Big problem with transparent export

Similar Questions

• Big problem with voice XT1068

  Hello! Sorry for my English not good!

  In my XT1068, I have a big problem with the voice: I set up the volume to hear (after call to answer etc.) other different Max-> always I hear MAX Volume headset (no helmet)! Next-> low volume - but next call... MAX AGAIN!

  Please help me!

  5 Android, XT1068, Dual Sim, of Poland but the phone is purchased in detail of the Germany.

  Try safe mode - if this solves the problem, then it's probably an app you have installed.

• Big problem with Windows XP, IE8

  I have a big problem with windows xp. Many things do not work as they had passed him. For example the personal setting are not recalled from session to session. IE 8 does not funtion properly (icons on the desktop are re-arraged, toolbars cannot be deleted or I'm unable to load pages from the internet). Programs do not work, the files will not open. When I look at my hard C disk folders and files are hidden.

  Recently, IE has been upgraded to IE8 and I installed Norton 360 but I don't mean that they caused the problem. However, whenever the Norton scan executes a "error 8 506 421" stands up and says me that I have to uninstall and re install Norton.» But I lost the ADMIN privileges so I am not able to uninstall or go back to a restore point.

  I can't go in safe mode. Pressing F8 takes me to the quick screen C not the windows safe mode screen. I can't go in safe BOOT mode. INI or the other.

  If I switch to another user, everything seems fine but I don't have ADMIN privileges with this user to be able to make changes.

  Is this a problem with norton? IE8? A virus?

  Any thoughts will be greatly appreciated.

  Thanks in advance,

  Lost without a computer

  It sounds like you have a corrupted for your user to administrator user profile.

  You may be able to recover using System Restore to restore to a point in time before your problem.  Based on the F8 key, you bring in a command prompt window, try to start restoring the system to the command prompt by using the following procedure:

  "How to start the System Restore tool by using the option of safe mode with prompt theCommand in Windows XP"

  <>https://support.Microsoft.com/kb/304449/en-us >

  If this does not work, you can still be able to recover by performing a check disk to your command prompt window operation (after that you press the F8 key).  Enter the following command:

  CHKDSK c: /R

  If you are in the Recovery Console, it can simply begin, or you may need to restart before it will start.  Corrupt profiles are most often caused by the Corruption of system files, so a chkdsk operation should be performed little matter how you end up recovery.  Note that this can take a few hours to run.

  "How to perform disk error in Windows XP check"

  <>http://support.Microsoft.com/kb/315265/en-us >

  HTH,

  JW

• My dear friends, I have Acer s2oo smart phone. I have a big problem with it

  My dear friens, I have an Acer s 200 smartphone. I used it for many years. but now I have a big problem with it. Dears when I turn it on it is the acer logo appears on the screen, but then it keeps this process. I mean after 5 or 6 hours, when I look at my phone always logo Asher on the screen never turn off or work. then I have it connected to my computer in order to re program the windows installation, but my computer does not connect to it. My dear please help me

  How can I get it back. What kind of program will help connect my computer. If such a program exists please could you give me the link of it for download. Please help me. Take care.

  Wow this is a very old smartphone

  I suggest you take a look at this forum to find some tools useful/rom:

  http://Forum.xda-developers.com/Acer-F1

  Here you can find some ROMs to use to try to repair your S200:

  FTP://FTP.Acer-euro.com/Smartphone/S200/os_images/

• I have a big problem with Windows Live essentials 2011. 0x8007064c error code

  I have a big problem with Windows Live essentials 2011.  I can't find in Add and remove programs or in C:\program files to remove it if I can reinstall it.  I went through the registry and deleted all instances of it.  When I try to reinstall, I get the error 0x8007064c code.  I've done everything I can find to do, but to no avail.  Help, please...

  Hello

  bad forums

  Repost in windows live forums

  http://windowslivehelp.com/

• BlackBerry Q5 big problem with BB Q5 data - IP ADDRESS REJECTED. :( :(

  Hi all!! I have a blackberry Q5, the version of the 10.2.1.2102 software... It is the best blackberry smartphone I've ever had! but since one week, I have a very big problem with my BB Q5: if I want to surf the internet, with data from my phone (not in WIFI mode but with the data of the phone (4G, 3 g +)), I can not go on any website, but the only thing I watch is a white screen with this message "ERROR HTTP 403.6 ": the IP address of the client has been rejected"...! What can I do? I'm really desperate! I called my provider (SFR), they told me that my connection is ok, I'm not a problem with them, and this is my phone... HELP ME PLEASE!  

