Similar Questions

• How to avoid mistakes in 2015 CC of rounding

  Since the Illustrator CC 2015 update I see a lot of very unpleasant rounding errors when working with vectors in Illustrator.

  For example: I paint a perfectly horizontal line, I'll reproduce them towards the low once or twice using Cmd + D I even make sure they are all directly below the other by selecting all and Kaleidoscope in a left/right edges of the selection.

  Then I select the lines and rotate degrees the entire block 90 or - 90 by holding SHIFT when rotating slide. The version of rotation of lines end up not having their departure and arrived on the same horizontal line, some of them are higher. To make things worse, when to take the Group of lines and turning to 0 degrees than the error persist, they are not directly under each other more.

  It is an example of rounding errors that I have experience in Illustrator CC 2015. The problem also does not disappear during the passage of the GPU overview overview of the CPU mode, unlike other problems that are related only to the way things are displayed. The problem is purely mathematical which affects the actual position of the points.

  Is there a way I can improve the precision of Illustrator CC 2015 to match CC 2014 so something like this won't happen?

  Peter,

  As Monika says you can actually be haunted by aligning it to the ghost of the pixel grid as I thought in the first post, which also holds the complete instructions how to sort.

  But not if the position changes are also great that you said, 8 points. That's why the post #3 down.

  If the interpretation of the screen/image in your post #7 capture depends on the level of scale/zoom.

• Of the rounded corners table!

  Is there anyone who knows when adobe finally arrives with such a possibility?

  At least adding blocks of text autoexpanding CS6 has made workarounds not as ugly.

  Create an image, apply effects of rounding, auto expand width and height to the frame, insert a table without table border to apply STROKE to framework for table - if desired border, graphics fixed calendar feast and copy - paste in place of the text flow. This method allows you to apply shadows, bevel effects, etc.

• Error java.lang.ArithmeticException: required rounding

  Hi all.
  
  I got the error "java.lang.ArithmeticException: required rounding ' in the following line
  
  String DividendAmountStr = String.valueOf (new BigDecimal (DividendAmount) .setScale (2));
  
  What should be the problem?
  
  -Barros

  It is possible was not so perdantic Java 1.3. Also, it is easy to write some prgrams with bugs that just happened to work the way they are used. Do things a little differently reveals the bug.

  The problem is the use of new BigDecimal (double). This gives a faithful reproduction of the double value underlying. Many methods that convert double to another type allow a small rounding in double error, this constructor is not.

  Even a simple value like 0.1 has a small mistake of rounding of type double. Normally, it is not clear, with BigDecimal is.

  double d = 0.1;
  System.out.println("d= " + Double.toString(d));
  BigDecimal bd = new BigDecimal(d);
  System.out.println("bd= " + bd);
  BigDecimal bd2 = BigDecimal.valueOf(d);
  System.out.println("bd2= " + bd2);
  

  prints

  d= 0.1
  bd= 0.1000000000000000055511151231257827021181583404541015625
  bd2= 0.1
  

  As you can see the second method for the conversion of a double is not this round question for this value. This could be a temporary option and it might work most of the time, but use setScale() with a rounded option will work every time.

• Rounded corners are not displayed

  Hello

  I used some rounded corners for the site that I created in the trial version.

  Rounded corners worked very well, but all of a sudden appear in the preview mode or the browser more. He arrives just after I tested the anchor links in a page and pinned the object in this page and the master page. I'm not sure that this could be linked to the problem at all...

  Could you help me fix this bug?

  Thanks in adance,

  Kind regards

  Sandrine

  Hello

  Please check this similar discussion,

  Overview Errors_New Version Bugs?

  - http://forums.adobe.com/message/4417828

  I see that there is a work around provided by one of the Member of the community for the product.

  Kind regards

  Abhishek Maurya

• AppleScript: Options of rounding (am I crazy or I found a bug?)

