated.

  Thank you.

  I had this same problem and solved by editing the file \glassfish3\mq\etc\imqenv.conf manually by setting IMQ_DEFAULT_JAVAHOME as follows:

  IMQ_DEFAULT_JAVAHOME = / Files/Java/jdk1.7.0_45 program

  Note the orientation of the slash. It's on Windows, and when I used with Windows style slash escape sequence, it does not solve this problem only when I used the mangled Unix style done.

  Hope this helps,

  -Noah

• I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows?

  I tried to download a pdf and convert them into excel, but the data in excellent is always to the image format.  How can I get the pdf data into the columns and rows so that I can do the calculations?

  If you start the https://forums.adobe.com/welcome Forums Index

  You will be able to select a forum for the specific Adobe products you use

  Click on the symbol "arrow down" on the right (where it is said to see all our products and Services) to open the drop-down list and scroll

• How to get the current date to display in the Spanish format.

  The coding is in format Adobe Acrobat, DC. The coding I have for the English today's date is:

  var d = new Date();

  sDate = util.printd var ("dd mmmm yyyy", d);

  this.getField("Text1").value = sDate;

  How can I get the current date displayed in this Spanish format: 07 December 2015

  Thank you

  It's a little complicated... But this code should do the trick:

  util.printd("dd", d) + " de " + util.printd("date(es){MMMM}", d, true) + " de " + util.printd("yyyy", d);
  

  Edit: Fixed the code... Did not notice the 'of' second before.

• How to get the old data 6 months from the current date?

  Hi friends,
  
  I have a table which includes historical data, which are having more than 1 years old data. The historical table gets updated once a week. My requirement is that I should get the latest data from the week of each month for 6 months according to the current data. I use oracle 10g.
  
  Can you please someone help in this.
  
  Thanks in advance

  SELECT last_day (ADD_MONTHS (TRUNC (SYSDATE, 'mm'),-LEVEL))-7 start_dt.
  LAST_DAY (ADD_MONTHS (TRUNC (SYSDATE, 'mm'),-LEVEL)) end_dt
  OF THE DOUBLE
  CONNECT BY LEVEL<=>

  change as a result, I have provided you the start and end dates for your logic...

• Error: ORA-16757: failed to get the value of this property

  Hi all
  I have an error:
  DGMGRL > see the database dbname_stb LogXptStatus;
  Error: ORA-16757: failed to get the value of this property
  I check:
  DGMGRL > see the configuration;
  
  Configuration - dbname_dg
  
  Protection mode: MaxPerformance
  Databases:
  dbname_pr - primary database
  dbname_stb - physical of the standby database
  
  Fast-Start Failover: DISABLED
  
  The configuration status:
  SUCCESS
  
  drcdbname_stb.log:
  RSM0: Received the request the property Get: rid = 0 x 01010000, pid = 54
  2012-10-17 15:21:14.702 of database Resource: get the LogXptStatus property
  RSM 15:21:14.702 2012-10-17 error: trying to interview a 'LogXptStatus' primary type property on a standby database resource.
  2012 10-17 error 15:21:14.702 database resource GetProperty (16501,16757)
  
  I don't understand this error?
  Thank you all.

  Take a look on this

  Re: ORA-00254 | Trouble with dataguard

• Error "could not get the audio data in the file.

  Hello

  I get a lot of mistakes "Could not get the audio data in the file" when you open a project. Sometimes they will plant Premiere Pro CC 7.01 (Mac). But if no first works as usual, with the audio.

  I tried to convert the audio files (from the hearing) from 32 to 16 bit. It worked while opening a project once, but not the next time.

  Where can it be?

  Edit: I also get this error when importing audio: "error: Premiere Pro version 7.0 is not compatible with the first version of plugin Pro 5.7.4. Maybe it's related.

  I have it! This is the plugin Smartsound hurt. Got rid of him and no more errors.