  Hello!!! Just to say that finally, after several attempts, I have solved my problem: there was a problem with my service provider SFR with my phone! I regret bringing this up on the forum, but when you call the customer service you think they know their work... but fortunately for us if we have the blackberry is because we are not so ignorant on the connections, network and telephone line! : D have a nice day blackberry users!   

• Problems with the export of

  Hello

  I had problems with the export feature in Photoshop 2015 CC. I think that the problems started some time around the most recent update, but it is possible it all started when I used the photo frame Script (filter > render > photo frame). I'm not sure. But as you'll see below, it is almost that the software attempts to create a setting when I try to export an image.

  In any case, when I try to use the export function, the image that appears in the dialog box is stretched and distorted.

  

  I can resize the box and the image will then appear normal, but then when I click on "Export all", the screen looks like this:

  

  The box save never actually appears. It's just a white box with a black column. It's almost as if the screen is not complete the drawing.

  And it seems that this problem starts even before I got to export in the form box. The beginning of Photoshop screen looks like this:

  

  The file names (which I have gray here) are not complete. They end up just with a white line that reaches out to the right of the screen.

  This has happened for at least a few weeks now. Stop smoking out and restarting does not help. I tried to reset my preferences and that did not help. I tried to delete the preferences file and it still happens.

  BTW, the Save for Web feature works very well.

  I work on a Mac with the following attributes:

  

  My Mac software is up to date, as well as Photoshop.

  Can someone help me understand what is happening and how to fix it?

  Thank you-

  Mary

  If you see a picture frame in the preview, but not in the exported file, I think that you have driver video card problems.

  If you go into Photoshop preferences > Performance and uncheck 'Use Graphics Processor', the problem goes away?

• Big problem with photoshop!

  Big problem with photoshop! 6 days ago, I expired trial version of photoshop for a month, four days ago, I purchased a monthly subscription only for photoshop, after trying the steps written on the adobe page, yet I can't use photoshop because it says "trial has expired" when I try to click on buy says 'already purchased package' but the problem is that even after having uninstalled and reinstalled all adobe problem reports. talk about the Mac in Photoshop version. Being the center of Italian service does not even exist in my language... Sorry for my bad English, I hope someone can help me!

  According to the information of your account you have not activated your Computer.Looks as something must be considerate activation.

  See Solutions to connect, activation and errors in connection with creative cloud and Creative Suite applications and follow the steps. /

  ~ Assani

• Big problem with the D810 images

  I have a big problem with lightroom. He presents objects in images to avoid. An example is the following:

  

  The same image converted with Nikon ViewNX 2, does to 16 bit TIF and reimported into Lightroom is much better:

  

  Is there something I can do? Is there a problem with my settings? Is this a known on the side of lightroom problem? Will there be improvements corrections? This may be due to active d-lightning without knowing about this in lightroom?

  Thanks for any help and suggestions!

  There is a problem of Posterization with the camera matching profiles having Lightroom for the D810. This could well be her. As I know there is no update for those yet. Try a different camera such as Adobe Standard profile. If this resolves the Posterization that this question and you will have to wait for the next update of Lightroom to get updated profiles to update (I hope).

  > This can be caused by active d-lightning without knowing about this in lightroom?

  No, but it is advisable not to use all modes like this in camera when you use Lightroom or any other software gross non-Nikon because all that camera RAW isn't to underexpose it and save a statement to apply treatment HDR with Nikon raw software. Other software will not be able to read as the statement and it will make images appear underexposed because they are in reality.

• Adobe Muse - big problems with SEO/metadata?

  Hello

  I just finished mysite using muse adobe but I have big problems with the metadata tool, basically, it does not work.

  I can't find my site anywhere on google except if I type in the domain itself, despite the fact that I inserted a full description and several key words.  When it seems that the description is not what it is supposed to be. Rather than taking the actual description, it must be just a paragraph of my site.

  Metadata Adobe Muse option actually works? Anyone who has used with success. Seems to be a major flaw in the product Adobe Muse.

  While Muse inserts metadata into your page correctly, search engines do rely not 100% on this subject. You can add semantic properties to your pages by creating paragraph styles, applying, and then choosing the tag type in the paragraph style options. You can add h1, h2 and so on, for example.

• Problem with the export format MXF OP 1A in after effects 2015

  I have a big problem, when I tried to export format MXF OP1a with XDCAMHA 50 PAL (4:2:2), that export us in our TV.