  I update an AppleScript script that rounds the corners of the elements on the page of the CS4 CS5 versions, now, I understand that you need to say to all the corners of a rectangle, what to do now in CS5, but what I don't understand is the fact that AppleScript don't compile the statement: the value of the option at the bottom right at the corners rounded.

  I can't work if it is a massive FAILURE on my name or a bug. The code I have is:

  Set myDoc to the active document

  say myDoc

  myRectangle make rectangle with properties the value {geometric limits: {50, 50, 150, 150}, fill color: "Black"}

  say myRectangle

  Set the top left rounded corner option

  the value of the radius of the top left corner 5

  Set the upper right corner to the rounded corner option

  the value of the radius of the top right corner 5

  set the lower left corner rounded corner option

  the value of the radius of the bottom left corner 5

  -the value of the option at the bottom right at corners rounded

  the value of the radius of the bottom right corner 5

  tell the end

  tell the end

  The script works fine if I comment on "set the option in the lower right corners rounded" but when I activate the script statement fails.

  Please see if it works for you, and if not, I guess I need to file a bug report.

  Thanks in advance

  Dylan

  Certainly a bug Dylan!

  You can compile if you use the syntax of Chevron and it arrives with a double space between the bottom and right.

  the value le 'property pcO4' to the rounded corner

  Compiles to

  the value the option to angle straight down to corner rounded

• Timesheet to round up to the quarter of an hour

  I have this timesheet that has four 'In' and 'Out' 4.e and calculates hours worked in a pay period in two weeks. There is a column on the right that calculates the hours of work for the day (see text below). I need to round to a quarter of an hour, i.e.,.

  If an employee arrives or leaves between:

  ": 00"to": 07" minutes after the hour, calculated from the end of the hour. "

  ': 08 'to': 22 "minutes after the hour, calculate the quarter past the hour.

  ': 23 'to': 37 "minutes after the hour, calculated from the half hour.

  ": 38 'to': 52" minutes after the hour, calculate three quarters after the hour.

  ": 53 'to': 60" minutes after the hour, calculated from the end of the hour. "

  
  Examples:

  Calculate an employee records that they arrived at 08:07 from 08:00

  Calculate an employee records that they arrived at 08:08 from 08:15

  Calculate an employee records that they arrived at 08:22 from 08:30

  Calculate an employee records that they arrived at 08:37 from 08:45

  Calculate an employee records that they arrived at 08:53 from 09:00

  Script in the column "hours worked".

  
  calculate block 0
  var StartInterval = 0
  If (HasValue(OUTA1[0]) and HasValue(INA1[0])) then
  StartInterval = Time2Num (OUTA1 [0] .formattedValue, "HH: mm")-Time2Num (INA1 .formattedValue [0], "HH: mm")
  endif

  
  calculate block 1
  var LunchInterval = 0
  If (HasValue(OUTA1[1]) and HasValue(INA1[1])) then
  LunchInterval = Time2Num (OUTA1 .formattedValue [1], "HH: mm")-Time2Num (INA1 .formattedValue [1], "HH: mm")
  endif

  
  calculate block 2
  var EndInterval = 0
  If (HasValue(OUTA1[2]) and HasValue(INA1[2])) then
  EndInterval = Time2Num (OUTA1 .formattedValue [2], "HH: mm")-Time2Num (INA1 .formattedValue [2], "HH: mm")
  endif

  
  calculate the total time in hours from the value in milliseconds
  Round (sum (StartInterval, LunchInterval, EndInterval) / 3600000,2)

  I know that in excel I can use = (ROUND(B2*96, 0)/96)-(ROUND(A2*96, 0)/96) to get the results I want. So I tried to get into something similar in FormCalc script but without success. If you could tell me what I need to do to make this work, I would be very grateful. Thank you, Derrick

  Even better for the other possible problems...

  var timeStamp
  var timeout
  timeIn var
  var Cat
  var timep1
  var timep2
  var timep3
  var timep4

  var StartInterval

  If (HasValue ($.parent.)) OUTA1 [0]) and HasValue ($.parent.) INA1 [0])) then
  timeStamp = $.parent. OUTA1 .formattedValue [0]
  Cat = At(timeStamp,":")
  timep1 = (timestamp, Cat-1) Left
  timep2 = Right (timeStamp, len (timeStamp) - Cat)

  timeStamp = $.parent. INA1 .formattedValue [0]
  Cat = At(timeStamp,":")
  timep3 = (timestamp, Cat-1) Left
  timep4 = Right (timeStamp, len (timeStamp) - Cat)

  If (Ceil (timep1)< ceil(timep3))="">
  timep1 = timep1 + 12
  If (timep1<= 9)="">
  timep1 = Concat ("0", timep1)
  xfa.host.messageBox (timep1)
  endif
  endif

  If (Ceil (timep2) > = 0 and Ceil (timep2))<= 7)="">
  timeOut = Concat (timep1, ":", "00")
  endif
  If (Ceil (timep2) > = 8 and Ceil (timep2))<= 22)="">
  timeOut = Concat (timep1, ":", "15")
  endif
  If (Ceil (timep2) > = 23 and Ceil (timep2))<= 37)="">
  timeOut = Concat (timep1, ":", "30")
  endif
  If (Ceil (timep2) > = 38 and Ceil (timep2))<= 52)="">
  timeOut = Concat (timep1, ":", "45")
  endif
  If (Ceil (timep2) > = 53 and Ceil (timep2))<= 59)="">
  timep1 = timep1 + 1
  If (timep1<= 9)="">
  timep1 = Concat ("0", timep1)
  xfa.host.messageBox (timep1)
  endif
  timeOut = Concat (timep1, ":", "00")
  endif

  If (Ceil (timep4) > = 0 and Ceil (timep4))<= 7)="">
  timeIn = Concat (timep3, ":", "00")
  endif
  If (Ceil (timep4) > = 8 and Ceil (timep4))<= 22)="">
  timeIn = Concat (timep3, ":", "15")
  endif
  If (Ceil (timep4) > = 23 and Ceil (timep4))<= 37)="">
  timeIn = Concat (timep3, ":", "30")
  endif
  If (Ceil (timep4) > = 38 and Ceil (timep4))<= 52)="">
  timeIn = Concat (timep3, ":", "45")
  endif
  If (Ceil (timep4) > = 53 and Ceil (timep4))<= 59)="">
  timep3 = timep3 + 1
  If (timep3<= 9)="">
  timep3 = Concat ("0", timep3)
  xfa.host.messageBox (timep1)
  endif
  timeIn = Concat (timep3, ":", "00")
  endif

  StartInterval = Time2Num (timeout, "HH: mm")-Time2Num (timeIn, "HH: mm")
  on the other
  StartInterval = 0
  endif

  var LunchInterval

  If (HasValue ($.parent.)) OUTA1 [1]) and HasValue ($.parent.) INA1 [1])) then
  timeStamp = $.parent. OUTA1 [1] .formattedValue
  Cat = At(timeStamp,":")
  timep1 = (timestamp, Cat-1) Left
  timep2 = Right (timeStamp, len (timeStamp) - Cat)

  timeStamp = $.parent. INA1 [1] .formattedValue
  Cat = At(timeStamp,":")
  timep3 = (timestamp, Cat-1) Left
  timep4 = Right (timeStamp, len (timeStamp) - Cat)