  I have a project of screening HDTV 1080 25, photo belowe setting parameters:

  

  But when I used to export format MXF OP1a (XDCAMHD 50 PAL (4:2:2)), came first this:

  

  WTF!

  When I clicked OK, problems biggin:

  

  Output modul said "Incompatibility of parameters", and when I click on yellow triangle warning arrive (photo at the top).

  WTF!

  I missed something. I did something wrong?

  Need help.

  This codec, XDCAM 50 PAL is a non square HD codec and the size of the image is defined by the codec. If you choose XDCAM EX you can get the square pixels, but you have a flow lower and 4:2:0 color. This is a limitation of the format XCCAM that you're stuck with.

  You can choose another format option. Most of them have predefined sizes. It just depends on what you're trying to deliver and to WHO. If it's for the broadcasters all have their own set of standards that should be followed.

• Problem with printer, exported to PDF

  Hello, I have a problem with my printer to work. I recently installed acrobat from adobe pro xi. And from a pc, we can use option of the printer to export PDFs, but on the other, we cannot. It reports a problem in the system. So I uninstalled the program and reinstalled after a while but the same problem bulging guard.

  It says this:

  

  I don't understand what is the exact problem because the installation was made in the same way to this computer than for others and that they do not appear this problem.

  What you think is the source of this problem and what can I do to fix this?

  Thank you very much for taking the time to read this also.

  Nevermind guys, I understand it. For all of you who have the same problem, the solution is:

  1 open my computer and navigate to: C:\Windows\system32\config\systemprofile (per-folder if it is easier for you) and check if there is the Desktop folder.

  2. If there is no such thing as the Desktop folder, and then create a new folder and rename it to desktop or copy it from C:\users\Default\Desktoplocation.

  Note: C:\Users\Default is hidden by default

  Hope that helped :D

• problem with audio export blocked at 8000 hz since AE CC 12.2.0.52

  Hello

  Today, it's a mess, I don't know if it's my iMac is dying or what, but several problems.

  I try to export a model, he has worked and today, the frequency of the audio in the render parameter is blocked at 8000Hz, when I try to use another frequency and confirm, the frequency is back to 8000Hz! I try with other audio files, but it's the same problem...

  solution?

  Here are the details of the update fixes after effects CC (12.2.1), which is now available:

  http://Adobe.LY/AE_CC_1221

  This update fixes the bug of audio sampling, as well as several other issues.

  Note the part at the end of this page on a crucial update for the creative cloud desktop application, which addresses serious problems with the SOUL, first Pro and After Effects.

• Major problem with transparency using Flash Player 11 on IE 9 with Intel HD graphics card

  There are some problems with Flash Player 11,0,1,152 with Intel HD graphics card when using Internet Explorer 9 with hardware acceleration enabled.

  Transparencies are not working!

  They appear just like the black areas on the page when wmode = "transparent".

  See my bug for details, test URL and screenshots.

  I logged a bug:

  https://bugs.Adobe.com/jira/browse/ASC-4370

  I've also seen a few similar posts:

  http://forums.Adobe.com/message/3992938

  http://forums.Adobe.com/message/3992736

  http://forums.Adobe.com/message/3992735

  To work around this problem, you can disable hardware acceleration in the settings of IE9 to prevent this, but performance is terrible and this is not a solution.

  Can someone from Adobe please tell me when this is likely to be resolved - this is a pretty catestrophic bug!

  Everyone knows this?

  Thank you

  Luke

  Transparency bug has been fixed in 11.1.102.55 to today release so please check if your problem still exists or resolved. It is useful if you update result on above bugs.

• Final movie is too big/problem with compression

  Hi everyone :)

  I have a little problem with the film I work with, I know this question may seem silly, but I'm not an expert in the making of films...

  I started with a hd video import (file size: 160 MB) to my Premiere Pro CS3.

  I worked with her a little, nothing fancy just a few added effects.

  So when I tried to export it, I get like 560 mb file. It's too much, because I am interested in getting into the 40, 50 MB or even less.

  I tried some different compressors, once again, I'm in 3, 4 GB (lol) but never less than 500 MB...

  Here are the settings that are available and give me a 500 MB file:

  
  file type: microsoft dv avi
  compressor: DV PAL
  frame rate: 25 fps
  format of the pixels: PAL D1/DV widescreen 16:9 (1.422)
  -Compress: maintain the data rate

  Could someone help me with my problem?

  See you soon

  Joachim

  He works in CS3, Harm.

  Quite honestly, Joachinm, Premiere Pro can be too much for this work.  Try a Publisher consumer who will directly manage your camera media.