  If (Ceil (timep1)< ceil(timep3))="">
  timep1 = timep1 + 12
  endif

  If (Ceil (timep2) > = 0 and Ceil (timep2))<= 7)="">
  timeOut = Concat (timep1, ":", "00")
  endif
  If (Ceil (timep2) > = 8 and Ceil (timep2))<= 22)="">
  timeOut = Concat (timep1, ":", "15")
  endif
  If (Ceil (timep2) > = 23 and Ceil (timep2))<= 37)="">
  timeOut = Concat (timep1, ":", "30")
  endif
  If (Ceil (timep2) > = 38 and Ceil (timep2))<= 52)="">
  timeOut = Concat (timep1, ":", "45")
  endif
  If (Ceil (timep2) > = 53 and Ceil (timep2))<= 59)="">
  timep1 = timep1 + 1
  If (timep1<= 9)="">
  timep1 = Concat ("0", timep1)
  xfa.host.messageBox (timep1)
  endif
  timeOut = Concat (timep1, ":", "00")
  endif

  If (Ceil (timep4) > = 0 and Ceil (timep4))<= 7)="">
  timeIn = Concat (timep3, ":", "00")
  endif
  If (Ceil (timep4) > = 8 and Ceil (timep4))<= 22)="">
  timeIn = Concat (timep3, ":", "15")
  endif
  If (Ceil (timep4) > = 23 and Ceil (timep4))<= 37)="">
  timeIn = Concat (timep3, ":", "30")
  endif
  If (Ceil (timep4) > = 38 and Ceil (timep4))<= 52)="">
  timeIn = Concat (timep3, ":", "45")
  endif
  If (Ceil (timep4) > = 53 and Ceil (timep4))<= 59)="">
  timep3 = timep3 + 1
  If (timep3<= 9)="">
  timep3 = Concat ("0", timep3)
  xfa.host.messageBox (timep1)
  endif
  timeIn = Concat (timep3, ":", "00")
  endif

  LunchInterval = Time2Num (timeout, "HH: mm")-Time2Num (timeIn, "HH: mm")
  on the other
  LunchInterval = 0
  endif

  var EndInterval

  If (HasValue ($.parent.)) OUTA1 [2]) and HasValue ($.parent.) INA1 [2])) then
  timeStamp = $.parent. OUTA1 .formattedValue [2]
  Cat = At(timeStamp,":")
  timep1 = (timestamp, Cat-1) Left
  timep2 = Right (timeStamp, len (timeStamp) - Cat)

  timeStamp = $.parent. INA1 .formattedValue [2]
  Cat = At(timeStamp,":")
  timep3 = (timestamp, Cat-1) Left
  timep4 = Right (timeStamp, len (timeStamp) - Cat)

  If (Ceil (timep1)< ceil(timep3))="">
  timep1 = timep1 + 12
  endif

  If (Ceil (timep2) > = 0 and Ceil (timep2))<= 7)="">
  timeOut = Concat (timep1, ":", "00")
  endif
  If (Ceil (timep2) > = 8 and Ceil (timep2))<= 22)="">
  timeOut = Concat (timep1, ":", "15")
  endif
  If (Ceil (timep2) > = 23 and Ceil (timep2))<= 37)="">
  timeOut = Concat (timep1, ":", "30")
  endif
  If (Ceil (timep2) > = 38 and Ceil (timep2))<= 52)="">
  timeOut = Concat (timep1, ":", "45")
  endif
  If (Ceil (timep2) > = 53 and Ceil (timep2))<= 59)="">
  timep1 = timep1 + 1
  If (timep1<= 9)="">
  timep1 = "" + Concat ("0", timep1) ".
  xfa.host.messageBox (timep1)
  endif
  timeOut = Concat (timep1, ":", "00")
  endif

  If (Ceil (timep4) > = 0 and Ceil (timep4))<= 7)="">
  timeIn = Concat (timep3, ":", "00")
  endif
  If (Ceil (timep4) > = 8 and Ceil (timep4))<= 22)="">
  timeIn = Concat (timep3, ":", "15")
  endif
  If (Ceil (timep4) > = 23 and Ceil (timep4))<= 37)="">
  timeIn = Concat (timep3, ":", "30")
  endif
  If (Ceil (timep4) > = 38 and Ceil (timep4))<= 52)="">
  timeIn = Concat (timep3, ":", "45")
  endif
  If (Ceil (timep4) > = 53 and Ceil (timep4))<= 59)="">
  timep3 = timep3 + 1
  If (timep3<= 9)="">
  timep3 = Concat ("0", timep3)
  xfa.host.messageBox (timep1)
  endif
  timeIn = Concat (timep3, ":", "00")
  endif

  EndInterval = Time2Num (timeout, "HH: mm")-Time2Num (timeIn, "HH: mm")
  on the other
  EndInterval = 0
  endif

  calculate the total time in hours from the value in milliseconds
  Round (sum (StartInterval, LunchInterval, EndInterval) / 3600000,2)

• Big numbers get rounded. Why?

  Hello
  
  When I try to save a large number to the database, the JDBC Oracle driver performs some strange round. For example, the next number in the database record number 9999999999999999.00 product: 10000000000000000.00.
  
  Here's how to reproduce the problem:
  
  1. database:

  create table big_num (id  number(18),   num number(19,2)); alter table big_num   add constraint big_num_pk primary key (id); create sequence big_num_seq   start with 1   nocache;

  2. JDBC code:

   PreparedStatement cs = conn.prepareStatement("insert into big_num(id, num) values (?, ?)"); cs.setLong(1, 1L); cs.setBigDecimal(2, new BigDecimal("9999999999999999.00")); //PreparedStatement cs = conn.prepareStatement("insert into big_num(id, num) values (1, 9999999999999999.00)"); cs.executeUpdate(); conn.commit();

  So, after running the program, here's what's in the database:

  SQL> select * from big_num;                 ID                  NUM ------------------- ---------------------                   1  10000000000000000,00

  I use the JDBC driver which comes with Oracle 10.2 data base version.
  
  It does NOT matter that I use bind variable or not. The same problem happens anyway.
  
  Is there something I can do to help this district would not occur?
  
  Best regards
  Biser
  
  P.S. I also tried with the following versions of the JDBC driver:
  
  1 oracle Database 11 g Release 1 (11.1.0.7.0) drivers JDBC
  1.1 ojdbc5.jar
  1.2 ojdbc6.jar
  2 oracle Database 10 g Release 2 (10.2.0.4) driver JDBC
  2.1 ojdbc14.jar is
  
  No chance! The same problem occurs.

  If this fails / tours, it is a question of DBMS, not a JDBC question.

  ("insert into big_num (id, num) values (1, 9999999999999999.00)');

• Distance and rounds of training swimming errors

  Hello...

  I have the new Apple Watch series 2. I make the swim in our pool inner community twice a week, and I used the new watch swimming twice now. Both times the watch Gets the distance of towers and evil. Here are some details:

  Our community pool is 25 yards - long we checked this by measuring it ourselves. I use the session pool swim.

  The first time I used the watch, I swam 44 laps, which is 1 100 yards. Training app reported that I had made 62 laps and 1 550 yards.

  The second time (today), I swam 50 laps, which is 1250 yards. Training app reported that I had made, 80 laps and 2000 yards.

  I always swim in the same way,-1 lap breaststroke of 2 rounds side stroke, rear race 1 lap. Then, again. I don't have flip turn.

  Any ideas or help greatly appreciated.

  Hello

  I suggest that raise you this issue with Apple supports, taking advantage of your initial 90 days of free technical support by phone of the coverage:

  • Contact - Support official Apple
  • https://Twitter.com/applesupport
  • http://www.Apple.com/retail/Geniusbar/

• How to round the corners of the webpage of the tabs in Firefox?

  I am accustomed to having rounded edges on the tabs of the Web page in Firefox. I work in Windows 8, and the legs are square. What can I do to change their appearance?

  Do you use the extension classic restaurateur theme?

  • Firefox, the menu/Tools button > Modules > Extensions

  If this is the case then check the appearance of the tab settings.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• rounding of Firefox buttons display problem

  Hello

  It seems that Firefox has issues with the rounded buttons (AFAIK).

  I'll post some screenshots to demonstrate:

  http://screencast.com/t/EJ2wIJMrna

  a refresh of the page itself, produces different artifacts of the same nature:

  http://screencast.com/t/NBqrrqTQVp8

  Sometimes, if you refresh a page enough times, you might not get these artifacts.

  The Web page on the screenshots is: https://developer.mozilla.org/en-US/docs/Web/CSS/border-radius but I saw this question on a lot of pages, sometimes even on the Google search page.

  I am running the most recent version, official, stable Firefox, but I noticed this problem for at least the last 2-3 versions of the browser.

  You can try disabling OMTC and leave hardware acceleration in active Firefox.

  • topic: config page: layers.offmainthreadcomposition.enabled = false

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can try to disable hardware acceleration in Firefox.

  • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

  You will need to close and restart Firefox after enabling/disabling this setting.

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • https://support.Mozilla.org/KB/upgrade-graphics-drivers-use-hardware-acceleration

• Just updated Firefox to update with new rounded tabs... How can I switch to old square tabs?

  Just updated Firefox to update with new rounded tabs... How can I switch to old square tabs?

  Many of us use
  
  Restorer Classic theme (Customize Australis)
  
  Restore the tabs squared, appmenu, modules, small display bar icons and more on Australis UI (Windows/MacOSX/Linux + Fx 29 +).

• Adding accents for Pinyin El Capitan 10.11.5. I don't have a pinyin tonal accents 3 which looks like a rounded only on the bottom or slightly flattened v U.

  Adding accents for Pinyin El Capitan 10.11.5. I have no accent mark tonal pinyin 3 which looks like a rounded v only on the bottom or a little flattened U. I tried using simplified pinyin but makes me Chinese characters when tapped. I found a keyboard in the system of preferences that has this accent mark however the accent mark appears to the right of the typed letter emphasis must be on the letter typed. Any ideas?

  Best regards Raymond

  To type pinyin normally you use the ABC Extended keyboard layout (formerly US extended).  A list of the shortcuts is to

  http://symbolcodes.TLT.PSU.edu/accents/codemacext.html

  3 Tone is the caron, who is really a form of v.

  You shouldn't have any problem getting it above the letter, if you use the v option, then the vowel in ABC Extended.  ǍĚǑǓ

• Round amount upwards or downwards by the numbers?

  I'm pretty new to numbers v3.6.2 so while I am very proud of my success with my effort first, very ambitious, I know I'll be defeated by a combination of the FI and around formulas. Then help with the following query gratefully received it please:

  I want to turn a series of cells upward or down to the nearest round number according to them being below or above the median.50.  IE: 16.34 becoming 16 and 16,79 become 17.  The cells can contain up to six figures (plus the two decimal points.)

  Please treat me as a novice and provide the complete formula!  Thank you very much.

  There is a function in figures aptly called "ROUND()" that takes two arguments:

  Round (number, places)

  num is the value to round

  places specifies how many digits to round

  assuming that the data is in cell A1, you can round the value as follows:

  = round (A1, 2)

• Numbers rounded to a certain extent the price

  3.6.1 numbers question: I need help with a formula of round our price to xx.95 results. Where each product is an avec.95 price. I tried roundup and ceiling and cannot understand it. Thank you very much!

  Bill,

  Here is a simple solution that has a hole (in my opinion):

  

  column A contains the current prices and B contains the values "corrected".  From line 8, you can see that the prices are reduced by this method.  What is your intention?  You can share what you want the rule to the prices of the inputs between x.95 and x.99?

  the formula is:

  = INT (A1) + 0.95

  B1 = INT (A1) + 0.95

  This is the shortcut dethrone select cell B1 and type (tor copy and paste here) the formula:

  = INT (A1) + 0.95

  now select cell B1, copy

  Select cells B1 at the end of column B, paste